MOBILEME GALLERY in sidebar not being converted to iPhoto11 from iPhoto09

o Have factory fresh Mac Pro with iPhoto 11 (9.1.1)
o Copied over an iPhoto Library, created in iPhoto 09 (8.1.2) on a G5 running OSX 10.5.8, to the Mac Pro's hard disk. iPhoto Library that was copied includes photos, ALBUMS and MOBILEME GALLERY albums (MMGA), all listed in iPhoto 09's sidebar on the left. MMGA were the source to create the current gallery of albums with photos on my MobileMe account.
o On Mac Pro launched, via double click, the iPhoto09 Library that was copied from over from the G5
o iPhoto 11 converted incoming info and all seems ok except sidebar at left does not list my MOBILEME GALLERY albums, rather it only lists
- LIBRARY RECENT ALBUMS PROJECTS but no MOBILEME GALLERY
How do I get these albums listed in my left sidebar under MOBILEME GALLERY?
Don't the MOBILEME GALLERY albums convert from iPhoto09 to iPhoto11?
Moderators - I also posted this in the iPhoto09 section. Probably should be deleted there as more applicable to iPhoto11. Thanks - STL

Turns out the albums associated with MobileMe albums will be listed under WEB in the sidebar. I generated a small album for MobileMe in iPhoto11 and the WEB identifier appeared with my mobileme identifier underneath. Albums in my MobileMe gallery were then listed in the iPhoto window. I don't have clue why this happened.
I would appreciate an explanation by someone that understands why I encountered this issue.
Anyway, it seems to be working now although 11's sidebar identifiers are different than 09's.

Similar Messages

Special character not being converted to upper case

Hi all,
I have an issue with special characters and upper/lower case.
The character "ü" is in one of the values of an InfoObject and when loading we get an error message for this value. The character "Ü" is in RSKC, but still we are getting an error when loading.
We are converting the values to upper case in the transfer rules, but this special character is not being converted to upper case...
We start with the value "Heüringen" and after conversion we have the value "HEüRINGEN" where we want to have "HEÜRINGEN".
Do you have any idea why this characer is not being converted?
Any ideas are welcome!
Best regards,
TMV

Hi Praveen,
What does this module actually do? What kind of characters will the special chars be replaced with?
Br,
TMV

Excise invoice not getting converted into INR from USD for an IMPORT PO

Hi All
I have posted one Import PO. Did MIRO for custom and CVD. MIRO doc was in USD which is getting converted into INR as per the exchange rate maintained in OB08.
Then I did MIGO with the ref of comm invoice of MIRO. Now MIGO doc is posted in INR as per exchange rate maintained in OB08 for custome duty and Freight and base value.
For Excise invoice , CVD is getting captured but in excise tab, base amount is showing in INR and currency also shows INR which is correct.
Total Basic duty (BED) , Cess and Hecess iamount s coming in USD but curency is showing INR. After posting the doc also it has not getting converted into INR and the same USD amounts got posted in Excise GLs and currency still showing INR.
For example:--
PO value shows
Base Price - 2040.20   USD
Custome   -     204.20    USD
CVD         -      179.54    USD
Cess on CVD      3.59    USD
H Cess on CVd 22.44 USD
Now in excise invoice in Excise item tab
Base value - 99960 INR (converted at teh rate of 49 , exch rate type M)
BED -   179.54 INR
CESS - 3.59 INR
HECESS 22.44 INR
Here only currency is changed to INR but amounts are still in USD. After posting the doc also same result is coming, hence Registers are getting updated with wrong values.
Can any one suggest what to do to correct this.
Regds
Mukta
Customization for CVD maintained in Excise config -- company code setting- exchange rate type for CVD is M.
OB08 maintained for USD to INR for the current date.

HI Tej
All the Import cycle has created three documents.
1. MIRO doc for custom duties and CVD .--   MIRO posted in USD . I can see the doc in both currency - INr and USD via accounting doc - display currency. I do not have any issue.
2. MIGO doc - for custom duty and Freight -   MIGO posted in INR , I can see accounting doc in USD and INR both via accounting document- Display currency and even in the MIGO -- purchase order history tab.
3. Excise Invoice - for CVD - EX Invoice posted in diifferent way --
In this document please note amounts for CVD is as per USD rate , but currency showing is INR , which is a mismatch.
in Excise customization for company code setting - exchange rate type M is maintained. OB08 is also maintained for USD/INR
Condition type JCV1 is also marked with currency conversion and accruals.
Is there any patch or note I need to apply to getting this converted , or any process issue.
Regds
Mukta

Status/Delivery Documents not being updated in C4C from ECC on PGI

Hi,
We are integrating SAP C4C with ERP via HCI. We have created a followup ‘Sales Order’ from an opportunity in C4C.
On creating the followup sales order this gets created in SAP ERP & we get back the sales order/inquiry number in C4C,but we do not get any status.
Also for the sales order when we try to deliver or do a ‘Post Goods Issue’ in ERP and we deliver goods the document flow in ERP shows’ ‘delivery number’ etc but these statuses are not being updated in C4C.
We have already configured the 'Communication Arrangements ' in C4C, with this scenario as below,
Opportunity with followup business Transaction in ERP ------ > Update opportunity from followup business transaction document.
In HCI we have configured the following template in eclipse :
ERP to Cod Opportunity Replicate
So,C4C still has just two entries one for inquiry & one for sales order with just the number and no other followup documents details/status ,say PGI --delivery document number etc.Can you kindly help.
Thanks
Indrasish

Hello Indrasish,
If I am not wrong you might be using the URL for Outbound Channel that is mentioned in Catalog (standard scenarios for HCI on HCI tenant). Mind that the Outbound URL for Pricing, Query Sales Quote and Query Sales Order Scenario should be picked up from Services for same which we can get from SICF on ECC. These URL structures are also maintained in 1402 standard document for ERP integration using HCI. Yet mentioning them below:
u
These URL paths are to be maintained in the Outbound Channel on artifacts related to Request Pricing, Query Sales Quote and Query Sales Order.
Let me know if this is what you were expecting and if this solves your issue.
Regards,
Chandan

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Routes not being followed after upgrade from ES to ES2

We are upgrading from ES to ES2 and now our routes are not working.
We have 2 routes leaving an AssignTask operation, Deny and Approve. The users get assinged their form, they make any required changes, and then click one of these buttons to complete the process. In ES this works fine. In ES2 they can see the buttons, but when they click them the route is not being followed and the process remains stuck at the AssignTask operation.
If they close the form they can use the approve or deny icons on the task summary panel but they loose any changes they have made.
Any help would be greatly appreciated.

Behavior change...?
SELECT xmlelement("TestMsg",
                    xmlelement("MESSAGE",
                    XMLFOREST(m.tx_id   "MsgNum",
                              m.tx_type "MsgTyp"
                    )) ut_xml
FROM (select 1 tx_id, 'test' tx_type from dual) m
will give output in 10.2.0.4.0 EE
UT_XML
<TestMsg>
   <MESSAGE>
      <MsgNum>1</MsgNum>
      <MsgTyp>test</MsgTyp>
   </MESSAGE>
</TestMsg>Edited by: Marco Gralike on Mar 29, 2011 1:07 PM

Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

Graphics in Power Point not being converted to PDF

Hi guys
I'm trying to convert a Power Point 2010 document to a PDF using Acrobat XI Pro
below is what happens before and after the conversion....
....the graphics disappear.
In the Power Point document editing is enabled.
In Power Point i can only select the text and not the orange graphic.
When using "combined files" within Acrobat or the Acrobat tab within Power Point 2010 I get the same results.
Does anyone know a fix?
Thanks
Jamie

Make sure you have applied all updated to Acrobat XI (Help->check for updates). If you can still reproduce the problem, would it be possible for you to share a file that demonstrates the problem?

Aperture to MobileMe gallery - shots are not sharp

I use both Zenfolio and MobileMe and export from Aperture 2 to both of these sites, but my photos on MobileMe look a bit fuzzy on MobileMe, while they look great in Zenfolio. Anyone have this issue or have any tips?
THanks,
Peter

I also want to add to what Mr Endo said...
A) It shouldn't be possible to select a folder and then have the option of publishing to Mobile Me, Facebook or Flickr. For me those are all grayed out when I have a folder selected in the sidebar.
B) Are you referring to a project or an album by chance? If so, then you will need to select the photos, in the Browser, before choosing to upload to an online service.
Cheers,
Owen

SC not being converted to PO

Hi Gurus,
Right now, we're having some troubles with a Shopping Cart that got stuck on Approved status and doesn't appear in the Carry Out Sourcing.
Per what I see in BBP_PD:
HEADER     I1009          Held                           X
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1039          Incomplete                     X
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
(held, awapproval and incomplete in red)
I tried with FM BBP_PD_SC_STATUS_CHANGE_WF and got error: Error changing to status RELS , System status APPR is active.
Can you help us, please?
Thank you.

Hi Melina
SOURCE_REL_IND Indicator is marked with YES value, so, this is not an option anymore I think.
In Define Sourcing for Product Categories there're only 2 rows:
- Cat ID *, with no Source System defined and Sourcing "Sourcing Carried Out for Items Without Assigned Source of Supply".
- Cat ID xxxxx, with a Source system defined and Sourcing "Sourcing Carried Out for Items Without Assigned Source of Supply".
Looks like the Prod Cat used in the SC is defined (scenario is Extended Classic)
The Indicator is defined and the Prod Cat too.. is something else I could check to validate why this SC is stucked and not going to sourcing?
One confused thing I found in the Partner information from the SC, in bbp_pd.. it doesn't have Ship-To Address information... could this be related?
Thank you

Graphics Not Being Converted

I have tried converting several pdf documents to word and no graphics are produced in any of the conversions.

Good day,
If your PDF document already contains renderable (selectable) text, try turning off the 'Recognize text' option before converting your document, then give it another try.
Let us know how it goes!
-David

BeanInfo not being found when running from a JSP in WebLogic 6.1

Hi,
I wrote a BeanInfo base class for dynamically building HTML Tables using an array of beans. I wrote the code and tested it all using the command line and verified that the Beans were dynamically loading and displaying based upon the rules I had defined in the base class. Basically I was using the Introspector to find the class. When I transfered the code into a JSP running on WebLogic 6.1 it is never finding my BeanInfo. I even tried having the end BeanInfo be the bean itself (Had the Bean extend the BeanInfo). Still didn't find it and keeps giving me the default (or GenericBeanInfo) class to represent my Bean when calling the Introspector.getBeanInfo. I am making sure that my Introspector.setBeanInfoSearchPath is being done correctly. Like I said it is working ont the command line.
Why is the Introspector not finding the correct BeanInfo class for my Bean when I do it inside of a JSP?

Never mind, I figured out what is wrong. It always returns the GenericBeanInfo but it still goes throught the motions of calling the underlying BeanInfo.
So, ignoe. I can't delete the topic.

Downloaded word documents not being identified as originating from another computer

Not sure if anyone else has noticed this or knows how to solve it. If you download a PDF file or Word file from the internet in Firefox 25.0, 26.0 or 27.0 (does not occur in 25.0.1) the file is not identified as originating from the internet and thus is not opened in protected view. If you download in 25.0.1 it works as intended. I also notice that files downloaded in 27.0 don’t get saved in the specified user location, but somehow defaults to C:\Users\owner\Downloads. Ideas anyone? A fresh install does not seem to change this behavior. Thanks in advance.

On the security point:
In the past, Firefox marked all downloads as originating from the internet so that it triggered Windows' attachment security feature. Users could disable that by setting the preference browser.download.manager.scanWhenDone to false.
Starting in Firefox 26, zone marking of downloads is done only for executables. Users can disable even that zone marking by setting the preference browser.download.saveZoneInformation to false in about:config.
This change was to improve performance; this mail thread has the background: https://mail.mozilla.org/pipermail/firefox-dev/2013-August/000848.html
However, there was pushback because some nonexecutable files can be unsafe, such as ZIP archives. A change has been implemented for Firefox 29 to behave more like other browsers: if the user has the Windows default settting to zone mark downloads, they will be zone marked. See: [https://bugzilla.mozilla.org/show_bug.cgi?id=952961 Bug 952961 – Firefox 26+ does not mark downloaded non-executables as coming from Internet zone].
I'm not sure whether that change will be uplifted to Firefox 28 (beta), but it seems as though there is enough time, so probably. However, I think there is pretty much zero chance that it could find its way into a point update for Firefox 27.

Emails are not being received if sent from iPhone or iPad, but MBA OK

I've used my iPhone and iPad a lot to send messages to various email addresses at a specific company. They've always gone through without problem, but suddenly they're not coming through. They aren't in the SPAM folder and haven't been quarantined either. Messages sent from my MacBook Air go through successfully.
It doesn't matter which email account I send the message through, what the content is, or who I send it to. No one else is having problems sending emails from their iPhones or iPads.
Any help is appreciated. Thank you!

No longer a problem. The emails I sent finally showed up.

How to uninstall manually Adobe Reader XI in a corrupted install and not being able to uninstall from control panel

It seems that Adobe Reader X1(11.0.0.9) installed and the installation was corrupted. It now opens up the Windows help center automatically. Booting the computer in safe mode and trying to unistall in the control panel, I get the Windows Installer Servicee could not be accessed. I am able to uninstall other programs with no problem.
can someone help?

One way is to download again and install, then uninstall. That sometimes resolves the issue. To clear the registry of Acrobat and Reader (this is the Acrobat forum by the way, Reader is another forum), use http://labs.adobe.com/downloads/acrobatcleaner.html.

MOBILEME GALLERY in sidebar not being converted to iPhoto11 from iPhoto09

Similar Messages

Maybe you are looking for