MobileMe mail using Mail.app
Is it possible to set @me.com mail not as IMAP, but POP? I used to do it using Entourage, but now I got rid of Microsoft Office and the only option I see when I set up @me account is IMAP.
Roger,
If your post was back to me, then am I misunderstanding? The link I provided clearly states you must ask permission:
Note: IMAP is the preferred protocol for MobileMe email accounts. If you would like to use POP3 with your MobileMe email account, please contact MobileMe Support and request that POP3 access be enabled. See Choosing POP or IMAP for your MobileMe email for more information.
Ernie
Similar Messages
-
Can't down load mail using mail app
Can't down load mail using mail app OS, I already delete the com.apple.mail.plist but didn't work, it can connect to the server and in the progress bar, it appear: incoming messages ex. 39 of 39 but 0kb of transmission. And if I go to the Account info window, I can see the messages on the server, as well as the subject, date received, and the size of them. So, the mail, does connect to the server and see the new mail, but just doesn't download them. I also tried delete the mailbox and create a new one, but the same result.
If I use web mail I can see the mails.
Any clue to fix it.Hi!
I have the same problem, when I go on apple store and look for the Netflix app, it won't found it and when I'm on google I'd tape Netflix app, I click on the link which opens AppStore and a message comes saying "your request cannot be found" please help!!! Thank you
Abi -
HT5225 unable to send receive mail using Mail 2.1.3
Ever since iCloud took over, I am no longer able to send/receive mail using Mail 2.1.3 on my 10.4.11 version. I didn't think it would affect it. Someone please help as to how I can rectify the issue!
Hi,
Please review the following note:
Note: 371830.1 - Notification Mailer Does Not Start, Remains In Status Starting
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=371830.1
If the above does not help, I suggest you run "Workflow Diagnostics" test and see if it returns any error/warning messages.
Note: 274764.1 - Oracle Workflow Cartridge Workflow Java Mailer Setup Test
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=274764.1
Note: 378281.1 - How Does One Verify The Notification Mailer Is Functioning Properly?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=378281.1
Regards,
Hussein -
Can't send e-mail using Mail. Entourage works fine with same settings.
I can't send e-mail using Mail. Using exactly the same settings on Entourage everything works fine.
Until earlier today (for two days only) I couldn't send either. I was advised to run Keychain Access First Aid which spotted "Item “pop3.freezone.co.uk” is a duplicate; this item's port attribute is not set" and then repaired it (Freezone is the name of my ISP). Now I can send Mail but not receive.
Even stranger is that until today I could receive Mail on one of my two accounts, while only Mail from one person got through on the other. Now no mail is arriving.
I tried swapping the plist file for an older version from a backup of my system. That didn't work either.
I'm tearing my hair out! Any suggestions?No.
I'am sendig email from domain A using SMTP belonging to domain A.
The emails that's addressis is the same as senders (@grader.ee) are going out. But all others don't.
If there is wrong outgoing SMTP server even those emails can't send. -
Can't get .mac mail using Mail.app under 10.4.7
hi guys
this is an odd one - I simply cannot connect to the .mac mail servers using mail.app. I have tried deleting and recreating the accounts, no success.
Open to suggestions!
Internet connection is fine, and all other mail comes down fine...
-- jamesHello!
Still having the issue? If yes, please specify the Os & Macmail version you are using.
Kind Regards,
Alex -
No sounds of new mail using mail.app on iPad
Hello guys. I have a little trouble here. All the time when i recieve a new mail on my iPad, using mail.app, i do not hear any sounds at all. Only my ME.COM account under push notifications can make a sounds typical for apple new mail. What could it be? This is not a new problem, i had it long time ago, when i bought my iPad. What's strange, on my iPod touch 4G everything was just good. But may be all this stuff could happen to me cause i used my stored iPod backup to a new iPad?
I have 5 mail accounts, they all use fetch every 15 minutes.
Thank you!Kaynee,
In that case, I would also recommend that you check out Font Management in Mac OS X Tiger and Panther, by Kurt Lang.
For the Dock problem, find the com.apple.dock.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and check the Dock for default appearance/behavior.
;~) -
File to Mail using Mail Package
Hello,
I have a requirement where we receive a csv file having mutiple columns, one of them being the email address.
I need to get this email address from the file and send this file as an attachment to the same email address.(Dynamic email address)
I have used the Mail xsd and have done graphical mapping to achieve this.
Now,the problem is,if I use Mail package for dynamic email address,I am not able to get the source file as an attachment because the payload here is a mail structure.
If I get source file as an attachment using PayloadSwapBean and MessageTransformBean,I cannot have dynamic email address.
Can anyone please suggest a solution to this?
Thanks in advance for your help.
Regards,
ShwetaHi Stefan,
Thanks for the reply.
But I think,I am not able to understand the solution mentioned by you.
I can find following fields in ASMA mail adapter:
Meaning
Technical name
User
TServerLocation
Authentication Keys
TAuthKey
Mail header 'from' field
THeaderFROM
Mail header 'to' field
THeaderTO
Mail header 'Cc' field
THeaderCC
Mail header 'Bcc' field
THeaderBCC
Mail header 'subject' field
THeaderSUBJECT
Mail header field for reference to mail which is being replied to
THeaderIN-REPLY-TO
Mail header 'reply to' field
THeaderREPLY-TO
Mail header field for mail client program
THeaderX-MAILER
Mail header field for delivery acknowledgement
THeaderDISPOSITION-NOTIFICATION-TO
Mail header field for priority
THeaderPRIORITY
Mail header field for message importance
THeaderIMPORTANCE
I couldn't find a field related to attachments.
I can see the xml version of file in inbound message in SXI_MONITOR.
But after mapping,I get Mail package structure.
Could you please explain again.Sorry for this.
Thanks.
Regards,
Shweta -
Sending e-mail using Mail on a new AT&T modem
Since installing a new AT&T (Motorola) DSL modem, I cannot send e-mail using Apple Mail. AT&T tells me that it is a known issue with Apple, and that they will put me on "the list" for Apple to contact me. Has anyone gotten any satisfaction on this issue? Thank you.
I have experience the same email-related problem on both my new MacBook Pro and my iPod Touch.
- There are also times when I will start one or the other device and get a message on the screen that reads, in effect, that another device is using the connection and cannot connect the second. (I thought mutliple devices could use the connection at the same time as long as they had the router's password.)
- In addition, the connection will frequently disconnect, and I have to restart the modem to reconnect.
- I have recently installed an Apple Airport Express router (which works just fine), and subsequently had to replace the modem. That's when the troubles started. -
Can't send or receive mail using mail
I am posting for a new Mac user. We don't know all the terms so please be patient. She can get to webmail at sbc..... and use but can't use Mail to send or recieve. Help!
ibook running Tiger 10.4.4
dialup connection with sbcglobal.....
can use SBC webmail
have checked pop and smtp connections with sbc
Sbc says they can't help don't have mac mail instructions
Can anyone help? Is there something we are missing?
What good are they if they can't help?
rosieagAuthentication my ISP set to None in Mail---and
tutorial has no such thing authentication for her in
server settings? Also, under advanced
authentication mine is Password and the tutorial has
........(for password) I assume. We entered her
password.
We know the ports are important. Hers are set to 25
and 25. SSL is not checked
Help me keep straight on your setting versus hers. For the sbcglobal, in Advanced the Port should be 110 -- this is for the Incoming POP3 server.
In the Server Settings for the Outgoing server, the Port should be 25, and the Authentication set to Password, and the Username entry should be the full email address (this is different for some ISP, but SBC instructs to use the full email address), and of course the Password. In both place where Username is required, it should be the entire email address for her sbcglobal.
Have I missed anything? Do you still have your setup working AOK?
Ernie
BTW, I am a 61 year old, grandfather, but perhaps a little geekier than some! -
TS3276 Why can i suddenly not send out mail using mail through my ntlworld account
Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.
Why can I suddenly not send out mail using Apples Mail. My mail server is Ntlworld. I can send mail by going to Safari and loging into my mail account, but i would prefer to continue using Apples mail and my address book. Does anyone know what my problem could be. I haven't altered any settings.
-
Problem Sending Verizon Mail Using Mail Program
I have not had a problem sending Verizon mail from my Mail program prior to Mavericks. Now it is giving me fits. I do not have any troubke receiving mail.
This is what I get when I try and send mail through my Verizon account. Do I just check Always Trust and then Connect. There have been no Certificate issues prior to Maverick. What is going on? I did not get anything like this yesterday before I upgraded to Mavericks.This is what I get when I try and send an e-mail using my Verizon account in mail.
Message was edited by: Stamper -
AS ABOVE MY PROB IS I HAVE MANAGED TO STOP MY INCOMING MAILS FROM APPEARING BUT OUTGOING IS WORKING FINE. WOULD APPRECIATE SOME ADVICE. THANKS
Sabine,
What you report would be fully consistent with accessing your .mac account with a computer or mail client where the .mac account is setup as POP account.
With a .mac or IMAP account, if you happen to access the account from a computer or mail client that defaults to treat the account as POP, then often the further default is to download the messages, and further instruct the server to remove them. In other words, the IMAP or .mac account gets treated as a POP, and the messages are removed following download. It would make no difference how you had the setting on your primary computer, or primary mail client (Mail) -- the settings for server behavior are in each mail client, whether aboard more than one computer or not -- and would also be true of POP account selection of actions following initial download.
Remember, a .mac account acts like an IMAP account, and Inbox, is on the server, but the server will respond to being approached as though it is POP. The Dell would not have had an option to set the account type as .mac, so the proper choice would have been IMAP.
See:
http://docs.info.apple.com/article.html?artnum=52339
More info, please.
Ernie -
Advice on archiving mail using Mail and Gmail?
I use webbased gmail most of the time, but I do have the Mail app set up through imap, mostly as a backup (so I can access my mail when offline, so if gmail ever accidentally loses all my email I'll have it, etc). When I first configured it, it downloaded all my old mail (I think). I'm pretty sure that includes attachments, sent mail, everything. The only problem is my hard drive is getting kind of full and I want to clear off some space by moving stuff to my external drive. I'm thinking about moving a lot of my old email to my external drive, but I'm not sure the best way to do it. Will I still be able to access it through the Mail app? Will removing it make the Mail app just want to download all those messages from gmail again?
Ideally I'd like to set it up the way I use two iPhoto libraries and iPhoto Library Manager, but I have no idea how to do something like that for mail.
Help? Thanks!Terabithia wrote:
I thought there were problems with POP downloading duplicate messages or failing to download messages, that's why I wasn't using it. Does it work ok with gmail's archiving rather than deleting thing?
POP does not mainain any syncing once the messages have been downloaded so you can just move or delete any messages from a POP mailbox without fear of this happening on the server.
What if I archived my current mailbox, moved it to an external drive, and then switched to Pop. How would that work?
that could work and is an option. you can set gamil to only download POP messages that arrive from now on. that's done in gmail webmail->settings->POP/IMAP. you can archive your current IMAP gmail mailbox. then delete the gmail account in Mail and recreate it as POP.
but as I said, another option is to keep gmail IMAP but change what it keeps locally.
If I wanted to open one of my old messages from the archived mailbox, what program would it open in?
you'd have to import the whole archive back into Mail.
Would it all still be searchible through spotlight (when the drive is plugged in of course)?
no. Mail archives are not spotlight searchible. if you want that option instead of archiving using mailbox menu->archive mailbox you can do the following. quit mail. then go to the folder homedirectory/library/mail. locate the gmail imap folder inside and copy it to the external. it will then be searchible via spotlight and you could open individual messages too assuming you do have all messages completely downloaded to the hard drive now. -
How t o get the sunject in reciever mail using mail adapter
hi all.
i had created a file to mail scenario .
in archive mapping program it was defined to which mailids of reciever side should be mailed and the body of the mail.
but i just want to know if there are any settings under reciever mail adapter to get the subject uner reciever mails and an increment value (the number of times that the mailget posted in reciever mails) to be displayed in subject line of mail after descryption of the subject.
waiting for great answer.
cheers.
seeta ram.Hi Seeta,
you have to use a UDF in which you define a Container
http://help.sap.com/saphelp_erp2004/helpdata/en/75/8e0f8f3b0c2e4ea5f8d8f9faa9461a/frameset.htm
http://www.erpgenie.com/netweaver/xi/mapping1.htm
You can make a counter which increments every time you call the UDF.
Use the UDF in your mail package with the subject.
Hope this helps.
Dominic -
Data shown under reciever mail using mail adapter
hi.
i have created a file to mail interface ,created an imported archieve and i did tested
but i have got the data in mail as
Please find the attached document:
<table><tr BGCOLOR="#CCCC99"></tr><td></tr>005000002200 </td><tr></table>
where 005000002200 only is the data .
how can i remove all the othere stuff.
cheers.
sita ramHi.
hte foloowing is the my imported archieve program.
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://www.Coj.co.za/FileToProxyTriggeringFile">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes" />
<xsl:variable name="break"><br></xsl:variable>
<xsl:variable name="tableB"><table></xsl:variable>
<xsl:variable name="tableE"></table></xsl:variable>
<xsl:variable name="trB"><td></xsl:variable>
<xsl:variable name="trE"><tr></xsl:variable>
<xsl:variable name="tdB"></tr></xsl:variable>
<xsl:variable name="tdE"></td></xsl:variable>
<xsl:variable name="nbsp">&nbsp;</xsl:variable>
<xsl:variable name="thB"><tr BGCOLOR="#CCCC99"></xsl:variable>
<xsl:template match="/">
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>ABSA EFT confirmations</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content_Type>text/plain</Content_Type>
<Content>
<xsl:text xsl:space="preserve">Please find the attached document:</xsl:text>
<xsl:value-of select="$break" />
<xsl:value-of select="$break" />
<xsl:value-of select="$tableB" />
<xsl:value-of select="$thB" />
<xsl:value-of select="$tdB" />
<xsl:for-each select ="ns0:MT_FILESEND/REC/ROW">
<xsl:value-of select="$trB" />
<xsl:value-of select="$tdB" />
<xsl:value-of select="string1" />
<xsl:value-of select="$nbsp" />
<xsl:value-of select="$tdE" />
<xsl:value-of select="$trE" />
</xsl:for-each>
<xsl:value-of select="$tableE" />
</Content>
</ns1:Mail>
</xsl:template>
</xsl:stylesheet>
and the output thati got is
Please find the attached document:<br><br><table><tr BGCOLOR="#CCCC99"></tr><td></tr>005000004624 </td><tr></table>
and i can see the message in sxmb_moni.
and the FCC parametes that iam using is
ROW.endSeparator 'nl'
ROW.fieldNames string1
ROW.fieldFixedLengths 500
ROW.fieldSeparator 'nl'.
wwaiting for u r reply.
cheers.
sita ram.
Maybe you are looking for
-
Request timed out when purchasing music. Fresh install of Win7.
For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally dis
-
Control Strip in OS 9 won't start
I recently bought a 867 TiBook because I needed a faster notebook which would also boot into OS 9 for kids games. When booted into 9, the control strip will not start. I've replaced both the control panel and extension but with no success. My next st
-
I have a question about weblogic RMI , how can I resolve it.Thank you
I have a question about the weblogic RMI . I have a program.web services+weblogic RMI +Data Sources When I run the program in the console application.it is ok.But When i run it with the web services(it 'is mean Get some parameter and run the differen
-
Spry Accordian turns blue in IE 7 when selected.
Hello, I built a spry accordion which turns blue, actually all of the menu items, when selected in IE 7. What do I need to do? Thanks, Ed
-
Ok Ive scratched two digits of my iTunes card and can't redden it if anyone can help me please