Mobileme services has encontered a problem and need to close

any ideas to resolve this when I open Outlook 2007

Go into your Add/Remove Programs control panel and uninstall the MobileMe control panel for Windows. (The service has been discontinued, so the MobileMe control panel isn't actually doing you any benefit at all being there.)

Similar Messages

Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening? This problem started when itunes updated

Error code: MobileMe Services has encountered a problem and needs to close
I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

Hi turingtest2 (you pass, BTW): Thanks for the speedy reply. MobileMe doesn't appear in the list of programs which can be uninstalled. I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message: " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]" So googled this error & found a tool called (80072f8f) Repair Tool - I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

HT4436 i am receiving a message when I open Microsoft Outlook MobileMe Services has encountered a problem and needs to close. How can I resolve?

I am receiving a message when I attempt to open Microsoft Outlook on my PC. it says "MobileMe Services has encountered a problem and needs to close".
Does anyone know how I can resolve this problem?

Please see this thread:
https://discussions.apple.com/message/24830816#24830816

"Microsoft Sync Services has encountered a problem and needs to close"

whenever I try to sync entourage with iCal or Address Book, I get the following message: "Microsoft Sync Services has encountered a problem and needs to close". I can't seem to get it to stop. Anyone have any ideas?
Thanks!
Chris

I finally solve this problem in my imac....
For Snow Leopard (Mac OS X v10.6 Snow Leopard):
1 In the Finder, choose Utilities from the Go menu.
2 Open Terminal.
3 In the Terminal window, type or paste the following command on a single line:
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl reset
4 Press Return.
5 When the operation is complete quit Terminal.
For Leopard (Mac OS X v10.5 Leopard)
1. In the Finder, choose Utilities from the Go menu.
2. Open Terminal.
3. In the Terminal window that opens, type or paste the following command on a single line:
/System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
4. Press Return.
5. When the operation is complete quit Terminal.
Source: http://support.apple.com/kb/TS1627
Note: I'm using Snow leopard when I enter the command..it gives me some error however, I used the command for normal leopard it works for me no more annoying error sync...:) it may works on yours too worth of try.

Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480

Computer: eMachines T3025 Athlon
OS: Win XP SP3 (recent clean install)
Printer: HP J6480 on wireless network
Printer prints and scans fine wirelessly. I am using the "small footprint" HP drivers to print and scan.
After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the
'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close' error message and cannot print or scan any longer unless I shutdown and restart Windows.
I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
with the exception of changing the firewall setttings to allow hpqtra08.exe to run. This file is not found on my system in my install. The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
hpoews01.exe
hponicifs01.exe
hponicifs01.exe
hponicifs01.exe
hposid01.exe
hpqkygrp.exe
hpqtax08
hpznui08.exe
hpznui08.exe
hpznui08.exe
Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
hpiscnapp
hpoews01
hposid01
hposvc08
HpqApKil
hpqkygrp
hpqpprop
hpqqpawp
hpqtax08
hpqtbx01
HPqTrMgr
hpqwrg
hpsjrreg
What else do I need to do to solve this problem once and for all ?

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I use word for mac and keep getting an error message microsoft syn services has encountered a problem and needs to close. tell microsoft about this problem. even if i clicked send info to m/soft the message still comes up repeatedly i've turned comp off

i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

Outlook for Mac 2011 error: "Sync Services has encountered a problem and needs to close"

I keep getting the Syce services error. I did find
http://support.microsoft.com/kb/2547327, which fixed the problem only for a day or two. now the problem is back. I need a permanent solution, not one I have to keep repeating. Any ideas on how I keep this error from popping up?

Hi everyone,
I also met this issue before few days ago and I was looking forward a best solution for solving this issue too. In the midst of lot of answers
from different users and consultants, I got a blog that was recently published by someone, and then I move towards the blog beside that I discovered a nicer solution. It’s my personal experience. If any of you want to get free by barring this issue then you
also can try this solution once along with if you too wants to switch from Mac Outlook to Windows Outlook, here is a good solution for that matter too.
Helping link:
https://sites.google.com/site/errorsonmacoutlook/
Hope the above blog helps you too as it do it to me.

Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

Hi,
Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
update your AV soft then scan the virus.
The relate hot fix:
The Service Host process may stop unexpectedly in Windows Server 2003
http://support.microsoft.com/kb/932762/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close. We are

I get following message:
Adobe® Flash® Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience.
How can I solve this?

People,
Listen. This service is, has been and seemingly will be: FREE. So while emotions are running on the hot side of the guage, let's remember; it is FREE. Adobe owes no one anything. Now who's to blame, really? We, the people are to blame. Why? Because everyone has been ok with the fact that one company essentially designed and released a technology for streaming from the net. One company. And almost all of us are using this one company's technology to stream; for FREE.
But now we are not ok with it when, after we are prompted to update, we have the issue of it not working? We all never saw the ridiculously high potential for this one company to screw things up, intentionally or otherwise? What the ramifications, that we are now experiencing, might be? Nah, we just took it for granted that we would continue to be served. Well the serve came, everyone. Mistake or otherwise.
It's like this country [US], up until four-years ago. Everyone was either running around with snow shovels and hefty garbage bags to gather all the money they were making or sailing the seas of expectation and an, 'I am out there to get mine' attitude, and then the sh*t hits the fan and now people are complaining? About the very system until four years ago was spoon feeding them poolside with mai-tai's? While it was crushing everyone else in the known world?
No doubt it seems incredulous that a multi-billion dollar company has an IT department that would include in an update, for their own software, that would be inconducive to working. No doubt. But keep in mind: we are all either using browsers by Apple or MS. Anything happens to these browsers, including a virus or anything else that threatens our use of them and...?
So climb off the haughty, 'I deserve' crap and walk on the solid ground of trying to resolve this issue here at Adobe and around the net. If we were to band together, as the 99%, we could solve this, no problem. But then that holds true with resolving this fictitious economic downturn nonsense, that we solidly take for truth at face value, because our mainstream media says so. But no other species on this rock flying through space would know what the f*ck we were talking about.

'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

Hello,
Any idea how to fix this problem that casuses this error?
'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day. This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
'' Problem sending commands to the program"
Thank you
Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
Yesterday I started having this error message pop up when I first boot up my computer. I haven’t even started LabVIEW.
Recent changes:
6Jan08 Replaced motherboard and CPU.
6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition). Computer working fine.
8Jan08 Installed LabVIEW 8.0 Student Edition. LV is working fine and the message does not appear.
9Jan08 Download and install NiDAQ 8.6.1. Reboot the system and the above error shows up. LabVIEW works fine so far.
Anybody have any ideas on what the problem is? I have a screen shot of the actual message, but I can't load it on this page.
Oliver
[email protected]

Ipod service module has encountered a problem and needs to close

I have recently got a 80gb ipod video, but have been unable to use it, because no matter what I do I can't get it to appear in the source pane on itunes. Everytime I connect it to my PC I get a window up which says the "Ipod service module has encountered a problem and needs to close, sorry for the inconvenience etc"
I have followed ALL the instructions, including uninstalling itunes and quicktime (which I have done at least 7 times), reinstalling them with different settings on my computer. I have reinstalled a stand alone version of quicktime. I have tried restarting the ipod service, I have deleted all files from recycle bin and from Temp files. I have spoken to ipod at great length (3 different people, totalling approx 2hrs 30mins on the phone) and to a guy at Comet where I bought it from (20 mins on phone). Basically I have done everything I and anyone else can think of, but I still get the same message.
DOES ANYONE HAVE ANY OTHER SUGGESTIONS....PLEASE HELP I AM AT MY WITS END !!!
packard bell Windows XP
packard bell Windows XP

I get a window up which says the "Ipod service module has encountered a problem and needs to close, sorry for the inconvenience etc"
hmmmm. i don't have a solution to offer you at this stage. by we can try some general troubleshooting strategies to see if that can isolate the cause of the problem.
if you're game, we could start proceedings by trying a connection after a selective startup with just the itunes and quicktime background processes enabled. see:
Using MSCONFIG to troubleshoot conflicts in Windows
do you still get the crash after the selective startup?

Photoshop CS6 has encountered a problem and needs to close

I just download cs6 photoshop, I can successfully download the program but when I try and open it up I get an error that tells me "Adobe Photoshop CS6 has encountered a problem and needs to close. We are sorry for the inconvenience." I uninstalled photoshop and re installed it hopping this would work but it didn't. This is the error signature that is pulling up. also ran adobe support advisor and it found no problems. My system is xp version 2002 with service pack 3

Not much luck I'M afraid tried to understand all that was there this is all I could come up with, dose it help at all?
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 70 68 6f   ure pho
0018: 74 6f 73 68 6f 70 2e 65   toshop.e
0020: 78 65 20 31 33 2e 30 2e   xe 13.0.
0028: 30 2e 30 20 69 6e 20 70   0.0 in p
0030: 68 6f 74 6f 73 68 6f 70   hotoshop
0038: 2e 65 78 65 20 31 33 2e   .exe 13.
0040: 30 2e 30 2e 30 20 61 74   0.0.0 at
0048: 20 6f 66 66 73 65 74 20    offset
0050: 30 31 32 33 37 38 62 62   012378bb
0058: 0d 0a                     ..
Just came up with this also;
OS Name
Microsoft Windows XP Home Edition
Version
5.1.2600 Service Pack 3 Build 2600
OS Manufacturer
Microsoft Corporation
System Name
HAYWOOD
System Manufacturer
Compaq Presario 061
System Model
PX786AA-ABA SR1500NX NA530
System Type
X86-based PC
Processor
x86 Family 6 Model 10 Stepping 0 AuthenticAMD ~1999 Mhz
BIOS Version/Date
Phoenix Technologies, LTD 3.14, 3/9/2005
SMBIOS Version
2.4
Windows Directory
C:\WINDOWS
System Directory
C:\WINDOWS\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "5.1.2600.5512 (xpsp.080413-2111)"
User Name
HAYWOOD\Compaq_Owner
Time Zone
Eastern Standard Time
Total Physical Memory
1,024.00 MB
Available Physical Memory
352.92 MB
Total Virtual Memory
2.00 GB
Available Virtual Memory
1.96 GB
Page File Space
2.26 GB
Page File
C:\pagefile.sys

Adobe Flash CS5 has encountered a problem and needs to close

Hi,
I have two laptops. I have installed Adobe Flash CS5 in my first laptop (Windows XP). When I start the application, it shows the following message:
"Adobe Flash CS5 has encountered a problem and needs to close"
I have installed the Flash CS5 in my second laptop and it worked fine.
Error signature:
AppName: flash.exe AppVer: 11.0.0.485 ModName: updaternotifications.dll
ModVer: 1.0.0.64 Offset: 0006a8dc
Can anybody help?
Thanks.
Housea

try this also
1. Reset preferences:
To reset on Windows, delete:
C:\Documents and Settings\username\Local Settings\Application Data Adobe\Flash CS4\
C:\Windows\system32\Macromed\Flash\FlashAuthor.cfg
To reset on Mac OS X, delete:
/Users/username/Library/Preferences/Flash CS4 Preferences
/Users/username/Library/Preferences/Flash 10 MRU
/Users/username/Library/Preferences/com.adobe.flsh-10.0.plist
/User/%username%/Library/Application Support/Adobe/Flash CS4/
/Library/Application Support/Macromedia/FlashAuthor.cfg
2. Install the latest Flash update if available.
3. Install the latest version of Flash.
4. Install current Windows service packs and other updates.
5. Run Flash in a simplified mode (Windows). / Run Flash in safe mode (MAC OS - Refer to http://kb2.adobe.com/cps/404/kb404936.html)
Some applications or services may cause system errors or freezes when running concurrently with Flash. Services are specialized programs that perform functions to support other programs. Before starting Flash, disable other applications, including startup items (items that start automatically), and services.
To disable startup items and services, see "Disable startup items and services (Windows XP)" (TechNote kb404984).
To re-enable startup items and services:
1. Choose Start > Run, type msconfig, and click OK.
2. Choose Normal Startup on the General tab, click OK, and restart the computer.
Note: If unselected items were present on the Services or Startup tab, then you will need to unselect them again
6. Install Flash from the desktop.
7. Reinstall Flash in a simplified/safe (for MAC OS) mode.
8. Run Flash in a new user account.
9. Check for font problems.
10. Optimize handling of temporary files by Windows XP.
11. Set the virtual memory paging file to the default size.
12. Repair and defragment hard disks.
13. Scan the system for viruses.
14. Identify the file that causes the problem.
15. Install Adobe Flash CS4 on a different computer.

InterVideo WinDVR Application has encountered a problem and needs to close.

My TV Anywhere has suddenly stopoed working and the message "InterVideo WinDVR Application has encountered a problem and needs to close. We are sorry for the inconvenience." appears each time I try to open the program. MSI Radio works fine. I have uninstalled and re-installed the programe (originally MSIPVS now MSIPVS3). I did try to download the new Beta drivers just to try, but the zip file shows 0 bytes!
Has anyone come across this, or can anyone suggest what I can try to resolve the issue?
Many thanks in anticipation
Gareth

Jeremy:
I should point out that I am much more confident with software issues. I am not a hardware person and have never attempted to open up the box!
Realtek is the card on the motherboard.
I hope this is the information required:
OS Information:
Property   Value
OS Name     Microsoft Windows XP Professional|C:\WINDOWS|\Device\Harddisk0\Partition1
Service Pack     2.0
OS Manufacturer     Microsoft Corporation
Windows Directory     C:\WINDOWS
Processor:
Property   Value
Current Clock Speed     3000
Description     x86 Family 15 Model 2 Stepping 9
Manufacturer     GenuineIntel
Name     Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory (RAM):
Property   Value
Bank Label     RAS 0 & 1
Capacity     536870912
Bank Label     RAS 2 & 3
Capacity     536870912
Total Memory Deteced in Hardware: ~1024 MB
Memory Reported to Operating System: 1023MB
Disk Drives:
Property   Value
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Maxtor 6Y160M0
Media Type     Fixed hard disk media
Size     163921605120 (~153 GB)
Number of Partitions     2
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     Canon MP Memory Card USB Device
Media Type
Number of Partitions
Description     Disk drive
Manufacturer     (Standard disk drives)
Model     IC35L060 AVV207-0 USB Device
Media Type     Fixed hard disk media
Size     61492193280 (~57 GB)
Number of Partitions     1
Installed Printers:
Property   Value
Name     PaperPort Color Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Color Printer Driver
Name     PaperPort Black & White Image
Port Name     BIPORT
Default     False
Driver Name     PaperPort Mono Printer Driver
Name     Microsoft Office Document Image Writer
Port Name     Microsoft Document Imaging Writer Port:
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Name     Generic / Text Only
Port Name     LPT1:
Default     False
Driver Name     Generic / Text Only
Name     Canon MP370 Series Printer
Port Name     USB001
Default     True
Driver Name     Canon MP370 Series Printer
Name     Auto Microsoft Office Document Image Writer on GARETH-14ETIB74
Port Name     \\GARETH-14ETIB74\Printer
Default     False
Driver Name     Microsoft Office Document Image Writer Driver
Motherboard:
Property   Value
Manufacturer     MICRO-STAR INC.
Model
Name     Base Board
Part Number
Product     MS-6758
Serial Number     00000000
Version     2.00
BIOS:
Property   Value
Manufacturer     American Megatrends Inc.
Name     Version 1.00
Release Date     20040324000000.000000+000
Version     AMIINT - 10
Monitor:
Property   Value
Description     SyncMaster 173V/172V/173S/173B
Name     SyncMaster 173V/172V/173S/173B
Screen Height     768
Screen Width     1024
Keyboard:
Property   Value
Description     Easy Internet Keyboard
Pointing Device:
Property   Value
Manufacturer     Logitech
Name     HID-compliant Wheel Mouse
Sound Card:
Property   Value
Manufacturer     Creative Technology, Ltd.
Description     Creative EMU10K1 Audio Processor (WDM)
Device ID     PCI\VEN_1102&DEV_0002&SUBSYS_80661102&REV_0A\4&1F7DBC9F&0&08F0
Manufacturer     Realtek
Description     Realtek AC'97 Audio
Device ID     PCI\VEN_8086&DEV_24D5&SUBSYS_75851462&REV_02\3&13C0B0C5&0&FD
Video Card:
Property   Value
Adapter Compatibility     NVIDIA
Adapter RAM     268435456
Description     NVIDIA GeForce FX 5600XT
Installed Display Drivers     nv4_disp.dll
Driver Version     6.14.10.6693
Driver Date     29/10/2004 16:50:00
Video Mode Description     1024 x 768 x 4294967296 colors
DirectX Installation:
Property   Value
Version     6.03.01.0146
Modem:
Property   Value
Network Adapters:
Property   Value
Description     Intel(R) PRO/1000 CT Network Connection - Packet Scheduler Miniport
Description     Packet Scheduler Miniport
Description     Microsoft TV/Video Connection
Description     1394 Net Adapter
Description     1394 Net Adapter
External Ports:
Property   Value
External Reference Designator     Def
External Reference Designator     Sanjoy
Expansion Slots:
Property   Value
Slot Designation     PCI1
Slot Designation     PCI2
Slot Designation     PCI3
Slot Designation     PCI4
Slot Designation     PCI5
Slot Designation     AGP
Copy To Clipboard
I do very much appreciate the help from you all!
Gareth

Getting "adobe Reader has encountered a problem and needs to close

On Windows XP service pack 3. Adobe Reader X
Get "Adobe Reader has encountered a problem and needs to close." . I have uninstalled adibe and reinstalled it and problem came back within 2 weeks after working for a short time.

Try the following:
Uninstall Adobe Reader X
Reboot your computer
Delete directory C:\Program Files\Adobe\Reader 10.0
Download the EXE or the MSI installer from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.0/ and execute e.g. either of the following files:
AdbeRdr1010_en_US.exe
AdbeRdr1010_en_US.msi
Good luck!

Mobileme services has encontered a problem and need to close

Similar Messages

Maybe you are looking for