Mobileme services has encountered a problem

by open outlook 2007 appears MobileMe services has encountered a problem

See note 2 of Troubleshooting issues with iTunes for Windows updates.
tt2

Similar Messages

  • Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening?  This problem started when itunes updated

    Error code: MobileMe Services has encountered a problem and needs to close
    I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

    Hi turingtest2 (you pass, BTW):  Thanks for the speedy reply.  MobileMe doesn't appear in the list of programs which can be uninstalled.  I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message:  " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]"  So googled this error & found a tool called (80072f8f) Repair Tool   -  I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

  • HT4436 i am receiving a message when I open Microsoft Outlook MobileMe  Services has encountered a problem and needs to close.  How can I resolve?

    I am receiving a message when I attempt to open Microsoft Outlook on my PC.  it says "MobileMe Services has encountered a problem and needs to close".
    Does anyone know how I can resolve this problem?

    Please see this thread:
    https://discussions.apple.com/message/24830816#24830816

  • My software update for itunes showed on my pc a notice saying mobilme services has encountered a problem I reinstalled the software and still showing this problem on my PC I can not download the new version of my software for itunes.

    Please help, 
    I have a problem with installing a software update on my PC I have a a message that reads MobileMe Services has encountered a problemand needs
    to close.  I have taken uninstalled and installed it again it still shoes the message.  Please contact me.  I can't load the software.
    Diana Puskas

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • I use word for mac and keep getting an error message microsoft syn services has encountered a problem and needs to close.  tell microsoft about this problem. even if i clicked send info to m/soft the message still comes up repeatedly i've turned comp off

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

    i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

  • "Microsoft Sync Services has encountered a problem and needs to close"

    whenever I try to sync entourage with iCal or Address Book, I get the following message: "Microsoft Sync Services has encountered a problem and needs to close". I can't seem to get it to stop. Anyone have any ideas?
    Thanks!
    Chris

    I finally solve this problem in my imac....
    For Snow Leopard (Mac OS X v10.6 Snow Leopard):
    1 In the Finder, choose Utilities from the Go menu.
    2 Open Terminal.
    3 In the Terminal window, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl reset
    4 Press Return.
    5 When the operation is complete quit Terminal.
    For Leopard (Mac OS X v10.5 Leopard)
    1. In the Finder, choose Utilities from the Go menu.
    2. Open Terminal.
    3. In the Terminal window that opens, type or paste the following command on a single line:
    /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsync .pl full
    4. Press Return.
    5. When the operation is complete quit Terminal.
    Source: http://support.apple.com/kb/TS1627
    Note: I'm using Snow leopard when I enter the command..it gives me some error however, I used the command for normal leopard it works for me no more annoying error sync...:) it may works on yours too worth of try.

  • Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close - J6480

    Computer: eMachines T3025 Athlon
    OS: Win XP SP3 (recent clean install)
    Printer: HP J6480 on wireless network
    Printer prints and scans fine wirelessly.   I am using the "small footprint" HP drivers to print and scan.
    After some hours with printer connected to the computer wirelessly and printing or scanning, I eventually get the 
    'Generic Host Process For Win32 Services Has Encountered a Problem and Needs to Close'  error message and cannot print or scan any longer unless I shutdown and restart Windows.
    I have implemented all the fixes (download, reinstall, etc.) listed for this printer on the hp.com site - namely
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00273968&tmp_task=solveCategory&lc=en&dlc=en&cc...
    with the exception of changing the firewall setttings to allow hpqtra08.exe to run.  This file is not found on my system in my install.  The files that are allowed to bypass the firewall are shown below (duplicates listed as shown on my screen)
    hpoews01.exe
    hponicifs01.exe
    hponicifs01.exe
    hponicifs01.exe
    hposid01.exe
    hpqkygrp.exe
    hpqtax08
    hpznui08.exe
    hpznui08.exe
    hpznui08.exe
    Per the Firewall bypass instructions, the files available in the Digital Imaging\bin location on my machine are
    hpiscnapp
    hpoews01
    hposid01
    hposvc08
    HpqApKil
    hpqkygrp
    hpqpprop
    hpqqpawp
    hpqtax08
    hpqtbx01
    HPqTrMgr
    hpqwrg
    hpsjrreg
    What else do I need to do to solve this problem once and for all ?

    Hi,
    Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
    update your AV soft then scan the virus.
    The relate hot fix:
    The Service Host process may stop unexpectedly in Windows Server 2003
    http://support.microsoft.com/kb/932762/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Mobileme services has encontered a problem and need to close

    any ideas to resolve this when I open Outlook 2007

    Go into your Add/Remove Programs control panel and uninstall the MobileMe control panel for Windows. (The service has been discontinued, so the MobileMe control panel isn't actually doing you any benefit at all being there.)

  • Outlook for Mac 2011 error: "Sync Services has encountered a problem and needs to close"

    I keep getting the Syce services error.  I did find
    http://support.microsoft.com/kb/2547327, which fixed the problem only for a day or two.  now the problem is back.  I need a permanent solution, not one I have to keep repeating.  Any ideas on how I keep this error from popping up?

    Hi everyone,
    I also met this issue before few days ago and I was looking forward a best solution for solving this issue too. In the midst of lot of answers
    from different users and consultants, I got a blog that was recently published by someone, and then I move towards the blog beside that I discovered a nicer solution. It’s my personal experience. If any of you want to get free by barring this issue then you
    also can try this solution once along with if you too wants to switch from Mac Outlook to Windows Outlook, here is a good solution for that matter too.
    Helping link:
    https://sites.google.com/site/errorsonmacoutlook/
    Hope the above blog helps you too as it do it to me.

  • Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

    Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
    and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
    Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

    Hi,
    Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
    update your AV soft then scan the virus.
    The relate hot fix:
    The Service Host process may stop unexpectedly in Windows Server 2003
    http://support.microsoft.com/kb/932762/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close.  We are

    I get following message:
      Adobe® Flash® Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience.
    How can I solve this?

    People,
    Listen. This service is, has been and seemingly will be: FREE. So while emotions are running on the hot side of the guage, let's remember; it is FREE. Adobe owes no one anything. Now who's to blame, really? We, the people are to blame. Why? Because everyone has been ok with the fact that one company essentially designed and released a technology for streaming from the net. One company. And almost all of us are using this one company's technology to stream; for FREE.
    But now we are not ok with it when, after we are prompted to update, we have the issue of it not working? We all never saw the ridiculously high potential for this one company to screw things up, intentionally or otherwise? What the ramifications, that we are now experiencing, might be? Nah, we just took it for granted that we would continue to be served. Well the serve came, everyone. Mistake or otherwise.
    It's like this country [US], up until four-years ago. Everyone was either running around with snow shovels and hefty garbage bags to gather all the money they were making or sailing the seas of expectation and an, 'I am out there to get mine' attitude, and then the sh*t hits the fan and now people are complaining? About the very system until four years ago was spoon feeding them poolside with mai-tai's? While it was crushing everyone else in the known world?
    No doubt it seems incredulous that a multi-billion dollar company has an IT department that would include in an update, for their own software, that would be inconducive to working. No doubt. But keep in mind: we are all either using browsers by Apple or MS. Anything happens to these browsers, including a virus or anything else that threatens our use of them and...?
    So climb off the haughty, 'I deserve' crap and walk on the solid ground of trying to resolve this issue here at Adobe and around the net. If we were to band together, as the 99%, we could solve this, no problem. But then that holds true with resolving this fictitious economic downturn nonsense, that we solidly take for truth at face value, because our mainstream media says so. But no other species on this rock flying through space would know what the f*ck we were talking about.

  • 'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'

    Hello,
    Any idea how to fix this problem that casuses this error?
    'NI-PAL Service Manager has encountered a problem and needs to close. We are sorry for the inconvenience.'
    I have been re-loading LabVIEW 8.0.1 Pro Dev Sytem, NI-DAQ (Traditional) and NI-DAQmx, all day.  This probelm seems to be related to the fact that I can, no longer, create executables or open my .lvproj files, yielding the other error:
    '' Problem sending commands to the program"
    Thank you
    Message Edited by FLT CTRL 6 on 06-02-2006 03:41 PM

    NI-PAL service Manager has encountered a problem and needs to close.… tell Microsoft...10Jan08
    Yesterday I started having this error message pop up when I first boot up my computer.  I haven’t even started LabVIEW. 
    Recent changes:
    6Jan08 Replaced motherboard and CPU.
    6Jan08 Formatted hard drive and reinstalled software(Windows XP Home Edition).  Computer working fine.
    8Jan08 Installed LabVIEW 8.0 Student Edition.  LV is working fine and the message does not appear.
    9Jan08 Download and install NiDAQ 8.6.1.  Reboot the system and the above error shows up.  LabVIEW works fine so far.
    Anybody have any ideas on what the problem is?  I have a screen shot of the actual message, but I can't load it on this page.
    Oliver
    [email protected]

  • Error:  Flash Player  "Adobe Flash Player Update Service 11.3 r300 has encountered a problem ..."

    I get the following message as soon as I boot up my PC:
    "Adobe Flash Player Update Service 11.3 r300 has encountered a problem and needs to close. We are sorry for the inconvenience."
    Anyone else experiencing the same problem?
    According to Adobe, this is the first time they've heard of this issue.

    RE:
    23. jbacinti, --Jul 22, 2012 2:30 PM    in reply to Carolo43
    Unchecking auto updates does not stop the message for me.
    Sorry to hear that too.  I actually recommended this to a few friends who were having the same issue, and it worked for them.
    But, I'm wondering....  Have you tried disabling the check for updates settings in both the (Window's Control Panel's) Global settings manager and the (online) Global Notifications Settings panel?  (That's the one on this page -- http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l )  On that page, click on the "Globe with the Check Mark" tab and make sure that the box is blank.
    Hope this helps.
    Ortho_Fan

  • Ipod service module has encountered a problem and needs to close

    I have recently got a 80gb ipod video, but have been unable to use it, because no matter what I do I can't get it to appear in the source pane on itunes. Everytime I connect it to my PC I get a window up which says the "Ipod service module has encountered a problem and needs to close, sorry for the inconvenience etc"
    I have followed ALL the instructions, including uninstalling itunes and quicktime (which I have done at least 7 times), reinstalling them with different settings on my computer. I have reinstalled a stand alone version of quicktime. I have tried restarting the ipod service, I have deleted all files from recycle bin and from Temp files. I have spoken to ipod at great length (3 different people, totalling approx 2hrs 30mins on the phone) and to a guy at Comet where I bought it from (20 mins on phone). Basically I have done everything I and anyone else can think of, but I still get the same message.
    DOES ANYONE HAVE ANY OTHER SUGGESTIONS....PLEASE HELP I AM AT MY WITS END !!!
    packard bell   Windows XP  
    packard bell   Windows XP  

    I get a window up which says the "Ipod service module has encountered a problem and needs to close, sorry for the inconvenience etc"
    hmmmm. i don't have a solution to offer you at this stage. by we can try some general troubleshooting strategies to see if that can isolate the cause of the problem.
    if you're game, we could start proceedings by trying a connection after a selective startup with just the itunes and quicktime background processes enabled. see:
    Using MSCONFIG to troubleshoot conflicts in Windows
    do you still get the crash after the selective startup?

  • Error Message ipod Service Module has encountered a problem

    I have just upgraded to iTunes 10, for some reason I receive two error messages, see below:
    '*ipodServiceModule (32-Bit)has encountered a problem and needs to close, we are sorry for the inconvenience.*
    If I then plug my iPod in iTunes firstly it doesn't open up like it used to, therefore I manually open to sync my ipod, but it doesn't recognise it and I get another error message
    *'The software for communicating with the iPod is not installed correctly, please reinstall the iPods software.*
    I have uninstalled and reinstalled 5 times and rebooted each time, yet I still get this message, it was working fine with the earlier versions, can anyone advise what is wrong?
    Many thanks
    Lisa

    found this buried deep, deep in another thread courtesy of mooncow. i'm in no hurry to try to reinstall v10 anytime soon, but a few people in the thread tried this and said it works....
    OK, a colleague of mine and I have been looking at this to try and find a common factor, and I think we may have found one. This may sound like the latest from Department of the Weird but bear with me. It would explain why quite a lot, but not anything like all, XP SP3 users have hit this problem. It would explain why Apple may have missed it even though they may have done thorough testing.
    We discovered that a machine on which IPodService was failing to start with the subject error message had Data Execution Protection turned OFF in boot.ini. Data Execution Prevention (DEP) is a security feature intended to prevent an application or service from executing code from a non-executable memory region. See http://support.microsoft.com/kb/875352. The machine that was experiencing the failure had "/noexecute=alwaysoff" in boot.ini.
    We changed "/noexecute=alwaysoff" to "/noexecute=optin" in boot.ini, restarted Windows, and the IPodService started without error and has worked OK since.
    "/noexecute=optin" is the default setting. I don't know why our system had "/noexecute=alwaysoff", and I am not aware of any harm or problems that can be caused by changing it to "/noexecute=optin". NB, changing that setting to "/noexecute=optout" or "/noexecute=alwayson" CAN cause problems if you don't know what you're doing, so I don't recommend anything other than a change from "alwaysoff" to "optin".
    Anyway -- there is an alternative fix that people can try: edit your boot.ini (found in c:\boot.ini, which is usually a hidden file but you can open it in Notepad just by Open->c:\boot.ini) and change "/noexecute=alwaysoff" to "/noexecute=optin" (be careful not to change anything else in this file), save it, then restart Windows. I hope this helps folks. And if this helps Apple understand the problem and produce a fix, all the better.
    mooncow

Maybe you are looking for

  • Home Sharing no longer working / Windows 7

    Prior to about a week ago, home sharing from my computer worked fine with absolutely no issues. I have several Apple TVs (all generation 2) in my home which all streamed from my computer. I am streaming from iTunes on a Windows 7 PC. Now I am unable

  • Table of contents creation deletes text of entire document

    Every time I try to create a TOC for the document I'm working on, InDesign either tells me the TOC has been updated - in which case the entire text of the document has just disappeared - or else it loads the cursor and gives me nothing but the title

  • HT204053 logging into icloud on my ipod

    my icloud asks for another account password, how do I re-set to my account?

  • Exporting Master/Detail page in Flash...

    Hi... Is it possible to have a master/detail page created in Dreamweaver like these (ASP or PHP): http://www.macromedia.com/support/dreamweaver/building/master_detail_net/ http://www.macromedia.com/support/dreamweaver/building/master_detail_php/ to b

  • Migration from BO XI R2 to BI 4.0 issue

    Hi , we are migrating from BOXIR2 TO BI 4.0 through upgrade manager tool , we are choosing the incremental upgrade option , but it gives the error as attached after the summary screen . The screenshot of the error is as mentioned below Upgrade proces