MobileMe top-level folders not accepting mail messages

Strange thing...
Now that iPhone has "push" mail, I decided to take all my mail from Mail.app on my mac up to my MobileMe account. I wanted to do this as-is, but it's not quite that simple... However, the whole folder structure and all e-mails therein are now happily living in MobileMe.
Except that they are not! All the Top-Level folders that contain other folders are now white in Mail.app, and don't exist at all in MobileMe. It's as if all folders were one level higher than they should be - all folders directly contained in a white parent folder appear as top level folders in MobileMe!! On the iPhone, they do exist, but their names are greyed out. Both in Mail.app and on the iPhone, they are empty and you cannot add mail messages to them even though, in Mail.app "on my Mac" they still contain mail and will happily accept mail messages...
What gives? Is there something I need to do to change them from "folder folders" into "mail folders that happen to also have folders in them"???
G>

Not a single answer or post on this...
I decided to create new folders and add a dummy place holder message in them, then move over all the subfolders to this one. There was a bit of strange behaviour when synchronising with MobleMe (old folder disappeared without my deleting it, etc) but now all is well and all my top level folders can accept mails.
During the process, it seems like MobileMe didn't know that these folder existed - when renaming or deleting them, I do an error saying that they did not exist. Indeed, on MobileMe, they did not exist and this resulted in all the first level subfolders being at the top level in me.com - very messy. It looks a lot better now!
G>

Similar Messages

JES Messaging Server 6.0 will not accept mail alternate address

JES Messaging Server 6.0 will not accept mail alternate address
I have installed the Sun ONE Messaging server 6.0 as part of an evaluation of the Java Enterprise System. This was installed along with Directory Server 5.2 and Identity Server 6.1. During the installation I created a top level organization (o=internet) knowing that I would want to create multiple email domains within it and a default domain. After the installation was complete I used the User Management Utility (/opt/SUNWcomm/bin/commadmin) to create some users within the default domain. I provided each user with a primary email address ([email protected]) and an alternate email address (mailAleternateAddress = [email protected]).
In testing the system I find that the Messaging Server will not accept messages sent to the alternate email address whether sent from the same server (via Messenger Express) or from an external server. It returns the error message: 550 5.1.1 unknown or illegal alias.
In attempting to trouble shoot this problem I have watched the Directory Server's access log when such an email is sent. It shows a query using [email protected] even though the email message was sent to [email protected] In any event the DS finds the user, but the Messaging server rejects the message.
[date_time] conn=120 op=11 msgId=12 - SRCH base="o=domain.com,o=internet" scope=2 filter="(mail=[email protected])" attrs="preferredLanguage mail mailEq
uivalentAddress"
[date_time] conn=120 op=11 msgId=12 - RESULT err=0 tag=101 nentries=1 etime=0
[date_time] conn=120 op=12 msgId=13 - SRCH base="o=internet" scope=2 filter="(&(objectClass=sunManagedOrganization)(|(associatedDomain=host.domain.com)(sunPreferredDomain=host.domain.com)))" attrs=ALL
[date_time] conn=120 op=12 msgId=13 - RESULT err=0 tag=101 nentries=0 etime=0
Any suggestions to eliminate this problem would be appreciated.

Both the primary and alternate email addresses are the same as the domain of the user.
Here is what I want to do. Email is sent to a primary email server (not this machine). Mail for some users stays on that server to be read and mail for other users is moved to a geographically separate server (the one in question) by specifying that the mail be forwarded to the specific host: [email protected] > [email protected]
On this second server I want to host two (or more) independent email domains. I do not want one of the domains to be a subdomain of the other. So during the installation I used o=internet as the root suffix and then used a different default domain (representing one of the registered internet domains). After installation I used the commadmin tool to create a second domain so now I have what looks something like this:
o=internet,
__ou=People
__ou=Groups
__o=domain1
____ou=People
____ou=Groups
__o=domain2
____ou=People
____ou=Groups
I then created some users under domain1 and some under domain2 so one user's dn is:
uid=user, ou=people, o= domain1.com, o=internet.
Mail sent locally to user@ domain1.com gets delivered correctly, but sending to [email protected] does not.
host2.domain1.com is the fully qualified domain name of the server.

Not all Top level folders showing item count

Hi there, I have Aperture 3.2.2 running on OSX 10.6.8.
I use referenced files and a folder structure with a top folder and projects nested.
Some of my top level folders when clicked, show ALL images in the projects nested below. Others do not. When I examine them in finder, nothing jumps out at me that is different. Have you any experience with this happening? Thanks, Deb

Here is a screen shot. Some of the blue folders will show all images nested in the projects below, some show nothing. ie: 2013 shows all, but 2012, shows nothing. You must click on each individual project to reveal the items contained. I would like to click on each top level folder and see all items nested beneath. There must be something I'm doing different, but for the life of me, can't figure it out. Why some show and some don't.

Working around bogus top-level folders in catalog

I have a catalog originally created on Mac and then moved to Windows, and it has two poison top-level folders that cause various SDK methods to fail. For example, they cause catalog:setActiveSources({folder}) to have an assertion failure.
For one of the folders, folder:getPath() returns nil. For another of the folders, folder:getPath() returns a Windows UNC file path that doesn't exist. I discovered this heuristic for identifying these bogus folders:
function isValidTopLevelFolder (folder)
    local success, f = LrTasks.pcall (function ()
        return catalog:getFolderByPath (folder:getPath ()) end)
    return success and f
    end
I've already provided this catalog to Becky Sowada of Adobe, following up on a bug report in the feedback forum. But I thought this work-around might be of usefulness to others someday.

Not quite, what I wanted to do… But, I think I can work with the "Unified folder view".

Whenever i reply to an email i get message that receiver does not accept relay messages.

I have a work email. Whenever I set it up on my Iphone 5 I dont get my calendar. Whenever I try responding to an email I get message "receiver does not accept relay messages"

Your outgoing mail server settings is wrong. Go back in and make sure the password is correct.

AIM IM The message "Hello" could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?

AIM IM The message “Hello” could not be delivered. The other person appears to be offline. The user is not accepting offline messages. How do I change this setting?

HI,
The simple shortest answer is that you can't (Change a Buddy's settings)
From your own end you can reply to the first Off Line IM you get on an AIM login (an accompanying IM for AIMSysMessage asks if you want them to Continue - replying No stops them)
IF you have stopped Off Line IMS than you can reset this at AIM Settings
You can log in here with AIM and Apple IDs that end in @mac.com and @me.com (iCloud issued @me.com name are an Exception)
In addition the Setting in iChat > Preferences > General Section that refers to setting the Status to Off Line on Quit stops the App starting up if iChat is not launched but the computer is ON
8:16 PM Friday; March 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

"Top level objects not released" warning when accessing LabVIEW adapter through API

I'm having a problem when using the TestStand API in LabVIEW: I'm trying to get the VI path for a TestStand test step, but I'm getting the "Top level objects not released properly" warning. It doesn't look like I'm forgetting to close something, but obviously I am. Snippet is below, and warning text follows. Anyone have any ideas?
I'm using LabVIEW 2010 and TestStand 2010.
This forum has been a huge help. Thanks to everyone!
-Joe
References to PropertyObjects were not released properly. Total number of objects: 418 Number of top-level objects: 7
Note: Some top-level objects may be included if they are referenced by an incorrectly released top-level object. For example, an unreleased SequenceContext object references a SequenceFile object.
The following top-level objects were not released:
Type Definitions [6 object(s) not released] Type Definition #1: Name: FlexGStepAdditions
Type Definition #2: Name: VIParameter
Type Definition #3: Name: VIParameterElement
Type Definition #4: Name: NI_LabVIEWParameterResult
Type Definition #5: Name: Expression
Type Definition #6: Name: Path
And the following uncategoried objects: LabVIEWModule (FlexGStepAdditions) Name: SData
Solved!
Go to Solution.

Yep, that worked. I thought that Variant To Data was just converting the module reference to the LabVIEWModule data type, but apparently I was wrong... This TS leak checker is sure making me learn about how to properly close references... I've been programming memory leaks for years!
I was also having problems with LabVIEW crashing after the VI ran, and fixing the order of the close references fixed that, too.
Working code is below.
Thanks a lot (again) Doug.
-Joe

Mac mail will not accept new messages

been working fine but after trying to send a big photo file, MacMail stopped accepting new messages and requires minutes to send out new messages. I have checked and rechecked all parameters. help!

Have you quit and reopened Mail?
Empty the Mail cache in your Home Folder Library>Caches>com.apple.mail>Cache.db. Just move Cache.db out to the Trash -- not the enclosing folder -- with Mail closed. Don't empty the Trash. If it doesn't help, then just put it back.

How to make top level navigation not refresh

Hello Guys,
I have a question concerning on my External Facing Portal, my boss wants that when I click on a tab or a link in the Top Level Navigation , to load the content in the Content Area without refreshing the whole page, What I want is that when I click on a tab or link of the Top Level Navigation , the Top Level Navigation and the MasterHead not to refresh and that the content be loaded and refreshed only in the Content Area. The only way I know to do this is by making a frameset of my page and to make the masterhead and toplevel navigation a frame and the detalied navigation a frame and the content area a frame, and in the links to put the target property to the name of the content area frame, but I don't know if this is possible to do in the portal, I see that all is embedded and I don't know how to make a frameset like this in the portal.
Any highlights to solve this will sure be appreciated.
Thanks
Rewarding points will be given.
Luis

Hi,
When you are implementing External Facing Portal, i think you have used Light Framework Page. In Light Framework Page, only one Framework has been used, so when you click on the top level navigation, the whole page will get refresh, so there is no otherway as of my knowledge. If you use standard framework page in portal, it is possible to do (i.e. the content area only get refresh) and the concept of your External Facing Portal is eliminated here.
Regards,
Venkatesh. K
/* Points are Welcome */

How do I increase the size of the font for everything on my screen, not just mail messages?

How do I increase the font size throughout, not just in mail messages? Thank you.

Thank you, Lee, I appreciate your response, albeit the answer is disappointing. I will go into some of the applications, as you suggest, and give it a try. Thanks again!

Only detect presence or absence of top level folders.

If a top level folder is missing, please have Lightroom assume that all subfolders are missing on revmovable drives. If the drive is reattached and LT sees the top folder again, please let it assume that all the subfolders are there also, until we use a file that is not actually there.
Long winded waiting on drives after reconnection is not necessary. Or at least give us an option to tell Lightroom that the drive is actually there, don't bother checking further.

Unfortunately it does not working. I am using jboss AS 7.
Structure details:
- ear contains war
- the war contains the beans.xml (with alternative entry) in WEB-INF
- jar B is located in war in WEB-INF/lib (jar B contains also beans.xml in META-INF)
- injection point is in a JSF controller (jar in WEB-INF/lib in war)
Always I1 is injected. But I do not know if I explained it clearly. I1 is always present. I2 is optional but shall have a higher priority.

I keep getting a can not get mail message yet I'm getting mail

I Keep getting message "can not get mail" but im getting mail?

Hi Mel82384,
Do you have multiple email accounts on your iPhone? It is possible that one (or more) of them are functioning correctly and others are not. I would suggest that you troubleshoot using the steps in this article -
iOS: Troubleshooting Mail
Thanks for using Apple Support Communities.
Best,
Brett L

Trackpad will not open mail messages

After a year of flawless function I now find that I cannot open mail messages by clicking track pad. I can highlight the messages and open them by pressing return, but can no longer double click to open the message. Only happens in mail; other programs and applications work fine. Any ideas out there?

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Mail-enabled Public Folders not accepting email from external users after migrating from Exchange 2003

We are in the process of trying to decommission our Exchange 2003 server, all of the replicas have been moved to the Exchange 2010 SP3 servers. However, each time we dismount the public folder store on the 2003 server (just to see what won't work) nobody
from outside the company can send mail to the mail-enabled public folders (we use these to communicate with vendors and customers).....they sit in the 2003 mail queue until I remount the store.
I have mail disabled them on the 2010 PF server, waited a few hours and then mail enabled them again. Same issue. Interesting to note is that when the PF store on the 2003 server is dismounted people inside
the company can still send to the mail-enabled PFs (which is good). I am stumped.
HDL

Hi,
There is similar issue in the below post.
https://social.technet.microsoft.com/Forums/exchange/en-US/20dc0f53-41c2-4275-a391-fd9b0907a7e1/after-move-all-replicas-to-exchange-2010-mail-enable-public-folder-stops-receiving-external-emails?forum=exchangesvrdeploylegacy

Mailbox Folders Not Showing Mail Correctly

Hello,
I am kind of baffled at what my mail is doing. Here is a screenshot of what my mailboxes look like. When I send a message it doesn't show up in the "sent" or "sent mesages folder", those only show select messages that were sent weeks ago. Also the trash only shows messages that were deleted weeks ago and not any I just deleted. It is like my mailbox is 3 weeks behind.
Also my inbox is deleting messages by itself!? I woke up this morning and 3 of the messages that were in my inbox that I received over the last couple days were gone? And finally, the drafts folder sometimes puts a sent message in it, but randomly and for no reason? It is like my mail program has a ghost. Any suggestions. I am really thinking of getting Eudora or somethign b/c I can't keep track of what I sent, if I need to fetch a deleted message, or even leave messages in my inbox without them being deleted.
http://seasonsofwhite.com/mail.jpg

Hey - thanks for the reply.
To hopefully add to this scenario, from the newest reply from the user, this started happening as soon as they upgraded to Office 2013, so any past folders that were created in their old Outlook (2007) were visible, it's only when they now create a new folder
from their new Outlook (2013), that the folder 'seems' like it isn't created, but when they check with another user that's still using Office/Outlook 2007, the new folder is there and usable.
We're still waiting on confirmation, but from what we've been told, the folders are visible/usable in the OWA as well. We're also checking with the 2nd user who was also upgraded to Office/Outlook 2013 to see if there's a visibility correlation issue,
as well as whether there's a reverse to this (i.e. someone with 2007 creates a folder and whether the 2013 user can see that one)
For the most part though, right now it seems only the one user with 2013 is having this issue, so begs whether it's a client issue, or maybe some setting on the Exchange side that's not translating to their Office/Outlook 2013.
Going to schedule a repair of Office 2013 and will update when we try that (as well as the other), but in the meantime, any other notes/ideas are appreciated.
Cheers

MobileMe top-level folders not accepting mail messages

Similar Messages

Maybe you are looking for