Mobility manager doesn't work when going over ICT

Mobility manager is working properly if a phone on the same call manager or a phone through the PSTN calls but does not work if the call goes over the SIP trunk.  We can make it work by checking the MTP required on the ICT but this results in video calls that do not work.
When I call a person across the ICT both devices ring, his desk and his mobile.  If he answers on his mobile, he gets dead air and his desk phone just sits there, does not get a red light as it normally does.  My call continues ringing and then after about 10 seconds goes to a fast busy, any thoughts on what I should check?

I am having the same problem, any help?

Similar Messages

  • Media Manager doesn't work

    I have a Blackberry 8330 (CDMA) v4.50.191 (Plaform 3.4.0.62).
    The Blackberry desktop manager is v4.5
    The Media Manager doesn't work.
    when I click on the icon for it, the window gets a grayish tint -- like it's going to do something -- but then it returns to normal and nothing happens.
    I am trying to download photos I took with my Blackberry camera to my computer.
    Can anyone tell me some recommendations on how to download them and/or repair the Media Manager?
    Thanks,
    Sharlene

    Hello,
    My advice, skip the Media Manager and instead use Mass Storage Mode:
    KB11879 What is mass storage mode
    With that, you can work with your BB memory area(s) as USB drives on your computer, and use your normal computer interface to do so.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    Imessage doesn't work when i connect to my wifi only works on mobile date how do i fix this?

    1. Did you use Bootcamp Assistant?
    2. Did you build a USB with Windows 7 ISO and Bootcamp drivers?
    3. You should use a USB2.0 disk, not a USB3.0 disk (flash drive).
    4. What year is the Retina MBP?

  • How do I delete items in my calendar when it doesn't work when I hover them over the trash can?

    How do I delete items in my calendar when it doesn't work when I hover them over the trash can?

    There are several ways
         - Selecting the event and hitting the "delete" key on your keyboard (as Wayne Contello said)
         - Selecting the event and opening the "edit" dropdown menubar item, and then selecting "delete"
         - Selecting the event and right clicking, then selecting "cut" (this option puts the event on your clipboard)

  • I had a problem my iphone 4 mouthpiece doesn't work when i am calling other mobile phone

    i had a problem my iphone 4 mouthpiece doesn't work, when i am calling other mobile phone they can't hear me but i can hear them. But when I am using the skype and viber to talk to other people they can hear me perfectly. and also when I record my voice it sounds good i can hear my voice.. i dont know what is wrong with my phone?

    I get trying to unlock it and it finally accepted the 4 digit PIN number on my SIM Card, which it wasnt accepting before (there is also a super PIN number, which i dont know whats for). And now it says "no service". I am reseting the phone and sometimes it just says "no service" and other times the SIM Card is locked again and it doesn't accept the PIN number anymore...

  • I cant login on any of my Apple ID  I know there correct but whenever it loads it doesn't work it goes back to sign in when I try it on my setting it is the same thing

    I cant login on any of my Apple ID  I know there correct but whenever it loads it doesn't work it goes back to sign in when I try it on my setting it is the same thing

    Hi go to itunes bottom of page delete Apple ID  then try & sign back in . Cheers Brian

  • Media Manager doesn't work anymore

    When I'm capturing and logging footage, Media Manager is part of my work flow. I capture the entire tape, then use the DV Start/Stop detect function to make subclips. Then I use Media Manager to create smaller versions of the subclips. I I log and archive the newly created compressed clips, and use them for edits.
    But now with FCP 5.0.2, Media Manager doesn't work like it used to. The end result of outputting the subclips is one large clip. If I output half of them at a clip (1,3,5,7,9,etc.) and then go back and do the rest (2,4,6,8,10,...) it works. But what a pain. I've tried every variation of settings. Nothing make a difference.
    What gives?
    Also, the subclips all now have the first frame of the next clip stuck on the end. That's not Media Manager, it happens before. But it is not cool.
    Anyone having similar problems, and any solutions?
    -Daniel Cohen

    Tom,
    Here is the process:
    Capture the entire DV tape as one long clip.
    Use DV Start/Stop detection to create markers. (This results in that extra last frame from the beginning of the next clip.)
    Make subclips from the markers.
    Select subclips and go to Media Manager
    Use Media Manager to Recompress
    -Recompress media using OfflineRT NTSC (Photo JPEG)
    -Delete unused media from selected clips.
    -No handles (I want the clip as it was on the tape)
    -Base media file names on clip names
    -Select a media destination
    And off it goes.
    Instead of creating individual clips (at the slected location) it makes one long clip, like the source just smaller because it is now compressed.
    In earlier version of FCP this worked. Something has changed in version 5.
    I can trick the Media Manager by selecting every other subclip, outputting, and then going back and selecting the rest. But that is twice the work. And I still have those darn extra frames at the end of the clips.
    Any ideas. (I have already done the Quicktime repair listed in many other threads.)
    -Daniel Cohen

  • I have different account ID's with my iphone and computer. I would like to standardise both to just the one. One of the ID's doesn't work, when I tried to list the second email with the preferred one a message telling me that this email is already in

    I have different account ID's with my iphone and computer.
    I would like to standardize both to just the one.
    One of the ID's doesn't work, when I tried to list this second email with the preferred one a message telling me that this email is already in use pops up.. yes it is, with me??
    Is there an easy to fix this please, Fabfitz

    If the email address you want to use is being used as the primary email address on a different ID you have to manage that ID and change it to a different primary email address.  This explains how: Change your Apple ID - Apple Support.
    If it is being used as an alternate or rescue address on a different ID, you manage the ID and either remove it or change it to a different email address.  This explains how: Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support.

  • [Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

    When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

    I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
    Photoshop cc 2014
    windows does not work
    mac does work
    Did you already post over here:
    [Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

  • Since the last update yesterday to firefox 4.0.1 my program "asus security protect manager" doesn't work properly. That means, that the saved keys from several websites not remembered for lock in.

    since the last update yesterday to firefox 4.0.1 my program “asus security protect manager” doesn’t work properly. That means, that the saved keys from several websites not remembered for lock in.

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • BitmapData draw method doesn't work when the project is published as the .swf file of the web applic

    Hi,
            I am totally confused by this strange error. When I tried using the draw method of BitmapData to draw a movieclip symbol of my project, it seems to work fine locally. However, as I uploaded the published .swf file to my web server and launched it as the plugin of my web application, it failed. The source codes as follows,
    function printscreenClicked():void
         //ExternalInterface.call calls a javascript function to print message1
        var bd:BitmapData = new BitmapData(stage.width,stage.height);
        //ExternalInterface.call calls a javascript function to print message2
      bd.draw(stage);
        //ExternalInterface.call calls a javascript function to print message3
    message3 didn't show at all. Instead, the browser console shows "Uncaught Error: Error calling method on NPObject.". My understanding of this error message is that the .swf is calling something crashing, and I believe that bd.draw(stage)is the crashng method call.
    Also, here is my html embed tag:
        <embed src="/tests/videoplayer.swf" id="flash" quality="high" height="510" width="990" scale="exactfit" name="squambido" align="middle" allowscriptaccess="always" allowfullscreen="true" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" style="margin: 0px auto;clear:both;position:relative;"/>
    Can someone help me?

    Thank you for your reply.
    I tried stageWidth and stageHeight, but it still doesn't work.
    The draw() methid is triggered when I clicked a screenshot button in my application as follows,
    ExternalInterface.addCallback("printscreenClicked", printscreenClicked);
    function printscreenClicked():void
         //ExternalInterface.call calls a javascript function to print message1
        var bd:BitmapData = new BitmapData(stage.width,stage.height);
        //ExternalInterface.call calls a javascript function to print message2
      bd.draw(stage);
        //ExternalInterface.call calls a javascript function to print message3
    Would you please give me an example of "waiting for Event.RESIZE is good, or just at least Event.ENTER_FRAME"?
    My real purpose in this application is to capture a snapshot of a streaming video. The video is contained in a movieclip object. I tried stage first since BirmapData.draw() doesn't work when drawing the movieclip on the web site. Do you have any suggestion for this situation? Also, is there any good method to find out what happened if the browser have "Uncaught Error: Error calling method on NPObject."?

  • I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing

    I have Adobe Acrobat 9.5.4 installed on my computer and it doesn't work when PDFing my document using Microft Word 2010. I have tried using the tab add-in, but it doesn't respond either. The only way to convert my document is to save it as a .pdf from the save as drop down box. I need to be able to have the full functionability of creating a PDF document with the tabs and links working.
    Please help!

    From OFFICE 2010 you either have to have AA X or just print to the Adobe PDF printer. You give no information on your operating system or specifically what you mean by PDFing -- there are multiple ways to create a PDF from a WORD document and you have given no information. However, in this case your only choice is to print to the Adobe PDF printer. Otherwise, you need to upgrade Acrobat.

  • TS1398 The internet on my Iphone 4 doesn't work when I use the Wifi

    The internet on my Iphone 4 doesn't work when I use the Wifi at home. My Mac works fine. On the Iphone it shows it's connected but it doesn't open any app. Anyone knows what to do? Thanks

    Ÿ. If you tap and hold the "Y" does it appear? If so, just slide your finger up to select.

  • It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

    It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
    Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

    This Apple Tech Note explains the process:
    http://support.apple.com/kb/ht1848
    It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

Maybe you are looking for