Mobo time of day clock
After 2 plus flawless years my mobo has developed its first issue. All of a sudden the time of day clock loses 20 minutes a day. Normally this would not be a big deal, but my banking software won't lock up with the server if the windows clock is more than an hour off. I've replaced the battrery, but that did not fix the issue. Am I missing something?
Quote from: syncman on 18-November-10, 01:08:27
I took a shot and invested $3 in another (2nd one) mobo battery. It fixed the "running slow" problem. Apparently the Energizer battery I replaced the OEM battery with was bad (low voltage) right out of the package. So much for the "Energizer bunny"!
Check date codes on replacement batteries. A few months back I went to a local retailer to purchase new coin cell batteries and they were all expiring in 2010. Bad. Went to another shop and got the same thing expiring in 2015.
Similar Messages
-
My time of day clock gains several minutes per day. It is set for automatic update but does so only when I bring up the preference. The computer is on nearly all the time so a dead battery doesn't seem likely. This topic was mentioned some time ago in this forum but I didn't see a final conclusion. Was this ever resolved?
This seems to be a recent phenomenon. I've made no recent system updates nor any other changes. It doesn't seem to do any harm but is an irritation.i would think it would be hardware-related as well. i would try a couple more things. i would boot to open firmware holding apple-option-o-f and then type in the following commands--
reset-nvram (hit return)
set-defaults (hit return)
reset-all (hit return)
the last command restarts the computer. i would also try a pmu reset to see if it helps. i'm not sure, but you seem to have a flat panel imac. if so, instructions for the reset are here. http://docs.info.apple.com/article.html?artnum=95165. this is, of course, if you feel comfortable going inside the computer. it is not that big of a deal. just make sure if you do this you ground yourself by touching metal and letting go of it before removing power cord and before touching the logic board. i am thinking maybe this could be the system clock, not the one viewed on the computer, but the crystal (or one of them, if there is more than one) on the logic board regulating frequency like a crystal in a watch would. i'm using the pc term. i'm assuming it's the same or pretty similar on a mac. [ 8 ) ] -
Doing something at a specific time of day
Hi all,
Basically what I am doing is an alarm clock, to wake me up to some MP3s. It all works fine.
My only concern is the following:
private Thread tTimeCheck = new Thread() {
public void run () {
while (true) {
cal = new GregorianCalendar();
int hour24 = cal.get(Calendar.HOUR_OF_DAY);
int min = cal.get(Calendar.MINUTE);
if (hour24 == JSelectHour.getValeur() && min == JSelectMinute.getValeur()) {
playMusic = true;
} else {
playMusic = false;
try {
t.sleep(1000);
} catch (InterruptedException e) {
};Is it unefficient to check every second, to see if the time of day is equal to the set time on the alarm clock? It seems to me that there has to be a better way to do this.Thank you for your reply.
This is my thread that plays the music.
while (true) {
if (playMusic && jpnl.getAlarmStatus() == 1) {
testPlay("C:/Documents and Settings/Seb/Desktop/Music/01-nirvana-smells.like.teen.spirit.mp3"); //hardcoded for now
}testPlay is executed the the entire song plays before the next iteration.
Next step: I'll look to put this in the taskbar (windows tray / whatever it's called), never done that before =)
Thanks,
Message was edited by:
Robocrotch -
New to FiOS - Set Top Box isn't showing time of day
I just had FiOS installed on multiple TV's HD and non-HD. All the set-top boxes don't show a time of day except the HD DVR. Is there a way to set the others up to show the time of day? If so, how?
The new HD STB's do no have a display at all. cannot get a clock on the QIP7100-2 STB's
====================================================================================
Error exists between keyboard and chair. -
DVR STB will not hold the display of the time of day.
I am new to FIOS. I have a DVR Set Top Box for my HD TV. I prefer to see the time of day displayed. I set this option in Menu/Settings/Set Top/Display and it works OK UNTIL you change the channel. Then it displays the new channel and DOES NOT revert back to the time of day as it is supposed to do.
Called Verizon. They reset the box. It worked OK for about 30 minutes then went back to the same problem. I don't want them to reset it again because when they did it wiped all of my favorites.
Any solutions will be greatly appreciated.
Solved!
Go to Solution.Try rebooting the STB and then change the clock setting and change it back. That worked for me when i had this issue. I have seen this reported a couple of times and most of the time if this fix didnt work, the issue resolved itself within a couple of days.
Also, it should be noted that with the 1.7IMG release they changed the way the front display functioned. It now changes to show the channel number at every program change and then reverts back to showing the clock after about 2 minutes.
"If your problem has been solved, please mark it as such. Don't forget to hand out your Kudos!" -
Can I set multiple iCal alarms to play iTunes 4 times a day?
I would like it to play an iTune at 4 different times during the day (upon my AM Kdg class' arrival/cleanup time and again upon the PM Kdg class' arrival/cleanup time, for instance).
Is this possible or am I stuck with only 1 alarm capability?
(I don't want to buy a cd alarm clock - that's just another thing to plug into the wall. I want my iMac to work FOR ME!)Hi,
I've been browsing the discussion forum and you seem quite knowledgeable.
Regarding the question about triggering event alarms several times a day
do you know if there's any way to modify the "repeat" menu to repeat tasks hourly (rather than typing in a specific time). I have a bunch of scripts I'd like to execute every hour, four hours a day, for a month. I'm using ical to control a sound installation in an art show.
Thanks for your help.
Francesco -
Many times a day i have to disconnect the wifi then reconnect
for some obscure reason, when working, the wifi just stops...
it shows that it's connected in the bar besides the clock. but it just dont work.
the only solution is to deconnect then reconnect...
i look, read and took part in a couple of discussions in this forum, but there is no answer to the problem and people are getting more and more angry.
i dont have time for flaming, i need to get this problem fixed, (allready talked to apple a couple of time about this they did the repair permission trick didnt work)
there is some sort of conflict between SKYPE, TIMEMACHINE, ITunes and or any Adobe product. Could it be some sort of PORT problem?
Apple you need to fix this, please
y.d.I suffered with this problem for two years, I replaced my airport exteme with a time capsule, and it improved, but still cut out one or two times a day. Last week I changed my internet provider (DSL to fiberoptic) and so far so good. So I'm not sure it ever was an airport problem REALLY. but perhaps this is different.
-
About +ive Time Mgmt with Clock Time .
Hi SAP-HR Experts .
Plz give me idea about +ive Time Mgmt with Clock Time.
I maintained , Infotype 50 , (created from 01.04.2007)
When i tried to maintained Infotype 2011 . (from 01.04.2007) record is not created , it gives
warning (date is with in selection period) when i press Enter Key over it , No record is created in infotype 2011 .
I sat feature TMSTA = 1 .
In infotype 7 , i maintained Time Mgmt status = 1 .
I want to know what Time Evaluation Report (RPTIME00) will give to me ?
How do i confirm my self that now SAP-HR is running on +ive Time Mgmt with Clock Time.?
Please guide me ...
Regards : Rajneesh (9873607039)
Edited by: Rajneesh Kumar on Nov 18, 2008 6:02 AMHi Rajneesh,
When you run time evaluation through PT60 schema TM00 you will get the following:
1. Clock in and Clock out entry
All recorded time data documenting the actual attendance times or the actual absence times of employees.
Actual time has the opposite meaning of planned working time.
Example:
According to the work schedule, an employee is supposed to work from 8:00 a.m. to 5:00 p.m. on December 3, 1999 (planned working time). The actual time data (actual times) from this day is shown below:
8:00 a.m. to 2:30 p.m. Attendance
2:00 p.m. to 5:00 p.m. Absence - doctor's appointment
2. SKELETON TIME
skeleton time is a time account in which payment-related times of an employee are managed.
Skeleton time is determined in time evaluation.
Example:
Skeleton time in the standard SAP System consists of:
u2022 Attendance, absence, and off-site work within a contractual period (start and end of working time)
u2022 Overtime hours that exceed approved overtime
u2022 Paid break times
3. FLEXTIME
Working time pattern in which employees can individually determine their own start and end times, as long as a certain number of hours is worked within a defined period of time each day.
*4. FILL TIME
A specific period of working time described in time evaluation that lies within the contractual start and end of working time (excluding breaks).
If an employee works a flextime schedule and is also expected to be at work at certain times (core times), then fill time indicates the difference between the start and end of working time (without breaks) and the core times
5. PRODUCTIVE TIME
The usable working time for a resource. The system determines the productive time using the working time data and utilization rate for the resource as follows:
Productive time = (End of working time - start of working time - break
duration) x Rate of utilization / 100%.
You estimate the downtime at the resource using the utilization rate.
And the results of the following will depend on your settings...
Time evaluation will update the quotas and it will form time balances
I hope this information is enough to understand...for more clarifications revert to me..
Regards,
KPJ -
Any IDEA of Getting Server Time & RUn JavaScript Clock
Hi ,
Any idea of getting Server Time & running javascript Clock
I tried using ..
var tDate=<%=new java.util.Date()%>;
But it is not working
Plz helpYou can create a date in javascript like this
new Date(year, month, day, hours, minutes, seconds, milliseconds) You don't have to supply all the parameters (this is javascript after all)
Getting it from java, into javascript...
<%
java.util.SimpleDateFormat sdf = new java.util.SimpleDateFormat("yyyy,MM,dd,HH,mm,ss,SS");
Date now = new Date();
String sNow = sdf.format(now);
%>
var tDate = new Date(<%=sNow %>) -
N8 restarts randomly, 1-2 times a day?
I have been using an N8 for a couple of months. had a few small issues but all resolved. Now, the only problem remaining (and I have seen it since i had the phone) I notice that once or twice a day it suddenly goes through a power-off/power-on cycle. I have seen it happen with the phone sitting on the desk next to me - not being touched. Other times i come back to the phone and I can see because it displays "new messages" although only the old unread messages are there in the inbox, I know it has gone through a cycle. Once or twice it has done it as I was trying to use the phone. Last week, for another issue Orange sent me an "update" to the sim-card. My N8 software/firmware is up-to-date, and a few days ago I even tried a "soft reset" ie i entered *#7780# But the behaviour still persists. It is not hugely inconvenient, but it should not be happening. Anyone any ideas? is this a widely seen problem? I want to check here first......but i will go back to Orange and see what they say. Maybe it is a faulty handset.
When I first got my N8 in early November I used the sim card from my E71 (which had a bad reboot problem I believe due to issues with the AT&T network). At first it appeared okay but then would reboot 1-4 times a day and was driving me nuts. After posting on forums and searching others the one recommendation was to get a new sim card. I got a new sim card and "most" of my reboot problems went away. I said "most" because here is the odd thing. I always liked the Music Player screen saver for a number of reasons and that was what I used. I cannot remember why I did this but when I switched to the Big Clock screen saver my phone hardly ever reboots - maybe once every couple of weeks (still not solved but a lot better). If I change back to the Music Player screen saver, it will reboot within half-a-day to 2 days max. I do not know if I have a memory/hardware problem or what is going on. Not sure if any of this is relevant to your situation, just thought I would pass along my experience.
-
TV shuts off several times a day
My livingroom TV (supposedly with a HD STB) just goes black and into "standby mode" several times every day. I've reset the modem/router and even unplugged/rebooted the box but the problem reoccurs within 10 seconds or 10 minutes or 30 minutes. This is really aggregating!!!! My bedroom TV with a STD is unaffected as are both of my computers. Going to the "troubleshooting site" on Verizon has been no help as my STD looks nothing like those pictured and has no clock ( my STD box does!!!!!) The Verizon site is useless!!!!!!! Can someone please help me?
The first question I would ask is, when you say "standby mode", are you describing a black screen with the Verizon logo and a message "Press Menu to watch FiOS TV..."? If yes, then keep reading. If no and the screen just goes black and stays that way then you might be having an issue with your TV and not with FiOS.
Could not find a good reason why a functional STB would enter standby mode several times per day at seemingly random intervals. From what I could find, there are three reasons an STB would enter standby mode:
The STB has been powered down using the power button.
The STB is left tuned to a channel that you are not subscribed to.
The STB has an HDMI connection to the TV and has sensed that the TV is off.
These describe the box going into standby mode without resetting/rebooting. If you are seeing a red screen when you turn the STB on, it has lost power and been reset. This could happen because of:
a power outage
an update
an internal error reset
an overheating/ventilation issue
I would:
perform an STB Auto Correct
reseat all your cable connections
contact Verizon about a possible replacement
Let me know if you need help doing these.
FYI - your STB is a model 7100-P2. It's the only one without a clock. You can click here for more info.
Find this post helpful, informative or just something you agree with? Click the red ‘thumbs-up’ button.
Did this post solve your problem? Click the green ‘Accept as Solution’ button. -
How many mails i can send at a time per day using APEX mail system?
HI,
I am working on application, when i have written a process to send mail, i have a project where i have to send mail at a time for all the email id's
given list there are upto 5000 email id's where text body also include certain set of data from a report. thinking at a time 3000 its difficult i divided
it region wise, but still each region have 2000 odd email id's. during testing when i run the process just 950 mails i could send then i got a error
saying "ORA-20001: You have exceeded the maximum number of email messages per workspace. Please contact your administrator." so please
can any one help me to know How many mails i can send at a time per day using APEX mail system?
Thanks in advance
GowthamiHi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM -
Hard lock ups multiple times a day - How can I troubleshoot?
My machine locks up hard multiple times a day. If I happen to be sitting in front of it, I observe that the image on the monitors stops changing. Mouse and keyboard will not work at all (including Magic key SysRq sequences). I cannot ping the box from another machine. The system has not made it to 24 hours of uptime for some weeks.
I am beginning to suspect that this may be an issue with the NVIDIA driver, but that's only a guess since it's the only thing I've seen before that can lock up a machine hard like this. I have checked journalctl and the Xorg logs, but don't see anything telling.
What should be my next steps toward solving this issue?When it locks up, do any indicators on the keyboard blink? That would be an indication of a kernel panic.
If there are no blinking lights, does it unlock eventually?
Has the machine ever been stable?
Have you tried installing a RAM test in your boot loader and running it?
Next, I would start blacklisting any kernel module you don't absolutely need to see if you can isolate it that way.
Also, this looks ominous:
Apr 29 07:49:48 lore kernel: This system BIOS has enabled interrupt remapping
on a chipset that contains an erratum making that
feature unstable. To maintain system stability
interrupt remapping is being disabled. Please
contact your BIOS vendor for an update
I redouble my suggestion you pare down loaded modules to try and isolate this.
Also, I see that it looks at the microcode
Apr 29 07:49:48 lore kernel: microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
Apr 29 07:49:48 lore kernel: microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
But I don't see it being updated. That might be normal for your processor, but double check that and ensure you have the microcode update stuff installed in the boot loader correctly. -
IPhone 4S battery draining too fast...Need to charge 3 times a day
Finally after 4 years I was very excited to get an iPhone that has all the features I wanted…but I am disappointed so far.
I purchased an iPhone 4S 32GB on 10/7 and has not been impressed with the battery life. I have to charge my iPhone at least 3 times a day. I go to work at 8 AM and by 11:30 AM the battery is at 20 %, so I charge it again which takes only about 60 to 120 minutes to charge, and by 5:30 PM I have to start charging again…the third charge has start around 11:30 PM and I have to keep the phone plugged overnight otherwise it will be dead by 6 AM.
I have read other posts on the web and people have suggested turning notifications, location services…etc which I went ahead and did but that did not change the battery issue. What is the purpose of having the iPhone 4S if all the features have to be turned off.
I always try to kill apps that running in background but still no fix to battery issue.
on 10/19/11 I went to Apple store and exchanged the phone with new one. The apple rep activated the phone for me and the charge was at 78 %. I left the store and 10 minutes later I was at my house, but again I was surprised to see the battery has drooped to 65 % within 10 minutes. While I was driving home I did not touch the phone or make/receive calls.
When I got home I plugged the phone and when it was charge at 100 % I unplugged it and 40 minutes later the battery dropped to 70 %.
Today I unplugged my iPhone 4s at 8:20 this morning with 100% and by 10:43 AM I am down to 63%. By 11:13 AM the battery was at 54% and by 11:46 AM the battery was down to 44% with me not touching it. I have turned everything off such notifications, locations services...etc and nothing in the background is working and I only used it for a 10 minute conversation.
It seemed that a lot of users are have similar issue. Not sure if the issue related to iOS 5, iPhone or bad batch of iPhone or iPhone batteries.
Before getting the iPhone 4S i had a 3GS from a family member that i had to charge at least 3 times a day. The only reason I got the new 4S is to not have to deal with frequent charge. I think I am 90 % close to returning the phone back to Apple and wait few months before attempting to purchase another phone.
Thanks.....BWhat made the trick for me was to drain the phone completely - until it dies. (It took quite a while to go from 3% to 0...). Then, charge it overnight.
Previous days I would start charging it with the battery at 10-15%, on red. Also for the last week I've been trying disabling functions, with the hope of finding what was the "offending" piece but without much success. Still was loosing about 10% per hour, just by using it to check emails, maps, and sometimes a call.
Today is almost two hours since I left home, with everything turned on again, used mail, maps with traffic during the ride to work, some browsing - using it "normally" - and the battery is still at 95%.
That looks more like normal to me.!!
Might try to drain it to 0% again as many other suggested, but if it is a battery charger "calibration", it shouldn't be necesary to do it more than once. -
Just installed Mavericks and my computer crashes 4-5 times a day now.
Hi. Just a few days ago I finally gave in and upgraded to Mavericks (10.9.5) from 10.6.8 as there was some software that I needed to use that necessitated the upgrade. Since I've upgraded, my MacBook Pro crashes at least 4-5 times daily. I am not doing anything unusual when it occurs. Usually typing an email, or switching between tabs in Safari or clicking save on a word file. In another post I was introduced to an app called Etrecheck which seemed to me to be a fine way to show all the Mac geniuses on this forum whats going with my computer (unfortunately I am not savvy enough to look through it and understand what's going on). I've posted the report below. Maybe someone can help me figure out what's causing my computer to crash?
The next time it happens I can also copy the report that shows up after the crash and post it as well. Many thanks in advance.
Problem description:
Since I downloaded Mavericks (10.9.5) my computer crashes randomly 4-5 times per day.
EtreCheck version: 2.0.4 (89)
Report generated October 15, 2014 at 8:07:20 AM EDT
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1680 x 1050
NVIDIA GeForce GT 330M - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 9:9:52
Disk Information: ℹ️
ST9500420ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (75.82 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 6 Titanium.app
[not loaded] com.roxio.TDIXController (1.2) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
[not loaded] com.IKMultimedia.driver.StompIO1 (1.0.0) Support
[not loaded] com.digidesign.fwfamily.driver (8.0.5f2) Support
[loaded] com.digidesign.iokit.DigiDal (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.boot.driver (8.0.5f2) Support
[not loaded] com.digidesign.mbox2.driver (8.0.5f2) Support
[not loaded] com.digidesign.usb.elevenrack.driver (1.0.1) Support
[not loaded] com.frontierdesign.iokit.alphatrack (1.4.1f1) Support
[not loaded] com.ikmultimedia.driver.StealthPedal (1.0.0) Support
[not loaded] com.paceap.kext.pacesupport.master (5.9 - SDK 10.6) Support
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9 - SDK 10.4) Support
[not loaded] com.paceap.kext.pacesupport.panther (5.9 - SDK 10.-1) Support
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9 - SDK 10.6) Support
[not loaded] com.paceap.kext.pacesupport.tiger (5.9 - SDK 10.4) Support
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Qmaster: Path: /Library/StartupItems/Qmaster
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] com.amazon.sendtokindle.launcher.plist Support
[running] com.eastwest.server.plist Support
[running] com.frontierdesign.alphatrack.daemon.plist Support
[running] com.sony.PMBPortable.AutoRun.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[running] com.digidesign.elevenrack.helper.plist Support
[running] com.digidesign.fwfamily.helper.plist Support
[running] com.paceap.eden.licensed.plist Support
[loaded] PACESupport.plist Support
User Launch Agents: ℹ️
[invalid?] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
TomTomHOMERunner ApplicationHidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Internet Plug-ins: ℹ️
WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.2.0 Support
OfficeLiveBrowserPlugin: Version: 12.3.6 Support
iLokClientHelper: Version: 3.4 Support
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 Support
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3
JackRouter: Version: JackRouter Support
Digidesign CoreAudio: Version: 8.0.5 Support
3rd Party Preference Panes: ℹ️
Citrix Online Plug-in Support
Digidesign Eleven Rack Support
DigidesignMbox2 Support
Digidesign Mbox 2 Pro Support
Flash Player Support
Perian Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
10% com.apple.WebKit.Networking
7% fontd
2% com.apple.WebKit.Plugin.64
1% WindowServer
0% configd
Top Processes by Memory: ℹ️
172 MB com.apple.WebKit.WebContent
125 MB WindowServer
112 MB softwareupdated
86 MB Safari
82 MB Mail
Virtual Memory Information: ℹ️
25 MB Free RAM
1.46 GB Active RAM
1.45 GB Inactive RAM
856 MB Wired RAM
2.11 GB Page-ins
414 MB Page-outsSure enough the computer just crashed a few minutes after posting. Here's the report after the computer rebooted:
Anonymous UUID: 40656744-595E-FDB7-F6E9-0497F4D35619
Wed Oct 15 08:27:05 2014
panic(cpu 0 caller 0xffffff7f9fa95f7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80c5ad5000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80b3abaf80 : 0xffffff801d622f79
0xffffff80b3abb000 : 0xffffff7f9fa95f7c
0xffffff80b3abb0d0 : 0xffffff7f9e11bf1b
0xffffff80b3abb190 : 0xffffff7f9e1e550a
0xffffff80b3abb1d0 : 0xffffff7f9e1e557a
0xffffff80b3abb240 : 0xffffff7f9e464056
0xffffff80b3abb370 : 0xffffff7f9e208ba9
0xffffff80b3abb390 : 0xffffff7f9e12296d
0xffffff80b3abb440 : 0xffffff7f9e120478
0xffffff80b3abb640 : 0xffffff7f9e121dc7
0xffffff80b3abb710 : 0xffffff7f9f086e1d
0xffffff80b3abb890 : 0xffffff7f9f086823
0xffffff80b3abb8a0 : 0xffffff7f9f04baf0
0xffffff80b3abb8b0 : 0xffffff7f9f04bb65
0xffffff80b3abb8c0 : 0xffffff7f9f037c51
0xffffff80b3abb8e0 : 0xffffff7f9f036fd9
0xffffff80b3abba60 : 0xffffff7f9f066940
0xffffff80b3abbb20 : 0xffffff7f9f035ad9
0xffffff80b3abbb70 : 0xffffff801dacf146
0xffffff80b3abbb90 : 0xffffff801dad0741
0xffffff80b3abbbf0 : 0xffffff801dace1af
0xffffff80b3abbd40 : 0xffffff801d6b6998
0xffffff80b3abbe50 : 0xffffff801d626bc1
0xffffff80b3abbe80 : 0xffffff801d6139c5
0xffffff80b3abbef0 : 0xffffff801d61e013
0xffffff80b3abbf70 : 0xffffff801d6c9b9d
0xffffff80b3abbfb0 : 0xffffff801d6f4196
Kernel Extensions in backtrace:
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000->0xffffff7f9e334fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f9e33f000->0xffffff7f9e5e8fff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f9 f024000->0xffffff7f9f0eefff
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f9e0bc000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f9e0cc000
com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f9fa87000->0xffffff7f9fa9afff
dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f9fa7f000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9df7f000
dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f9dcbf000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f9e079000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f9fa82000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x000000001d400000
Kernel text base: 0xffffff801d600000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8076473822747
last loaded kext at 654256352755: com.apple.filesystems.smbfs 2.0.3 (addr 0xffffff7f9fb9f000, size 335872)
last unloaded kext at 334416608476: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9e8bd000, size 65536)
loaded kexts:
com.paceap.kext.pacesupport.snowleopard 5.9
com.Cycling74.driver.Soundflower 1.5.1
com.digidesign.iokit.DigiDal 8.0.5f2
com.apple.filesystems.smbfs 2.0.3
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AGPM 100.14.34
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleIntelHDGraphics 8.2.4
com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Maybe you are looking for
-
Jabber 9.1.2 missing DLL's with Win8 64bit and WebEx Connect
I realize that Windows 8 is not yet listed as supported operating system for Cisco Jabber for Windows, but I would like to make it work anyway I am trying to use Cisco Jabber for Windows 9.1.2 on Windows 8 with WebEx Connect. I am able to log in and
-
Iphone is only recognized in restore mode
What would make iTunes for windows 7 recognize iPhone in recovery mode, but not to proceeded with restore, stopping on the "snow cane". Completely not recognize restored iPhone, not even by windows auto play. iTunes diagnostics runs with everything
-
Re: Hibernate Dialect error against Firebird 2.1.2 DB via JDBC
ColdFusion9 ColdFusionBuilder1 on XP Pro Ok, now I'm completely stuck. After 2 days of configuring CFB9 (and it's Administrator) I was able to, in CFB connect to a Firebird DB in design time using JDBC instead of ODBC. However, when I try to Run th
-
How do you get PSE12 to stop opening the keyword menu at the top of the screen
How do you get PSE12 to stop opening the keyword menu at the top of the screen when you want to isolate tagged photos????????????? it takes up 1/4 of the screen. This is so stupid. PSE10 had it done right, just a click box and boom all the photos tag
-
Image distortion when exporting
Hi all, I'm experiencing off and on problems when exporting RAW images from LR 3.3 to JPG. (on MacBook Pro Snow leopard 10.6.6) I am using Camera Raw 6.3. Original RAW images taken with Canon 550D. This is what happens: Original