Mocha error, what am i missing?
Hi guys,
Thanks for looking in. I am trying to track a peice of footage using Mocha. I keep getting an error. The scene is a building pics below. I am trying to track that area with the mask. My footage starts on the area of mask (where the fire is going) Bystander watching. camera pans off that as somone comes around building to the Left. (you don't see that here) However it seems that once the track gets to the end of the mask, 'she spits the bit'.
When it gets to the end of my Out point see pic 3 or 4
That is where the camera pans completely off that area and it is as though Mocha cannot calibrate or find itself. I marked an in and out. via * in AE and in Mocha's TL using In and Out. Yet keeps kicking it.. I am trying to line it up on a plane real well. I have watched a few lessons on this too. The latest from Dr Mathias over on Mamoworld. A real good webinar however I am not getting to a point to copy and Null. See Pic 3 for Error and note how my mask is pitching abit on a shear... Thanks for any suggy's.
Al'right Boys.... I got it! The mask is VERY, sensative. I lowered it to the bottom plane and it stuck this time. I used the lower line and created a smaller Mask. In lou of the error telling me to use a bigger area....?
That is why you guys could not answer right away as usual. It was right my mask was not tight on a plane. Thanks just the same.
Similar Messages
-
I am trying to download elements 5.0 onto my laptop that has windows seven. I get the message error 1335'data1.cab' missing. What can I do to get this to instal?
It looks like the CD is damaged. You could try copying the entire CD on to your hard disk in a temporary folder and then launch the setup.exe file by double clicking on it.
Can you do this? Please post back.
Whether 5 can run in Windows 7 is something I don't know. You just have to try it. -
Transport error - what is missing ??
Hi, I ma getting RC = 8 & the following error while tryign to transport from BWDev to BW Q system.
1 : Source system DV5CLNTXX does not exists
is it : before transporting the BW side ,does the link need to be doen in the R/3 side
to show :
R/3 Dev -> R/3 Q
2: assignment of info object Zx1 have not yet been maintained -> Long Text.
What am i missing in the Transports ???Hi
well yes you have to create or transport your source system in your BWQ beofre transport objects depending on a source system.
In your BWQ you also have to tell how objects shall relate:
if a BWD obj is linked to an R3D
==>
the BWQ obj should be linked to the R3Q
you have to perform this activity in your BWQ / AWB / tranport connection / Conversion.
hope this helps,
regards,
Olivier. -
Updating to latest version of i tunes but stopped by this error message MSVCR80.dll missing, what can i do?
This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation. -
I'm trying to download the new version of itunes. durig the install i get a message that I need to verify that I have sufficient privilege. Then I get a message of a Windows error 126 and a missing file MSVCR 80.dll. I've tried everything on the support site and nothing works.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Crystal Report: ERROR - Some parameters are missing values
mine report it possesses a single parameter ....
this is the example of like tries of to change the value set up in the report...
ERROR: Some parameters are missing values
thanks help...
EXAMPLE:
<%@ page import="com.crystaldecisions.report.web.viewer.*"%>
<%@ page import="com.crystaldecisions.report.htmlrender.*"%>
<%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.common.keycode.*"%>
<%@ page import="java.util.*"%>
<%
try {
IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
String report = "report/ReportParametro1.rpt";
IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
request.getLocale());
Fields fields = new Fields();
ParameterField pfield1 = new ParameterField();
Values vals1 = new Values();
ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
pfield1.setName("CICCIA");
pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
pfieldDV1.setDescription("Query Dinamica....");
vals1.add(pfieldDV1);
pfield1.setCurrentValues(vals1);
fields.add(pfield1);
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setReportSource(reportSource);
// layout
viewer.setOwnPage(true);
viewer.setBestFitPage(true);
viewer.setHasLogo(false);
viewer.setHasRefreshButton(true);
// group navigation
viewer.setHasToggleGroupTreeButton(false);
viewer.setDisplayGroupTree(false);
// page navigation:
viewer.setHasGotoPageButton(false);
// print/export
viewer.setHasExportButton(true);
//viewer.setPrintMode(CrPrintMode.PDF);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setIgnoreViewStateOnLoad(true);
viewer.setParameterFields(fields);
viewer.setEnableParameterPrompt(false);
viewer.refresh();
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
out);
viewer.dispose();
}catch(Exception e){
out.println("Errore " + e.getMessage());
%>
I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
Also, what needs to be done for displaying export option of EXCEL?
Thanks,
Farzal -
How to tell what fonts are missing in a Photosohp CS5 document?
Hello! I have received some work from a graphic designer. I need to modify some of the text in the document. When I open the document I get an error message:
Some text layers might need to be updated before they can be used for vector based output. Do you want to update these layers now? [Update] [No]
If I click [Update] it replaces the font with Myriad Pro. If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text. If I try to edit the text I get another warning:
Editing or rendering the text layer "Text Layer" will cause its layout to change. Continue? [Cancel] [OK]
The same behavior described above occurs. If I click [Cancel] I obviously can't edit the text. If I click [OK] it changes the font to Myriad Pro.
I would like to determine what font the layer is using. I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document. I can't use the text tool to select the text without it changing the font. Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font. I do not have that. I only have perhaps 200 fonts installed. Can anyone tell me how to determine what fonts a .PSD document is using? I would prefer not to bug the graphic designer if possible. Thanks much!
~ DanNot sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences -
When I go to upgrade my itunes software I get a message that I do not have enough space. My hard drive has 120 gb free and the files are only 42 mb. What am I missing?
You Hard Drive might be framented or have bad sectors. Use Windows utility to deframent the drive and Scan Disk for file allocation errors or bad sectors.
-
What causes the Missing or invalid version of SQL library PSORA (200,0)?
What causes the Missing or invalid version of SQL library PSORA (200,0) in PeopleTools 8.51 Application Designer?
Could be several things. Bad path, bad version, etc. give us details on your client install. What Oracle client do you have installed. App Designer is 32 bit. If you installed the 64 bit client you might get this error. What OS are you using. PeopleTools version? guessing 8.51 from your other post.
-
Trying to download iOS7 and it is saying i have a setting error what does that mean
trying to download iOS7 and it is saying i have a setting error what does that mean
Quite probably, or it may just be off and out of range of a network. In order to find a missing iOS device it has to have had the app enabled, and be on, not wiped, and able to connect to a network.
-
Error: Prefix number: entry missing for system REP client 113 Msg no 5W023
Hi, we're trying to study Workflow based on the manuals we downloaded online. Upon saving, we encountered the error: Error: Prefix number: entry missing for system REP client 113 Msg no 5W023.
Here's the diagnosis:
Diagnosis
Tasks, rules, and workflow definitions require an ID that is unique throughout all systems and clients. In this way, you can ensure that you can transport these objects from one system into another at any time (without restrictions). From a technical point of view, the uniqueness of the ID is ensured by what is known as a "prefix number". You can define a separate prefix number for every system and every client in table T78NR.
System Response
If a prefix number is not defined in the client in which you are currently working, it is not possible to maintain (maintenance terminates).
Procedure
Maintain table T78NR in Customizing, and create an entry for the system in question and the current client.
Hope somebody can help me understand what this is.. thanks so much and appreciate your help..
Thanks,
Angela PaulaHi Angela,
Please check if the Prefix number is maintained in SWU3 t-code.
Go to Maintain Definition Environment -> Maintain Prefix Numbers and check if the prefix number is maintained.
Hope this helps!
Regards,
Saumya -
None of the 3D options are active in my menu. What am I missing?
I have the up-to-date Creative Cloud version of Photoshop, but none of the 3D options are active in the menu. What am I missing?
I tried clicking the "Get More Content" but didn't find anything which would apply to the basic 3D functions in the menu.
Thank you for any light you can shed on this.Common Photoshop Issues | Mylenium's Error Code Database
Mylenium -
What am I missing? (overheating, fans, tpfancontrol)
Situation:
I have three T60 laptops. I will henceforth refer to these at T60-A, T60-B, and T60-C
T60-A is a 14" version, and is working fine.
T60-B is a 15" version who's hard drive died. I'm trying to install a new hard drive. This computer works fine with the hard drive from T-60-A, but overheats and shuts down. This is the one I want to fix. This is the one I'll mostly focus on.
T60-C is a parts computer with suspected bad motherboard. It is also a 15" model and has been taken apart as of yesterday, fan extracted.
T60-B overheating symptoms:
She runs warm (by feel directly under the fan on battery (from T60-A) power. She runs HOT with power supply (also from T60-A) plugged in, and shuts down after a time. No fancy graphics programs running. Just Google Chrome.
I can hear the fan running, and feel hot exhaust coming out. In looking at the intake and exhaust, I seen no visible dirt/dust/spilled drinks that would block the ports. My initial plan was to replace fan with that from T60-C, but at this point, I'm not sure that's the problem, and might do more harm than good. I'm not adverse to performing this opweration though. Fan is loud, but not the sort of 'fan going bad' loud. It's seemingly just working really hard.
Any suggestions on starting points?
TPFancontrol problems:
I figured this would be a helpful diagnostic tool.
I downloaded the program, extracted the files (using T60-A again, being the only reliable computer). But I can't for the life of me figure out how to install the program. I found the .exe, but get error. winio.sys is missing in app folder or failed to load.
Any thoughts or recommendations on a different download that might work?
Sorry if these are the most basic of questions. I did search here and forums.thinkpads, and I'm still stuck.
Solved!
Go to Solution.Hi.
What are the 7-digit type/model numbers from the back of each laptop? This will aid further discussion and the referencing of part numbers.
If the fan in "T60-B" is making any abnormal noise it means it may not be giving optimal performance. It could probably still use a fresh cleaning and lubrication even if you don't see any obvious buildup of dust or particles. In addition, the thermal paste (a.k.a. thermal compound) between the heatsink and CPU may need to be refreshed. The thermal compound aids in heat dissipation. Use a good quality product such as Arctic Silver 5, which always works great for me.
Have a great day. (I do not work for Lenovo) -
Error message ORA-0097 missing right parenthesis
Dear all;
Please what is wrong with this particular code because I keep getting the error message ORA-0097: missing right parenthesis
pl/sql: sql statement ignored. Thank you
spectification of package
create or replace package NEW_INFORMATION is
function get_total return number;
procedure daily_tasks;
function display_type_id return varchar2;
end NEW_INFORMATION ;body of package
create or replace package body NEW_INFORMATION is
function get_total return number is
oput number(10);
begin
select count(unique (p1.p_id)) into oput
from table_one p1 where p1.p_id in
('CYY','AIR, '');
return oput;
end;
function display_type_id return varchar2 is
used_cells varchar2(30);
begin
select unique(p1.p_id) as cells into used_cells
from part p1 where p1.pl_id in
('CYY','AIR', '');
return used_cells;
end;
procedure daily_tasks is
name_id varchar2(20);
temp_num number(6,2);
production_daystotal number(6,2);
result_first_cc_A number (7,2);
begin
name_id := display_type_id (); -- used to call the function
temp_num := get_total(); --used to call the function
select name_id, trunc(first_partcal_A.initial_cc_A / temp_num over()) +
case
when mod(first_partcal_A.initial_cc_A,temp_num over()) >= row_number() over(order by name_id) then 1
else 0
end
from
select round(total_as.t_as/prodmonths.proddaysinmonth) as inital_cc_A
from
(select count(*) as t_as from table_one p1 where p1.a_code = 'A') total_as,
(select count(*) as proddaysinmonth from
(select mon_dt + level - 1 as dt, to_char(mon_dt + level - 1, 'DY', 'NLS_DATE_LANGUAGE = ENGLISH') as dy_days from
((select trunc(to_date(m || '/' || a, 'MM/YYYY'), 'MM') as mon_dt
from
(select to_char(sysdate, 'MM') as m,
to_char(sysdate, 'YYYY') as a from dual)))
connect by mon_dt + level - 1 <= last_day(mon_dt))
where dy_days in ('MON', 'TUE', 'WED', 'THU'))prodmonths) first_partcal_A;
order by name_id;
end daily_tasks;
end NEW_INFORMATIONPls try this
CREATE OR REPLACE PACKAGE BODY new_information
IS
FUNCTION get_total
RETURN NUMBER
IS
oput NUMBER (10);
BEGIN
SELECT COUNT (UNIQUE (p1.p_id))
INTO oput
FROM table_one p1
WHERE p1.p_id IN ('CYY', 'AIR', '');
RETURN oput;
END;
FUNCTION display_type_id
RETURN VARCHAR2
IS
used_cells VARCHAR2 (30);
BEGIN
SELECT UNIQUE (p1.p_id) AS cells
INTO used_cells
FROM part p1
WHERE p1.pl_id IN ('CYY', 'AIR', '');
RETURN used_cells;
END;
PROCEDURE daily_tasks
IS
name_id VARCHAR2 (20);
temp_num NUMBER (6, 2);
production_daystotal NUMBER (6, 2);
result_first_cc_a NUMBER (7, 2);
BEGIN
name_id := display_type_id (); -- used to call the function
temp_num := get_total (); --used to call the function
SELECT name_id,
TRUNC (first_partcal_a.initial_cc_a / temp_num /*over()*/)
+ CASE
WHEN MOD (first_partcal_a.initial_cc_a, temp_num) >=
ROW_NUMBER () OVER (ORDER BY name_id)
THEN 1
ELSE 0
END
INTO name_id,
temp_num
FROM (SELECT ROUND (total_as.t_as / prodmonths.proddaysinmonth
) AS inital_cc_a
FROM (SELECT COUNT (*) AS t_as
FROM table_one p1
WHERE p1.a_code = 'A') total_as,
(SELECT COUNT (*) AS proddaysinmonth
FROM (SELECT mon_dt + LEVEL - 1 AS dt,
TO_CHAR
(mon_dt + LEVEL - 1,
'DY',
'NLS_DATE_LANGUAGE = ENGLISH'
) AS dy_days
FROM ((SELECT TRUNC
(TO_DATE (m || '/' || a,
'MM/YYYY'
'MM'
) AS mon_dt
FROM (SELECT TO_CHAR
(SYSDATE,
'MM'
) AS m,
TO_CHAR
(SYSDATE,
'YYYY'
) AS a
FROM DUAL)))
CONNECT BY mon_dt + LEVEL - 1 <=
LAST_DAY (mon_dt))
WHERE dy_days IN ('MON', 'TUE', 'WED', 'THU')) prodmonths) first_partcal_a
ORDER BY name_id;
END daily_tasks;
END new_information;i have added INTO clause
and removed over() after MOD and TRUNC -
I'm getting the RT error:
Error loading 'ole32.dll': Missing export '_resetstkoflw' from 'MSVCRT.DLL'
LabVIEW RT 2011
I've reinstalled RT several times but am still seeing the error.
I only see it after closing my application.
I've attached a report of my RT system.
Any ideas on what I might be missing?
Robert C. Mortensen
Certified LabVIEW Architect
Certified LabVIEW Embedded Systems Developer
Endigit
Attachments:
ni_support.zip 1110 KBHello Robert,
I wasn't able to find too much about this error on our end, but doing a wider search it seems errors involving MSVCRT.DLL usually take place when this Microsoft C Runtime Library file is replaced by a third-party file that lacks "_resetstkoflwfunction". It's odd that the error occurs only after closing the application. Here is a third-party website I was able to find which explains this in a bit more detail, and might be a fix to try if your are comfortable: How to Fix Common Msvcrt.dll Errors?
Regards,
Deborah Y.
LabVIEW Real-Time Product Marketing Manager
Certified LabVIEW Architect
National Instruments
Maybe you are looking for
-
how do i drag and drop files from one external drive to another, i cannt get both drives to open up. only one at a time.. i have alot to learn i know but that is where i am at the time...
-
I am having issues setting up my appletv. I made the error of setting it up without having itunes on my computer. I can't get the remote to work, the light isn't on the box, and I can't get it to reset to factory default. I don't have a "-" key on
-
Error -50? Unable to download an album
Hi all. I just bough Sonic Firestorm from iTunes (the first one, not the second one, for some reason there are two identical albums in the store), and when it began to download, I got this message: There was a problem downloading "Fury of the Storm /
-
Our system at work uses WIndows XP and I can now use Remote Office to get on the system from home. Previously, I had to run Parallels Desktop for windows. Now, I can run it from Safari, except to begin the login process, I must hit the combination of
-
How to set a Default date format.
I would like to know if it's possible to set a default date format (b.e. dd/mm/yyyy) for new date object and not for the current object? Thanks