Mocha "Failed to open movie, check if the file is readable"

Can you help me? When I open up Mocha, and I import a clip, it says "Failed to open movie, check if the file is readable"
And this is with EVERY file??? Help please!!!

Please clarify! mocha is very particular about what formats and CoDecs it will import and you simply may need to convert your stuff. It simply doesn't load AVCHD or any ofd that directly...
Mylenium

Similar Messages

I can't scan with my HP Photosmart Plus B210a, I get a "Failed to open a session on the device" message everytime I attempt to scan to the computer. I'm using the most current driver off the HP website for Mac OSX Lion 10.7

I can't scan to my computer with my HP Photosmart Plus B2010a, I get a "Failed to open a session on the device" message everytime. I'm using the most current driver for OS X Lion 10.7 off the HP website.

I get the same "Failed to open a session on the device" message with Apple Image Capture as I do with the HP Utility software.

Failed to Open a Session on the Device - scanning from Mac OSX 10.9.3 - M1217nfw

Hello,
I'm running into some issues scanning wirelessly from our HP LaserJet M1217nfw MFP from any Mac running 10.9.3. I've tried to "Reset Printing System" and re-adding the printer with no success. Each time I open either Preview/Printers & Scanners/Image Capture, I receive the following error message: "Failed to Open a Session on the Device." When I add the printer, I do so by selecting the "+" icon, and selecting "Add Printer or Scanner..." selecting the printer from the list listed via bonjour, and "Select the software" but my model printer is not listed. The closest printer listed is HP LaserJet Professional M1210nf MPF Series, but it doesn't work. Any ideas here?
This question was solved.
View Solution.

Welcome to the HP Forums jpuebla,
I see by your post that you are having issues scanning, you aren't able find the drivers to add the printer.
I can help you with this issue.
The drivers for Maverick are the Apple Update drivers.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign, then select the printer from the list and click on the Add button.
(make sure it shows the printer name beside Use, not the Airprint driver)
You might have to run the Apple Updates again with USB cable connected to get the drivers installed.
Then try and add the bonjour printer again.
Test the printer again.
If you are having network issues, then add the printer through the IPProtocal.
After clicking the + button, select the IP icon across the top, type in the printer's IP address, select jet direct below and then Apply.
Test the printer.
I have seen the HP Printer Drivers v.2.16.1 for OS X drivers work successfully, if the issue persists.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

QuickTime Player7 can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i do to open movie file? on OS X 10.10.2

i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?

i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
In what file type and compression format did you download the YouTube content? I.e., to avoid such issues, you would normally download the source files as content that is natively compatible with your target player or convert incompatible file type/compression format combinations to files that are compatible with your targeted media player.

Officejet J3680, Failed to open a session on the device

Officejet J3680, connected by USB to Mac Mini with OS X 10.9.5.
It had been working fine for a long time, but now scanning is broken. Printing still works fine. Full functionality (both print and scan) works fine if I connect the USB cable to my MacBook Pro with same OS.
Specifically, I get the error message "Failed to open a session on the device." This occurs for all types of attempted access (Preview, Image Capture, System Preferences> Printers & Scanners> Scan> Open Scanner...)
I have tried various solutions, up to and including a full uninstall and reinstall, with reboots of both computer and printer.
Apple Software Update (in App Store) indicates that I successfully installed HP Printer Software Update Version 3.0.
Printing System has been Reset multiple times.
Any clues? It is super-frustrating that it works on my laptop, but not the desktop (where it is intended to be attached.)
This question was solved.
View Solution.

Hi James!
Thanks for getting back to me, and yes you're correct and forgive me for overlooking that the printer is working with other devices.
Here are some more suggestions:
Remove the print driver by following these steps first: Sunshyn2005: FRUSTRATED!!! HP 6700 Scanning feature not working with my MAC
Complete a manual uninstall next: Sunshyn2005: Re: Scan Definition
Install the v3.0 driver again: HP Printer Drivers v3.0 for OS X
If that still does not work, try Creating another user account
Hope you are enjoying your Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Failed to open a session on the device - HP Officejet 5610 scanner

"failed to open a session on the device" - HP Officejet 5610 scanner

Hello,
Thanks for the post. With this one, I've included a couple of links below that has some great information regarding scanning/MAC. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02728195&tmp_task=solveCate gory&cc=us&dlc=en&lang=en&lc=en&product=441125#N926
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02456650&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=441125#N1802
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01910186&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=441125#N156

Failed to open a session on the device

I recently updated my hp printer to version 3.0. I tried to scan a document but no longer can. I have uninstalled my printer (hp Photosmart C5280 all-in-one) and installed it again. I keep getting message that it has failed to open a session on the device. PLEASE HELP! My scanner was working fine before this last hp printer software update.

Welcome to the forums CKamm1 and @MissOctober ,
I read about the issue you are both having with your printers and seeing the message "Failed to open a session on the device". I have some links and suggestions that may help you both below.
If either of you are connected to a Mac computer, try these steps in order:
Mac OS X: How to reset the printing system
Repair disk permissions
Restart the Mac
Re-add the printer
If you are on a Windows OS, please run the Print and Scan Doctor and let me know the results from running this diagnostic tool.
Also, if either of you are still having an issue, let me know which OS X or Windows OS you're running and if your printer is making copies successfully.
Thank you
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

The processing of Group Policy failed. Windows attempted to read the file...

Hello all-
I am currently trying to configure group policy (specifically folder redirects) from a new Windows Server 2008 in my home... the server acts as both an AD DS and file server for 4 client computers, all running Windows Vista Ultimate.
Here are the steps I am currently taking:
I create a new Group Policy called All Users and Computers and apply it to the All Users and Computers OU, which contains exactly what it says (all users and computers in the domain).
I verify that a new folder was created in \\<FQDN>\sysvol\<FQDN>\Policies. The new folder created is named {6479C8E0-3134-4B4F-B047-7ADD51684684}
I change the GPO Enforced setting to Enforced.
I attempt to use the gpupdate command to see if the group policy can be updated successfully. In a command prompt, I type gpupdate <enter>. I receive the message 'Updating Policy...' then after about 15 seconds the message 'User Policy update has completed successfully.'
I keep the cmd window open. After about 10 seconds another message apperas which says "Computer policy could not be updated successfully. The following errors were encountered: The processing of Group Policy failed. Windows attempted to read the file \\<FQDN>\sysvol\<FQDN>\Policies\{6AC1786C-016F-11D2-945F-00C04Fb984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
To diagnose the failure, review the event log or invoke gpmc.msc to access information about Group Policy results."
I confirm that the error code is #3 using the Event Log, "The system cannot find the file specificed"
Of course the system cannot find the file specified because the folder does not exist in the sysvol folder. I am wondering why Windows is trying to read from this location when it does not exist, and is not the new group policy I created! I have no other group policies linked or enforced to any other OU/Domain/etc. Any help resolving this issue would be greatly appreciated.

Hello all and thanks for the help. First a few things:
I understand that the DC should not be running RRAS, but this a simple server being used in aa home environment by 4 users and getting another server just for RRAS would be overkill.
Secondly, I currently have it so that while the router is handling DHCP, I have reserved a fixed IP for the server, so it always has 192.168.1.100. If I were to use the server as the DHCP, what would my hardware configuration have to look like? I currently have the router plugged into the ISP modem, and then server plugged into the router. All other clients connect to the router wirelessly.
Here's the dcdiag output. I tried dcdiag /fix but to no avail.
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine KELLERDCFS, is a Directory Server.
Home Server = KELLERDCFS
* Connecting to directory service on server KELLERDCFS.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=keller-pa,DC=net,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
Determining IP6 connectivity
* Active Directory RPC Services Check
......................... KELLERDCFS passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\KELLERDCFS
Starting test: Advertising
The DC KELLERDCFS is advertising itself as a DC and having a DS.
The DC KELLERDCFS is advertising as an LDAP server
The DC KELLERDCFS is advertising as having a writeable directory
The DC KELLERDCFS is advertising as a Key Distribution Center
The DC KELLERDCFS is advertising as a time server
The DS KELLERDCFS is advertising as a GC.
......................... KELLERDCFS passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
Skip the test because the event log File Replication Service does not exist.
......................... KELLERDCFS passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
......................... KELLERDCFS passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... KELLERDCFS passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... KELLERDCFS passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Domain Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role PDC Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Rid Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
Role Infrastructure Update Owner = CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
......................... KELLERDCFS passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC KELLERDCFS on DC KELLERDCFS.
* SPN found :LDAP/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :LDAP/KELLERDCFS.keller-pa.net
* SPN found :LDAP/KELLERDCFS
* SPN found :LDAP/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :LDAP/42268b36-801f-4a6d-b162-34f3b01e04bb._msdcs.keller-pa.net
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/42268b36-801f-4a6d-b162-34f3b01e04bb/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net/keller-pa.net
* SPN found :HOST/KELLERDCFS.keller-pa.net
* SPN found :HOST/KELLERDCFS
* SPN found :HOST/KELLERDCFS.keller-pa.net/KELLER-PA
* SPN found :GC/KELLERDCFS.keller-pa.net/keller-pa.net
......................... KELLERDCFS passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC KELLERDCFS.
* Security Permissions Check for
DC=ForestDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=keller-pa,DC=net
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=keller-pa,DC=net
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=keller-pa,DC=net
(Configuration,Version 3)
* Security Permissions Check for
DC=keller-pa,DC=net
(Domain,Version 3)
......................... KELLERDCFS passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\KELLERDCFS\netlogon
Verified share \\KELLERDCFS\sysvol
......................... KELLERDCFS passed test NetLogons
Starting test: ObjectsReplicated
KELLERDCFS is in domain DC=keller-pa,DC=net
Checking for CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net in domain DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net in domain CN=Configuration,DC=keller-pa,DC=net on 1 servers
Object is up-to-date on all servers.
......................... KELLERDCFS passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
......................... KELLERDCFS passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 1600 to 1073741823
* KELLERDCFS.keller-pa.net is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 1100 to 1599
* rIDPreviousAllocationPool is 1100 to 1599
* rIDNextRID: 1111
......................... KELLERDCFS passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: DFSR
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... KELLERDCFS passed test Services
Starting test: SystemLog
* The System Event log test
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:53:59
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 17:59:02
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:04:04
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:09:06
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:14:08
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:19:10
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:24:12
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:29:15
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:34:17
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:39:19
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An Error Event occurred. EventID: 0x00000422
Time Generated: 07/07/2009 18:49:23
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\keller-pa.net\sysvol\keller-pa.net\Policies\{6AC1786C-016F-11D2-945F-00C04FB984F9}\gpt.ini from a domain controller and was not successful. Group Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
......................... KELLERDCFS failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=KELLERDCFS,OU=Domain Controllers,DC=keller-pa,DC=net and backlink
on
CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
The system object reference (serverReferenceBL)
CN=KELLERDCFS,CN=Topology,CN=Domain System Volume,CN=DFSR-GlobalSettings,CN=System,DC=keller-pa,DC=net
and backlink on
CN=NTDS Settings,CN=KELLERDCFS,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=keller-pa,DC=net
are correct.
......................... KELLERDCFS passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : keller-pa
Starting test: CheckSDRefDom
......................... keller-pa passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... keller-pa passed test CrossRefValidation
Running enterprise tests on : keller-pa.net
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
PDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
Preferred Time Server Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
KDC Name: \\KELLERDCFS.keller-pa.net
Locator Flags: 0xe00013fd
......................... keller-pa.net passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... keller-pa.net passed test Intersite
Here's the nslookup from Vista client:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Andrew>nslookup KELLERDCFS
Server: UnKnown
Address: 192.168.1.100
Name: KELLERDCFS.keller-pa.net
Addresses: 192.168.1.150
192.168.1.100
C:\Users\Andrew>
Thanks again!

Exporting PDF files from SSRS 2012 - "There was an error opening this document. The file is damaged and could not be repaired"

Good day
I have the situation where we are exporting PDF files from reporting services in our website.
When dividing the data into sections, the report exports perfectly, but when exporting the entire set and trying to open the file, we get the following error in Adobe Reader:
"There was an error opening this document. The file is damaged and could not be repaired"
We tried to repair the file, no luck. We tried to use different PDF readers, no luck
We then checked the file sizes. When exporting the subsections, each section exports a file of about 2mb.
When exporting the entire set, the file is about 1.3mb.
Adding all the sections together gives me a rough estimate of 40mb.
Exporting to TIFF works beautifully and returns a file of 41.5mb. Word and Excel formats also work well, only issue there is the page numbering and formatting.
The problem we have is the clients are adamant about having it in PDF format.
Any advice please?

This was one of the temporary suggestions I gave the client...
Unfortunately they do not like this as the page numbering and formatting in Word does not appear right. We are talking about over 1300 pages. I can't expect them to change the formatting with each export. Additionally, the data is
constantly changing and each client has their own data. The clients export the reports randomly. I therefore can't post the reports back onto the server.
Thanks for the speedy response though

Adobe pdf problem; the message comes up:- There was an error opening this document. The file is damaged and could not be repaired.

Dear all
I have got 3 mac computers. 2011 13 inch air, 27 inch mac and 2010 pro. latest softwares. all of them have a problem in opening pdf files;esp older files. the error message comes up 'There was an error opening this document. The file is damaged and could not be repaired.'
I have reinstalled reader, checked software updates etc.
Any help will be appreciated

It isn't likely to be a problem with the software. You have two different applications which have no interaction between them, neither of which can open the same group of files on three different systems. It's possible that one application has a problem, but not both or that one system has a problem, but not all three. Typically if there were software corruption, it would not show as a failure to open a specific type of file, but in opening and running the application itself.
I realise that that doesn't really help you since it doesn't resolve the poblem, but I think you need to start with a known-good pdf, preferably one you can download from an internet source, and see whether that opens. If it does, then it would confirm that the software is working properly.
For a known-good PDF to download, try one of the manuals from the support site here.

There was an error opening this document. The file is damaged and could not be repaired. Error mess

Hello, I am hoping someone can help me. I have an invoicing program that allows me to send an invoice as a PDF to a customer in an email. It always worked fine but for some reason anyone that gets the PDF email attachment gets the message " There was an error opening this document. The file is damaged and could not be repaired". I don't know why this is suddenly happening. I downloaded the latest Adobe Reader 10.1 and that didn't help. I also downloaded the trial version of Adobe Acrobat X and that doesn't help either. I can open all PDFs on my drive but for some reason my program seems to have a problem converting or writing the invoice file to a PDF. Anybody able to help? Thank you very much!

Hi Bill,
Thanks for your response, I'll try and answer your questions as best a possible. I am not printing to anything, just emailing and I'm not sure what you mean by "the adobe PDF printer". I originally could not find for sure what acrobat I was using although there is a file in my C drive with acrobat 5.0. When I tried downloading an update I found for that version, it told me it couldnt download the update because the original is not there. I then downloaded the new trial version of acrobat X in the hopes that may work, but it did not change the issue. I believe my invoicing program uses some internal PDF program inbeded in the invoicing program for the emailing option it provides. I did send the email to myself and it is the same as I send to anyone else, it has that error message. The others in my office can open the invoicing program and email the PDF perfectly fine to themselves and to me, it's only when my computer tries to send the invoice through email that we have the problem. I can view the file (invoice) perfectly fine. I do not not how to check this encoding you are referring to. Do these details help you, to help me?? Thank you again for your help.

The Microsoft Access database engine cannot open or write to the file \\fileserver\db\access.mdb

Hi,
I have Windows Server 2012 with SQL 2012 Standard SP1. I am using linked server, and Access Database Engine 2010 Redistributable to access my database file made in Microsoft Access (.mdb) from network file server.
EXEC master.dbo.sp_addlinkedserver @server = N'MyLinkedServer', @srvproduct=N'MyLinkedServer', @provider=N'Microsoft.ACE.OLEDB.12.0', @datasrc=N'\\myfileserver.mydomain.com\files\mydatabase.mdb'
My SQL service is running with domain service account MYDOMAIN\SQL1$ , i have added Full control for file share and NTFS permission on my file server folder (C:\Files).
When I open (as domain admin with UAC elevated permissions) on my DB server SQL Management studio, I can browse tables and everything works.
The problem is, if I open SQL management studio (as domain admin with UAC elevated permissions) on my File server or any other computer, when trying to browse my linked server i got error:
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Synesis_3PRO2013". (Microsoft SQL Server, Error: 7303)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
When I try to place simlpe Select SQL query I got error:
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "MyLinkedServer" returned message "The Microsoft Access database engine cannot open or write to the file '\\myfileserver.mydomain.com\files\mydatabase.mdb'. It is already opened exclusively by another
user, or you need permission to view and write its data.".
I do not have any other program using my access database, and user has full control. I am trying to use in security mode - "For a login not defined in the list above, connections will be made without using a security context", i have also tried all four options.
I am confused becouse it works from SQL server but from any SQL client domain member computer/server it does not work.
I have same problem in another environment where I have Windows Server 2008 R2 and SQL 2008 R2 SP2.
Please help.
-- Hrvoje Kusulja

NTFS must be fine since it works from same server using same accounts.
As I understand, adding my access file to Access trusted location could be a problem. I have tried now to add my access database file location to trusted locations for user which is my SQL service user (Windows Service - AD managed service account MYDOMAIN\SQL1$)
and my test user which I use to connect to sql server as a client from sql management studio. (Account is Domain Admins and have full permissions on SQL server also)
I have added this .reg:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security]
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Documents]
"LastPurgeTime"=dword:01592874
"DisablePromptOpenNetworkTrustedDocuments"=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations]
"AllowNetworkLocations"=dword:00000001
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations\Location0]
"Description"="My file server"
"AllowSubFolders"=dword:00000001
"Path"="\\\\myfileserver.mydomain.com\\files\\"
I have done this for SQL service account user and my personal test account as I said. I have tried to logoff and restart sql service and all servers also.
The same problem still persists.
Anyway, thank you for giving me a hint.

Gvfs-open $file opens nautilus instead of the file

Hi. This happened after some pacman -Suy, but I noticed just now.
gvfs-open, xdg-open, clicking on a downloaded file in Firefox or transmission-gtk opens a containing directory in nautilus and highlights the file instead of opening it.
Clicking the file in Nautilus does open the file.
Last edited by leniviy (2012-03-25 05:33:31)

So you just plugged your external drive iwith the library into the new computer?
Then it may be a permissions problem. Are you using the same user name as previously for your user account?
Do you have the "ignore ownership on this volume" flag enabled? If not, try this to avoid permission problems. You set the flag from the "File > Get Info" panel for the drive.
When the permissions on the drive are set correctly, use Aperture's First Aid Tools to repair the permissions in the library.
See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Also check, if the drive has the correct formatting - MacOS Extended (Journaled)
If the filesystem should be wrong, you need to reformat the drive with Disk Utility, but that requires to remove the library to a different drive, because reformatting will erase the drive.

Steady Stream of "Searching for movie data in the file..." Error Messages

My iMovie has been crippled by error messages that pop up whenever I try to accomplish anything in iMovie. I always see "Searching for movie data in the file 'healyintro.mov'" for a few minutes, then "The movie file 'healyintro.mov' cannot be found. Without this file, the movie cannot play properly." I cannot actually use iMovie because of these errors.
I've tried everything from reinstalling iMovie to removing application support files to removing my iMovie Events and iMovie Projects folders to creating a .mov file, calling it healyintro.mov and seeing if that'll shut iMovie up – nothing works.
Once in a while, iMovie will ask for a different movie file, with the same problem.
Any ideas?

I am having the same issue. I don't know what the previous poster means by allowing the system to continue, since I'm prompted with a "Cancel" / "Search" dialog after each missing clip. Slight digression: "Search" is not even the correct term here according to UI guidelines ("Choose" or "Locate" might be better choices given the file picker dialog that results).
I'm actually using Aperture to relocate my video masters on removable media, which is a very nice feature of Aperture, but completely breaks iMovie unless it's connected. Seems like a pretty major oversight.... can we just have it fail more gracefully here and allow us to work with new stuff without getting hung up on missing movie clips from the past?

How to check Whether the File is in Progress or used by some other resource

Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.Kathir

Hi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM

Mocha "Failed to open movie, check if the file is readable"

Similar Messages

Maybe you are looking for