MOD files in FCE?

How can I get FCE to read MOD files? (from a Canon FS11)

You can't. You should use MPEG Streamclip to convert the files to QuickTime.

Similar Messages

Import MOD files to FCE

OK - I replaced my Sony handicam with a Panasonic because the Best Buy folks told me that it would be completely compatible with a Mac; however, I can't get FCE to see the files at all.
Here is a picture of the files that I see on the camera:
http://farm5.static.flickr.com/4022/45290896193690725e08o.png
I assume the two .mod files are the movie files, right? How do I get them to work with FCE?

Skalicky: You said:
"FCE works extremely well with a few common recording formats. It's only when people purchase a camcorder before reading up on exactly what is involved to edit the material that you get problems."
I can still return my camcorder for a full refund. But all of the other ones that I've looked at use MPEG file format which has the same problems. All of the Sonys and JVC's are that way, as far as I know. Is there something else out there that would play nice with FCE? If so, I'll return this one and go get it.
I don't want to have to import to iMovie, create a movie there, export as Quicktime (which takes forever if there's a lot of video) then import to FCE. That seems like a lot of effort for something that should happen more easily.
I do understand that I can pay $20 for the MPEG-2 converter, and maybe I'll just do that.

High quality format conversion for .mod files?

I'm using MPEG Streamclip to convert .mod files to formats acceptable to FCE 3.0. I've tried a few dozen possibilities, but the files are either unreasonably huge (687 MB for 23 seconds of video) or of poor quality. Does anyone know of a high quality format that requires something on the order of 3.6 MB/min? A previous post (http://discussions.apple.com/thread.jspa?messageID=4815749&#4815749) recommends DV or HDV, but MPEG Streamclip gives many options for DV. Any help would be much appreciated.

They come from a Panasonic SDR-H200. The .mod clip in MPEG Streamclip looks great. Here's the information MPEG Streamclip gives for the clip:
Type: MPEG program stream
Duration: 0:00:23
Data Size: 12.48 MB
Bit Rate: 4.45 Mbps
Video Tracks:
224 MPEG-2, 704 × 480, 4:3, 29.97 fps, 9.54 Mbps, upper field first
Audio Tracks:
128 AC3 2/0, 48 kHz, 256 kbps
Stream Files:
MOV001.MOD (12.48 MB)

Unable to View .mod files in Photoshop Elements 11, can see they are there but no picture, I import them into Premiere and all OK ?

I have hundreds of .mod files which are supported but I am unable to view them on my Adobe Photoshop Elements 11. I cant see the picture icons as pictures or see the vision when i select them? I am running the latest Windows 8.1 PC with heaps of Ram and memory. If I import the files into Premiere they play fine?

Thanks Curt and 'Mylenium'
I did re-set the prefs - but to no avail
I checked and my graphics driver and audio is all up to date.
No sure how to verify Windows Media Player's hardware acceleration options. I opened WMP Options /Perfformance tab and under Cd the DirX tab is checked.
Running Windows Vista - so does the same caution apply regarding a re-install of Windows Media Components and DirectX ?
Appreciate your help with this somewhat frustrating issue. I am converting some old 8mm film to avi with the hope of doing some edits then burning to DVD.
Cliff

HT3775 I have a bunch of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document "001.MPEG" could not be opened. A required codec isn't available." Any advice on getting these to play?

I have a slew of .MOD files I cannot play from our Canon video cam. I tried renaming the files as MPEG or MOV, I get the message "The document “001.MPEG” could not be opened. A required codec isn't available." Any advice on getting these to play? Thanks!

Try installing Perian or VLC. Some AVIs require a codec which simply isn't available for Mac OS X.
(85018)

How to use .mod files from a JVC camcorder?

Hi All,
I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
Hopefully someone has a workable solution for these files.
Thanks,
Chris

Hi all,
I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
Problem solved.
Thanks.

HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

how can i convert a mod file (on vlc) to mp4 to work on quicktime
when i connected my video camera and imported the videos, they're default is to play on vlc
they are mod files
i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
what do i do

iPhone supports
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If your video is supported, drag it to iTunes and sync it to your iPhone.

How do I send computer .MOD files to Premiere 7 with quality?

I have a JVC Everio Hard Drive Camcorder with SD-Video format. Recording/Playback format is MPEG-2 with audio 2ch. Dolby Digital. I recorded at Ultra Fine mode (720 x 480 pixels). Downloaded these files to my computer with Windows 7, a Dell, Studio XPS 8100 with processor, Intel (R) Core (TM) i7CPU, 860 @ 2.8 GHZ; RAM 8 GB; Type 64 Bit. CamCorder has only USB connector no FireWire. The downloaded files have a file extension of .mod. When I started a project in PE 7 the playback was less than desirable. Presets 4:3 at standard. Would appreciate help. Have used the downloaded PE7 manual and the Muvipix Guide to PE 7 for guidelines.

Thanks for your time and info.
Reading the Threads a few questions have arisen as I am getting ready to import media to PrE from my computer. It appears that PrE can import .MOD files without any conversion. Therefore would converting to AVI files increase the quality or be a waste of time? Secondly, many are extolling the virtues of Premiere 8. Would this update be of value to someone like me who takes videos on a limited scale but many digitized photos?
Jim

How to load color table in a indexed mode file??

How to load color table in a indexed mode file??
Actually, if i opened a indexed file and want to edit color table by loading another color table from desktop (or any other location), any way to do this through java scripting??

continuing...
I wrote a script to read a color table from a GIF file and save to an ACT color table file. I think it might be useful for someone.
It goes a little more deeper than the code I posted before, as it now identifies the table size. It is important because it tells how much data to read.
Some gif files, even if they are saved with a reduced palette (less than 256), they have all the bytes for the full color palette filled inside the file (sometimes with 0x000000). But, some gif files exported in PS via "save for web" for example, have the color table reduced to optimize file size.
The script store all colors into an array, allowing some kind of sorting, or processing at will.
It uses the xlib/Stream.js in xtools from Xbytor
Here is the code:
// reads the color table from a GIF image
// saves to an ACT color table file format
#include "xtools/xlib/Stream.js"
// read the 0xA byte in hex format from the gif file
// this byte has the color table size info at it's 3 last bits
Stream.readByteHex = function(s) {
function hexDigit(d) {
    if (d < 10) return d.toString();
    d -= 10;
    return String.fromCharCode('A'.charCodeAt(0) + d);
var str = '';
s = s.toString();
     var ch = s.charCodeAt(0xA);
    str += hexDigit(ch >> 4) + hexDigit(ch & 0xF);
return str;
// hex to bin conversion
Math.base = function(n, to, from) {
     return parseInt(n, from || 10).toString(to);
//load test image
var img = Stream.readFromFile("~/file.gif");
hex = Stream.readByteHex(img);      // hex string of the 0xA byte
bin = Math.base(hex,2,16);          // binary string of the 0xA byte
tableSize = bin.slice(5,8)          // Get the 3 bit info that defines size of the ct
switch(tableSize)
case '000': // 6 bytes table
tablSize = 2
break;
case '001': // 12 bytes table
tablSize = 4
break;
case '010': // 24 bytes table
tablSize = 8
break;
case '011': // 48 bytes table
tablSize = 16
break;
case '100': // 96 bytes table
tablSize = 32
break;
case '101': // 192 bytes table
tablSize = 64
break;
case '110': // 384 bytes table
tablSize = 128
break;
case '111': // 768 bytes table
tablSize = 256
break;
//========================================================
// read a color (triplet) from the color lookup table
// of a GIF image file | return 3 Bytes Hex String
Stream.getTbColor = function(s, color) {
function hexDigit(d) {
    if (d < 10) return d.toString();
    d -= 10;
    return String.fromCharCode('A'.charCodeAt(0) + d);
var tbStart = 0xD; // Start of the color table byte location
var colStrSz = 3; // Constant -> RGB
var str = '';
s = s.toString();
     for (var i = tbStart+(colStrSz*color); i < tbStart+(colStrSz*color)+colStrSz; i++) {
          var ch = s.charCodeAt(i);
          str += hexDigit(ch >> 4) + hexDigit(ch & 0xF);
      return str;
var colorHex = [];
importColors = function (){
     for (i=0; i< tablSize; i++){ // number of colors
          colorHex[i] = Stream.getTbColor(img, i);
importColors();
// remove redundant colors
// important to determine exact color number
function unique(arrayName){
     var newArray=new Array();
     label:for(var i=0; i<arrayName.length;i++ ){
          for(var j=0; j<newArray.length;j++ ){
               if(newArray[j]==arrayName[i])
                    continue label;
          newArray[newArray.length] = arrayName[i];
     return newArray;
colorHex = unique(colorHex);
// we have now an array with all colors from the table in hex format
// it can be sorted if you want to have some ordering to the exported file
// in case, add code here.
var colorStr = colorHex.join('');
//=================================================================
// Output to ACT => color triplets in hex format until 256 (Adr. dec 767)
// if palette has less than 256 colors, is necessary to add the
// number of colors info in decimal format to the the byte 768.
ColorNum = colorStr.length/6;
lstclr = colorStr.slice(-6); // get last color
if (ColorNum < 10){
ColorNum = '0'+ ColorNum;
cConv = function (s){
     var opt = '';
     var str = '';
     for (i=0; i < s.length ; i++){
          for (j=0; j<2 ; j++){
               var ch = s.charAt(i+j);
               str += ch;
               i ++;
          opt += String.fromCharCode(parseInt(str,16));
          str = '';
     return opt
output = cConv(colorStr);
// add ending file info for tables with less than 256 colors
if (ColorNum < 256){
     emptyColors = ((768-(colorStr.length/2))/3);
     lstclr = cConv(lstclr);
     for (i=0; i < emptyColors ; i++){
          output += lstclr; // fill 256 colors
output += String.fromCharCode(ColorNum) +'\xFF\xFF'; // add ending bytes
Stream.writeToFile("~/file.act", output);
PeterGun

How to burn .MOD files from my thumb drive to a DVD

How can I copy my .MOD video files that are on my thumb drive to a DVD-R?

I'm not familiar with that file format, but apparently it is used for some audio and some video files. Here's an article that might be of interest:
http://www.masternewmedia.org/news/2008/06/12/howto_convert_modvideo.htm
Your basic challenge is to convert the format into Quicktime DV Stream (.dv) for greatest compatibility with iDVD. You can also check with Apple to see if upgrading to iDVD08 would solve the problem by being able to handle the format conversion internally. Be sure they understand how the .mod files were created.
John

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

Working with MOD files in iMovie 08

Hello. I have a jvc everio camcorder. I started trying to import my footage with iMovie 08, but as it reads all the cam videos, it is too slow and crashes are common. I decided to copy all my MOD files to hard drive and select only the desired clips, but now, it seems I can't import directly the MOD files.
Should I change the file extension or convert the clips to work with iMovie? With iMovie 06 I must convert clips to DV, what is slow and takes a lot of time and space.
How do people with hard disk camcorders work with iMovie 08?

Hi,
The portal component runs at the Server side - the server can't access directly to End-User files.
but you can use the FileUploader control to load the file change it at the server and post it back with the response.
Regards,
Yehuda

.MOD files in Premiere CS5

I am trying to import .MOD files into Premiere CS5, with no joy.
If I change the file extension to .MPG, Premiere can import the video, but no audio.
Can anyone advise on how I can import .MOD files successfully, with both video and audio?
Many thanks

Oh boy, JVCs ill fated .mod file extension. I hate this thing. Hate it. It's next to impossible to do anything with. When i first got a JVC tapeless cam in 2004 it ran this extension. All I used with it was the pack in software that worked fine. Well over the years I started using more advanced cams and more advanced software. A year ago I wanted to go back to that old cam and use some old footage for a DVD project, in PrPro cs4. It was a nightmare. I finally, FINALLY, found the answer after using several NLEs, converters, and such to get it to work in adobe. So here's what I found:
from my experience, basically all interactions with JVC tapeless media has left little to be desired. i have done many dvds in .mod format because i had gotten the very first JVC tapeless cam in 2004ish. the .mod files are.... almost imposible to work with, outside of using cyberlink. i tried sony. i tried adobe. i tried FCP and all results... were dismal. (i was filming in 16x9 the rograms that DID read .mod, which was Vegas, would not accurately flag the footage as Widescreen) the ONLY way i could get the widescreen footage to show up as widescreen other than using cyberlink software was to use
http://www.cyberlink.com/products/mediaespresso/overview_en_US.html
and convert to a straight up no strings .mpg2 file. then it worked in the other NLEs. So basically the only way I could successfully import and edit a .mod file with premierepro was to use that converter.

What is the best way to handle .mod files in premiere pro cs4?

I recently got a JVC Everio GZ-MG130u and as I'm sure many of you are aware, it saves footage in the .mod format.
I have googled this and found quite a few different solutions, but I'm just wondering if anything has changed since some of these solutions were posted, or in other words, what is the best way at this current point in time to handle .mod files in premiere pro cs4?
As far as I know, the best thing to do is convert the .mod to .avi and then import it into premiere so it can be edited.. Is there a better way to do it than this? Also, by doing it this way, will I have separate audio and video tracks?
Thanks.

I have just done a bit of reading, here. All of the quotes that follow are from users who have posted in that thread.
It seems that there isn't one solid answer on this subject. The thread that I linked to was started 2 years ago, and replied to just 4 ago, so it's relatively current.
I noticed a couple different interesting statements:
posted by mmontgomery:
In the case of .MOD, you are actually getting a MPEG-2 file. The way
video files work is that there is a codec (COmpressor/DECompressor)
algorithm and a file wrapper (or extension). A JVC .MOD file is a
MPEG-2 encoded file, with a .MOD extension.
You're faced with two
challenges, first the .MOD file type is only recognized and support by a
few applications. I think we covered some of those already. The
interesting thing about wrappers and extensions is that they can be
dealt with in a variety of ways. Sometimes all you need to do to convert
the video file to a compatible video file is to change the extension.
In the case of .MOD files that's not enough. The .MOD wrapper apparently
does a few more things than just bare a unique extension name. It
requires a slightly more complicated method to convert that file. That
is why there is supplied software and that certain third party
applications have .MOD support.
(posted 2 years ago)
This seems to indicate that Ann's solution of simply re-naming the extension is not good enough, unless I am mis-interpreting what she meant.
However, another user said:
posted by futball8:
I edit with Adobe Premiere Pro CS3. All I have to do is simply rename
the .MOD files as .MPG and then import into PP CS3. It takes a small
amount of time to conform the audio, but no file conversion is
necessary. It's a pretty slick workflow and I've never encountered any
problems editing them this way.
(posted 5 months ago)
One can only assume that simply re-naming the extension from .mod to .mpg works in some circumstances, and doesn't work in others. I assume it depends largely on the editing software being used. Perhaps there are still issues that futball8 was simply unaware of or never encountered.
That said, there seems to be a couple of different real solutions to this problem that I have found:
1. Simply use an editing program that supports .mod file format. While pe7 and pe8 supposedly support the .mod format, the following should be noted:
posted by macksgarage:
While Elements 'supports' these files, it is markedly unstable and frequently crashes while using the files, though the application is otherwise reliable. The solution I have arrived at is to repair the container using ffmpeg. (see #3)
(posted 5 months ago)
2. Use a file conversion utility of your choice that will covert .mod to .avi, or another desired format. Import the resulting .avi file into premiere pro cs4.
3. Use FFmpeg. This seems to be the best solution as it does not convert any audio or video:
posted by macksgarae:
If you are not familiar with ffmpeg, it may be a bit of a bear to
learn, but it's not only useful for this, but functions as a video swiss
army knife useful for splicing, muxing/demuxing, and rendering just
about any format into just about any other format.
ffmpeg is an open source project from the linux world, but it has
been ported and is supported on windows. Fetch it here and place it somewhere handy
on your system.
To rewrite the container into a nice, standards compliant .mpg file
that doesn't make applications die, WITHOUT rerendering video or audio
itself, I use this command.
ffmpeg -i INFILE.MOD -acodec copy - vcodec copy OUTFILE.mpg
This not only renames the file, but actually rebuilds the container
around unmodified video and audio data, yielding a file which works much
more stably with Adobe applications, and presumably others as well, as
ffmpeg's open source development goals result in very standards
compliant files.
(posted 5 months ago)
Now, this seems to properly address the issues that can arise from simply renaming .mod to .mpg, as suggested by Ann. So from this point, I assume you can simply import the .mpg into Premiere Pro cs4 (or any other .mpg compliant program) and edit without issue, but it seems like I remember hearing something about Premiere not liking mpegs or something like that, so in that case, maybe it'd be better to skip this and go with option #2. But, it's been awhile since I've touched any NLE, much less premiere pro cs4, so I could be completely wrong and it may have no problems handling mpegs.
All of the things that I've quoted here came from the same thread, so I don't know how accurate any of this is, but the people that have posted these things seem fairly knowledgeable. If someone reads all of this and can confirm or deny any of it, it would be much appreciated.
Option 1 is not really an option for me, because I am sticking with premiere pro cs4 -- I'm not going to get another editor just because it has .mod support. That leaves me with options 2 and 3: Convert to avi, or change the file wrapper/extension properly with FFmpeg and then simply import the resulting .mpg file... Which is better? Or is there yet another solution that I am unaware of that would be even better?

Importing .MOD files without having the .MOI files

Hi
I have a Panasonic sdr-s100 which records MPEG2 video in the .MOD/.MOI format onto sd cards.
Apart from the current 40+ restriction issue (see other posts), iMovie 08 imports new footage perfectly fine from my sd-card through my card reader.
The real problem I am having is with the older footage I recorded over the last year and a half. You see, I deleted all the .MOI files which were - until iMovie 08 got released - commonly regarded as useless once you had the movie/.MOD files on your hard drive. It was assumed these were only needed by the camcorder. How wrong we all were!!
So now I am having these neatly organized folders on my hard drive (100GB>) containing just the .MOD files, which iMovie refuses to recognize under File>Import. Copying the .MOD files back to an sd-card seemed like another option but iMovie 08 needs the accompanying .MOI files for the "Camera detected" message to pop up.
There is another thread (on which I have also posted), where we are trying to find some way to regenerate those .MOI files or use other similar methods, but none are really successful as yet. We also contacted JVC and Panasonic but it is not looking good so far. See here: http://forums.macosxhints.com/showthread.php?t=77489
Ideally, iMovie 08 would import my .MOD files straight from my hard drive without the need for .MOI files and simply use the .MOD's date modified info as the time stamp within iMovie 08. I do not wish to go via the DV route and re-import etc as it is way too time-consuming.
Has anyone got any other tips or similar problems? In the meantime I have sent this issue to Apple Feedback.
Message was edited by: RafDam

MP_Root (at the root level of the card directory structure) and putting a folder 101PNV01 inside the MP_Root folder. I then put some mpg-2 file in the 101PNV01 folder, started iMovie '08, inserted the flash card and had the files recognized so I could import them.
Great. This works!
Here is what I did (and this should work for anyone who has old .MOD files but no longer has the accompanying .MOI files):
Like F Shippey stated
1) Create a root folder on your sd card (in my case, via a USB card reader) or USB stick (not tested) called Mp_Root.
2) Inside this folder create another folder called 101PNV01.
3) Rename the extensions of all your .MOD files to .MPG and copy them inside the 101PNV01 folder.
4) Restart iMovie08. It will now detect a new camera and import all clips using the date created/modified info as timestamps for perfect cataloging!
iMovie 08 does NOT re-encode the movie files, which is great cos it's very quick plus you retain 100% the original quality. It simply puts them in a .MOV container and creates a separate movie file for the thumbnails.
Thanks for your help F Shippey!

MOD files in FCE?

Similar Messages

Maybe you are looking for