Mod's needed to help
Hi all, I would really appeciate some intervention by the mods
Ive been having problems for quite some time now, my bb runs smoothly for a few weeks then i get a noise on my line and the IP profile drops to 135, im connected to the master socket and have done all the usual tests.
Ive also done a quiet line test and heard nothing.
Iv'e had 4 engineers here and all have found no problems with my line, i would appreciate any help with lowering my noise margin and resetting my IP profile if poss, or advice. I have another engineer visiting on wednesday but to be honest i have no faith that they will be able to fix my problem.
here are my adsl stats
Line state
Connected
Connection time
0 days, 6:11:17
Downstream
1,248 Kbps
Upstream
448 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
17.4 dB / 16.0 dB
Line attenuation (Down/Up)
63.0 dB / 31.5 dB
Output power (Down/Up)
16.3 dBm / 12.3 dBm
Loss of Framing (Local)
59
Loss of Signal (Local)
113
Loss of Power (Local)
0
FEC Errors (Down/Up)
40827 / 91
CRC Errors (Down/Up)
1958 / 2147480000
HEC Errors (Down/Up)
nil / 59
Error Seconds (Local)
6286
Many thanks in advance
Solved!
Go to Solution.
your connection has reset since yesterday and your noise margin has increased and your speed decreased. unless you reset the connection it must have been the hub suggesting you have a problem with your connection aqnd probably it's to do with noise on the line.
There is no point in resetting your profile until you can get a stable connection as at the first disconnection you will end up back where you are just now.
when engineer comes on wednesday you need to get him to see if he can solve your noise problem. did you do anthing about the crackle on your line?
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks
In the article Resolve iOS update and restore errors this is what it says about error 14:
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section. -
Ipod touch (2G) stuck in "restore" mode. Need HELP please
I have contacted Apple support several times since Friday and was just hung up on by an extremely rude lady in customer support. I am really frustrated and just trying to get my 5 yr old little boys ipod touch working again.
The situation is that our son's old computer crashed. So we have a newer computer set up for him. Reinstalled itunes on it. Called Apple on Friday, really nice rep gave me several instructions for transfering purchases, making sure everything was up to date and turning home sharing on. Did all that, got off the phone with him and then the computer tells me that the ipod needs and update.
Clicked ok, and update starts going for a few minutes.....then get an error message that says that the ipod is basically stuck in "restore" mode and needs to be reset to factory settings. It won't let me do anything to the ipod. It won't restore, reset, anything. Just shows a picture of usb cable and says to connect to itunes.
Connect to itunes and it keeps giving me say error message.
Will someone please help me? Apple support sure won't.Did you try to connect in recovery mode, to start the restore process again? Connecting in Recovery mode is explained here: http://support.apple.com/kb/HT1808
Also delete the ipod ipsw firmware file on your computer, to make iTunes download a new copy to restore from. Depending on your OS, this file can be found here:
XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPod Software Updates
Vista and 7: C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPod Software Updates
If you're getting error numbers, take a look at this article: http://support.apple.com/kb/TS1275 -
I have restored my ipod nano 6th generation and am being told it is now in recovery mode so needs to be restored which is what i have just done. I can't get any further than this. Please help.
Are you really running Windows 98? I sure hope not. :S
I have noticed a few others with the same problem the past couple of weeks. Many of them were able to resolve the issue by doing a low level reformat of the iPod's flash storage using the instructions in this article.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay KumarHi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.
You should contact Microsoft for Mac Support and/or post in their forums.
-
HT201210 i have a broken button and my ipod is in recovery mode i need help i dont no what to do
i have a broken button and my ipod is in recovery mode i need help i dont no what to do
What happens when you try to restore via iTunes?
What button is broken? -
hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz, it just happen wen i was restoring the screen is balck but wen i restore it from itunes it says erorr 1600 and itunes does not reconise the phone , i have tryed eveything bt still no luck , I NEED UR HELP PLZZZ ,its my disabled daughters thank you
Anyone on this forum can correct me if I am wrong. I am not judging you, but to my knowledge the iTunes error 1600 usually affects products that are jailbroken. again I am not saying that your iPhone 3GS was jailbroken. my only advise off the top of my head to assist you is to download the recent IOS firmware online. I know it is not the the #1 advised option, but it is the only option you have unless you wish to bring it to the Apple Genius bar and see if they can replace the phone or fix it themselves.
-
I have Mac mini and there is partition of boot camp but some miss understanding the osx 10.8.2 is deleted and while I m going to recovery mode the portition can not removing and the also cant repaired what I do I need urgent help ???? Please ?????
Do you have a Time Machine backup or clone? If not,
all is lost if you have in fact deleted your OSX partition
and you will have to do a reinstall from Recovery HD
and install all else. -
please i need your help i made update to my ipad to the last version then i find it in recovery mode and tried to restore it using i tunes but it the same in recovery mode please i need your help to solve this problem
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
I'm suddenly in need of help with my Firefox browser (6.0.2)
Hi there,
I'm suddenly in need of help with my Firefox browser (6.0.2)
(OS: I use Windows XP).
When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
This problem started today, 8th September, 2011 and has never happened before.
Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
I've also noted that just before I "open up" Firefox, I now get a small box saying:
[JAVASCRIPT APPLICATION]
Exc In Ev handl: TypeError: This oRoot.enable is not a function
This has never appeared before - I hope it offers a clue a to what is wrong.
The Browser is not stuck in Safe Mode, by the way.
Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
(A friend is sending this query on my behalf from their pc)
Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
Many thanks in advance.A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I need urgent help! I may have accidentally deleted everything on my friends computer!
Okay so my friend asked me to watch his house while he was away. He told me that I was welcome to use his computer or anything else in there. I went to log on to his iMac, but all the accounts were locked! So I searched for a way to get in (with my phone, online) and I found a process with the following steps:
1. Reboot
2. Hold apple + s down after you hear the chime.
3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
* mount -uw /
* rm /var/db/.AppleSetupDone
* shutdown -h now
4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
I did not plan on deleting the old one, I just wanted to create a new one. But after following these steps the computer went into setup mode as if it was just being started for the first time out of the box! Please, I really need your help because e has important files on the computer that he did not back up anywhere and I hope I didn't delete everything! He is upset with me already, but said we would be alright if I found a way to fix it. I really need your help, please answer as fast as possible!!I think you're OK actually...
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
Admin Hack...
http://www.hackmac.org/?q=node/4
Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one. -
I need some help with the GUI design.
Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred -
Hi.. Need ur Help
Hi
Please tell me details steps in ALE and Idoc .. i am very new and need ur help plz tell in details with example..
thanks..Hi,
ALE
check url
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/ale/configuration.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapdevelopment.co.uk/training
And also u can get lots of inof from the below link.
http://www.sapgenie.com/ale/why_ale.htm
IDOC
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Check these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
Please check this PDF documents for ALE and IDoc.
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
Regards,
Priyanka.
Maybe you are looking for
-
I have just got iPad and am trying to download my music from iPod , I ran out of space so bought some more gb on icloud!!! I now have 55gb and have 54.6gb to use, my iPad says I have no space left!!! How do I xfer gb from icloud to my iPad to continu
-
PLD - Relate to functionality?
Dear Experts, I am designing the PLD for Cheques for Payments, for which I need to show the Payee as "Vendor Name, Vendor's Bank Name, Vendor's Bank Account Type and Vendor's Bank Account Number" or simply put as for e.g. "Murtaza R.E., ICICI Bank, S
-
Validate Se;ection Screen
Hi Gurus!! Apart from At Selection-screen event, are there any ways to validate Selection-screen inputs? Plz do reply me Pratibha J
-
Reg : SAP Router Configuration
Dear Friends, How to configure the SAP router? If anybody have configuration details pls help me. Our System is ECC 6.0 OS - 2003 Server DB : MS SQL Server Then How to Communicate to SAP. Regards kesav
-
My configuration Oracle 9ias 1.0.2.2.x Reports 6i Patch 13 (cannot upgrade yet - vendor support issues), 2 W2K servers running a copy of print server each. If I want to use report clustering (Master / Slave) or just be able for the application to sea