MOD wheel only goes up to MIDI value 86

Hi all,
My MOD Wheel, controlling modulation data in Logic pro X, only gives MIDI values from 0-86.
Even when the wheel is at the top, the data never goes above 86.
Would anyone know how to get it to output values from 0-127?
Thanks
Josh

You can also download this MIDI Monitor to check and make sure your keyboard output is working correctly.
http://www.snoize.com/MIDIMonitor/

Similar Messages

Mod Wheel Only Goes Down To 45

This is a very recent problem. My modulation wheel now only wants to go down to around 45. It will go all the way up to 127, and hit it around 3/4 of the way to the top. I have checked all the keyboard settings I know to check. It shows it only going form 45 to 127 in both Logic and on the keyboard display. It is a Kurzweil PC1X. I am sure that this is keyboard related, but I can't find a good Kurzweil place to ask questions, and thought you guys might be able to help me. Also, I thought there might be a way to define the mod wheel parameters in Logic. The mod wheel is very important to me, because I normaly use it to control velocity for Vienna Instruments.
Oh, and as a side question. How do I find out what the different midi controllers are called on my kepboard? If, for example, I were to use a seperete controller to control velocity, and wanted to redraw some things after performance in the Matrix editor, how would I find out which midi controller it is from the list of options? Thanks very much.
Colin Thomson

I can't help with the Kurzweil because I don't know it.
About controllers, usually in good keyboards, like yours, you can customize them choosing which MIDI message they send; they are described in the keyboard manual together with a MIDI implementation table.
If you want to see in Logic what happens when you use a controller open the Event List (under the Window menu).
cheers
rob

Mouse wheel only goes up? in Bridge (Photoshop CS4)

I'm experiencing a problem with Bridge (CS4) where the mouse wheel only scrolls upward. Trying to scroll down causes erratic behaviour. If you scroll in normal speed it always returns to the top. If you spin the mouse wheel down fast, Bridge will scroll down some then move back up a little. No problems in any other Adobe product such as Photoshop CS4.
Has anyone duplicated this behaviour?
Any solution?
NOTE: WACOM tablet mouse works correctly.
Regards,
Darv

Same here. When using a Microsoft Wireless Laser Mouse 6000, I can only scroll up (or left in filmstrip view). Using a Logitech mouse scrolling works OK. I have been using the Microsoft Mouse for several years on Windows Vista x86 and the scrolling has been working OK in all applications including Bridge CS4 (and Photoshop CS4, Lightroom 2.6 and so on). It is only when using Bridgde CS4 on Windows 7 x64 that I have problems with the scrolling (again scrolling works OK in Photoshop CS4 x86, Photoshop CS4 x64, Lightroom 2.6 x64 and so on).
Update: I just checked and the scrolling actually works in the side panels. It is only the film strip and in the light table that scrolling is defective.
Seems to be some kind of bug in Bridge CS4 when running on 64-bit Windows?

Midi controlled filters, aka use mod wheel to change cut off frequency

Does garageband have any filters that you can control in real time via midi? Such as dynamically changing the cut off frequency of a low pass filter.
I'd love to do a classic filter sweep using the mod wheel.
Are there any midi controlled AU plugins that can do this?

Any automation in GB is done via the automation curves.

Automating Mod wheel data after midi input

Hi all,
So what ive done is create a Bodyrox style patch on the ES2 and linked the mod wheel using the routing to cutt off 1+2 and Env3 release. I have inputed my midi via piano roll but not want to add the automation for the mod wheel so that I can open and close the feed to the cut offs and release through out the piece.
I have a feeling I am over looking something really obvious, but isn't it always the way!
Regards Craig

It's even easier to record Hyper Draw:
Record over the existing MIDI region and move the Mod wheel... you'll record the CC data in Hyper Draw mode, which you can view in the Piano Roll by clicking on the Hyper Draw button (bottom left of Piano Roll).
Here you can fine edit the Hyper Draw info if needed.
Hope that helps
Rounik

How can I add a mod wheel?

I've got a Yamaha P-120 keyboard which I use as a controller for Logic. It's a really nice keyboard that I love playing on, but it doesn't have a mod wheel on it, and I'd really like to be able to send modulation data into Logic to take advantage of sophisticated sample libraries. Is there some way to add just that functionality?
One thing I thought of is getting an expression pedal, which the P-120 supports, enabling it to send expression data into Logic. Does Logic have some way to remap the incoming expression data to modulation data? Any other ideas? Thanks.

Never having used a pedal, I can only guess, but here goes:
First make sure your your pedal is plugged into your keyboard and your key board into your computer.
Then create a physical in object in the environment if there isn't already one there.
Next, attach a monitor object to the sum output of the physical in object and try using your pedal. You should see the monitor respond accordingly, displaying series of 3 numbers. Pay close attention to those numbers.
Now hook up the output of your monitor to a tranformer object and set the transformer's mode of operation to 'apply operation and let non corresponding values through'. Then set the transformer condition section to Control and the first 2 numbers to those your monitor outputs, leaving the 3rd field as thru.
Set the operation section to Control, fix 1, fix 1, again leaving the third field blank, and hook the object up to the instrument you want to control, or better still to the seq input.
That should be just yummy!
PowerBook G4 12" Mac OS X (10.4.8)

How do you crossfade with mod wheel?

I'd like to be able to xfade between 2 samples during a single note in exs.
eg both trumpet soft and trumpet loud triggered. then use the mod wheel to change their relative levels so that at either extreme only 1 or other of the sample is heard.
can't seem to figure out how to do that, but i'm sure its possible.

Hi Rohan,
There are a couple of ways to do this in with the EXS, but the following seems to work the best for me.
Using the trumpet soft and loud sample example...
You would assign all of the soft trumpet samples (zones) to a layer in the EXS editor. Click on the triangle in the upper left hand corner of the layer box to expose it's parameters. And where it says "Select Range", assign values that would correspond to the lower throw of the mod wheel, in terms of MIDI values. In the case, something like 0 - 63.
Then put the loud samples on a second layer, and assign it's "Select Range" to the other half of the mod wheel throw. (64-127)
Then, go to the front panel of the EXS. And in the first section of the Mod Matrix, where it says "Dest" (destination), select "Sample Select". And where it says "Src" (Source), select "Ctrl #1" (Controller #1, which is the Mod Wheel).
If you played the trumpet sample now, and moved the mod wheel, you would hear an abrupt "switch" from soft to loud samples.
So now, look at the box in the upper left hand corner on the front of the EXS, and you'll see "X-Fade". The "amount" parameter will adjust how quickly the 2 samples crossfade, and the "type" parameter allows you to select the type of crossfade you employ. Experiment with different values here, to see what works best for your situation.
It's actually a very easy thing to set up, but I'm afraid my explanation might come across as anything but!
A few things to note...
Crossfading between samples of differing dynamics (i.e. soft>loud) tends to work better, or at least achieve convincing results when it's an ensemble, as opposed to a solo instrument. At least with some of the samples I have tried it with. Also, having 3 or 4 dynamic levels yields far better results than just 2. However, doing this with the trumpet example is entirely possible, but the quality and consistency of the samples plays heavily in the outcome. For instance, the solo trumpet from VSL's Opus 1 uses the mod wheel to shift from soft to loud, using 3, maybe 4 separate layers, and the transitions are very smooth.
Hope that helps...

IMac G3 Gray screen w/logo & Spinning Progress Wheel only!

When turning on my iMac G3 DV SE 400, Slot-Load, Graphite (1999-10), OS 10.3 (Panther), it only goes as far as a gray screen with the Apple logo and the spinning wheel (gear) (Progress wheel) below the logo, and that's it.
I've started up in Target Mode and transferred everything to my PowerBook.
I've started up from disk 1 of 10.3, went to Utilities and did a disk repair a few times.
I did a Restore from the same disk, but only that disk; there is no way to eject, except for manual, and then when the second disk is inserted (and re-starting, holding the "C" key), it just goes into the spinning Progress wheel routine.
My next step is to Erase the Hard drive, and then reload the 4-disks of 10.3.
Is this the correct thing to do? Is there something else I should be doing?
I suspect there is a corrupted piece of data that is preventing the computer from advancing during start-up, and erasing and re-loading 10.3 will clear it up. Wishful thinking?
Thanks in advance for any help.

You have already started up from Disc 1 and run Disk Utility from there. All you have to do now is go to the Erase tab. Make sure you have selected the internal DRIVE, not the volume indented below the drive, in the Disk Utility sidebar. If you want to be able to boot Mac OS 9 from the drive, check the checkbox to install Mac OS 9 drivers (there's no harm in checking it either way). Click Erase.
This will reformat the drive and any disk directory error should go away, assuming there are no underlying hardware issues with the drive.
You can then return to Installer and install Mac OS X on a clean drive. This will make any problems you may have had with the previous system go away.
After your system restarts, it would be a good idea to run Disk Utility (from the internal drive) and use the +Repair Disk Permissions+ routine. Then, immediately run Software Update to install the latest OS updates. You may have to restart and run it a second time to pick up all the dependent updates.

Mod wheel won't stop moving selected fader?

Anyone else seen this problem? Moving my mod wheel moves whichever fader is currently selected in the mixer. I can't make it stop. Automation Quick Access is turned OFF. Any ideas?
Thanks,
Michael

How is it that no one has responded to this question? Is anyone out there? I have had exactly the same problem. The music on my iPad is a complete mess -- some albums are missing, others are missing half of their music and have those little red bulls eyes (the ones that show downloading progress) next to them. It's utterly useless.
When I plug it into my Mac Book Pro, sometimes it just hangs on "preparing to sync" but other times it goes through "downloading purchases from ipad" and then thinks it's all done. I also tried to turn off sync music, and to put it on "sync all music" but iTunes continuously puts it back on "sync selected." It has been doing this for months on end now.
I have looked all over these forums and on the web, and all I see is frustation. My only recourse I guess is to move on from Apple, or use some other program that Apple hates, like MediaMonkey. Apple really has become a bottom of the barrel provider -- your updates only introduce new problems that no one can seem to help with.
And please don't suggest I jump through hoops with iCloud -- I have. I have deleted the account, I've turned everything off, and I've turned off and on the "find my ipad" feature, I've turned off an on the "sync over wifi" -- all suggestions from others, and the same thing happens in iTunes no matter what settings are on or off, or what combination of settings are on or off. It simply will not sync the music library, making my ipad just a piece of wasted space and money.
I really don't know what else to do. I know no one will respond to me any more than they did to the original poster, but I had to vent my complete frustration -- it was either type, or take a sledge hammer to all my apple products.
Samsung, here I come.

Reporting Issue "Opening Balance values are going to Not Assigned Values"

Hi Friends,
Closing Balance values are perfectly showing but opening balance values are going to Not Assingned Values? I am not able to find it out.
our query is built on PCA Daily Multiprovider.
Pls Help.
Thanks
Asim

Hi Ravish,
Here are the details
Stock values and quantities in the PCA cube of BW never show correctly at an article level due to an opening balance issue. This reduces our ability to report on stocks at moving average price, i.e. anything that actually matches the financial values in the system. The issue arises because stock at the beginning of the year (quantity and value) for any site is only shown against an article of "Not assigned." Stock movements during the year are shown against the appropriate article.(If you have a new site, the will have stock assigned against an article up until 31 December and then the 31 December values are shown against "not assigned" for the next year).
Thanks
Asim

External monitor revolution only goes up to 1080p

Hi everyone,
     I just get my new monitor Dell U2713hm today, but I am so disappointed that the resolution of the new monitor only goes up to 1080p. The font looks blurry, so I want to adjust it to higher resolution. I have tried to use Dual link + MDP, HDMI + MDP, and MDP to HDMI cable(CONNECT, by Belkin, and it's labelled "4k" on it box). Still, none of them works...
     It's so annoying for see blurry things on the screen, please help... Thank you so much!!!
     I attach the screen shot to provide more details.
The above picture is showing the profile of my external monitor.

From MacBook Pro (Retina, 15-inch, Mid 2012) - Technical Specifications
Graphics and Video Support
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
Are you using OSX or Windows (or some other OS)? What happens when you Option+Click on Scaled button? Here is an example.

Mod Wheel not changing Articulation ID

I'm using the Samson Carbon 61 keyboard controller to program drums with Drum Kit Designer. The decice is working correctly. But when using the GM + Mod Wheel for Hi Hat control, the Mod Wheel doesn't make any changes in the Articulation ID parameter. I already checked and the Mod Wheel is sending the corresponding CC#1 (Modulation) messages to the software correctly. Does anyone know how to solve this?

Hi
The Art Of Sound wrote:
Normally it must send such messages on Channel 10... not Channel 1 which is the default for most Keyboards. (Logic reads all Chans usually)
<snip>
If I am incorrect, maybe Edgar might step in with further advice...
Not Edgar, but...
DrumKit Designer uses Articulation ID's to control the HiHat Open/Closed amount. Switching to GM+ does indeed work the Open/Closed amount here on F#1, G#1 and A#1 notes with the Mod Wheel. It works regardless of MIDI transmission channel and regardless of the Instrument track MIDI Channel.
You may note that playing say an F#1 with the Mod Wheel on Max will give you an open Hat sound, but moving the ModWheel back to zero will not give you a "pedal closing" hat sound. You have to play the note again.
If the controller device is correctly sending MIDI CC1, the OP may want to switch DKD for the EXS24 after loading the desired kit and setting the GM+ in DKD. You could then open up the EXS Editor Groups pane and watch check that they are being selected as you play a note repeatedly whilst moving the Mod Whl.
CCT

In mode SEM - How to report de Earned Value?

Hi all,
I´m using Project Server 2013 in SEM mode.
Before without Project Server, the PM changed the "actual
physical percentage" to reporting
earned value. Now, I'm surprised with this post Physical
Complete.
If the physical percent complete
is disabled in the SEM mode, how reporte
the % progress on earned value?
Thanks a lot.
Roy Enriquez

Hi Dale,
My turn to ask a question, hoping to take advantage of your precious knowledge.
One of my colleague just faced this issue and tell me that it was possible with PS2010. Meaning that evenif the "Only Allow Tasks Updates Via Tasks and Timesheets" options was selected, PM were allowed updating the physical % complete in Project Pro. Can
you confirm this behavior? In case it is right, it appears that MS changed it in PS2013 (tested with both PS2013 SP1 on premise and Project Online).
In your point of view, does this behavior make sense? It prevents PM to do EV analysis based on the physical % complete. Moreover the physical % complete does not impact actual work, that why I'm questioning the relevance of this behavior.
Thanks in advance for your help.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Mod Wheel controls fader, not modulation???

When using the mod wheel on a M-Audio keystation 61es through a Roland SI-24 on Logic Pro7.1, the mod wheel doesn't affect any plug-in parameters (cut-off, etc). Insted it changes the fader on Audio Track 2 and Audio Instrument 6. Any help?
-Justin

Hi
The Art Of Sound wrote:
Normally it must send such messages on Channel 10... not Channel 1 which is the default for most Keyboards. (Logic reads all Chans usually)
<snip>
If I am incorrect, maybe Edgar might step in with further advice...
Not Edgar, but...
DrumKit Designer uses Articulation ID's to control the HiHat Open/Closed amount. Switching to GM+ does indeed work the Open/Closed amount here on F#1, G#1 and A#1 notes with the Mod Wheel. It works regardless of MIDI transmission channel and regardless of the Instrument track MIDI Channel.
You may note that playing say an F#1 with the Mod Wheel on Max will give you an open Hat sound, but moving the ModWheel back to zero will not give you a "pedal closing" hat sound. You have to play the note again.
If the controller device is correctly sending MIDI CC1, the OP may want to switch DKD for the EXS24 after loading the desired kit and setting the GM+ in DKD. You could then open up the EXS Editor Groups pane and watch check that they are being selected as you play a note repeatedly whilst moving the Mod Whl.
CCT

Just updated to Yosemite and now can't open mail, or finder or others. That wheel,just goes round and round

i just updated to Yosemite and now can't open mail or finder or other apps. Wheel just goes round and round

I just uninstalled it and am waiting for it to reinstall. I sincerely hope that I have not lost everything that I worked on so hard. Now that mobile me is gone, I have not been able to go between devices to transfer things. I was merely trying to take a document I had worked on and open it in pages, but it said my version was too old. When I updated, it wouldn't load. Now I cannot do anything. I hope that the reinstall fixes it without losing everything. Please advise!!! Yes, I am in panic mode.

MOD wheel only goes up to MIDI value 86

Similar Messages

Maybe you are looking for