Modbus - HELP for final exam

Good morning.
We are two students of a technical institute who are attending the last year and as a topic of dissertation for the " state exam " are using language with Labview Modbus . The purpose of this experience is to be able to carry through a program run with Modbus and Labview , monitoring of the photovoltaic devices via 3 "SLAVE" ZR- TIDCI - OPT1 -EM and a "MASTER" ZC -GW -ETH -EM . We started trying to understand the various library functions NI Labview Modbus present in starting and helping with the examples already set in the program and then process them. We were able to set the various elements, such as the IP address of the MASTER , the IDs of the slave etc. . , But after several steps we are stuck because of an "ERROR 63 occurred at TCP Open Connection" .
The error is present in the block " TCP Write " in the " MB Ethernet Transmit" .
A possible cause of the problem could be the "transaction ID " ?
Some might auitarci ?
The exam is near ...

Hi all,
did you try to run the ModBUS TCP (Master/Slave) Examples? They are very simple and are good starting points for developing more complex applications.
Download the modbus_library here. You'll find the above example in the .llb you'll download.
Anyway the error 63 come from a wrong TCP setting (IP Address or Communication port). Check if the communciation port is not currently used by other processes or try to change it. Try to run master and slave examples on the same machine with "localhost" as IP address.
In the following there are some Modbus error related links:
What Are the Most Common VI Server Errors?
How Do I Use Remote VI Server Over the Network?
Introduction to Modbus
I hope that these informations will help you with your exam preparation.
GOOD LUCK and best regards.
Cla_CUP
NI ITLAY
AE Dept.

Similar Messages

Help for Final Cut Pro X training book.

Hello everyone!
I've recently decided to study to get the Apple Certification for Final Cut Pro X level 1, so I bought the book "Apple Pro Training Series: Final Cut Pro X" by Diana Weynand. Due to a mistake of mine, I bought the edition released on October 2011, knowing later that there is a 2012 version and a new one coming out in just a month.
I'd like to know if I can still handle the exam studying this book released on 2011, or if I necessarily need to get the latest version coming out sooon.
Thanks in advance for your help!
- Alex

I understand. I don't feel like waiting so much time, so I need to choose.
1 - Start studying my old 2011 book since I have it here, and see if I can make it before the exam is updated (I have no idea how much time it'll take me to study the entire book though, even if I study everyday).
2 - Buy the Motion 5 book and get that certification while waiting for the new FCPX book to come out.
3 - Just waiting for the new FCPX book (which means wasting time waiting).
Thanks for your answers and patience.

App needed to lock up calculator for final exam

Well appearantly I cannot use my iPhone as a calculator for the Discrete Math Final as it has too many features. I need an app that will only run the calculator app for the 3 hour exam and lock out all other perations. This is an app I need to have approved by the University Registrar Fred.
HELP I don't want to learn another piece of hardware or carry it around.
Ken

So what I want my iPhone to do is be NCEES certified for the FEE .
The lock out should be part of the parental controls.
Ken
Calculator policy
NCEES allows only the following calculators to be used on the Fundamentals of Engineering Exam:[4]
Casio fx-115 (all models)
Hewlett-Packard HP 33s and HP 35s
Texas Instruments TI-30X and TI-36X (all models)
The calculator must clearly display its model number so that exam proctors can quickly identify the calculator and approve for use during the exam. The list of allowed calculators is revised each November. It is crucial that any examinee check the NCEES website to verify their calculator is acceptable. Absolutely no other calculators are allowed. Using a non-permitted calculator after the exam has begun will result in the examinee having his or her exam confiscated immediately and the exam will not be scored. All selected models, depending on student background (HPs areReverse Polish Notation) are efficient in solving problems.

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? i´m from Mexico i speak spanish

Hi, I downloaded the app for macbook "Lens Flare for Final Cut" and I've struggled a lot to install this app at final cut . Someone could help me ? how i can install this app in Final Cut? this app cost me money and not is working to me, i am disappointed sorry if a write bad, i´m from Mexico i speak spanish

This is a user2user board for FCPX - maybe better you discuss your issues with the makers of that 'plug in'
Seems for me a bit 'fishy', isn't it? - other professional plug-in makers deliver with an installer... That advice at AppStore, how to install it, is ... rare:
How install it ? – click the launch button. Motion 5 will start itself. When Motion is open click save as. Write a generator name - Lens Flare and choose category RGB HOUSE or make it. Click Publish and you are done. If you don’t have Motion 5 look at support site - how to install in FCP.
How it works ? – In Final Cut Pro you will find in Generators RGB HOUSE group, where will be Lens Flare. Drag this generator above all clips in timeline. When it’s there remember to change blending mode to Screen (in video section). You can adjust color, steak color, glow, intensity, scale - apacity and blur of artifacts, position. Any parameter could be stored as a keyframe, so You can easily animate the flare.
so, I don't speak Spanish, lets have some fun with translate.google...:
Cómo instalarlo? - Haga clic en el botón de inicio. Motion 5 comenzará Misma. Cuando el movimiento está abierto clic en Guardar como escribir un generador de nombres -. Resplandor del objetivo y seleccionar categoría RGB CASA o hacerlo. Haga clic en Publicar y ya está. Si usted no tiene el movimiento 5 vistazo a sitio de soporte - cómo instalar en FCP.
Cómo funciona? - En Final Cut Pro se encuentra en el grupo generador RGB CASA, donde serán destello de lente. Arrastre este generador por encima de todos los clips en la línea de tiempo. Cuando es allí te acuerdas de que cambiar el modo de fusión a la pantalla (en la sección de vídeo). Usted puede ajustar el color, color carne, brillo, intensidad, escala - falta de definición apacidad y artefactos de su posición. Cualquier parámetro podría almacenarse como un fotograma clave, por lo que puede animar fácilmente la antorcha.
Hope it makes at last a little sense... I don't trust these automatic translators
(the German translation is ... awesome funny!)
Finally: it's from 2012! Needs probably an update - contact the dealer!

How do I order vouchers for Certification Exams for Final Cut Pro?

how do I order vouchers for Certification Exams for Final Cut Pro? This is for an Educational Institution.
Thanks,
Rufus Chaney

I am at the district office of a school district. One of our high schools is an Apple Authorized Training Center with a Certified Instructor. The instructor is asking for vouchers for his students in order to complete he exams. We would also like to like to make them available to oher schools within the district.

FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP. CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER IS USEABLE. THANK YOU

HAVE INSTALLED PAGEMAKER, BUT BECAME CONFUSED WHEN "STUFFIT" SEEMED TO BE REQUIRED FOR NEXT STEP. NEED HELP IN FINAL STEPS IN DOWNLOADING PAGEMAKER FOR USE.

>I would like to purchase a new mac with the appropriate operating system that will
run pagemaker 7. If not, I understand that my current mac, Mac OS X, version
10.6.8, processor 2.8 GHz Intel Core i7, Memory 4GB 1067 MHz DDR3 will not support
either Pagemaker 7 or InDesign. My question is what package can I purchase that
will satisfy one or both of these needs? Thank you for any guidance.
R_Kelly created the discussion
"FREE TRIAL ON PAGEMAKER INSTALLED, BUT REQUIRES STUFFIT FOR FINAL STEP.
CAN'T SEEM TO MANAGE THIS STEP. NEED HELP MANAGING THE FINAL STEPS BEFORE PAGEMAKER
IS USEABLE. THANK YOU"
To view the discussion, visit: https://forums.adobe.com/message/6607524#6607524
>

I need help: Canon HF S10 settings for Final Cut

Hello, i am a German guy, so i am sorry that my english is not very well.
I got the Canon HF S 10 from Japan, so its an NTSC one. For Cutting i am using Final Cut Pro. I want to produce online Videos in the best possible Quality.
My Problem is, that i dont know witch settings i should take for best Quality.I already tryed much. The Quality is good if i dont move the camera. If i move it the Video becames very bad Quality.
The Cam has these possibilitys:
Frame Rate: 60i (Standard), PF30, PF24.
24Mbps (MXP), 17Mbps (FXP), 12Mbps XP+,7Mbps (SP), 5Mbps (LP)
I dont know with import Settings i should use for Final Cut.
Could you please help me to find the right settings?
Thanks alot

I tryed it, but there is no besser result. Could you maybe help me again? If i import from my hdd cam, i just need to put the Final Cut Settings for the Sequenz right? There i put ProRes 1920 x 1080i60.
I push import and it opens the window to import my files. There are also settings on the top:
P2 Plugin
P2 AVC-Intra - Nativ
AVCHD Pugin
AVCHD - Apple ProRes 422 (HQ)
AC - 3 Audio - Matrix Stereo
Is that all right?

Student Help advice! what is best iMac model for Final Cut Pro and logic pro

Hi
I am currently looking into getting a iMac, but is toggling to device if I need a 27inch or a 21inch(top model),which will be used for Final Cut Pro and logic
There is a lot of money being invested iMac, and I really not want to be stu k with a computer that not going to keep up with the amount of work load in the future.
The specs that I have on mine are..
21inch
Upgrades include
Sdd drive 512gb
Intel core i7
16gb of ram
Or
27 inch
Upgrades
Fusion drive or sdd 250gb
Intel core i7
(Possible graphic card) NVIDIA GeForce GTX 680MX 2GB GDDR5 [+ £105.60]
(Ram is way to expensive so will buy from second party)
Anyone who has brought a iMac for final cut or logic what would you likely buy?..Am really stuck on the hard drives between the 27inch fusion and 512gb on the 21inch
My budget is £1900
My fear is that the 21inch top model's graphic card may not be good enough for advance editing on Final Cut Pro In the future when I start to get more deep into editing..logic really only needs 8gb to run smoothly..buts its the final cut specs that am having problems deciding. I know iMacs are not future proof or technology lasts for that matter, but I do expect to have it run good for a number of years before I upgrade again.
If anyone can give me some advice, or even tell me about there set up they have for media work please let me know.

All kinds of things affect system & HD performance, I can't tell you why your 4 year old Mac is slow. Just because your old Mac is slow doesn't mean that a new iMac will be equally slow.
You are correct about the issue with the smaller fusion drives. It's one of the reasons I am not high on recommending them. Everyone thinks they want power & performance but don't understand the gap between marketing and real life performance. The 1TB fusion drive however should give you a good combination of rapid access and sizeable storage capacity.
I have used external FW800 / 7200rpm drives for years and have never had a problem with any of them. I consider them very reliable but admittedly I DO NOT use consumer drives like the WD MyBook that the big-box stores sell. For the most part I assemble my own with OWC Mercury Elite enclosures. In the past few years I have centered on WD Caviar Black and WD Scorpio Black drives. I also have some Seagate Barracuda 7200.xx drives. They all perform excellently and reliably.
Pls. refer to my earlier post for what i recommended to you.

Tough question, but how much study is usually required for cert. exams

I have been working for 3-4 years as a Configuration Manager administrator, mostly in CM12. I have strong areas, like OSD and application deployment, and weaker areas, like PKI/https and Compliance Settings. I consider myself to be an advanced technician
or engineer.
I am considering System Center Configuration Manager certification (70-243), but am wondering how much of an endeavor this is likely to be. Can others that have taken this or similar certificate exams please advise me? In weighing the value of certification,
I am wondering if I will be likely to succeed with a 100 hour commitment, or is it going to much more substantial a time investment?
I know this will vary wildly depending on how quickly a person learns and what they already know, but would love to have some idea before I decide to go down this path. I welcome your feedback and experience.
Gary

Hi Gary-
As you mentioned, the time it takes to properly prepare for an exam varies quite a bit. So it will be helpful if other people chime in with their experiences too. For most Microsoft exams, there are topics that you know and work with, topics
that you've read about but not worked with, and topics that are new to you. Let me break down how this impacts the amount of time required to study:
Topics that you know and work with. Some people might think that these topics don't require study time. I think they do require study time. That's because most admins have a specific method that they use in their work.
That might not be the method that the exam tests you on. For example, in ConfigMgr you might use the management console for the majority of your work. The exam may test you on PowerShell. It may ask a basic question about performing
a task that you know how to do in the management console but the only answer choices are PowerShell. Or, they may test you on a new feature in R2 when your environment isn't running R2. I recommend that you review the latest enhancements to R2
and spend a bit of time investigating alternate methods to perform tasks. I estimate about 4 or 5 hours on this.
Topics that you've read about but not worked with. These topics require study. I recommend that you read about them and work with them. For example, you should read about configuration items AND implement them in a lab
environment. There are several learning styles and often people don't know which style is most effective for them. Some learn by reading, some learn by doing, some learn by hearing, etc. Typically, you will retain more knowledge by combining
the learning styles. For me, I typically start by playing with a technology in my lab for a few hours. Afterward, I will read about it. Then maybe go back to the lab. For others, it may be different. But definitely experiment
to see what feels right for you. I recommend that you avoid just reading about something that you've never worked with because it will make the exam difficult to pass.
Topics that are new to you. These topics require the most study. As Alberto pointed out, use the Skills Measured section. Print it out. Each time you finish reading and exploring a technology and feel comfortable,
cross it off. For these new topics, definitely get your hands on them in a lab. Even if you only spend a few minutes with each one.
For me, I usually allocate about 2 weeks to study for an exam. But study time during that two weeks comes in between regular work and family stuff. Maybe a couple of hours a day total and a few extra hours the day before the exam. In the
past, I've allocated as little as 1 week to prepare for an exam. For beta exams, I've walked in several times without any preparation. In all cases, I always think that I should've spent a couple of extra hours.
If you've never taken a certification exam or a Microsoft certification exam, you'll want to spend more time than others who have taken exams. But, one thing I typically tell people is not to spend too much time studying. It will work against
you. If you spend 8 weeks studying, by the half way point you will start forgetting the stuff you studied in the first week. When the exam comes up, you'll have probably forgotten half of the stuff you studied. I recommend a maximum of 4
weeks of study for an exam like this. A book dedicated to 70-243 will be helpful but should be combined with hands on time in a lab environment. If you don't have a lab to work in, check out the free TechNet labs for Configuration Manager at
http://technet.microsoft.com/en-us/virtuallabs/bb467605.aspx. Finally, don't worry about failing an exam. It is often the one thing that can help you the most in your exam
preparation! I advise that you schedule the exam. Pick a date a couple of weeks out and commit by scheduling it. If you fail, you will know exactly what you need to do before you take the exam again!
Brian

What is the IDOC for Final Approval of PO

Hi,
Can any one tell me ..
1. what is the IDOC for Final Approval of Purchase Order?
2. Is there any Separate IDOCs for GRN(Goods Receipts
Note) in Transaction MIGO. Like Creation of GRN,
Changing of GRN, Cancelling of GRN, Transfering materials to Scrap or Cost center (Changing of Movement types in MIGO).
regards,
Khaja.

Khaja,
1. There is no separate IDOC for final approval of a PO. IF you have configured a release stratgey for a PO, the PO IDOC will be transmitted only upon the final apporval of the PO.
2. Yes there should be a IDOC for Goods Receipt.
Regards,
Ravi
Note : Please mark the helpful answers

Where can I find a full manual for final cut pro 6?

I'm trying to learn final cut because I haver an amature film making contest I'd like to enter and that would give me quite an edge, considering most of the intries will be using movie Could someone help me find a full manual or something that would assist in this indevor? I do only have final cut 6 because I am using my schools imac and that is ther vertion they have. so, can anyone help?

You should ask your question in the Final Cut Studio forum.
This forum is for Final Cut Pro X.

Following Media Files Are Not Optimized For Final Cut Pro

I'm sure you've seen this before and I've tried to search for a thread on it here and fell asleep, so sorry if this is a repeat.
I have edited projects in Premiere Pro (on my PC) and I have tried to transfer them in FCP. It worked with the exception of two things:
1. the error message, "Following Media Files Are Not Optimized For Final Cut Pro"
2. the quality *****! watching it on the playback in FCP it looks great, but then when I burn it to Disc it's pixelated in spots and generally has a lower quality picture.
I know that it's Standard Def. and can't expect the best, but I've done it before (once or twice) and it didn't seem this bad.
Can someone suggest anything to help the quality? Should I run my AVIs through MPEG Steamclip to make it a QT file and if so what is the best format in that since there are many to choose from and most I'm not familiar with?
Thank you,
Crayton

I did compress them to DV NTSC then burned it to DVD and the result was no bueno.
I thought what I would do is try compressing them again before I send them on over to DVDSPRO. Here is a simplified break down of the situation:
- I have edited the raw footage in Premiere Pro on my PC. They were recorded and captured as SD.
- I rendered them in Premiere, then transfered the rendered AVI file to FCP.
- When went to place the files in FCP, I received the warning message; "Following Media Files Are Not Optimized For Final Cut Pro" but I went forward anyways and it allowed me to do so.
- Originally I went ahead and compressed them from FCP to QT Movie as a DV NTSC, which ended up poorly.
- Therefore my question is, should I compress them using another file type (other then DV NTSC)? Which leads me to another program that I have called MPEG Streamclip, which offers tons of file types of which I am unfamiliar with most. I want the best quality of course but don't know what file type is the highest going from AVI to a format that can be accepted by FCP and ultimately DVDSPRO. Keeping in mind that I only have FCP5 and do not have Prores.
Did that make sense?
Thank you again,
Crayton

I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

I need to buy a camcorder -- upgrading from a Flip. Which would you recommend as easiest to use with iMovie 11? Which for Final Cut Pro? Thanks!

You can't run iMovie 11 on a PPC G5 running the old OS 10.3 Panther - which is what you say you have.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

Is the NVIDIA GeForce 8800 GS worth the money for Final Cut Express?

Hi,
I'm considering a new iMac 24, but not sure if the speedier on is worth the money.
Currently I use a MacBook Pro 2.2 for Final Cut Express with a 23" cinema (mostly DV, some HD) and that works okay, but won't play back in real time when I composit video.
Anybody know if the NVIDIA GeForce 8800 GS will help in that area?
Thanks,
KC

The speedier video card is great for 3D stuff, but it won't matter a wink for Final Cut Express, which barely makes use of the video card.
Keep in mind that Final Cut is using the CPU, not video card, to perform the editing, decoding, and encoding of the video. The only time the video card comes into play is during playback of the video, and any of the video options available for iMacs will handle that just fine.
When you composite video, the hard-disk throughput will start to come into play. The dinky 5400 RPM disk in your laptop will adversely affect the performance of that.

Managed Bean Help for Definition Help

I am working on creating Managed Bean Help for Definition Help as described in ‘19.5.3 How to Create Managed Bean Help’ section of the Web User Interface Developer's Guide fpr ADF. Using JDev Version 11.1.2.1.0.
Thought I had all the artifacts assembled but when I run the log message is: <ELHelpProvider> <_getTranslationMap> ELHelpProvider's helpSourceExpression is null.
Any suggestions would be greatly appreciated.
Here is the managed bean:
public class ELHelpProviderProjRequest extends ELHelpProvider {
    public ELHelpProviderProjRequest() {
    /* To use the HelpProvider, the EL expression in the helpTopicId attribute must point to a Map, otherwise
       * you will get a coerceToType error. */
    public Map<String, String> getHelpMap()
          Iterator iterator = _HELP_MAP.entrySet().iterator();
          while(iterator. hasNext()){
          System.out.println("hash map entry " + iterator.next());
        return _HELP_MAP;
    static private final Map<String, String> _HELP_MAP = new HashMap<String, String>();
        static {
          // each element [put] can be for a separate helpTopicId attribute
          _HELP_MAP.put("MAPHELP_CATEGORY_CAPITAL_DEFINITION", "Map value for credit card definition");
          _HELP_MAP.put("MAPHELP_CATEGORY_OTHER_DEFINITION", "Map value for credit card instructions");
} Here is the adf-setting.xml in Application sources / META-INF:
<?xml version="1.0" encoding="windows-1252" ?>
<adf-settings xmlns="http://xmlns.oracle.com/adf/settings" >
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/settings">
<help-provider prefix="MAPHELP_">
    <help-provider-class>
        com.corpnet.abc.util.ELHelpProviderProjRequest
    </help-provider-class>
    <property>
      <property-name>helpSource</property-name>
      <value>#{helpTranslationMap.helpMap}</value>
    </property>
</help-provider>
</adf-faces-config>
</adf-settings>Here is the faces-config:
<managed-bean>
    <managed-bean-name>helpTranslationMap</managed-bean-name>
    <managed-bean-class> com.corpnet.abc.util.ELHelpProviderProjRequest </managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
</managed-bean>Here is the helpTopicId in the inputText component:
<af:inputText value="Test" inlineStyle="font-weight: bold;" id="it31" simple="true" helpTopicId="MAPHELP_CATEGORY_CAPITAL" readOnly="true"/>

Register the managed-bean as a help provider in the adf-settings xml like:
Example 19-9 Registering a Managed Bean as a Help Provider
<adf-settings xmlns="http://xmlns.oracle.com/adf/settings">
<adf-faces-config xmlns="http://xmlns.oracle.com/adf/faces/settings">
<help-provider prefix="MAPHELP_">
<help-provider-class>
oracle.adf.view.rich.help.ELHelpProvider
</help-provider-class>
<property>
<property-name>helpSource</property-name>
<value>#{helpTranslationMap.helpMap}</value>
</property>
</help-provider>
</adf-faces-config>
</adf-settings>
As you've pointed out, Review section 19.5.3 for more details -> http://docs.oracle.com/cd/E24382_01/web.1112/e16181/af_message.htm#CHDHIGIA
You could also investigate use the OHW product available here: http://www.oracle.com/technetwork/developer-tools/help/index-083946.html

Modbus - HELP for final exam

Similar Messages

Maybe you are looking for