Modbus Logical Data Member Status Not Logging

I am using several Modbus objects and have setup aliases for all of the Native Members that are being used. For each alias, I checked the "Log to historical database" box. None of the members/aliases that have not been setup as Alarm Conditions (i.e. checking "Generate logical alarm" box) seem to be logging to the database. When I print Alarms and Events ot Event only reports, none of the non alarm events, other than button presses and Edit Mode On/Off events are in the reports. What am I doing wrong?

There are 2 databases. Alarms & Events are logged to Alarm/Event database.
The Modbus objects that you "Log to historical database" are logged as traces and saved in the citadel database. As logical members they will be logged as 1's or 0's. This data can be viewed with Measurement and Automation (MAX) or within Lookout using hypertrend objects.
Regards

Similar Messages

Logical data corrupton in alert log

Thanks for taking my question! I am hoping someone can help me because I am really in a bind. I had some issues restoring my database the other day. I thought I recovered everything but now I am seeing more errors in the alert log and I have no idea how what to do. Any help would be greatly appreciate!!!!!
I listed alert log errors at the end and I am 11g windows 2008 .
My first mistake was stop archive logging while a large job ran to save some time.
After the job completed I restarted the archive logging and then backed up the database and took an scn.
I then recovered back to the scn above and it appeared to go ok excetp I then noticed I had (2) v%database_block_corruptions.
I then decided to recover back several days and restore an the prd schema via an export takien before 1st restor.
I changed the incarniation back 1 and recovered and imported schema back.
I checheck v$database_block_corruption and it as empty. I am thinking ai am good.
I restart several batch jobs which finished ok.
I backup and it is good.
I now have the below logical errors in the alert log. They appeared inbetween the nightly rman backup and export.
Help! What is causing this and how do I fix it?
Kathie
export taken at 9:30
Wed Jul 22 22:00:03 2009
Error backing up file 2, block 47924: logical corruption
Error backing up file 2, block 47925: logical corruption
Error backing up file 2, block 47926: logical corruption
Error backing up file 2, block 47927: logical corruption
Error backing up file 2, block 71194: logical corruption
Error backing up file 2, block 78234: logical corruption
Error backing up file 2, block 78236: logical corruption
Error backing up file 2, block 78237: logical corruption
Error backing up file 2, block 78238: logical corruption
Error backing up file 2, block 78239: logical corruption
Error backing up file 2, block 78353: logical corruption
Error backing up file 2, block 78473: logical corruption
Error backing up file 2, block 79376: logical corruption
Error backing up file 2, block 79377: logical corruption
Error backing up file 2, block 79378: logical corruption
Error backing up file 2, block 81282: logical corruption
Error backing up file 2, block 81297: logical corruption
Error backing up file 2, block 81305: logical corruption
Error backing up file 2, block 81309: logical corruption
Error backing up file 2, block 81313: logical corruption
Error backing up file 2, block 81341: logical corruption
Error backing up file 2, block 81370: logical corruption
Error backing up file 2, block 81396: logical corruption
Error backing up file 2, block 82115: logical corruption
Error backing up file 2, block 82116: logical corruption
Error backing up file 2, block 82117: logical corruption
Error backing up file 2, block 82118: logical corruption
Error backing up file 2, block 82119: logical corruption
Error backing up file 2, block 85892: logical corruption
Error backing up file 2, block 85897: logical corruption
Error backing up file 2, block 85900: logical corruption
Error backing up file 2, block 85901: logical corruption
Error backing up file 2, block 85904: logical corruption
Error backing up file 2, block 85905: logical corruption
Error backing up file 2, block 85906: logical corruption
Error backing up file 2, block 85909: logical corruption
Error backing up file 2, block 85910: logical corruption
Error backing up file 2, block 85913: logical corruption
Error backing up file 2, block 85917: logical corruption
Error backing up file 2, block 85918: logical corruption
Error backing up file 2, block 85925: logical corruption
Error backing up file 2, block 85937: logical corruption
Error backing up file 2, block 85943: logical corruption
Error backing up file 2, block 85944: logical corruption
Error backing up file 2, block 85947: logical corruption
Error backing up file 2, block 85949: logical corruption
Error backing up file 2, block 85951: logical corruption
Error backing up file 2, block 85953: logical corruption
Error backing up file 2, block 85956: logical corruption
Error backing up file 2, block 85958: logical corruption
Error backing up file 2, block 85965: logical corruption
Error backing up file 2, block 85976: logical corruption
Error backing up file 2, block 85977: logical corruption
Error backing up file 2, block 85980: logical corruption
Error backing up file 2, block 85981: logical corruption
Error backing up file 2, block 85988: logical corruption
Error backing up file 2, block 85989: logical corruption
Error backing up file 2, block 85995: logical corruption
Error backing up file 2, block 86001: logical corruption
Error backing up file 2, block 86003: logical corruption
Error backing up file 2, block 86005: logical corruption
Error backing up file 2, block 86012: logical corruption
Error backing up file 2, block 86013: logical corruption
Error backing up file 2, block 86015: logical corruption
Error backing up file 2, block 93961: logical corruption
Error backing up file 2, block 93965: logical corruption
Error backing up file 2, block 93968: logical corruption
Error backing up file 2, block 93971: logical corruption
Error backing up file 2, block 93975: logical corruption
Error backing up file 2, block 93979: logical corruption
Error backing up file 2, block 93983: logical corruption
Error backing up file 2, block 93984: logical corruption
Error backing up file 2, block 93987: logical corruption
Error backing up file 2, block 93988: logical corruption
Error backing up file 2, block 93992: logical corruption
Error backing up file 2, block 93996: logical corruption
Error backing up file 2, block 94008: logical corruption
Error backing up file 2, block 94022: logical corruption
Error backing up file 2, block 94026: logical corruption
Error backing up file 2, block 94027: logical corruption
Error backing up file 2, block 94030: logical corruption
Error backing up file 2, block 94031: logical corruption
Error backing up file 2, block 94034: logical corruption
Error backing up file 2, block 94038: logical corruption
Error backing up file 2, block 94041: logical corruption
Error backing up file 2, block 94042: logical corruption
Error backing up file 2, block 94047: logical corruption
Error backing up file 2, block 94074: logical corruption
Error backing up file 2, block 94077: logical corruption
Error backing up file 2, block 118881: logical corruption
Error backing up file 2, block 118882: logical corruption
Error backing up file 2, block 118883: logical corruption
Error backing up file 2, block 118884: logical corruption
Wed Jul 22 22:00:27 2009
Thread 1 advanced to log sequence 279 (LGWR switch)
Current log# 3 seq# 279 mem# 0: F:\ORACLE\11.1.0\ORADATA\CS90QAP\REDO03.LOG
Current log# 3 seq# 279 mem# 1: E:\ORACLE\11.1.0\ORADATA\CS90QAP\REDO03A.LOG
Wed Jul 22 22:04:29 2009
Thread 1 advanced to log sequence 280 (LGWR switch)
Current log# 4 seq# 280 mem# 0: F:\ORACLE\11.1.0\ORADATA\CS90QAP\REDO04.LOG
Current log# 4 seq# 280 mem# 1: E:\ORACLE\11.1.0\ORADATA\CS90QAP\REDO04A.LOG
Wed Jul 22 22:37:15 2009
ALTER SYSTEM ARCHIVE LOG -this is the nightly backup.
Edited by: user579885 on Jul 23, 2009 7:36 AM

If the index is part of EM why wait? How many EM users can you have? It should just be the DBA's.
Being the object is a PK there could be FK that references it. If there are FK to the PK I would try the alter index rebuild to see if that 1- works and 2- fixes the issue before I resorted to drop/create since the rebuild can be done without having to disable and re-enable the FK.
Also note that under certain conditions such as if the index status is INVALID the alter index rebuild will read the table rather than just read the index for its data.
HTH -- Mark D Powell --

Purpose of Prefix and Suffix in Logical Data Member?

Hi,
What is the purpose of the prefix and suffix fieldin a logical member?
For instance, I have the word "Off" entered in the On field and the word "On" entered in the Off field.
The "Invert Logical Signal" is unchecked. So is this the same as having the "Invert Logical Signal" checked if you enter the words Off and On as above?
Thx.

Hi Zog626;
The prefix and suffix tags perform NO functions on the data member. You could put in the words, "Yippy" and "Skippy" and nothing will happen.
Personally I use them to help remind me what the engineering units is for that particular vartiable. For example, I will put in GPM if it is Gallons Per Minute,
or °F if it is a farenheit temperature.

Update function in logical data source does not get called.

I created a logicial datasource that contains two functions, one read and one update. The test runs and returns the expected values, however the update is not actually updating the database. Any reason this might occur? Thanks.

A common problem with this issue is that the datagraph that the client is sending does not indicate an update. Search for : testing update in ALDSP edocs, somewhere around the third search result there will be a document describing how to test updates - including how to capture datagraphs generated by the Test View. (search is broken at this moment, otherwise I'd give you the link ) Then you can make changes in the Test View, click on "Submit" and you will see the corresponding datagraph to make that change.
At the very least, the datagraph will need an 'old value' in the changeSummary. For instance, the datgraph to change a customers first name from John to Jonathan would look something like ...
<datagraph>
<changeSummary ... >
<FIRST_NAME>John</FIRST_NAME>
</changeSummary>
<CUSTOMER>
<LAST_NAME>Smith</LAST_NAME> 
<FIRST_NAME>Jonathan</FIRST_NAME> 
</CUSTOMER>
</datagraph>

Can not retrieve data source status

I have 3 DPS (6.3) running fine with 3 (6.2) DS downstream, running fine as well, on RHAS 4 U4 .
I don't understand why the DPS console always report it can not retrieve the data sources status. I checked the DS access logs, and I see each DPS
default monitoring request (on the "" DN) every 30 seconds, which returns one entry, and no obvious error in any DPS or DS error log .
Any idea ?

Hi,
it looks like a a known problem to me that may appear in the following situation:
In somes cases, the proxy and the DSCC (console) uses different hostnames: For instance, the proxy may be registered to the admin framework as myhost.sun.com and the proxy itself may use only myhost. Operation status is exposed by the proxy as an LDAP entry with dn cn=myhost,.....,cn=monitor. When there is a naming mismatch, the console search for cn=myhost.sun.com,...., cn=monitor and can't find the entry, so the status is unknown.
Don't know if you are in this situation but it might worth checking this.
Hope this helps
-Sylvain

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

Data Mart Status of the request is not ticked

Hello Everybody,
I am the first time to deal with BW.
After I loaded the data to the ODS, the request in the manage data view was not ticked as the others although the job was completed successfully.
Does anyone can help?
Many Thanks
F-B-I

Hi,
have you deleted the data mart status in ods .
u need to follow these steps
1, if you chenged the status to red no need to delete the datamart status in ods .you can load the data from ods to infocube.
2, if the status green and need to delete the datamart symbol in ods.
regards
sivaraju

Please help if you can, my user ID will not log on and it has all my data in it.

The primary user ID (an admin ID with all the valuable info I need access to) will not log on from a restart or initial power up. I was able to go into another user admin ID once and change its password which got me in once but now no passcodes will work.
The primary admin user will not log on at all. it doesn't give any error messages. It just flashs for a moment and then goes back to the user selection screen. I have the same apple ID on my iphone and can access all iCloud items associated with it. Just the user won't work. Another admin user and guest user work fine.
Before the user crashed we had some internet issues where it wouldn't log onto our shared network at our complex which has about a dozen registered users associated. Some sources have suggested that we were hacked and that security problems have shut down that user. We were in the British Virhin Islands when it happened. We are in the US now and the other user IDs are still working gone and the new Internet source was picked up through wifi without any trouble.
There is is so much info In that user ID that we need access to. I tried to use timemachine through the other admin but it will not reset through it. I have an external HD time machine backed up as of Feb 15 which would get us back most of the data, but I can't seem to reload that info either. Should I wipe out the whole system and start again? Maybe just erase that user? I'm not sure how to even do that...
thanks for for any and all assistance!

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

Status changes in Problem not logged in Text assignment block

Hello,
when processing status changes via actions for example in ChaRM process, the status changes are logged in text assignment block.
But for problem or incident management the status changes are not logged in text assignment block.
How to do this?
Thanks and regards,
Jan

Hello,
sorry, but this is not working, action gets executed (I scheduled it when reaching status) but no update in text log happens.
Any other idea?
Regards

GET Payroll in logical data should be used or not?

Hi All,
Should we be using the GET payroll to fetch the payroll results using the logical database PNP?
As the GET PAYROLL is not supported by the logical data base PNPCE.
I know 2 ways of fetching the payroll data.
1) using the function modules
2) using the GET payroll.
Please suggest the best possible way along with the reasons.
Regards,
Umesh Chaudhari.

Hi All,
any suggestions?
Regards,
Umesh Chaudhari.

WAE Disk Status "Not Up To Date"

After an Upgrade Image to 4.1.3b.9, i got this command output:
NO-HOSTNAME#show disks details
Physical disk information:
disk00: Present WD-WCANY3489733 (h02 c00 i00 l00 - Int DAS-SATA)
238472MB(232.9GB)
disk01: Present WD-WCANY3489714 (h02 c00 i01 l00 - Int DAS-SATA)
238472MB(232.9GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/md0 991MB 912MB 79MB 92%
/swstore internal /dev/md1 991MB 459MB 532MB 46%
/state internal /dev/md2 5951MB 168MB 5783MB 2%
/local/local1 SYSFS /dev/md4 11903MB 130MB 11773MB 1%
.../local1/spool PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 101177MB 128MB 101049MB 0%
/dre1 CONTENT /dev/data1/dre 79354MB 128MB 79226MB 0%
/ackq1 internal /dev/data1/ackq 1189MB 32MB 1157MB 2%
/plz1 internal /dev/data1/plz 2379MB 65MB 2314MB 2%
Software RAID devices:
DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS
/dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD]
/dev/md1 RAID-1 NORMAL OPERATION disk00/01[GOOD] disk01/01[GOOD]
/dev/md2 RAID-1 REBUILDING disk00/02[GOOD] disk01/02[!!NOT U
P TO DATE!!]
/dev/md3 RAID-1 REBUILDING disk00/03[GOOD] disk01/03[!!NOT U
P TO DATE!!]
/dev/md4 RAID-1 REBUILDING disk00/04[GOOD] disk01/04[!!NOT U
P TO DATE!!]
/dev/md5 RAID-1 REBUILDING disk00/05[GOOD] disk01/05[!!NOT U
P TO DATE!!]
*** NOTE ***
One or more RAID constituent disk partitions appear to be abnormal.
This could be because of
problem in drive's partition(s) and it is being rebuilt
Possible I/O errors on a disk drive
Please run "show alarms critical detail support"
to check any critical disk errors.
RAID-1 volumes will continue to operate on the remaining disk drive.
Please refer to the product documentation for further
information on how to handle this situation.
There are not alarms about disks...
I powered-on the appliances almost 20 mins ago... and this still continuous saying that . Is it normal ?
Best Regards,
Bruno PetrÃ³nio

ARGGGGGGGG....
Ensuring a Successful RAID Pair Rebuild
RAID pairs will rebuild on the next reboot after you use the restore factory-default command, replace or add a hard disk drive, delete disk partitions, or reinstall WAAS from the booted recovery CD-ROM.
Caution You must ensure that all RAID pairs are done rebuilding before you reboot your WAE device. If you reboot while the device is rebuilding, you risk corrupting the file system.
To view the status of the drives and check if the RAID pairs are in "NORMAL OPERATION" or in "REBUILDING" status, use the show disk details command in EXEC mode. When you see that RAID is rebuilding, you must let it complete that rebuild process. This rebuild process may take several hours. **

Use member on data form does not work

Hello,
"Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
Who is resolve this problem?
Version hyperion: 11.1.2
Thanks

I don't have a solution for you but more steps to solve the problem
You are ultimately on the right track in some ways but break it down into it's components.
The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
So I would strip this baby down to its bare bones then build it back up.
1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
Is it successful: go to 2
If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
2) Run the calc outside the form but with variables included. Did it prompt you correctly.
Is it successful: go to 3
If it isn't. What is wrong with the variable
3) Now attach it to the form but don't hide the prompts
Still good go to 4
4) hide the prompts and run on save
And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

Quantities/Dates and Status tab in purchase requisition is not working

Help!!! In the Quantities/Dates tab of Purchase Requisition is not updating the Quantity Ordered field if a Scheduling Agreement was created, no matter if have a Delivery Schedule or Goods Receipt, and in the Status tab is not updating the Ordered field.

Ok, but you can create a Scheduling agreement whit reference a PR and the PR show in the Status tab the number of Scheduling agreement created and the total quantity ordered to date, but is not showing the data, and in the Quantities/dates tab of PR __is not showing the Quantity Ordered too_, that is the problem, however that is not happened if you create a PO.

How to compare substitution variable name to static member names (not data)?

Is there a way to write a BSO member formula that compares a substitution variable against the name of a static member (not the data value of the member)
For example, I have a BSO database that has the sub variable &CurrMth (which is set the real current month), and I am trying to use it in the Q1/Q2/Q3/Q4 member formulas
IF(&CurrMnth <> "Jan" AND &CurrMnth <> "Feb")
"Mar";
The intention of the above is: if &CurrMnth is neither Jan nor Feb, then the Mar value will be used. However, the system is actually comparing the values of &CurrMnth and Jan/Feb, rather than the names/text string of "Jan"/"Feb".
I have been looking around the tech references, but I was unable to find any functions that will compare the text strings of member names as they all appear to compare against the data itself.
Please let me know if there are any ways to compare the member names themselves in a member formula, not the data values.
Thanks!

Thanks Celvin, that looks like it works!
However, I do need to do the same function in the equivalent quarter members in our ASO cube as well. Do happen know know if there's a similar MDX function I could use in the ASO cube to acheive the same result? I was using the following to achieve this in ASO (which obviously did not work):
IIF([Time Periods].[Jan] <> &CurrMth AND [Time Periods].[Feb] <> &CurrMth,
[Mar],

"duplicate member names within data preview are not currently supported"

When I clicked "Preview Data" it altered "duplicate member names within data preview are not currently supported".
What's that mean?
And I can not find anywhere to set "duplicate member names" option :(
I'm using EAS 11.1.2

I am very sad to find that "You can change false to true but cannot change true to false".

Modbus Logical Data Member Status Not Logging

Similar Messages

Maybe you are looking for