Modbus Slave Demon - Executable cannot find VI.
I have included in my application Modbus Ethernet Example Slave, which I've altered a bit ( only the inside of While Loop ). Everything is working fine until I've come to using an executable built from my project.
When I start it I got: Error 7 occurred at Open VI Reference in Modbus Init.vi->Main_v0.3.5.vi
Possible reason: LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system.
In my project library I have Modbus Ethernet Example Slave in directory where the .lvproj file is, and the so the "Open VI Refference.vi" gets it from there (path is built using "Application Directrory Constant" + Name of VI).
I've also set "Always include" for MB Eth Example Slave in build properties but I still get the error of not founding the VI.
Do You have any idea why is it happening?
For your example, your exe has to reside in the same folder as the project as well.
Kudos and Accepted as Solution are welcome!
Similar Messages
-
Error when running ethernet modbus slave demon in an executable - reoccurence
Thought I'd solved this with the help of the mass compile function. However, it seems to have come back. Maybe it never went away.
Brief summary - I'm trying to create an exe of the MB Ethernet Slave example.vi in LV 2013. I can create the exe OK but when I run it I get an error 1003 at invoke node. "This VI is broken or contains a sub VI that LabView can't locate. Verify that you can run the VI. VI path C:\Modbus\Source code\Slave demon.vi."
Well I can run the slave demon VI with no problems. I can also run the MB Ethernet Slave example VI with no problem.
In the MB Ethernet slave example VI there is an invoke node that calls the slave demon vi. I've used the slave demon VI path constant as an input to the invoke node so that the exe shouldn't have a problem locating it.
I've also checked out the sub VIs of the slave demon and they all seem to be present in my project. I've also tried a few different build settings - all to no avail. All VIs have been mass compiled under LV 2013.
Maybe the exe is struggling to locate the TCP functions.
Any help would be much appreciated.
Attachments:
MB Ethernet Example Slave.vi 47 KBI have checked the path and double checked by dragging the VI into an empty path constant. I also created a version that uses the file dialog express VI so that I can select the slave demon VI when the program runs. I've also set the slave demon to be always included in the project build. The error message still appears.
By disabling sections of the slave demon vi I found that a VI called Internecine Avoider was linked to the appearance of the invoke node error message. By disabling this VI I could get the invoke node error message to disappear, although the slave demon then didn't work as intended. This VI is included in my project under the vi.lib so it should be found. -
Executable cannot find niscope
In LabView 8.0.1 I can distribute apps that do not access hardware, but if I include VIs to control the digitizer (niscope) it fails on the target machine with Error 3 cant open front panel. Packaging VIs in a support directory makes no difference. VIs are present on target machine and I have no problems with exes on LV 6.1
Hi testlabrlp,
Error 3 generally means that you have tried to open up one of your subvis' front panels without setting the subvi to allow for this. If you look at the following link it should give you some information regarding the problem as well as the solution.
http://digital.ni.com/public.nsf/websearch/8F68715444302CAB86256DDD0071C140?OpenDocument
I hope this helps
Adam B
Applications Engineering Team Leader | National Instruments | UK & Ireland -
Hello,
two of our users get the following error message, when opening two specific reports:
First Report: Cannot find Dimension Scenario.
Second Report: Error executing query: the member null doesn't exist in this application.
Other users can access these reports, and the same users where the problem occurs can access other reports in the same folder.
I set the same rights for me, but i can access the reports without problems.
Somebody encountered the same problem before?Hi there,
I had the same issue a few weeks ago... not sure how it happened but it was related only with my username.
In order to fix it:
1. I created a report which does not require to select the scenario in advance. Try to use the default data-grid that you get when you first create a report for example.
2. When the user runs the report, try to see if he can see the dimension. Do not use the missing dimension on rows or columns. If he can see the dimension, ask him to select one scenario. This will solve the issue.
3. If he cannot see the dimension, try to change the layout of the report.
Regards,
Thanos -
Cannot find stored procedure in Programmability despite being executed successfully
Hi
I have created a Stored Procedure in SQL Server which is parsed and executed successfully but when I check it in Programmabilty-> Stored Procedures I cannot find it. After refreshing the whole database and also restarting SQL Server, the problem is occuring.
Help with a solution.
The Stored Procedure is
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'Issues') AND type in (N'U'))
BEGIN
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'DeleteIssue') AND type in (N'P', N'PC'))
BEGIN
DROP PROCEDURE DeleteIssue
END
EXEC sp_executesql @statement = N'CREATE PROCEDURE DeleteIssue
@issueId INT
AS
BEGIN
DELETE
FROM
Issues
WHERE
IssueId = @issueId
END
END
Thanks and Regards
SarthakMay be you are checking in the wrong database or the conditions to create the SP is not met(Issues
table doesn't not exist in the db). What is the output from this query?
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'Issues') AND type in (N'U'))
BEGIN
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'DeleteIssue') AND type in (N'P', N'PC'))
BEGIN
DROP PROCEDURE DeleteIssue
END
EXEC sp_executesql @statement = N'CREATE PROCEDURE DeleteIssue
@issueId INT
AS
BEGIN
DELETE
FROM
Issues
WHERE
IssueId = @issueId
END
END
ELSE
BEGIN
print'ISSUE doesnt exist'
end
Satheesh
My Blog |
How to ask questions in technical forum -
GGS WARNING 150 Cannot find executable file './server' in the pump r
Hi,
i setup the golden gate freshly.
I'm seeing the below error in the pump rpt files
2012-11-07 06:52:19 GGS WARNING 150 Cannot find executable file './server'.
And in the extract rpt file
2012-11-07 06:11:26 GGS WARNING Z1-078 No valid default archive log destination directory found for thread 1.
2012-11-07 06:11:26 GGS WARNING Z1-078 No valid default archive log destination directory found for thread 2.
2012-11-07 06:11:26 GGS INFO Z0-016 Default thread stack size: 8388608.
2012-11-07 06:11:27 GGS INFO 112 Recovery initialization completed for target file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea000002, at RBA 1360, CSN 94088686.
2012-11-07 06:11:27 GGS INFO Z0-05M Output file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea is using format RELEASE 10.4.
2012-11-07 06:11:27 GGS WARNING Z1-07J Checkpoint marked as from graceful shutdown, but records found after checkpoint in trail /oratempshare/ggate/ehrms_trail/eutcp/ext/ea. Expected EOF Seqno 0, RBA 0. Found Seqno 2, RBA 1360.
2012-11-07 06:11:27 GGS INFO 224 Rolling over remote file /oratempshare/ggate/ehrms_trail/eutcp/ext/ea000002.
Can any one please suggest me where i went wrong in setting up.
Why my ggate showing unable to find the executable. I am able to see the executable server in the ggate home.user13095767 wrote:
i setup the golden gate freshly.
I'm seeing the below error in the pump rpt files
2012-11-07 06:52:19 GGS WARNING 150 Cannot find executable file './server'.
Can any one please suggest me where i went wrong in setting up.
Why my ggate showing unable to find the executable. I am able to see the executable server in the ggate home.In addition to Steve's reply, note that the broken installation may actually be on the target system, not the (local) source system. Unable to find "server" may mean that your source GG installation is unable to send remote trails to the target system, because "server" can't be found on the target. When checking the target gg installation, also be sure you've configured your source system to send to the correct mgr port & correct remote host. You might be sending data to an older (perhaps (partially) uninstalled) version of GG. -
Compile Error: ld: cannot find -lgcc C compiler cannot create execut
I've just get my system change to arch64 from arch32.
When I try to build wine. It shows:
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
make: *** No rule to make target `depend'. Stop.
==> ERROR: Build Failed. Aborting...
and see this part of config.log
gcc: '-V' must come at the start of the command line
configure:2366: $? = 1
configure:2389: checking for C compiler default output file name
configure:2416: gcc -m32 -march=x86-64 -O2 -pipe conftest.c >&5
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
/usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
/usr/bin/ld: cannot find -lgcc
collect2: ld returned 1 exit status
configure:2419: $? = 1
configure:2457: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "Wine"
| #define PACKAGE_TARNAME "wine"
| #define PACKAGE_VERSION "0.9.22"
| #define PACKAGE_STRING "Wine 0.9.22"
| #define PACKAGE_BUGREPORT "[email protected]"
| /* end confdefs.h. */
|
| int
| main ()
| {
I run "ld -lgcc"
[root@sgu wine0922]# ld -lgcc
ld: cannot find -lgcc
When i was building another package, i get this err info:
conftest.cc:14:28: error: ac_nonexistent.h: No such file or directorywine needs a 32bit environment to run/get compiled or a multilib x86_64 system. watch the gcc -m32 call - so no way without touching the pure 64bit philosophy behind arch64!
-
Cannot find java.exe when executing Sun Java Enterprise 8.1
I downloaded and installed Sun Java Enterprise 8.1 (actually because I kept getting not enough space messages I downloaded it in 3 parts). When attempting to execute by clicking on the icon I keep getting a message saying "cannot find java.exe". I previously installed the java runtime successfully. Is anyone familiar with this and if so how do I get around it. I am running Win2k SP4 on a laptop. Thank you for any insight you can provide.
Hi,
I faced same problem. I had jdk 1.5.0_05 installed on C: drive directly. But When I check the log though the installation found the version it was assuming it to be at 'C:\Program Files\Java' so even after finding the installed JDK it was failing. When I copied the JDK at 'C:\Program Files\Java' and then uninstalled and reinstalled the Sun java studio 8 again, at this time it asked me about which JDK to use! Then there I could point to C:\jdk1.5.0_05. Then everything went through fine. I guess this is some problem in installation code. Try this out. -
Labview executable error - system cannot find the file specified
Hi
I am trying to create a stand-alone application and I'm getting the error message below:
"System cannot find the file specified"
This error message occurs when I run the setup.exe. Does any one know why this is happening? I've also attached the error message screenshot.
Thanks
Attachments:
Specified file error.png 34 KBWhat type of hardware are you using? What do you mean by stand alone? Are you using any RIO device? (Just trying to understand)
The best solution is the one you find it by yourself -
Dbms_scheduler - ORA-27301: system cannot find the file specified
Hi,
I'm having problems running an executable job via dbms_scheduler. The invoking code reads:
begin
dbms_scheduler.create_job(job_name => "fred",
job_type => "EXECUTABLE",
job_action => 'convert c:\wowtemp\test.jpg -thumbnail 155 c:\wowtemp\test.png',
enabled => TRUE
dbms_scheduler.run_job(job_name => "fred");
end;and running this in SQL*plus gives me:
ERROR at line 1:
ORA-27370: job slave failed to launch a job of type EXECUTABLE
ORA-27300: OS system dependent operation:accessing execution agent failed with status: 2
ORA-27301: OS failure message: The system cannot find the file specified.
ORA-27302: failure occurred at: sjsec 6a
ORA-27303: additional information: The system cannot find the file specified.
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 7This happens no matter what I put in the job_action, and despite the fact that if I paste the jpb_action into a command prompt window it executes successfully. The user has CREATE ANY JOB privilege.
Any ideas?
BTW, this is using XE on WinXP. (I'd post in the XP forum but it seems to have disappeared).
Thanks,
johnOK, problem #1 solved:
By default, XE on Windows sets up the scheduler service to disabled. Enable and start it, then we can move on to problem #2:
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
See http://www.adp-gmbh.ch/blog/2005/may/27.html for a workaround using a .bat file which sadly doesn't help me. How do I pass runtime switches and parameters?
DBMS_SCHEDULER is wonderfully powerful, but NOWHERE in the copious documentation can I find help on how to do something really SIMPLE.
I just want to run an unscheduled, ad hoc executable job which runs an OS command with parameters, as in:
'c:\mydir\convert.exe c:\mydir\test.jpg -thumbnail 155 c:\mydir\test.png'
Can the job_action parameter include command-line switches and parameters or not?
In the documentation for CREATE_JOB, 'For an executable, the action is the name of the external executable, including the full path name and any command-line arguments.', but this doesn't work for me.
Elsewhere (Error running executable job I read:
If the job_type is executable then the scheduler expects only the executable name and path as job_action (no command line arguments) e.g. ("c:\win32\cmd.exe")
For commandline arguments you should be setting number_of_arguments to the required value and then doing set_job_argument_value for each argument. (e.g. 3, "/q", "/c", "script.bat").
What's the real story?
Any and all assistance much appreciated
Thanks -
Xorg cannot find screens with nvidia module
I know that this question is very common, but I cannot find solution,
I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
Thanks.
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 0 "Screen1" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "Throttle" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "DelayedFlush" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
#Option "TripleBuffer" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Xorg.0.log:
[ 27.732]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 27.732] X Protocol Version 11, Revision 0
[ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 27.732] Build Date: 19 October 2012 03:54:56PM
[ 27.732]
[ 27.732] Current version of pixman: 0.26.2
[ 27.732] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
[ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.732] (==) ServerLayout "X.org Configured"
[ 27.732] (**) |-->Screen "Screen0" (0)
[ 27.732] (**) | |-->Monitor "Monitor0"
[ 27.732] (**) | |-->Device "Card0"
[ 27.732] (**) |-->Input Device "Mouse0"
[ 27.733] (**) |-->Input Device "Keyboard0"
[ 27.733] (==) Automatically adding devices
[ 27.733] (==) Automatically enabling devices
[ 27.733] (==) Automatically adding GPU devices
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.733] (WW) Disabling Mouse0
[ 27.733] (WW) Disabling Keyboard0
[ 27.733] (II) Loader magic: 0x7fcc20
[ 27.733] (II) Module ABI versions:
[ 27.733] X.Org ANSI C Emulation: 0.4
[ 27.733] X.Org Video Driver: 13.0
[ 27.733] X.Org XInput driver : 18.0
[ 27.733] X.Org Server Extension : 7.0
[ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.734] Initializing built-in extension Generic Event Extension
[ 27.734] Initializing built-in extension SHAPE
[ 27.734] Initializing built-in extension MIT-SHM
[ 27.734] Initializing built-in extension XInputExtension
[ 27.734] Initializing built-in extension XTEST
[ 27.734] Initializing built-in extension BIG-REQUESTS
[ 27.734] Initializing built-in extension SYNC
[ 27.734] Initializing built-in extension XKEYBOARD
[ 27.734] Initializing built-in extension XC-MISC
[ 27.734] Initializing built-in extension SECURITY
[ 27.734] Initializing built-in extension XINERAMA
[ 27.734] Initializing built-in extension XFIXES
[ 27.734] Initializing built-in extension RENDER
[ 27.734] Initializing built-in extension RANDR
[ 27.734] Initializing built-in extension COMPOSITE
[ 27.734] Initializing built-in extension DAMAGE
[ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.734] Initializing built-in extension DOUBLE-BUFFER
[ 27.734] Initializing built-in extension RECORD
[ 27.734] Initializing built-in extension DPMS
[ 27.735] Initializing built-in extension X-Resource
[ 27.735] Initializing built-in extension XVideo
[ 27.735] Initializing built-in extension XVideo-MotionCompensation
[ 27.735] Initializing built-in extension XFree86-VidModeExtension
[ 27.735] Initializing built-in extension XFree86-DGA
[ 27.735] Initializing built-in extension XFree86-DRI
[ 27.735] Initializing built-in extension DRI2
[ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 27.735] (II) LoadModule: "glx"
[ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.741] compiled for 4.0.2, module version = 1.0.0
[ 27.741] Module class: X.Org Server Extension
[ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
[ 27.741] Loading extension GLX
[ 27.741] (II) LoadModule: "nvidia"
[ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.742] compiled for 4.0.2, module version = 1.0.0
[ 27.742] Module class: X.Org Video Driver
[ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
[ 27.815] (II) UnloadModule: "nvidia"
[ 27.815] (II) Unloading nvidia
[ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 27.815] (EE) No drivers available.
[ 27.815]
Fatal server error:
[ 27.815] no screens found
[ 27.815] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 27.815] (EE)
dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
[ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
[ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
[ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
[ 0.000000] On node 0 totalpages: 1023564
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
[ 0.000000] Normal zone: 4056 pages used for memmap
[ 0.000000] Normal zone: 255528 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2494.278 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000028] AppArmor: AppArmor disabled by boot time parameter
[ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001662] Mount-cache hash table entries: 256
[ 0.001817] Initializing cgroup subsys cpuacct
[ 0.001818] Initializing cgroup subsys memory
[ 0.001825] Initializing cgroup subsys devices
[ 0.001826] Initializing cgroup subsys freezer
[ 0.001827] Initializing cgroup subsys net_cls
[ 0.001828] Initializing cgroup subsys blkio
[ 0.001850] CPU: Physical Processor ID: 0
[ 0.001850] CPU: Processor Core ID: 0
[ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002211] mce: CPU supports 7 MCE banks
[ 0.002221] CPU0: Thermal monitoring enabled (TM1)
[ 0.002227] using mwait in idle threads.
[ 0.003141] ACPI: Core revision 20120320
[ 0.021624] ftrace: allocating 18032 entries in 71 pages
[ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.166800] ... version: 3
[ 0.166801] ... bit width: 48
[ 0.166802] ... generic registers: 4
[ 0.166803] ... value mask: 0000ffffffffffff
[ 0.166804] ... max period: 000000007fffffff
[ 0.166804] ... fixed-purpose events: 3
[ 0.166805] ... event mask: 000000070000000f
[ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.200098] Booting Node 0, Processors #1 #2 #3
[ 0.266902] Brought up 4 CPUs
[ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
[ 0.269981] devtmpfs: initialized
[ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.271536] NET: Registered protocol family 16
[ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271637] ACPI: bus type pci registered
[ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.277539] PCI: Using configuration type 1 for base access
[ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
[ 0.277666] mtrr: corrected configuration.
[ 0.277952] bio: create slab <bio-0> at 0
[ 0.277994] ACPI: Added _OSI(Module Device)
[ 0.277995] ACPI: Added _OSI(Processor Device)
[ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.279372] ACPI: EC: Look up EC in DSDT
[ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284681] ACPI: Dynamic OEM Table Load:
[ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285275] ACPI: Dynamic OEM Table Load:
[ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.285725] ACPI: Dynamic OEM Table Load:
[ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.286579] ACPI: Interpreter enabled
[ 0.286581] ACPI: (supports S0 S3 S4 S5)
[ 0.286600] ACPI: Using IOAPIC for interrupt routing
[ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.409424] ACPI: No dock devices found.
[ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409682] \_SB_.PCI0:_OSC invalid UUID
[ 0.409683] _OSC request data:1 8 1f
[ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.410117] PCI host bridge to bus 0000:00
[ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
[ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
[ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
[ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
[ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
[ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
[ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
[ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
[ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
[ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
[ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
[ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
[ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
[ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
[ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
[ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
[ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
[ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
[ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
[ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
[ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
[ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
[ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
[ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
[ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
[ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
[ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
[ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
[ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
[ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
[ 0.426744] pci 0000:03:00.0: >supports D1
[ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
[ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.433378] \_SB_.PCI0:_OSC invalid UUID
[ 0.433379] _OSC request data:1 1f 1f
[ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.433416] \_SB_.PCI0:_OSC invalid UUID
[ 0.433417] _OSC request data:1 0 1d
[ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.435952] vgaarb: loaded
[ 0.435953] vgaarb: bridge control possible 0000:01:00.0
[ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
[ 0.435977] PCI: Using ACPI for IRQ routing
[ 0.437526] PCI: pci_cache_line_size set to 64 bytes
[ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[ 0.437671] NetLabel: Initializing
[ 0.437672] NetLabel: domain hash size = 128
[ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.437681] NetLabel: unlabeled traffic allowed by default
[ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.439709] Switching to clocksource hpet
[ 0.443743] pnp: PnP ACPI init
[ 0.443758] ACPI: bus type pnp registered
[ 0.444001] pnp 00:00: >[bus 00-3e]
[ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
[ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
[ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
[ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
[ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
[ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.444099] pnp 00:01: >[dma 4]
[ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
[ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
[ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.444214] pnp 00:04: >[io 0x00f0]
[ 0.444222] pnp 00:04: >[irq 13]
[ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
[ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
[ 0.444248] pnp 00:05: >[io 0x0061]
[ 0.444249] pnp 00:05: >[io 0x0063]
[ 0.444251] pnp 00:05: >[io 0x0065]
[ 0.444252] pnp 00:05: >[io 0x0067]
[ 0.444253] pnp 00:05: >[io 0x0070]
[ 0.444254] pnp 00:05: >[io 0x0080]
[ 0.444255] pnp 00:05: >[io 0x0092]
[ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
[ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
[ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
[ 0.444260] pnp 00:05: >[io 0xffff]
[ 0.444261] pnp 00:05: >[io 0xffff]
[ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
[ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
[ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
[ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
[ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
[ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
[ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
[ 0.444303] system 00:05: >[io 0xffff] has been reserved
[ 0.444305] system 00:05: >[io 0xffff] has been reserved
[ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
[ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
[ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
[ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
[ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
[ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
[ 0.444327] pnp 00:06: >[irq 8]
[ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
[ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
[ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.444394] pnp 00:08: >[io 0x0060]
[ 0.444396] pnp 00:08: >[io 0x0064]
[ 0.444400] pnp 00:08: >[irq 1]
[ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.444460] pnp 00:09: >[irq 12]
[ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
[ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
[ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
[ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
[ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
[ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
[ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
[ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
[ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
[ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
[ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
[ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
[ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
[ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
[ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
[ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
[ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
[ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
[ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.503484] pnp: PnP ACPI: found 12 devices
[ 0.503485] ACPI: ACPI bus type pnp unregistered
[ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
[ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
[ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.509849] NET: Registered protocol family 2
[ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.512123] TCP: reno registered
[ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512215] NET: Registered protocol family 1
[ 0.512227] pci 0000:00:02.0: >Boot video device
[ 0.539686] PCI: CLS 64 bytes, default 64
[ 0.539720] Unpacking initramfs...
[ 0.587463] Freeing initrd memory: 3004k freed
[ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
[ 0.587808] Simple Boot Flag at 0x44 set to 0x1
[ 0.588188] audit: initializing netlink socket (disabled)
[ 0.588201] type=2000 audit(1351239412.473:1): initialized
[ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599469] VFS: Disk quotas dquot_6.5.2
[ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599601] msgmni has been set to 7715
[ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.599785] io scheduler noop registered
[ 0.599786] io scheduler deadline registered
[ 0.599824] io scheduler cfq registered (default)
[ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.600059] vesafb: scrolling: redraw
[ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
[ 0.667429] Console: switching to colour frame buffer device 170x48
[ 0.734140] fb0: VESA VGA frame buffer device
[ 0.734147] intel_idle: does not run on family 6 model 58
[ 0.734170] GHES: HEST is not enabled!
[ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.734579] Linux agpgart interface v0.103
[ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.748663] mousedev: PS/2 mouse device common for all mice
[ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
[ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.748868] cpuidle: using governor ladder
[ 0.748870] cpuidle: using governor menu
[ 0.748966] drop_monitor: Initializing network drop monitor service
[ 0.749023] TCP: cubic registered
[ 0.749094] NET: Registered protocol family 10
[ 0.749220] NET: Registered protocol family 17
[ 0.749227] Key type dns_resolver registered
[ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
[ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.775385] PM: Hibernation image not present or could not be loaded.
[ 0.775393] registered taskstats version 1
[ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
[ 0.776874] Freeing unused kernel memory: 760k freed
[ 0.776957] Write protecting the kernel read-only data: 8192k
[ 0.780137] Freeing unused kernel memory: 1472k freed
[ 0.781606] Freeing unused kernel memory: 608k freed
[ 0.787240] systemd-udevd[47]: starting version 194
[ 0.813888] ACPI: bus type usb registered
[ 0.813910] usbcore: registered new interface driver usbfs
[ 0.813918] usbcore: registered new interface driver hub
[ 0.813955] usbcore: registered new device driver usb
[ 0.815211] SCSI subsystem initialized
[ 0.816356] libata version 3.00 loaded.
[ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
[ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
[ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
[ 0.816791] xHCI xhci_add_endpoint called for root hub
[ 0.816793] xHCI xhci_check_bandwidth called for root hub
[ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.816904] hub 1-0:1.0: >USB hub found
[ 0.816914] hub 1-0:1.0: >4 ports detected
[ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
[ 0.817469] xHCI xhci_add_endpoint called for root hub
[ 0.817471] xHCI xhci_check_bandwidth called for root hub
[ 0.817493] hub 2-0:1.0: >USB hub found
[ 0.817500] hub 2-0:1.0: >4 ports detected
[ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
[ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
[ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[ 0.836049] hub 3-0:1.0: >USB hub found
[ 0.836052] hub 3-0:1.0: >2 ports detected
[ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
[ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
[ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
[ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[ 0.849353] hub 4-0:1.0: >USB hub found
[ 0.849356] hub 4-0:1.0: >2 ports detected
[ 0.849406] ahci 0000:00:1f.2: >version 3.0
[ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
[ 0.849524] ahci: SSS flag set, parallel bus scan disabled
[ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.869649] scsi0 : ahci
[ 0.869722] scsi1 : ahci
[ 0.869780] scsi2 : ahci
[ 0.869834] scsi3 : ahci
[ 0.869889] scsi4 : ahci
[ 0.869943] scsi5 : ahci
[ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
[ 0.870011] ata2: DUMMY
[ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
[ 0.870015] ata4: DUMMY
[ 0.870016] ata5: DUMMY
[ 0.870016] ata6: DUMMY
[ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.244122] ata1.00: configured for UDMA/100
[ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
[ 1.265963] hub 3-1:1.0: >USB hub found
[ 1.266053] hub 3-1:1.0: >6 ports detected
[ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.495531] hub 4-1:1.0: >USB hub found
[ 1.495628] hub 4-1:1.0: >6 ports detected
[ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
[ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.567395] ata3.00: configured for UDMA/100
[ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
[ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.588300] Switching to clocksource tsc
[ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
[ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
[ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
[ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.297029] systemd-udevd[165]: starting version 194
[ 6.879435] ACPI: Requesting acpi_cpufreq
[ 6.901533] Monitor-Mwait will be used to enter C-1 state
[ 6.901538] Monitor-Mwait will be used to enter C-2 state
[ 6.901542] ACPI: acpi_idle registered with cpuidle
[ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[ 7.242428] ACPI: Power Button [PWRB]
[ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
[ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 7.243227] ACPI: Sleep Button [SLPB]
[ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.243282] ACPI: Lid Switch [LID0]
[ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.243314] ACPI: Power Button [PWRF]
[ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
[ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
[ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
[ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
[ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
[ 7.648436] Backport based on linux-stable.git v3.6-rc6
[ 7.648436] compat.git: linux-stable.git
[ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
[ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
[ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
[ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
[ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
[ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
[ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
[ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
[ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
[ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
[ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
[ 7.975824] alx: Atheros Gigabit Network Connection
[ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 8.008080] [drm] Initialized drm 1.1.0 20060810
[ 8.066122] iTCO_vendor_support: vendor-support=0
[ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[ 8.080898] usbcore: registered new interface driver rts5139
[ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
[ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.188460] Linux media interface: v0.10
[ 8.307532] Linux video capture interface: v2.00
[ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
[ 8.339707] usbcore: registered new interface driver uvcvideo
[ 8.339708] USB Video Class driver (1.1.1)
[ 8.477762] Bluetooth: Core ver 2.16
[ 8.477776] NET: Registered protocol family 31
[ 8.477777] Bluetooth: HCI device and connection manager initialized
[ 8.477779] Bluetooth: HCI socket layer initialized
[ 8.477780] Bluetooth: L2CAP socket layer initialized
[ 8.477784] Bluetooth: SCO socket layer initialized
[ 8.491954] usbcore: registered new interface driver btusb
[ 8.639211] hda_codec: CX20590: BIOS auto-probing.
[ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 8.710502] Console: switching to colour dummy device 80x25
[ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
[ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
[ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.744491] [drm] Driver supports precise vblank timestamp query.
[ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 9.132101] nvidia: disagrees about version of symbol module_layout
[ 9.243757] usbcore: registered new interface driver ath3k
[ 9.265032] usb 3-1.3: >USB disconnect, device number 3
[ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
[ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.400084] ath: EEPROM regdomain: 0x65
[ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
[ 9.400087] ath: Country alpha2 being used: 00
[ 9.400088] ath: Regpair used: 0x65
[ 9.421060] fbcon: inteldrmfb (fb0) is primary device
[ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[ 9.487781] Registered led device: ath9k-phy0
[ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
[ 9.552614] kvm: disabled by bios
[ 9.556577] kvm: disabled by bios
[ 9.601270] Console: switching to colour frame buffer device 170x48
[ 9.602975] fb0: inteldrmfb frame buffer device
[ 9.602976] drm: registered panic notifier
[ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.605310] acpi device:38: >registered as cooling_device4
[ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
[ 9.611483] acpi device:44: >registered as cooling_device5
[ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
[ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
[ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.321742] fuse init (API version 7.19)
[ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
I'm sorry for my English.
Last edited by Kot Dymok (2012-10-26 08:29:53)I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
Last edited by Lekensteyn (2012-10-29 14:52:55) -
Error message on my development workstation: The system cannot find the file specified.
Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
Inherits System.Web.UI.Page
Private objOpenFilesreport As OpenFilesReport
Private rptOpenFiles As ReportDocument
Private strLastErrorMessage As String = Nothing
Private errLastException As Exception = Nothing
Dim strFileKey As String
Dim strJurisdictionCode As String
Dim strStaffId As String
Dim strReportId As String
Private Sub ConfigureCrystalReports()
Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
Dim rptopenfiles As New ReportDocument
rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports folder of my project
Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
ConnectionInfo.DatabaseName = my database
ConnectionInfo.UserID = login id of user
ConnectionInfo.Password = user's password
SetDBLogonForReport(ConnectionInfo, rptopenfiles)
CrystalReportViewer1.ReportSource = rptopenfiles
End Sub
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
ConfigureCrystalReports()
End Sub
Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = ConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severinhello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.
-
FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM
I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMSUnless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
ELSE
message(rep_status);
END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
. -
After upgrade to JHS Production: cannot find two standard java Classes
Hi, First: congratulations on the Production release. Great that it is there.
After making several backups, I have upgraded to JHS build 91 Production release (I came from JHS build 78).
1. after upgrade to JHS Production, I tested my application first (so before re-enabling Jheadstart on the ViewController and regenerating pages). The application still worked fine
2. I re-enabled JHeadstart on the VC project
3. I opened my Applictation Definition Files and saved them (I noticed a deprecated property OverwriteUiModel that disappeared after saving)
4. I ran the generator on my three App. Def. Files.
5. I rebuild the whole application
6. I ran the application, the first (Table-style) page comes up fine
7. But when clicking on one of the records in the Table to navigate to the Form page...the Embedded OC4J exits with a fatal error:
Fatal error: Cannot find class java/lang/StackOverflowError
Fatal error: Cannot find class java/lang/NullPointerException
The last part of the log before these fatal errors is as follows:
06/08/11 10:12:47 [1171] Binding param "Bind_IdPerson": 210002
06/08/11 10:12:47 [1172] **** refreshControl() for BindingContainer :PersonsPageDef
06/08/11 10:12:47 [1173] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/08/11 10:12:47 [1174] **** refreshControl() for BindingContainer :PersonsPageDef
06/08/11 10:12:47 [1175] Invoke method Action:999
06/08/11 10:12:47 [1176] DCInvokeMethod:Invoking PersonServiceDataControl.dataProvider.applyBindParams()
10:12:47 DEBUG (JhsApplicationModuleImpl) -Executing applyBindParams for CodeAddrLinkTypes
10:12:47 DEBUG (JhsApplicationModuleImpl) -ViewObject CodeAddrLinkTypes: bind parameter values have not changed, NO Requery performed
06/08/11 10:12:47 [1177] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1178] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result = null
06/08/11 10:12:47 [1179] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1180] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result~cp = [Ljava.lang.Object;@c60
06/08/11 10:12:47 [1181] Invoke method Action:999
06/08/11 10:12:47 [1182] DCInvokeMethod:Invoking PersonServiceDataControl.dataProvider.applyBindParams()
10:12:47 DEBUG (JhsApplicationModuleImpl) -Executing applyBindParams for CodeAddrLinkStatuses
10:12:47 DEBUG (JhsApplicationModuleImpl) -ViewObject CodeAddrLinkStatuses: bind parameter values have not changed, NO Requery performed
06/08/11 10:12:47 [1183] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1184] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result = null
06/08/11 10:12:47 [1185] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1186] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result~cp = [Ljava.lang.Object;@c61
06/08/11 10:12:47 [1187] Invoke method Action:999
06/08/11 10:12:47 [1188] DCInvokeMethod:Invoking PersonServiceDataControl.dataProvider.applyBindParams()
10:12:47 DEBUG (JhsApplicationModuleImpl) -Executing applyBindParams for CodeOrgPersonTypes
10:12:47 DEBUG (JhsApplicationModuleImpl) -ViewObject CodeOrgPersonTypes: bind parameter values have not changed, NO Requery performed
06/08/11 10:12:47 [1189] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1190] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result = null
06/08/11 10:12:47 [1191] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1192] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result~cp = [Ljava.lang.Object;@c62
06/08/11 10:12:47 [1193] Invoke method Action:999
06/08/11 10:12:47 [1194] DCInvokeMethod:Invoking PersonServiceDataControl.dataProvider.applyBindParams()
10:12:47 DEBUG (JhsApplicationModuleImpl) -Executing applyBindParams for CodeDivDataValidationStatuses
10:12:47 DEBUG (JhsApplicationModuleImpl) -ViewObject CodeDivDataValidationStatuses: bind parameter values have not changed, NO Requery performed
06/08/11 10:12:47 [1195] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1196] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result = null
06/08/11 10:12:47 [1197] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1198] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result~cp = [Ljava.lang.Object;@c63
06/08/11 10:12:47 [1199] Invoke method Action:999
06/08/11 10:12:47 [1200] DCInvokeMethod:Invoking PersonServiceDataControl.dataProvider.applyBindParams()
10:12:47 DEBUG (JhsApplicationModuleImpl) -Executing applyBindParams for CodeDivDataDivisionStatuses
10:12:47 DEBUG (JhsApplicationModuleImpl) -ViewObject CodeDivDataDivisionStatuses: bind parameter values have not changed, NO Requery performed
06/08/11 10:12:47 [1201] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:47 [1202] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result = null
06/08/11 10:12:47 [1203] DCUtil, returning:oracle.adf.model.binding.DCDataControl$MethodResultsMap, for methodResults
06/08/11 10:12:48 [1204] putValueInPath :PersonServiceDataControl.methodResults.PersonServiceDataControl_dataProvider_applyBindParams_result~cp = [Ljava.lang.Object;@c64
06/08/11 10:12:48 [1205] *** DCDataControl.sync() called from :DCBindingContainer.refresh
06/08/11 10:12:48 [1206] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1207] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1208] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1209] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1210] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1211] ##### QueryCollection.finl no RowFilter
06/08/11 10:12:48 [1212] No XML file /com/jnj/jacnl/cab/view/pagedefs/person/person.xml for metaobject com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1213] Cannot Load parent Package : com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1214] Business Object Browsing may be unavailable
06/08/11 10:12:48 [1215] Loading from XML file /com/jnj/jacnl/cab/view/pagedefs/person/PersonLovAddressesPageDef.xml
06/08/11 10:12:48 [1216] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1217] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1218] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1219] Executing and syncing on IteratorBinding.refresh from :AddrLinkTypeIterator
06/08/11 10:12:48 [1220] Resolving VO:CodeAddrLinkTypes for iterator binding:AddrLinkTypeIterator
06/08/11 10:12:48 [1221] No XML file /com/jnj/jacnl/cab/view/pagedefs/person/person.xml for metaobject com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1222] Cannot Load parent Package : com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1223] Business Object Browsing may be unavailable
06/08/11 10:12:48 [1224] Loading from XML file /com/jnj/jacnl/cab/view/pagedefs/person/PersonLovPersonAddrOrganizationsPageDef.xml
06/08/11 10:12:48 [1225] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1226] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1227] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1228] Executing and syncing on IteratorBinding.refresh from :AddrLinkStatusIterator
06/08/11 10:12:48 [1229] Resolving VO:CodeAddrLinkStatuses for iterator binding:AddrLinkStatusIterator
06/08/11 10:12:48 [1230] No XML file /com/jnj/jacnl/cab/view/pagedefs/person/person.xml for metaobject com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1231] Cannot Load parent Package : com.jnj.jacnl.cab.view.pagedefs.person.person
06/08/11 10:12:48 [1232] Business Object Browsing may be unavailable
06/08/11 10:12:48 [1233] Loading from XML file /com/jnj/jacnl/cab/view/pagedefs/person/PersonLovOrganizationsPageDef.xml
06/08/11 10:12:48 [1234] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1235] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:48 [1236] DCUtil, returning:oracle.jbo.uicli.binding.JUApplication, for PersonServiceDataControl
06/08/11 10:12:49 [1237] Executing and syncing on IteratorBinding.refresh from :OrgPersonTypeIterator
06/08/11 10:12:49 [1238] Resolving VO:CodeOrgPersonTypes for iterator binding:OrgPersonTypeIterator
Fatal error: Cannot find class java/lang/StackOverflowError
Fatal error: Cannot find class java/lang/NullPointerException
Process exited with exit code -1.
Any idea why this might have happened, just because I upgrade to JHS production release?
I am reverting to build 78 again to continue developing, but hope to be able to get working with the prod release soon, but I lack knowledge to determine where the error occurs...
ToineSandra,
I have the (ugly) feeling that I am facing the problem mentioned in http://forums.oracle.com/forums/thread.jspa?messageID=1211326? : it looks like when a JSPX page gets too complex, the Embedded OC4J raises this StackOverFlow class notfound error :-(. Probably the (it only hits me when navigating to the most complex page) generated page generated with build 78 was fine, but the generated page after build 91 has become too complex, allthough nothing changed in between. What I can see from the difference between the before and after build 91 situation for all pages, is that you have added the <id=...> arguments to all ADF elements, like [id="PersonsSaveButton"] in:
<af:commandButton actionListener="#{bindings.Commit.execute}"
action="Commit"
textAndAccessKey="#{nls['SAVE_BUTTON_LABEL_PERSONS']}"
id="PersonsSaveButton">
<af:resetActionListener/>
</af:commandButton>In build78 these were not there. As far as I can see another difference after generating with build 91 is a new element in the page:
<af:panelGroup rendered="#{(bindings.PersonsIterator.currentRowIndexInRange!=-1 and bindings.PersonsIterator.findMode!='true')}">I have not seen a proper solution for this on the JDeveloper forum. I noticed people asking if there is a kind of 'maximum' on how complex a page can get before this error situation happens. No answer on that found (you do not want to know there is a maximum anyway).
The specific page is a master with 5 stacked detail regions and three "use as LOV" groups. Further on about 30 domains are used...
And the page has not finished yet, it will get more "complex" that this. I hope someone knows a good solution so that I can continue to use the Embedded OC4J for testing, otherwise developing wil get very time consuming if I have to deploy to AS every time...something I cannot afford since the project deadline is getting nearer and nearer.
Toine -
ORA -18808;Cannot find OUTLN schema using Database Link
Hi,
I have to access a database using a database link. When I try to do so I get the message:
ORA -18808:cannot find OUTLN schema
The OUTLN schema really does'nt exist at the target database, but I don't get the message when connecting with the same user outside the database link.
I am trying to avoid to ask them to recreate the schema, since I am the only one that needs the database link working.
Is there any way I can access the database with the database link without messing with the target database?
Thanks in advance for any help.The error number returned by that error does not seem to be correct. Below is the correct error number:
ORA-18008 cannot find OUTLN schema
Cause: The database creation script that creates this schema must not have been executed.
Action: Review the log files to see what happened when the database was created.
How is the DB link defined to connect as?
Maybe you are looking for
-
How do i transfer music from ipod to itunes library?
how do i transfer muusic from ipod to itunes library
-
Issue in maintaining Long Text in Message Class
Hi For Note implementation 1413492, I have to maintain long text, when I click on Long Text , I get a pop-up Create Modification , with 2 options for Template Type (1) Original Text (2) Template (With Headers) Can anyone let me know how to proceed fu
-
Aperture 3 and iPhoto slideshows
Still looking for someone who can tell me whether they've been a able to transfer their slideshows from iPhoto (08/09) to Aperture. Jay
-
Blocking of deleted materials in SO creation
Hi everyone. Please teach me how to block deleted materials in SO creation. Currently, when a deleted material is encoded an information message is displayed "Material # is marked for deletion". SO is still created. How can I make it an error mes
-
Hi All, My physical standby - Oracle 11gr2 on RHEL5.6 I want to run RDA on the physical standby, should I run in open read-only mode ?