Modded BIOS for GX660

Hi Svet.
My name is Marco
I wanted to know if you can let me have the last version of the modded BIOS for MSI GX660.
The current BIOS of my notebook is E16F1IMS VER1.0H.
If available, proceed with the donation.
thanks
Marco

Quote from: supermightyz on 13-February-12, 00:40:10
Thanks for the quick response!
I am interested to set the ram to 1333 and increase the percentage of overclocking turbo mode.
If possible also to set the fan speed.
thanks
Quote
I am interested to set the ram to 1333 and increase the percentage of overclocking turbo mode.
ok
Quote
If possible also to set the fan speed.
thermal settings also OK, but can't gurantee that they will work as FAN job its down to EC

Similar Messages

Any modded BIOS for Neo4-F MS-7125 (PCB 1.0)........???

Guys I was wondering if there is any modded BIOS for my Neo4-F (MS-7125) I have. I read somwhere that there is, probably the ,Murdoch modded BIOS....so if anyone can help me with the address.....Thanks a lot...

Thanks for the feeback
I did what the folks at MSI put in their BIOS Flashing instructions. I used the live update as stated and didn't get the desired result. I can't afford to have my PC down while I spend weeks chasing down obscure instructions that should have been included in the Flash Bios install procedure.
How would one know what to do to perform this miracle Bios Flashing? Can you explain what the /py /sn /wb /cd /cc /ld /e switches are for? Also, why would one clear the cmos or have to ""Load Optimized Defaults"" when no hardware or cmos settings have been changed? Also, what method are you suggesting with the command line awfl859g w7125nms.1d ???
Inquiring minds want to know.
Again thanks for the info.

Modded bios for K8N Neo-54G Platinum

Hi,
i've noticed that there are some modded bios versions available for the K8N (i.e. at syar2003's collection). My question is now whats the difference between them and the MSI versions (especially between the latest 1.56 versions)?
Edit: Has anyone allready used the modded bios 1.56 and has he got any performance boost?

Hehe , don't consider yourself a retard for this .
MSI's naming of theese boards is pretty simular and can cause theese
kinds of confusions .You are not the first one .
Anyway it was good you got the mishap resolved so quick
and got up and running again.
Look for radical_53 's post he has made a "Neo2" bios with nvraid ide rom bios 4.66 . Send him a message and he will email it to you ,i'm sure.
Vdimm voltage is not coming any higher i think , either for Neo1 or Neo2 .
Guess it has to do with board design , selection of regulator IC , and
the fact that msi runs mem from the 3.3v line (some voltage level will always be missed due to the components and regulation)
If you want really high vdimm there is just one way and that is hardmodding
the motherboard and that can be a risky affair bothe for board/mem and cpu
if things go wrong.
Other alternative is another mobo .
DFI's s754 takes vdimm from +5v and there is a modded bios that gives upto 4v for memory. They have a s939 board ready thats being betatested , but it's not released yet.
MSI K8N boards have pretty desent max vdimm compared to many others .
This is what i have found on some others :
Gigabyte max VDIMM 2.7v
MSI K8N Neo2 VDIMM 2.85v
DFI Lanparty UT VDIMM 4.0v (s754 with modded bios)
Asus K8N VDIMM 2.8v (some PCB's max 2.7v)
Epox VDIMM 2.8v
Chaintech VDIMM 2.9v

New Modded BIOS for K7N2 Delta ILSR

MSI K7N2 Delta ILSR Modded BIOS based on Official v. 7.80 BIOS
download here:

Description: Access through interface which is on insecure interfaces list detected. Request aborted.
Interface/Client IP address:
Date: Wed, 18 May 2005 13:11:17 GMT
Doesn't work for me
By the way did u put the bios to vork with 1.3 vcore like the braziliantech one that does't exist anymore ?
EDIT: Thanks it's working now

MSI GE70 2OE modded bios for OC ?

Hey,
i bought this notebook a few weeks ago and i was wondering if i could do some overclocking in bios. But no, bios settings are hidden. VGA GTX765 can be overclocked through Asus GPU tweak in windows, that's ok. But i dont know how to boost up CPU.
Is it possible or is there any way how to "mode" bios from this notebook ? I dont know how to do it, so im just asking where to find something like this ... thank you...

Just a little heads up, your GPU is throttling and shuts itself down to "safe-mode" which is 405 MHZ. The clock will often lock itself in that place.
If you want to overclock the gpu, run unigine heaven benchmark in the background and tweak the core first, then the memory, and then combine them. Check for signs of instability, artifacts etc. Your computer will probably shut down the gpu if you encounter any troubles. Raise the bar by 10-20 MHZ each time. Wait 20 seconds, and repeat. When you hit an artifact, turn down 20 MHZ or so and test stability for some minutes. Rinse and repeat for memory.
My problem with ocíng is that when I increase the voltage by... 300mV, my GPU jsut shuts down to safe mode. And it is not exceeding the gpu voltage by manufacturer! Try to OC as much as you can without changing the voltage. And if you change the voltage, maybe only do + 10mV or so.

Mod bios for X340 Celeron 723

Hi, is possible to have a mod bios to use a SETFSB and speedup the Celeron 723 on X340 ?

nope

Mod BIOS for GE70-2OE

Hello, I've donated ( transaction number 9BK823156D8108841 )
I need a custom bios for GE70 2OE, my goal is install hackintosh ( unlock MSR and disable nvidia card )
Dump from MSIHQ:
MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in 20/03/2015 at 22:41:39,94
Mainboard: MS-1757
PCB Version: REV:0.B
BIOS Version: E1757IMS.511
BIOS Date: 27/08/2013
EC-FW Version:
Thanks

received it will work on it and send back to you when its done after 3-4 hours
check PM what to do and what to prepare until waiting
Quote
I need a custom bios for GE70 2OE, my goal is install hackintosh ( unlock MSR and disable nvidia card )
you are at your own in this
i can help you only to unlock your bios

[Request] MSI GT70 - Modded BIOS for VT-x

Hello any help here to mod my BIOS so i can enable VT-x?

you no need to run flash.bat, it's not designed to be run within windows.
Again:
Quote from: Svet on 11-February-13, 02:55:21
There is instructions on the msi web site:
For Windows 7 / VISTA / XP:
a. 1) To know about how to update BIOS Firmware under DOS mode, please click here:
http://www.msi.com/files/pdf/How_to_make_a_bootable_flash_disk_and_to_flash_BIOS_f.pdf
2) Please execute "flash.bat" file after unpack the compressed file for upgrade BIOS Firmware.
Or >>Use the MSI HQ Forum USB flasher<< to do everything automatically and more easy.
Use mode1 when main menu appear then point to E1762IMS.10R.zip
then choose your USB key drive and wait tool to finish with USB key preparation.
when its done reboot NB and boot from USB [press F11, then choose your USB key from the list]
when menu appears, choose option 2:
1. Memtest
2. Proceed with update
3. Flash back to old bios
When asked to Run Memtest, answer with "N", then update will start.
And the end you will be asked for reboot, where you can answer with "Y"

Request: Mod Bios for EX62x for an engineering sample T9500

Hello,
i get a Core2Duo T9500 ES CPU for a very low price The CPU works great in my EX623 (mod. 1.0V Bios) but temp are not so good. All tools show only -21°C, everest show mind. 64°C and the FAN go not under 50 %, this makes me crasy I think, the CPU is a pre-sample, because the most tools can´t show me the revision. only everest show "stepping A1".
when anyone here mod the bios, i need the FN+Strg swap again

sorry, but my edit button is lost... :D
I have one replenishment. Where i build in the CPU, i have also upgrade my GPU. Now have my EX623 the HD4670 with 512MB GDDR3 vram from a GX623 build in. But i think, this is not the reason for the loud fan, because the EX625 have the same bios & gpu. After the GPU change, my BIOS, everest and all other tools detect the motherboard as EX625:
Motherboard ID 64-10V-0000010-00101111-110409-Cantiga$A1674010_EX625, BIOS VERSION: A1674IMS VER1.0V
Motherboard Name MSI MegaBook EX620/EX623/EX625/EX627 (MS-1674)
When you need, i have the cpuinfo.txt from Rightmark
http://www.loaditup.de/files/508828.txt
and here, a lot of cpu informations from sisoft sandra (german version)
http://www.loaditup.de/files/508835.txt

MOVED: Any modded BIOS for Neo4-F MS-7125 (PCB 1.0)........???

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=100654.0

Thanks for the feeback
I did what the folks at MSI put in their BIOS Flashing instructions. I used the live update as stated and didn't get the desired result. I can't afford to have my PC down while I spend weeks chasing down obscure instructions that should have been included in the Flash Bios install procedure.
How would one know what to do to perform this miracle Bios Flashing? Can you explain what the /py /sn /wb /cd /cc /ld /e switches are for? Also, why would one clear the cmos or have to ""Load Optimized Defaults"" when no hardware or cmos settings have been changed? Also, what method are you suggesting with the command line awfl859g w7125nms.1d ???
Inquiring minds want to know.
Again thanks for the info.

Re: GX640 modded BIOS for a SanDisk Ultra II SSD in AHCI

Hello
QuoteHi, there!
I'm having problems with a new SanDisk Ultra II SSD and my GX640.
It's not recognized by the BIOS in AHCI mode, but it is in IDE.
Is it possible to mod the bios (1656.10F) to make this work?
I'll donate once you confirm that th...

Quote from: flobelix on Today at 16:46:01MSi's manufacturer warranty (not the same as the warranty the seller provides) starts with the date of manufacturing. You can can checkout looking at your S/N: [url=http://...

GX640 modded BIOS for Agility 4 SSD in AHCI

So...I'm having problems with a new Agility 4 SSD and my GX640.
It's not recognized by the BIOS in AHCI mode, but it is in IDE.
Is it possible to mod the bios (1656.10F) to make this work?
Also, is it possible to flash back to stock BIOS if necessary?
I'll donate once you confirm that this is possible.
Thanks--
Greg

Yes its possible.
Quote
Also, is it possible to flash back to stock BIOS if necessary?
Yep

Modded BIOS for MS-1722 ID1 (barebones) to remap Turbo to P1?

As the topic states - if FN and Ctrl can be reversed, can Turbo and P1 be reversed to support Turbo mode on the MS-1722 ID1 (since it doesn't have touch sensor bar)?

Nop, since they use different own EC versions where "Turbo" doesn't exist.

Requesting modded bios for GT70 ONC Non Raid

I'd like one. Someone send me through pm.

what can of mod you need?
also the work can be done[if the requested stuffs are possible] after donation:
https://forum-en.msi.com/index.php?topic=134259.0

Mod bios for u100...

here is the link to the https://forum-en.msi.com/index.php?topic=121232.msg984838#msg984838
but I donÄt see any downloadlink.
Quote
Based on official 10E
Contain all changes from latest one R9 and R10
Version A - Standard Fn and LCTRL
Version B - Reversed Fn and LCTRL
Tested OK.
USE AT OWN RISK!!!

Svet only sent them out after a donation.
See link: https://forum-en.msi.com/index.php?topic=134259.0

Modded BIOS for GX660

Similar Messages

Maybe you are looking for