Mode dial not working fully

Hello,
My brand new Canon 700D arrived today and all is well apart from one thing. The mode dial does not fully work. Whenever I go to select, for example, Scene Intelligent Auto (A+) on the mode dial itself, on the screen the Sports option enables itself instead of Scene Intelligent Auto. The other way round is the same. When I go to select the Sports option on the mode dial, the Scene Intelligent Auto comes up. This goes for every option. Whatever I want to select, the opposite of that option on the speed dial enables. More examples include: I want SCN but Flash off comes on. I want Flash off but SCN comes up.
This is a brand new camera which I unboxed today. Surely, this sort of thing should not be happening? Any solutions?
Thanks,
Alan

Just a thought - the active option is selected by lining it up with the white line on the prism housing. Sounds like you are lining it up with the ON position.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

Hibernate mapping editor not working fully

My hibernate mapping editor is not working fully. I can manually enter a new property into the xml and the design pane will update but if I try to add a new property in the design pane it only adds "<property/>" without the attributes specified.
I looked at my workshop log and I did find the following exception:
BEGIN EXCEPTION-
!ENTRY org.eclipse.ui 4 0 2007-03-13 09:08:37.939
!MESSAGE Failed to execute runnable (java.lang.NullPointerException)
!STACK 0
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NullPointerException)
     at org.eclipse.swt.SWT.error(SWT.java:3374)
     at org.eclipse.swt.SWT.error(SWT.java:3297)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:126)
     at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3325)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2971)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1914)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1878)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:419)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
     at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:95)
     at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:78)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:92)
     at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:68)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:400)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:177)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.core.launcher.Main.invokeFramework(Main.java:336)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:280)
     at org.eclipse.core.launcher.Main.run(Main.java:977)
     at org.eclipse.core.launcher.Main.eclipse_main(Main.java:952)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.m7.installer.util.NitroxMain$1.run(NitroxMain.java:36)
     at java.awt.event.InvocationEvent.dispatch(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: java.lang.NullPointerException
     at com.m7.wide.doceditor.XmlTagCommander$_A.actionPerformed(Unknown Source)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.AbstractButton.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$_A.A(Unknown Source)
     at com.m7.wide.eclipse.jstudio.Plugin$4.run(Unknown Source)
     at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
     at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:123)
     ... 32 more
---END EXCEPTION---
Any ideas on how to fix this?
Thanks,
Avi.

Yes, there is a known issue using the latest update of 1.4.2 or 1.5.0 vm.
Generally, Workshop should work fine with 1.4.2 or 1.5.0 series. You can find the supported platform info at
http://edocs.bea.com/workshop/docs92/supportedplatforms33.html
FYI:
http://forums.bea.com/bea/thread.jspa?threadID=400001144&tstart=15&mod=1169490304818
http://forums.bea.com/bea/thread.jspa?threadID=400001987&tstart=0&mod=1172533558688

I have a mac which plays the boot sound but the screen stays black. Recovery mode does not work, as the keyboard is wireless. What do I do?

What it says in the title.
I have an older mac and it worked perfectly until about an hour ago when I shut it down because we needed the room dark for a presentation and the screen saver was putting out light.
Now it won't turn back on. It plays the start up music but the screen stays blank.
The CMD+OPT+R for recovery mode doesn't do anything, the keyboard is wireless so the command doesn't get to the computer and that's the only keyboard I have since that's the one it came with.
I'm looking at making a USB recovery disk but it says that I should click on "Options" in the Disk Utility but there is no options button or menu to click.
From here: OS X: About Recovery Disk Assistant in step 3 I get stuck.
Also it says that if I make a drive on this computer which has an older OS it might not work on the broken machine with Mavericks.
This machine literally worked and I turned it off and now it does not work and there seems to be nothing I can do... ***...

kodemage wrote:
well, then recovery mode does not work. I've tried all the key combinations I've seen on line. Command+R, Command+Option+R, Command+Option+P+R, none of these work.
I don't believe there is anything we can do on a forum to help then, you need to take it into a AASP and have it professionaly diagnosed. If you don't know how to locate an AASP in your area you can begin by using Contact Apple for support and service
Good luck.

Wmii newbie: mod-p and mod-a not working, and keyboard layout change

like topic says... i have issues with mod-p and mod-a not working (they dont' display anything at all...)
also: how do i change the keyboard layout in wmii?
sorry for asking all of this, but was just trying to run wmii in hum, i guess 1 hour? i really do like it, but i cannot find any help nor hint on the official page or the man page...

this is my actual wmiirc_local
MODKEY=Mod4
EXPORT WMII_FOCUSCOLORS=('#ff7700' '#111111' '#ff7700')
EXPORT WMII_BACKGROUND='#333333'
EXPORT WMII_NORMCOLORS=('#000000' '#ffffff' '#666666')
EXPORT WMII_FONT='-*-*-*-*-*-*-12-*-*-*-*-*-*-*'
EXPORT WMII_TERM="terminal"
EXPORT status() {
echo -n ' Eth0:' $(iwconfig eth0 | sed 's/ /\n/g' | grep Quality) '|' $(acpi -b | sed 's/.*, \{0,2\}$[0-9]\{1,3\}%$,.*/Bat: \1 | /') ' Core MHz:' $(cat /proc/cpuinfo | grep 'cpu MHz' | sed 's/.*: //g; s/\..*//g;') '|' $(uptime |sed 's/.*://; s/,//g') '|' $(date)
and it's still not working, except for modkey. when i was using wmii instead of wmii-hg, this file worked fine... sigh
Last edited by samuele.mattiuzzo (2010-01-21 11:21:53)

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Photoshop: full screen mode shortcut not working

photoshop: full screen mode shortcut not working, if i press shirt+alt+ctr key then i delete the file, what happen ?

Could you elaborate?
F is the default shorcut for »Change Screen Mode« for me, so I’m not sure what you want with the qualifier keys.
Have you changed your Edit > Keyboard Shortcut?

TS2529 my iphone is recovery mode and not working what to do?

my iphone is recovery mode and not working what to do?

plz help me to get this problem repair

HT1766 my ipod is disabled, and the recovery mode is not working. what should i do?

my ipod is disabled, and the recovery mode isn't working. what should I do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. Try more than once. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Try another cable
Try on another computer

HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Hello

I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Satellite C850D-115 / Win7 - the special funktion key mode ist not working

Hi,
the special funktion key mode ist not working, although I tried everything in Bios and softare " Toshiba Hardware setup utility".
I still need to press "FN + " to use the special function keys, while enabled bios mode!
The special function mode was never working, I have no more ideas. You...?

As far as I know its no matter what system you are using. The special function key mode should work with Win 7 and Win 8.
Here an Toshiba documentation.
[How to change the Function Keys Mode|http://aps2.toshiba-tro.de/kb0/HTD2503B90001R01.htm]
You bought this notebook without an preinstalled system. Right?
And you installed an clean Win 7 on this Satellite C850D-115?
Please ensure that all available drivers for C850D PSC9UE are installed. This includes the VAP (value added package), Hardware Setup, and others
There is also new BIOS update v6.50-WIN
Be sure your BIOS is up to date!

4.3 Update - Car Stereo Issue, voice dialing not working with Bluetooth

I've seen some similar issues reported, but they were for specific cars/stereos, and the symptoms were different, so I'm posting about mine:
Phone: Samsung Galaxy SIII, Android 4.3.
Car Stereo: Pioneer AVH-X2500BT
This is a stereo I bought and installed myself. All of its features worked fine, and I was enjoying making calls using voice dialing via the stereo. Then, I installed the 4.3 update to the Galaxy SIII. Ever since (literally, I made a call that day before installing it, and tried shortly after), I cannot use the voice dialing feature. Any attempt to use voice dialing or voice commands via the car stereo will fail. Here's what happens:
I do a long press on the car stereo's Home button to initiate voice dialing. On my phone, S-Voice starts up, and a Toast (little message) pops up briefly that says "Check in-car audio". When I talk, the little animation on the microphone button in S-Voice does not happen, meaning it's not hearing anything. The car stereo shortly cancels out of voice dialing mode, as though it timed out, or something.
I've tried switching to Google voice, but the same thing happens. I've tried all kinds of configuration on both devices. I've unpaired and re-paired. Nothing.
Also, turn-by turn directions from Google Maps appears to not work. The app thinks it's giving them, and when I turn the car off, the voice suddenly works from the phone, but it just won't come out the stereo.
All other features work fine, including Pandora, and streaming Bluetooth audio. I can even make phone calls, by accessing the contacts and recent call list from the car stereo. The calls work and come through the stereo fine. Literally voice dialing and Google Maps are all that doesn't work.
Does anyone know how to fix this?

There could be any number of factors that may be affecting this, byounie. It may be that the firmware on your car stereo headunit may need to be updated. My direct recommendation to check first would be to access your bluetooth submenu, and next to paired info for the Pioneer AVH-X2500BT, you should see a little cog wheel/settings icon. Please select this, and start unselecting everything available there. Work your way up, and enable and test these different settings one by one, to see if there is a conflict between Google Maps and Voice dialing services. Let us know what happens, byounie.
NicandroN_VZW
Follow us on twitter @VZWSupport

Digital ICE epson scan (professional mode) does not work

Hello,
I am running the latest Mountian Lion OS on my IMAC and have recently started running some test scans with my Epson Perfection V700 scanner. The supplied Epson software , Epson Scan offers a variety of operating modes, "professional mode" offering the most features. Professional mode offers Digital ICE as an option, however when selected, the Digital ICE does not work.I have compared scans with and without digital ICE and they are exactly the same. Scratches and dirt are not removed by the scan.
If I select a more basic mode ("Home Mode") Digital ICE does work. But this other mode does not offer the range of options offered in porfessional mode.
Has anyone out there used Epson Scan software? Has anyone else experienced this problem? Is there other scanning software out there which could fully exploit the features of the Epson scanner I have? I tried Vuescn and it does not seem to be compatible with my scanner, so that is off the table.
Dean

You should first read the user manual that came w/your scanner and/or contact Epson tech support.
How is the scanner connected to your iMac? USB cable? Wireless? Firewire?
Has anyone out there used Epson Scan software?
I have an Epson scanner. It only work when it's connected directly to my iMac via USB cable.
Has anyone else experienced this problem?
Initially.
Is there other scanning software out there which could fully exploit the features of the Epson scanner I have?
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print/scan
Sometimes, installing the GIMP drivers help with printing/scanning issues: http://gimp-print.sourceforge.net/MacOSX.php

Voice dial not working after upgrading to iOS 5

After I upgraded my iPhone 4's operating system to iOS 5, voice dial is not working any more. When I press and hold the home button, voice control is enabled but only music-realted features (such as play, pause, etc) and "what time it is" work. The "dial XXX" and "call NAME" option don't work any more, and in the blue screen that is shown for voice control, I don't see the word "dial" appearing any more.
My friend who has iPhone 3GS upgraded and she doesn't have this problem.
Do I have this problem because I made a mistake during upgrade?
Is there some place where you can specifically disable/enable voice dial?
Or, is it Apple who disabled this feature, to temp iPhone 4 users to upgrade to iPhone 4S to have that feature back?

No, because I don't even know how to do that. I just restored the phone to one of the previous backups I had, using iTunes. The OS was unchanged (iOS 5) but the functionality was restored.
In this process, I lost all my applications, but my notes, contacts, etc were untouched (see below). As for apps, all I had to do was to look at the list of my apps in iTunes, and reinstall them.
If you want to do the same thing, note that you may lose your contacts or notes if you simply restore an old backup. Before you do so, enable iCloud and make sure your contacts and notes (and other important things) are backed up in iCloud. Then, after restoring your phone, enable iCloud again and it will fetch all the contacts, notes, etc that you might have added after that backup you just restored.

Fold/Unfold (Outline) in BO 4.0 Webi Report - in Reading Mode do not work

I have BO 4.0 Webi report with fold/unfold functionality(Outline). It works fine when I open it in Design mode but do not work in Reading mode. Could anyone please advise if they have faced such issue?
Thanks in Advance.
Regards,
Anita

Hi All,
I checked with the BO authorization team who grant access to different user groups to access BO reports. It means that I was not having the access rights to view my report in "Rich Internet Application" mode. Once the access permissions were granted to my user group. I see the option as highlighted in red below. To view the report in reading mode in BO 4.0 BI Launchpad, you should set the preferences as below:
Thanks for your support.
Regards,
Anita

Elements 12 on Windows 7 Pro 64 Bit - Quick and Guided Modes do not work?

I have tried to upload the software many times with no help. I also have Elements 11 on the same computer and it works very well. I do not understand why 12 will not work. Since I first installed 12 I have been using it in the Expert mode which seems to work. I have triled all of the suggestions found with no help.

Hi,
Please try the below steps:
Right click on the PSE icon.
Select the option Run as admin.
open the editor .
Check is it working fine now.
Also, try to reset the preferences of editor, refer the below link to do so.
http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Mode dial not working fully

Similar Messages

Maybe you are looking for