"mode mode Nokia" in display

I uploadet my software on a E51 an during this prosess the "nokia software uploader" reported an error. This resulted in I lost contact with my phone. I tryed to follow the user tips on the Nokia homepage to see if I was abled to resetting my phone. The only thing that is displayed is "mode mode Nokia". Is there any way for me to bring back the phone or is this a job for a Nokia service shop?
regards
Stian

@sid05: Hi, Stian123 visited these boards last time in 2008. I think it's highly unlikely that he will show up again under that user name. However, if the phone won't come back on it has to be taken to a Nokia care point. As Stian123 had to do - see the post above yours. They should be able to fix that pretty quick.
What you can do is to read psychomanias post in the pool of knowledge and see if there's anything there that can bring your phone back to life, but it depends on where it was in the process when things failed. Check this out: /t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
If not, you will have to visit a NCP. The post I linked to above has all information needed.

Similar Messages

CM Repository created in fsdb mode does not displaying in KM Content

Dear KMC friends
CM Repository created in fsdb mode does not displaying in KM Content.
Any extra confiugration i need to do?
plz reply me
kantha

https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/284
Message was edited by:
Hadar Morchi

Modes are not displaying

Hi
Iam New in SAP xMII. I created newly one Query Templates using TAGQuery. When i select the Data Source, it will shows the Servers details like Simulator(Simulation Server) in the server column but in the Modes column only iam getting "No Data Avilable", the default modes are not displaying in the modes column.
What is the problem actually i did ? How can i get the default modes ?
Can i have create new modes in these servers (Simulator, SQL , Aggregate, Alaram) ?
Anybody can give me the solutions for this.
Regards
Prakash T

Prakash
First of all, in the Query Template Editor (if u hv not already SELECT the server name from the list) just simply click on the server name available in Servers' list, then u'll get the list of modes for the server
if still not shows, then
in the xMII Menu, check the Roles assigned to the server 'Simulator'. It can be checked from the option Data Access under the tab Security Services in the xMII Menu. Be sure if this server is assigned with Everyone, Administrator. if not, then assign those roles to that server.
Then also check the configuration of that server 'Simulator' specially whether or not it is enabled. this can be done from the option Data Servers under the tab Data Services in the xMII Menu.
Regards
Som

Pavillion N-15 030us stuck in safe mode with no display

The display is broken and I was using a monitor connected thru the HDMI cable. I restarted the notebook in safe mode which I take it does not enable the HDMI port? So now I am stuck in safe mode with no display.

Hello @LogicMantra,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your desktop is not able to display after booting in safe mode, and I would be happy to assist you in this matter!
To correct this issue, I recommend borrowing an HDMI compatible monitor and updating the drivers for your system this way. If this does not work, please follow this document on Computer Starts but Monitor Remains Blank (Windows 8).
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Nokia C7 Display Scale lines on the Display (Known...

Hi,
On Nokia C7 Display there is scale lines on it, It more visible on white background.
Kindly some one help me on this.
1. Is this a known issue ?
2. Is this a display problem ?
3. Is this a Software Bug ?
Even the replaced display have same scale lines on it.

Same on my C7. I noticed it when I buyed my C7 Dec.2010. Meanwhile becauso of the purple tint I received my money back. When I buy new C7, I'll drop here some info about it.
Now I'm waiting at Anne FW to be in new devices.
Nokia 701
(RM-774, Symbian Belle, 111.030.0609)

Nokia C7 Display Defect

Hi,
I have a Nokia C7-00 that was purchased SIM free and unbranded in Germany, with which I'm experiencing distinct colour banding / gradient problems. It is also common on Nokia N8 displays. I'll try to describe my problem:
The first tell tale sign of the issue seems to be a common one: A purplish tint on the top half of the screen saver clock (visible when the phone is keylocked and then the menu key is pressed).
As time has passed by since first noticing this problem- I have also noticed that videos and images that are predominantly dark are also having issues being displayed properly. The effect being similar to if the image was being shown on a screen with limited colours, for example, if you set your computer screen to display only 16bit colours. In areas of images that black is supposed to fade into lighter colours, the image is completely off.
There is an active discussion about this problem on another forum:
http://www.nokiausers.net/forum/nokia-n8/39462-i-think-nokia-using-two-different-types-screen-n8-may...
I have attached pictures of my screen with the problem.
I have contacted Nokia care and they have no input other than re-installing my firmware (which is impossible to do anyway- as they seem to have provided me with inaccurate instructions- there is no way to re-install my firmware via Ovi Suite or the handset)
Any help?
I've since moved away from Germany and from what I understand my 2 year warranty is only valid in Europe...
Attachment 1 is supposed to be black to white squares in increasing gradient
Attachment 2 is supposed to be black into white, but on my display somehow a brown/purple tint is in between the black and white
Attachment 3 is the screensaver clock that is supposed to be black, but on my screen the top half is displayed with a purple hue
Here is an image of two Nokia N8's from someone experiencing the same display characteristics as my C7, and one with a good display. The problem can be seen better in these images:
Nokia N8 Display 1
Nokia N8 Display 2
Attachments:
DSC00256.jpg ‏10 KB
DSC00260.jpg ‏7 KB
pic.jpg ‏7 KB

hi guys my n8 has this issue too
iam not impressed by it and have contacted nokia on facebook , twitter , email and phone yet they dont seem the least bit intrested at the minute
i have even got a nokia tech from a nsc to report it to them via correct channels yet nokia dont seem to care about this
it happends when colours fade into each other or get lighter , main colours are white/grey/black and these turn to a purple/red colour just like in the pictures above
ive also had another n8 and it didnt have this problem , my girlfriend has a n8 too and is on the same product code etc and the screens are so different it is unreal
i thin nokia might be using two screens on the n8 too meet demand as amoled screens are in demand at the minute so maybe they have sourced another froma differnt amoled maker
i cant see any other reason for the difference in image quality between my girlfriends and my screen , same product code , same firmware , same theme and settings yet the results are so different its worrying
forget using the n8 to watch videos if you have one of these screens with a purple tint as the blacks/whites/greys will look purple and ruin the film etc
my video playing has gone from watching dvd quality to watch a dodgy pirate with pixelation and purple tints and banding
id like to see more users post up here so nokia can see there is a bit of a problem and start looking into it as at the minute they dont seem fussed
perhaps people havent noticed the purple tint but if you have seen one with a proper screen and then one with a puple tint you can easily spot the difference the screen quality is no where near as good as the ones without tints , coliurs are deeper richer and nicer to view on the screen wihout the tint
iam waiting for another n8 to turn up today as a replacement if it has the purple screen too i will be extremley gutted and a unhappy n8 user even though its my dream device itll feel tainted because of the screen

Nokia n95 display crash repair

Kindly help me to repair my nokia n95 display crash . How much it will cost in India. I am from Imphal.
Moderator note: E-mail address removed.
Message Edited by wildreamer on 01-Nov-2009 06:36 AM

Contact your local Nokia Care Point and request a quotation.
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Nokia 5610 display replace with Nokia 7600 SuperNo...

Hello, is that possible to replace Nokia 5610 display with Nokia 7600 SuperNova's one?

not a hope.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Nokia e66 Displaying Mode Mode, Possibly Bricked

I Was Updateing, And then my phone Froze on a white Screen
And i waited, and waited, and Left it all day (and eventually it just went flat)
And Now when i turn it on, thats all it says
Is there anything i can do? About this
I Cant even press any buttons, Or get any response out of it
The only way to turn it off, is to remove the battery, it charges
But thats about it, it can be detected by my computers usb, but when i try to software update it
as an attempt to fix it, it says cant detect phone type. Anything to help
Would be much appreciated

See this article for your options on how to fix it:
/discussions/board/message?board.id=topfaq&thread.id=112

Non-compatible mode Nokia 515

Heyhey,
how do I get out of file transfer mode when I connect my Nokia 515 to pc using a USB cable?
It says it's connected in non-compatible mode.
What I am trying to do is: update the software. I'm using the dual-sim version.
Wireless update is impossible, my mobile internet and 3G both work, but when I ask my phone to download software it says I have no network connection. That's why I tried connecting it, I installed Nokia Suite, which is incompatible, Nokia Software Recovery Tool, which is incompatible, Nokia Software Updater, which is incompatible, so now I'm trying Nokia PC Suite, which says the phone is connected in non-compatible mode, which is slightly better.
Does anyone know how to update it? it's on versino 09.04, it's Nokia 515.2, and RM-952.
This phone is outrageously expensive for a feature phone, thank god for the battery life and build quality, and even the camera is okay. It's disgusting that this lowest-tier bug-filled software is put on it (haven't installed a single downloaded app, yet it crashes every now and then while writing or receiving texts). Now I simply want to update it.
If anyone is able to help me, I hope they'll feel the most wonderful person in the world for at least a week, because that is what they'll be to me.
I am very good at following step-by-step solutions.

Okay, I solved the non-compatible mode thing! Because I'm a nice guy, I'm gonna tell how I did it, not like the guys on the other hundreds of forums I visited who just said "solved it ".
I had to connect as a modem, then windows looked for a whole bunch of drivers, and apparently one of the drivers it needed for modem connection is also helping the compatibility with normal pc suite connection.
Now, it also worked for the nokia software updater, but it said that the device is not supported as well.
I wonder if it also displays that message when there's no update available? On the site it says updates are into version 10, and I'm still into 9, but maybe there's still regions that still have what I have? I bought it on german amazon and am using it in Belgium (First World Country, yet it is not sold here?) The search for updates continues.

HT3131 Operating MBP in closed clamshell mode with external display

I have a new MBP retina display. Trying to operate in a closed clamshell mode. I connect a USB keyboard and a wireless mouse. My external display is a Dell 2007FP display screen connected via a VGA adapter. Whenever I close the computer lid to operate in clamshell mode the screen goes to sleep/power save mode. Have tried various combinations of attaching keyboard and mouse first then screen, switching computer off on etc. The external display states there is "no signal coming from computer"...any suggestions/advice would be greatly appreciate

Congratulations on taking one more step in becoming more self sufficient in tech stuff.
But I have to wonder why you spent so much on a Retina display only to have it cooking uselessly there.

10.4.3 update destroys portrait lid closed mode with cinema display

The 10.4.3 update destroys the ability to use an external cinema display in closed lid mode. In particular using the rotate by 90 degrees option. Once set the external display goes nuts and can not be set back to landscape -- even in open lid mode. Zapping the PRam is not sufficient to reset the display.
Anyone solve this problem?

I'm interested in this issue too, as I intend to get an MBP but use it with an external screen and keyboard most of the time.
I'd also like to know about ventilation - where does the cooling air come from and go to? What parts need to be kept clear, and which bits can I have up against or close to a bookshelf or hutch or whatever?
Thanks in advance.
PS, I think the glossy screens look fantastic, but also think I'll go for matte since they are more practical.
G3 B&W Mac OS X (10.4.8)

Clamshell mode thinks internal display is running

I use my MBP with an external display. Unfortunately, it always thinks that the internal display is still running even after I detect displays. The MBP is closed and I use a USB mouse and keyboard. The pointer can easily get "lost" off the screen. I've reset and restarted but the problem always comes back.

I just open my MBP before plugging up the TB display. Then after the TB comes on, I close the MBP back into clamshell mode. Works better for me that way.
Does that work for you as well?
-Brad

Trouble getting out sleep mode with external display

My 15" ALPB si connected in closed mode to a Viewsonic external monitor. When not used for a while, the Powerbook will of course get to sleep. But then there is no way to make it wake up again. Disconneting screen and other devices won't help. Only a restart will do, thereby losing all ongoing work. (BTW, never had this problem with a 12" ALPB also connected to the same type of display).
I know that by removing the monitor shutdown option in the energy saving preference panel it will dissapear. But I really need the display sleep option to work.
Someone experiencing this problem? Any solution?
Thanks. Mark

Thanks for your suggestion. That's actually a workaround I've used. The only problem is, the display isn't really put to sleep. The result: I still get an extended desktop and occasionally I "lose" my pointer. A bit annoying, but thus far the only solution I've come up with.

Silverlight (Lovefilm / Netflix) MBP 13" Early 2011, Heating and Exhaust Problems, Clamshell mode with TB Display

Hi all
I was hoping if someone can help me out...
I have a:
Mac Book Pro 13" (Early 2011) (i5, Crucial 8GB RAM, 120 OWC 6G SSD)
Apple Thunderbolt Display
I run my MBP in clamshell mode always.
Whenever i run Netflix or Lovefilm video in full screen using either Firefox, Chrome or Safari. The Silverlight plug-in is hogging the CPU.
My exhaust (CPU fan) goes crazy, its soo loud its annoying while your trying to watch a movie on your Thunderbolt Display.
Temperature reaches: 83 Celsius
Fan (Exhaust): 5620 - 6200 RPM (immediately jumps from 2001 to 5620 / 6200)
If i watch a movie full screen on my 13" MBP with my Thunderbolt display disconnected:
Temperature reaches: 81 Celsius
Fan (Exhaust): 3198 RPM (it slowly crawls up form 1998 to 3193)
Now i changed my resolution on my Thunderbolt disply to 1420x720 and it helps with the fans going crazy, they slow down slightly...
I've tried a PRAM and SMC Reset, all my firmware is up to date.
My Macbook Pro is slightly raised at the back so air can flow through the vents.
My FANS are just going crazy!! something is ridicously heating up internally in my machine causing them to go mental.
You just cannot watch a movie on netflix or lovefilm on your thunderbolt display comfortably if your fans go beyound 2800RPM.
I even installed Windows 7 on Virtual Box and tried running lovefilm / silverlight and it did not help my problem.
PLEASE CAN SOMEONE HELP! how can i keep my fans below 2800 RPM while running silverlight?!?!

Flash like Silverlight are CPU heavy applications.
The MacBook Pro can be run in clamshell mode but only when not running extremely CPU intensive tasks
like what you are doing.
If you keep the mac book running this way for too long you might stress the materials and run into danger of getting thermal damages.
Chrome is actually in recent time getting very slow and I noticed in a comparision test that Firefox provides me up to 30 to 40% more free CPU time.
If running netflix I would suggest currently NOT using Chrome.
Windows 7 virtualized inside virtual box and then on top netflix is uhm a pretty bad idea because all those three things together are already CPU hogs.

"mode mode Nokia" in display

Similar Messages

Maybe you are looking for