Mode recovery avec erreur 29 sur Iphone 3GS
Impossible de restaurer Iphone 3GS, il reste en mode de récupération et Itunes indique l'erreur 29.
Batterie changée, l'Iphone fonctionnait correctement, puis à la mise à jour du logiciel, l'erreur est apparue
Merci pour votre aide, ai effectué toutes les procédures, rien n'y fait
Salutations
Try this support document http://support.apple.com/kb/TS3694
This is the information about Error 29
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Similar Messages
-
If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway?
If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway? I sometimes would like to turn of the company signal, but at the same time I would like to use the internet; without taking our the SIM card. Can this damage my iPhone in any form? It would be grateful your help!
"If I turn on the wifi during airplane mode, can this damage my iPhone 3Gs in someway?"
No. This is a normal feature of the iphone. It is intended to work this way. -
Problème avec icloud sue iphone 3gs
J'ai un problème avec icloud sur mon iphone 3gs, quand je veux activer icloud il me dit que le nombre maximum de compte gratuit est atteint alors que je n'ai activer aucun compte. Pouvez-vous m'aider ?
Moi aussi si tu as régler le probléme je cherche vrt la solution
-
Recovery of Reminder on iPhone 3GS
Hi. I had very important reminders on the Reminders/to do list on my iPhone 3GS. Is there any way I can recover them? This is urgent!!!
Only an iphone backup from the time before you switched to the second computer could help. And it would only contain the photos taken with your phone ( camera roll) not the ones from the albums.
-
Bonjour
j'ai fais réparer mon LCD et il a très bien marché jusqu'a ce matin ou l'écran
est devenu tout blanc je l'ai rebooté sans succès je l'ai restauré sans succès !
aidez moi !Google Translate:
Hello,
Following the fall of my iPhone I went to change the screen but morning the screen went all white restoration did not work either reboot the advice you would give me a thank you!
@ j2r1995
Bonjour,
Google Translate n'est pas parfait. S'il vous plaît utiliser des phrases courtes. Peut-être vous dire cela. J'ai laissé tomber mon iPhone. Ce matin, l'écran est blanc. Restauration ne fonctionne pas. Reboot n'a pas fonctionné. S'il vous plaît aider.
Reply by Google Translate with short sentences:
@ j2r1995
Hello,
Google Translate is not perfect. Please use short sentences. Perhaps you mean this. I dropped my iPhone. This morning the screen was white. Restoration did not work. Reboot did not work. Please help.
Over to you, iPhone gurus!
Regards,
Ian. -
Jabra CLIPPER multiuse problem. (iPad 2, iPhone 3GS)
I have a three devices Bluetooth receiver "Jabra CLIPPER", iPad 2(4.3.3) and iPhone 3GS(4.3.3).
So..
Jabra CLIPPER has a "multiuse function". It is connect to between two devices at same time.
(ex) CLIPPER connect to iPad 2 A2DP and connect to iPhone 3GS HFP.)
But, I can't connect two devices at same time in any way.
Jabra supporter explained to me howto below.
1. Remove clipper bluetooth pairing history on iPhone 3GS, iPad 2
2. Power off clipper
3. Power on & pairing mode clipper.
4. iPad 2 founded "Jabra CLIPPER" and touch to pair & connected. (1st device.)
5. Power off clipper again. (Disconnected from iPad 2)
6. Power on & pairing mode clipper again.
7. iPhone 3GS founded "Jabra CLIPPER" and touch to pair & connected.
(2nd device.)
8. Do not Power off clipper & go back to iPad 2 Bluetooth Preference, select again "Jabra CLIPPER".
9. That's all. You can use two devices at same time.
But.. I saw a popup messsage "Connection Unsuccessful". iPad 2 (1st device) do not connect "Jabra CLIPPER" again.
Jabra supporter explained to me again.
"What may be happening is that the iPhone is taking over the A2DP bluetooth profile, along with the cellphone profiles. The Clipper should connect the A2DP or stereo profile to one device and the rest of bluetooth profiles to another. In this case, the iPhone seems to be taking over all profiles when the pairing is established. In order to connect the Clipper with two different devices one of them must handle the stereo or A2DP profile, and the other will use only the HSP and HFP (cellphone bluetooth profiles)."
Plz help me..Hi tagnee:
The solution for your problem:
In order for the Jabra Clipper to be able to pair with both the iPad and iPhone, one has to first pair each device separately with the Jabra Clipper while turning off Bluetooth on the other device. Once pairing on both devices is successful, all you need is to connect both to the Jabra Clipper, and this was when I noticed a few hiccups.
In order for the Jabra Clipper to be able to connect with both the iPad and the iPhone, one have to first connect the iPad with the Jabra Clipper while turning Bluetooth off on the iPhone. Once connected successfully with the iPad, turn on the Bluetooth on the iPhone and press connect. It doesn't work the other way around, i.e. connecting the iPhone first and then the iPad.
If one steps out of range of the Bluetooth range of either one of the devices, one has to reconnect both devices all over again.
I hope this information is helpful.
Greetings from Chile! -
Old version of Spotify on iOS 6 in France (iPhone 3GS)
Since Spotify update on Apple Store, it is impossible to install Spotify on my iPhone 3GS as it has to stay on the iOS6 . Do you know a way to run Spotify on iPhone 3GS (iOS6) ?
Depuis la mise à jour de Spotify sur Apple Store, il est impossible d'installer Spotify sur mon iPhone 3GS car il doit rester sur l'iOS6. Connaissez-vous une façon de faire fonctionner Spotify sur iPhone 3GS (iOS6) ?Yes, your are right.
You can install the iBooks 3.1.3 in your iPod 4G, using iOS 6.1.5, through the iPod. However, Apple did not all the necessary job: when you syncronize the iPod with iTunes, iTune insist in update the app. If you forget that fact, iBooks is updated to 3.2 version.
So, actually the question is: How to block the update of iBooks permanently. -
IPhone 3GS stuck in recovery mode while updating to iOS 6.1
Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!
Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
I had another problem and that was...
Error 1603 and 1604 : These are USB driver connectivity problems.
Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems. -
I just bought a iphone 3gs from my friend. when he gave it to me it was in recovery mode. Now everytime i try to Restore it i get the error 1603. is there any way to fix this ? please help !
iOS: Unable to update or restore
Are you sure your friend didn't jailbreak it?
If so, save yourself a lot of time and trouble - throw it in the trash. -
my iphone 3gs died and now it wont make it past the apple logo screen so i put it in recovery mode and hooked it up to my itunes on my home computer now it will say do you want to restore this iphone i click ok but then after it exctracts the software then starts to restore the screen goes black and it shuts off then 10 seconds later it turns back on it wont make it past extracting software please help me im getting really mad plaease help. it wont restore my phone and the error message 1611 come up i dont get it.. also the lock button on my iphone is broken and only works when i squeeze the topo of the iphone together so i cant put it in DFU mode
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
IPhone 3gs stuck in recovery mode, firmware iO 5
My iPhone is stuck in recovery mode. I have a 3gs, firmware 5.0.
Before I tried to restore it, my iPhone would randomly shut off, turn back on, and display a notification that said "Activation Required." Now, sometimes my phone would shut off again and return to it's previous working state. However, this time it did not. I put the phone into recovery mode and tried restoring it on my Acer Aspire 1 with Windows 7. iTunes put the phone through the various stages of restoration; Extracting Software, Preparing iPhone for Restore, Restoring Software, Verifying Restore, Restoring Firmware. After all of this, a nice little error message pops up that reads, "The iPhone 'iPhone' could not be restored. An unknown error has occured (1)."
After this little mishap occured four more times, I decided to click "More Information," and was promptly brought to the help page set up here. I proceeded to troubleshoot by updating to the latest version of iTunes, updating my security, restarting my computer, and so forth until all the necessary precautions were performed. Now it was back to iTunes to try my luck at getting my life back.
To my delight, I found that this time the restoration process took upwards of forty minutes to complete. However, to my despair, a nice little error message popped up that read, "The iPhone 'iPhone' could not be restored. An unknown error has occured (-1)." Ah, a different error message! i thought, feeling as if there was hope in fixing my phone. I clicked "More Information" and skimmed through the specific error messages, looking for that lucky -1. Nothing.
I need help. I have attempted to restore my phone a dozen times since this occurence, and I'm growing tired of going through the same process over and over and getting the same result. My phone is stuck in recovery mode now. I've tried restoring the phone on 2 different computers, to find out if, in fact, the problem was my iPhone and not my computer.
Some important information you may need to know in order to help me solve my problem:
iPhone 3gs
Running iOS 5.0
Using iTunes 10.5
On an Acer Aspire One Netbook
Running Windows 7
All security updates installed as of November 7, 2011
Also iTunes 10.5 on Acer Aspire 57354774 laptop
Running Windows 7
Reply ASAP with a solution please!Hello,
I have an iPhone 3GS which I updated with the last firmware (iOS 5) 2 weeks ago. Everything goes ok.
And suddenly, while the phone was recharching. It asked me to activate it but I was unable to do it as it was rebooting constantly every time I connected it to iTunes.
I tried both 2 restore modes (Restore and DFU) but since I can't achieve a restore with the last Apple iOS 5 firmware. I got the error code 1.
I I tried on 3 different computers but same error. I really don't know what to do next...
I already called Apple Customer Care and I'm still waiting for an answer. I let you know.
And you, did you manage to get your iPhone back alive ? -
My iPhone 3Gs went into Recovery Mode yesterday when I got home. When I plug it into my computer iTunes opens and gives me this message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." I click the "Restore iPhone" button and wait while iTunes reinstalls the software on the iPhone. As soon as the install is done, I get the same message again "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." I'm stuck in a Recovery Mode loop. How do I get out?
This iPhone has never been jailbroken. After a litte research on line I saw some people got stuck in Recovery Mode after a jailbreak, but this is not the case here. Please help.Hi domaley,
If you are unable to restore your iPhone from Recovery Mode, you may find the following articles helpful:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
- Brenden -
Iphone 3gs stuck in recovery mode , power button dosent work, and cant connect to itunes.
Well This Is Bad.
So today i used my iphone 3gs.. and then it had a problem so i restored it. then during the restore it gave me error 20. i tried looking at apple support but it didnt help.
so heres what it has:
1. broken power button
2. cant be seen on itunes.. not even the mac!
3. stuck in recovery mode.
4. dosent sence a computer.
now i hear theres a "freezer trick" to get it out of this mode. but i tried it and no luck.
i also looked on youtube, google,and apple support and stores. but theres nobody who had this problem.
im trying to wait till the battery runs out but that will take long.
what should i do?!?You are right there as a weard issue try with the battery comes out and then try to connect to the itunes should be working properly, if not fix the power on/off button because are escential to do it.
-
hi desperately need help. my iphone 3gs is stuck in recovery mode... when i try and do the restore via itunes it goes through the motions but when it gets to the end it tells me there was an error and it couldnt be restored... originally it was an ex contract phone that i had opened to orange from vodafone.. it was fine until i tried to do the ios 6 update
There is a way to get it recovered from the so called DFU mode. Try to restart the phone while holding the home and power button at the same time. Then try to connect it to iTunes and do the same again. If you try that again till it works you should be able to use your iPhone as before.
-
HT201210 Why can't i get my iphone 3gs out of recovery mode when i try to restore it?
Hello People,
My iPhone 3GS has gone into "Recovery Mode" and ive tried to restore it. When it reaches the firmware it stops and my iPhone restarts and i get an error message saying "The iPhone 'iPhone' could not be restored. An unknown error has occured(1)." Ive tried putting it into DFU mode but it doesn't seem to work (its like it is in a loop). Ive tried different firmwares such as 3.1.3 and 4.1 and it still stops at the firmware section. The iPhone was new out of the box about 4-5 days ago and i get this.
Any suggestions please post below this thread.
Best Regards,
Kieran
<Email Edited By Host>You've just exposed your email address to millions of people, some of whom are spammers or worse. That was not a good idea. Expect a massive increase in spam as a result, unless the mods see it and edit it out of your message. You can only restore a 3GS to iOS 5.1.1. If you are trying to install an earlier version you must hack or jailbreak your phone; error 1 is usually an indication that the phone is jailbroken. See: http://support.apple.com/kb/TS3694#error1
Maybe you are looking for
-
Hi! I've been reading about J2ME lalely, & just tried to compile a midlet, I've install wireless toolkit, but then after compiling the midlet using javac -bootclasspath <path>cldcapi11..... DateTimeApp.java I get the error package javax.microedition.
-
My iphone 5 is disabled and when i go to itunes it wants a passcode i cannot enter.
-
Powerbook 150 wont recognize floppy disc
I inserted a windows (dos)formatted floppy disc into my newly acquired powerbook 150, it does not show on the desktop and I cannot eject it anymore. Any suggestions appreciated.
-
Design console is not allowing to login!!
Hi, I am using OIM9101/jboss-4.2.3, I am able to use webconsole but when I use design console it doesnt allow me to login and gives the following error == Exception in thread "main" java.lang.NoSuchFieldError: TRACE at org.jboss.logging.Log4jLoggerPl
-
How to remove default parameter from a report
Post Author: sijdk CA Forum: General hi, we are using crystal report server XI . in one report i have added Date time Range fields. with that, "include this value" and "no upper value" checkboxes are added defaultly. i just want to remove those check