Mode Switcher doesn't support my sound devi

I was unable to switch the modes before, I found the application in the program files, but it tells me that my device is not supported. Any thoughts as to what might cause this?

I just searched for this and saw that X-Fi XtremeAudio doesn't have different modes? That's kind of odd seeing as I have the application for it and the help box tells me I can.

Similar Messages

  • LOVE LOVE LOVE my iPhone so far, but ringer switch doesn't stop all sounds?

    With exception of a few concerns like somewhat low speakerphone and earpiece volume, no non-pinch zooming in maps, not being able to expand email contacts (to see the actual address), not having any auto-fill in Safari, and some stability issues (a couple Safari crashes on complex sites - to be expected until they collect enough bug data and make a patch)... I love my iPhone! After updating my OS & iTunes, activation took only a few minutes (early evening of the 29th) since I was an existing account holder. I did have a corporate discount on my plan and was worried I would be denied, but it went through just fine - fwew!
    So then, I'm in a movie theatre today during a dramatic, quiet passage, with the ringer switch off (I'm so polite! <bg>), and low and behold, here comes a clever marimba roll. Having not heard this other than in the ringer setup area, I wasn't sure what it was (still not). Hitting the sleep button on top didn't do anything... it bleeped 3 times, almost sending me out of the theatre in embarrassment. I don't have to go into the settings and turn off all the notices do I? The ringer off is supposed to stop ALL sounds, per Apple's site. Anyone experience this or have a solution?
    PM G5-Quad 2.5GHz | eMac G4 1.25GHz | PM G4 800MHz | PB G4 1GHz 17 | PM G4 400MH   Mac OS X (10.4.5)  

    Per the manual, the switch doesn't stop the alarm clock from going off. Which is set to marimba by default.

  • Silent mode switcher doesn't work!

    Hi, I have an iPhone 3Gs covered by warranty and I would like to know if Apple changes my iPhone if my Silent mode swithcer doesn't work?? (if my English isn't very good is because I'm Italian xD)

    Most likely yes, as long as it's not due to user damage.

  • KT880 Delta LSR doesn't support second sound card?

    Hello,
    I've just bought my new KT880 Delta board because of burning my old KT4V.
    In my last configuration Ii had sound on bord (5.1) and one sound card added for microphone and headphones.
    Now i can't force my KT880 Delta LSR to support two sound card on the same time. When I don't plug PCI card system support card-on-board.
    But when I add this PCI card system dosen't see onboard card. In BIOS onbord card is turned on.
    What should I do to solve my problem?
    BRGDS
    Max.

    Quote from: Doctor Stu on 24-May-05, 04:34:01
    maxisus, maybe the PCI card is conflicting with onboard?
    have you tried the PCI sound card in another slot?
    No, i didn't try. I thought that is no different witch pci slot you use.
    Quote from: Doctor Stu on 24-May-05, 04:34:01
    did you do a fresh install of windows when you replaced the mobo?
    yes, i've formated hdd and installed all once again
    Quote from: Doctor Stu on 24-May-05, 04:34:01
    also KT880 probably needs more power than KT4V - if your PSU is now not powerful enough, some devices cannot start up correctly.
    I have got 350 Watt - i bought new because of special 4-pin plug for CPU. In the shop gays sad PSU should be enought for my configuraction of pc.

  • Nexus 3548 Switch doesn't recognize command " vtp mode Server / Client"

    Hi Community.
    I have a brand new Nexus 3548 switch. And I did the vtp setup:
    vtp version 2
    vtp password ******
    vtp domain *****
    Every thing is ok, but If I use the command "vtp mode server" the switch doesn't know that command. Even it doesn't know the "vtp mode" subcommand?
    What's the problem ?
    Best regards patrick

    The Nexus 3548 supports only Transparent mode:
    Step 5 vtp mode {transparent| off} Sets the VTP mode to transparent or off.
    http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3548/sw/layer_2_switching/b_Cisco_N3548_Layer_2_Switching_Config_503A1.pdf
    I have no clue why.
    Patrick

  • I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

    I recently brought a HD PVR, i put in the disk to install the hard drive and it said " This program doesn't support DOS Mode! how do i get out of DOS Mode?? Please Help

    What exactly are you trying to do? PVRs are for recording from TV not computers.
    Either way, if it's complaining about DOS mode, it's Windows oriented software and not Mac compatible.

  • MS-DOS.This system doesn't support fullscreen mode in windows server 2008

    MS-DOS.This system doesn't support fullscreen mode.Choose close to terminate the application. Unable to open full size screen mode for MS-DOS in virtual windows server 2008

    Please anybody could suggest why the MS-DOS does not open full size mode in Windows server 2008. PC cate shell for windows application Is running and alerting this error msg. This system doesn't support fullscreen mode. Choose close to terminate the application.
    Please can any body help on this regard.

  • Wlan doesn't support monitor mode

    Hi everybody, 
    I'm new in the Arch's world and today I installed Arch on my MacBookAir 4.2 and I installed wifite but when I try to change the wl in "monitor mode" the wl crashes and I must restart the wl.
    This is a my pc info with this commands:
    uname -a
    lspci -nnk | grep -iA2 net
    lsusb
    iwconfig
    rfkill list all
    lsmod
    Linux Arch-MacOSX 4.0.4-1-ARCH #1 SMP PREEMPT Mon May 18 06:43:19 CEST 2015 x86_64 GNU/Linux
    02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
    Subsystem: Apple Inc. AirPort Extreme [106b:00e9]
    Kernel driver in use: wl
    Bus 002 Device 003: ID 05ac:8404 Apple, Inc. Internal Memory Card Reader
    Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 05ac:850a Apple, Inc. FaceTime Camera
    Bus 001 Device 005: ID 05ac:024d Apple, Inc. Internal Keyboard/Trackpad (MacBook Air) (ISO)
    Bus 001 Device 008: ID 05ac:821f Apple, Inc. Built-in Bluetooth 2.0+EDR HCI
    Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
    Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. 2.0 Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    wlp2s0 IEEE 802.11abg ESSID:"cvsg1"
    Mode:Managed Frequency:2.452 GHz Access Point: 64:66:B3:2D:FF:BD
    Bit Rate=52 Mb/s Tx-Power=200 dBm
    Retry short limit:7 RTS thr:off Fragment thr:off
    Power Management:off
    Link Quality=33/70 Signal level=-77 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    Module Size Used by
    nls_utf8 16384 0
    ntfs 204800 0
    ppp_deflate 16384 0
    bsd_comp 16384 0
    ppp_async 20480 1
    crc_ccitt 16384 1 ppp_async
    l2tp_ppp 24576 0
    l2tp_netlink 20480 1 l2tp_ppp
    l2tp_core 32768 2 l2tp_ppp,l2tp_netlink
    ip6_udp_tunnel 16384 1 l2tp_core
    udp_tunnel 16384 1 l2tp_core
    pppoe 20480 0
    pppox 16384 2 l2tp_ppp,pppoe
    ppp_generic 32768 10 l2tp_ppp,pppoe,pppox,bsd_comp,ppp_async,ppp_deflate
    slhc 20480 1 ppp_generic
    btusb 40960 0
    bluetooth 442368 2 btusb
    hid_generic 16384 0
    wl 6303744 0
    coretemp 16384 0
    intel_rapl 20480 0
    hid_apple 16384 0
    iosf_mbi 16384 1 intel_rapl
    x86_pkg_temp_thermal 16384 0
    intel_powerclamp 20480 0
    joydev 20480 0
    kvm_intel 155648 0
    mousedev 20480 0
    kvm 446464 1 kvm_intel
    crct10dif_pclmul 16384 0
    nls_iso8859_1 16384 1
    crc32_pclmul 16384 0
    nls_cp437 20480 1
    crc32c_intel 24576 0
    i915 1024000 8
    vfat 24576 1
    fat 65536 1 vfat
    ghash_clmulni_intel 16384 0
    uvcvideo 86016 0
    usbhid 49152 0
    snd_hda_codec_hdmi 53248 1
    hid 110592 3 hid_generic,usbhid,hid_apple
    bcm5974 20480 0
    applesmc 20480 0
    mac_hid 16384 0
    iTCO_wdt 16384 0
    evdev 24576 13
    snd_hda_codec_cirrus 20480 1
    iTCO_vendor_support 16384 1 iTCO_wdt
    videobuf2_vmalloc 16384 1 uvcvideo
    led_class 16384 1 applesmc
    aesni_intel 172032 0
    snd_hda_codec_generic 65536 1 snd_hda_codec_cirrus
    drm_kms_helper 102400 1 i915
    input_polldev 16384 1 applesmc
    cfg80211 483328 1 wl
    aes_x86_64 20480 1 aesni_intel
    hwmon 16384 2 applesmc,coretemp
    videobuf2_memops 16384 1 videobuf2_vmalloc
    lrw 16384 1 aesni_intel
    gf128mul 16384 1 lrw
    glue_helper 16384 1 aesni_intel
    ablk_helper 16384 1 aesni_intel
    cryptd 20480 3 ghash_clmulni_intel,aesni_intel,ablk_helper
    videobuf2_core 40960 1 uvcvideo
    pcspkr 16384 0
    snd_hda_intel 28672 3
    v4l2_common 16384 1 videobuf2_core
    i2c_i801 20480 0
    snd_hda_controller 28672 1 snd_hda_intel
    snd_hda_codec 114688 5 snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller,snd_hda_codec_cirrus
    videodev 135168 3 uvcvideo,v4l2_common,videobuf2_core
    uas 24576 0
    media 20480 2 uvcvideo,videodev
    sbs 16384 0
    snd_hwdep 16384 1 snd_hda_codec
    usb_storage 61440 1 uas
    rfkill 24576 3 cfg80211,bluetooth
    drm 282624 10 i915,drm_kms_helper
    sbshc 16384 1 sbs
    apple_bl 16384 0
    ac 16384 0
    snd_pcm 90112 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    video 24576 1 i915
    battery 20480 0
    snd_timer 28672 1 snd_pcm
    mei_me 20480 0
    button 16384 1 i915
    shpchp 36864 0
    mei 77824 1 mei_me
    intel_gtt 20480 1 i915
    snd 69632 14 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_hda_codec_cirrus
    i2c_algo_bit 16384 1 i915
    lpc_ich 24576 0
    i2c_core 53248 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
    soundcore 16384 2 snd,snd_hda_codec
    processor 28672 0
    sch_fq_codel 20480 3
    ext4 512000 3
    crc16 16384 2 ext4,bluetooth
    mbcache 20480 1 ext4
    jbd2 90112 1 ext4
    sd_mod 36864 5
    ahci 36864 4
    libahci 28672 1 ahci
    libata 184320 2 ahci,libahci
    scsi_mod 147456 4 uas,usb_storage,libata,sd_mod
    uhci_hcd 45056 0
    ehci_pci 16384 0
    ehci_hcd 73728 1 ehci_pci
    usbcore 200704 9 uas,btusb,uhci_hcd,uvcvideo,usb_storage,ehci_hcd,ehci_pci,usbhid,bcm5974
    usb_common 16384 1 usbcore
    0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
    1: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
    How I can use the monitor mode for use wifite?
    Thanks for any answer!!!
    Last edited by skioda86 (2015-05-22 10:00:45)

    As far as i know the wl (proprietary broadcom driver) doesn't support monitor/injection.
    But the Mac80211 alternatives might. If they support the wifi chip in your MacBook.
    From experience with a friends MBP it didn't yet support his broadcom so had to use WL to get basic network connectivity and used an Dual-band(2.4Ghz/5Ghz) 2x2 11n/ac USB dongle for his monitor/injection needs.

  • X-FI mode switching broke after win upd

    Windows update came up with an auto update for the Windows Media Player, and the mode switching broke on the soundcard. Musicmatch broke as well, and wouldn't get past the start screen. After uninstalling musicmatch, and uninstalling the sound card via the cd, and then updating the x-fi over the web, I still get the same message:
    The audio device is not supported by the apllication. The application will exit. Or I get a chooser asking me to select the right audio device, anbd the only entry is Follow Windows Default.
    Any help with this? Is anyone else having this problem?
    TIA
    Stretch

    OIk, checked a feew things. Firstly, it had a shared IRQ after I installed the intel chipset stuff. I went ahead and moved the card to another slot, it reassigned as IRQ 4 in the bios, and 22 in the OS. Still plays system sounds, and WMP, but no creative or Musicmatch.
    Creative Diagnostics says this about it
    Why is it showing hardware disabled?
    Device name: - Creative X-Fi Audio Processor (WDM)
    Hardware location: - PCI bus 2, device , function 0
    Status: - Device driver is loaded. - Device is configured. - Device can be rebalanced.
    Problem: - Device has no problem.
    Device capabilities:- Hardware disabled
    Hardware ID: - PCI\VEN_02&DEV_0005&SUBSYS_00202&REV_00
    Compatible ID: - PCI\VEN_02&DEV_0005&REV_00
    System resources
    IO ports used: - DCE0 - DCFF
    IRQ channels used: - 22
    Memory addresses used: - FBC00000 - FBDFFFFF - F4000000 - F7FFFFFF
    Registry properties - Service name(SZ) : ctaud2k - Device class(SZ) : MEDIA - Device class GUID(SZ) : {4D36E96C-E325-CE-BFC-08002BE038} - Driver key(SZ) : {4D36E96C-E325-CE-BFC-08002BE038}\008 - Configuration flags(DWORD) : 0x009C000 - Manufacturer(SZ) : Creative Technology, Ltd. - (SZ) : Creative SB X-Fi - Device PDO name(SZ) : \Device\NTPNP_PCI000 - UI number(DWORD) : 0x009C0002 - Bus type GUID(BINARY) : B0 DF EB C8 0 B5 D0 80 E5 00 - Legacy bus type(DWORD) : 0x009C0005 - Bus number(DWORD) : 0x009C0002 - Enumerator(SZ) : PCI - Device address(DWORD) : 0x009C0400
    I am sure it is a pretty simple problem. The app that keeps popping up when the error msg is generated is CTaudsel. It has it's own directory under creative, and when run directly, shows only :Follow Windows Default.
    When the system was first reinstalled, the selector had all choices, including modem, and SB XCCO listed. I have no idea why they disappeared, but I think it was when the Intel Bus installed on the same IRQ, after upgrading the chipset drivers and installing the USB hub. It must have overwritten a file somewhere. Where? I don't know. IF I do happen to find a solution to this I will make sure and post it, as I know there are a couple of other people here having this problem, and there hasn't been an answer posted for it yet that I am aware of. Any pointers in any direction may help.
    One more thing. I know both times the problem happened, I noticed it after playing videos from the browser, using the embedded WMP as a player. May be why there is a problem in the first place? Dunno.
    TIA
    Stretch

  • TS1702 Sometimes an app goes mute, and it is not something about the volume, it just doesn´t have any sound any more. What should I do?

    Sometimes an app goes mute, and it is not something about the volume, it just doesn´t have any sound any more. What should I do?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • ERROR: Update mode C is not supported by the extraction API - R3 11

    Hi gurus,
    I just tryed to implement the solution I found at this link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
    The data source is based on an Infoset on the KONV R/3 Table.
    I setted the AIM delta process and I did all the activities as written in the document.
    The process works if I load data to bw in "full", with "Init without data transfer" and "delta" mode. Of course if I change a Purchase document, it will be posted in the delta queue and then loaded to bw with the next delta load.
    The "initialize delta process" (with data) doesen't work and returns the following error:
    Update mode C is not supported by the extraction API
    the error code is R3 11.
    have you any idea about it???
    Thanks!!!
    Regards!
    Matteo

    Hi,
    for me it sounds quite simple. It is that the update mode 'C' get flagged as 'not allowed' for this extractor. Did you check with rsa3? I guess you will get the same error message. May be you can start debugging in rsa3 to find the place where the update mode gets checked.
    Anyway, it shouldn't be a issue as you have a workaround. May be you should raise a error message at sap because of this.
    regards
    Siggi

  • Iwlist scanning gives: Interface doesn't support sc [solved]

    When I'm trying to scan for all available networks I get:
    # iwlist eth1 scanning
    eth1 Interface doesn't support scanning : Operation not supported
    My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
    It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
    /usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
    make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
    make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
    make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
    make: *** [modules] Error 2
    So I did try the wlan-ng26 driver downloaded and installed with pacman.
    I remove the orinoco modules with
    [root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
    But when I try to insert the prism2_pci module, it doesn't exist. Why?
    [root@ArchThinkpad orjanp]# modprobe prism2_pci
    FATAL: Module prism2_pci not found.
    Any heads up on what to do?
    This is iwconfig before removing the orinoco modules.
    [root@ArchThinkpad orjanp]# iwconfig
    lo no wireless extensions.
    sit0 no wireless extensions.
    eth0 no wireless extensions.
    eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
    Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
    Tx-Power=15 dBm Sensitivity:1/3
    Retry min limit:8 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:off
    Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:0 Missed beacon:0
    This is lspci
    [root@ArchThinkpad orjanp]# lspci
    00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
    00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
    00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
    00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
    00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
    00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
    00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
    00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
    00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
    00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
    01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
    02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
    02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
    02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
    This is lsmod before removing orinoco.
    [root@ArchThinkpad orjanp]# lsmod
    Module Size Used by
    radeon 78336 1
    ohci_hcd 23048 0
    ehci_hcd 36488 0
    irtty_sir 7552 0
    sir_dev 18636 1 irtty_sir
    irda 144184 1 sir_dev
    crc_ccitt 2432 1 irda
    parport_pc 29252 0
    parport 38600 1 parport_pc
    rtc 13260 0
    pcspkr 4044 0
    eepro100 32528 0
    orinoco_pci 7552 0
    orinoco 44172 1 orinoco_pci
    hermes 9472 2 orinoco_pci,orinoco
    yenta_socket 23560 0
    rsrc_nonstatic 11648 1 yenta_socket
    pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
    snd_intel8x0m 19396 0
    snd_intel8x0 34624 0
    snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
    snd_pcm_oss 56224 0
    snd_mixer_oss 21120 1 snd_pcm_oss
    snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 27268 1 snd_pcm
    snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 10848 1 snd
    snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
    i2c_i801 8972 0
    i2c_core 23296 1 i2c_i801
    usbhid 47744 0
    uhci_hcd 33424 0
    usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
    shpchp 100996 0
    pci_hotplug 34760 1 shpchp
    tsdev 8256 0
    joydev 10560 0
    evdev 9984 0
    cpufreq_powersave 2176 0
    cpufreq_userspace 5680 0
    p4_clockmod 6164 0
    speedstep_lib 4868 1 p4_clockmod
    freq_table 5008 1 p4_clockmod
    e100 37760 0
    mii 5760 2 eepro100,e100
    nls_cp437 6144 1
    vfat 14976 1
    fat 41884 1 vfat

    orjanp wrote:
    Thanks.
    I installed the 0.15RC1 version of the Orinoco drivers found here.
    I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
    What do I have to do to update the driver?
    do you use a PKGBUILD?
    update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
    for a start, check under
    ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
    that your module is installed under the correct location (the orinoco files should be newer than the other ones)
    if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

  • On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text?

    On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text? Even if my ringer is set to high, I don't want it to make a sound when it sends my texts..can anyone help?

    Flip the Ring/Silent switch.

  • Third Party X-Fi Mode Switching Softw

    I recently ran across an issue which is documented in this thread:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=53809
    What I found out raised an interesting possibility: it should fairly easy to make software to switch modes with X-Fi sound cards. The community only needs to work together to make some third party software to get the job done.
    When modes are switched for the X-Fi, the following folder is utilized (on XP, at any rate):
    C:\Documents and Settings\All Users\Application Data\Creative\Spi\
    {00000005-00000000-00000007-000002-00000005-00202}\Modes
    The files which are involved are named as such:
    CTXFICMu.ini
    CTXFICMu.rfx
    CTXFIEMu.ini
    CTXFIEMu.rfx
    CTXFIGMu.ini
    CTXFIGMu.rfx
    The two 'CTXFICMu' files correspond to Audio Creation Mode, while the 'CTXFIEMu' files match Entertainment Mode and the 'CTXFIGMu' files match Game Mode.
    The *.ini files are text files containing mixer information for each mode, and the *.rfx files are binary files. I suspect the *.rfx files may be related to the programmable nature of the audio chip, but I haven't messed around with them too much since it is outside the scope of my abilities.
    The CTXFISPI.EXE process is making the reads and writes to these files, which seems to indicate that it does the dirty work when it comes to changing the modes of the card.
    If the community can determine how to encourage CTXFISPI.EXE to switch modes (or if Creative decides to be forthcoming with the details), then third party apps can be developed to make the switch easier (tray app menu), faster (no animations), more efficient, and seamless (a scriptable method for changing modes would be great!).
    Additionally, it shouldn't be too hard to make software which allows for per user mixer settings with the X-Fi. It is only a matter of switching in a particular user's *.ini and *.rfx files to the Modes directory before CTXFISPI.EXE loads them at log in, and then saving the same files again at log off.
    So, I have a request for Creative: would you please release some documentation about how to switch modes programmatically or even from the command line?
    I'm also throwing out this challenge to the community: if Creative is unable or unwilling to release the information needed, then let's get under the hood of the X-Fi and decode mode switching ourselves. If someone can expose how mode switching works, then I would be more than happy to whip up an interface for it.
    Drailex_Mauder

    I have created a quick fix for the lack of mode switching options currently available. I would like to program something more feature rich in C, but for now VBScript is better than nothing. If we don't get a leg up from Creative, it may be a while as I will have to look into reverse engineering the software. This would require learning some new skills on my part.
    These scripts work by loading the Creative Audio Console and pushing the appropriate keystrokes to change the mode. It is a dirty way to get the job done, but until more is known about how to change modes through CTXFISPI.EXE these scripts will have to do.
    I am releasing these scripts under a BSD licence, which appears at the end of this message. Kinda silly for such small blocks of code, but it's there more to cover my assets with the legal disclaimer than anything else.
    Copy each block of code into a separate text file and make sure that the file name ends in a VBS extension. Any up to date 2000 or XP machine should run these scripts no problem. I have placed shortcuts to the scripts in my Quick Launch Toolbar so that I can quickly change modes.
    You could also add them to a script which switches to game mode, runs your game, and then switches back to entertainment mode.
    VERY IMPORTANT: The Creative Audio Console must not be running when you run one of these scripts, otherwise the script will randomly change your settings.
    And once again, if anyone can assist in determining how to coax CTXFISPI.EXE into switching modes, this will take things a long way to creating 3rd party mode switching software which meets the goals of my original post in this thread.
    ----- Start Of "Entertainment Mode.vbs" -----
    Option Explicit
    Dim WshShell
    Set WshShell = CreateObject("WScript.Shell" )
    ' Start up the Audio Console
    WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
    WshShell.Run("CTAudCS.exe" )
    ' On slower machines the Sleep value may need to be increased.
    WScript.Sleep(500)
    ' Send the keystrokes to change the mode
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{RIGHT}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{ENTER}" )
    WScript.Quit(0)
    ----- End Of "Entertainment Mode.vbs" -----
    ----- Start Of "Game Mode.vbs" -----
    Option Explicit
    Dim WshShell
    Set WshShell = CreateObject("WScript.Shell" )
    ' Start up the Audio Console
    WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
    WshShell.Run("CTAudCS.exe" )
    ' On slower machines the Sleep value may need to be increased.
    WScript.Sleep(500)
    ' Send the keystrokes to change the mode
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{RIGHT}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{DOWN}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{ENTER}" )
    WScript.Quit(0)
    ----- End Of "Game Mode.vbs" -----
    ----- Start Of "Audio Creation Mode.vbs" -----
    Option Explicit
    Dim WshShell
    Set WshShell = CreateObject("WScript.Shell" )
    ' Start up the Audio Console
    WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
    WshShell.Run("CTAudCS.exe" )
    ' On slower machines the Sleep value may need to be increased.
    WScript.Sleep(500)
    ' Send the keystrokes to change the mode
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{RIGHT}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{UP}" )
    WshShell.SendKeys("{DOWN}" )
    WshShell.SendKeys("{DOWN}" )
    WshShell.SendKeys("{TAB}" )
    WshShell.SendKeys("{ENTER}" )
    WScript.Quit(0)
    ----- End Of "Audio Creation Mode.vbs" -----
    * Copyright (c) 2006 Breen Ouellette
    * Redistribution and use in source and binary forms, with or without
    * modification, are permitted provided that the following conditions are met:
    * . Redistributions of source code must retain the above copyright notice,
    * this list of conditions, and the following disclaimer.
    * 2. Redistributions in binary form must reproduce the above copyright notice,
    * this list of conditions, and the following disclaimer in the documentation
    * and/or other materials provided with the distribution.
    * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
    * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
    * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
    * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
    * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
    * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
    * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
    * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
    * THIS SOFTWARE, EVEN IF IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Message Edited by Drailex_Mauder on 03-4-20060:35 PM
    Message Edited by Drailex_Mauder on 03-4-20060:56 PM

  • I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

    I cannot activate a ringtone which I prepared with Iringer. It appears in iTunes under sounds but doesn't appear in sounds on the iPhone!!!

    if you created a ringtone, it should appear in the tone menu in itunes.
    Is the ringtone 30 seconds or less?
    Also I would check the iringer support site to resolve your issue.

Maybe you are looking for