Mode switching software did not inst

I have the X-FI XtremeMusic. My system specs are these:
Athlon 64 3700+ (Clawhammer)
Asus K8V Deluxe (Bios 0)
Windows XP Professional Sp
Corsair 024mb PC3200 RAM
ATI X800 Pro
X-FI XtremeMusic + Creative 5. Spkrs
Antec TruePower 550 PSU
I have loaded the software that was on the installation CD's twice now. The only apps I have available are the Media Player and the Organizer.
I'm not getting any other apps to load. The mode switching is nowhere to be found.
Any help in getting the remaining mediasource apps and mode switching to install would be appreciated.Message Edited by marlue on 0-4-2005 05:39 PM

I sorted out this issue. I downloaded and installed the driver and audio console updates from the Creative download page and all is well.

Similar Messages

I recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help

I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this.

HT1976 I have purchased the device was the work of Yvonne Software did not know that the inside account Cloud I do not know what email I do not know bass Bord please help me thank you

I have purchased the device was the work of Yvonne Software did not know that the inside account Cloud I do not know what email I do not know bass Bord please help me thank you

khalid alawad wrote:
I was in Saudi Arabia and I have been working with the man in the shop for buying and selling devices and the cases of Financial does not allow me lossy money, because I bought more than one device Avon and one of them that you see above, and I have a number 7 Yvonne 5 and 8 Avon 4 I do not want Mabdakhal iPhone but to activate and sell and not Tgrima money please, I want solution and good luck to you my best wishes and please, I want to help me for my loss not to the owner of the shop who work LED \ Ye would have lost my job and my money thank you
You are making little sense. Antonio's answer still stands.

My windows software did not pass genuine validation process. how can i validate it?

am using windows xp and there is an alert that my computer might be at risk because my software did pass genuine validation process. how can i help this?

hello, this is a support forum for the mozilla firefox web-browser. we cannot help you with any problems regarding the validatiobn of your windows copy. please contact the microsoft support channels mentioned in the alert...
a not related issue that also needs your attentions: from the system details that you've submitted it appears as you are using a very outdated version of firefox - there are [http://www.mozilla.org/security/known-vulnerabilities/firefox.html dozens of very critical security vulnerabilities] in firefox 5. please update to the latest firefox version 13 as soon as possible & also do a check of your plugins.
www.getfirefox.com
https://www.mozilla.org/plugincheck/

Safari not finding servers; reloading software did not help

This problem started with one of the security updates about 4 weeks ago. I have been on the phone with Apple, reloaded the software, and nothing works. Other browsers connect fine.
Seems others have had this same problem. Any good solutions OTHER than cleaning my harddrive and starting over. I refuse to do that for a web browser that should work.

I am having the same problem. I cannot even log onto these discussion boards using Safari. I have no problem with Omniweb, Camino, or Firefox. I also have not had any problems before the last few weeks, and I have not installed any relevent third party applications that would effect the network. The only thing I can think of is one of the recent Apple updates somehow knocked Safari out.
The problem only seems to occur with http sites. For instance, for the discussions boards I get the folllowing error:
https://support.apple.com/cgi-bin/WebObjects/ACAuthWeb.woa/wa/login?appIdKey=2dd bca23a85d20e5bf7478812379ae23&path=/login.jspa%3FsuccessURL%3D%2Fpost%21reply.js pa%3FmessageID%3D4459459
I have repaired permissions. I used Disk Utilitiy. I used TechToolPro. Nothing works. Besides reinstalling the OS, any clues?
Power Mac Mac OS X (10.4.9)

Third Party X-Fi Mode Switching Softw

I recently ran across an issue which is documented in this thread:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=53809
What I found out raised an interesting possibility: it should fairly easy to make software to switch modes with X-Fi sound cards. The community only needs to work together to make some third party software to get the job done.
When modes are switched for the X-Fi, the following folder is utilized (on XP, at any rate):
C:\Documents and Settings\All Users\Application Data\Creative\Spi\
{00000005-00000000-00000007-000002-00000005-00202}\Modes
The files which are involved are named as such:
CTXFICMu.ini
CTXFICMu.rfx
CTXFIEMu.ini
CTXFIEMu.rfx
CTXFIGMu.ini
CTXFIGMu.rfx
The two 'CTXFICMu' files correspond to Audio Creation Mode, while the 'CTXFIEMu' files match Entertainment Mode and the 'CTXFIGMu' files match Game Mode.
The *.ini files are text files containing mixer information for each mode, and the *.rfx files are binary files. I suspect the *.rfx files may be related to the programmable nature of the audio chip, but I haven't messed around with them too much since it is outside the scope of my abilities.
The CTXFISPI.EXE process is making the reads and writes to these files, which seems to indicate that it does the dirty work when it comes to changing the modes of the card.
If the community can determine how to encourage CTXFISPI.EXE to switch modes (or if Creative decides to be forthcoming with the details), then third party apps can be developed to make the switch easier (tray app menu), faster (no animations), more efficient, and seamless (a scriptable method for changing modes would be great!).
Additionally, it shouldn't be too hard to make software which allows for per user mixer settings with the X-Fi. It is only a matter of switching in a particular user's *.ini and *.rfx files to the Modes directory before CTXFISPI.EXE loads them at log in, and then saving the same files again at log off.
So, I have a request for Creative: would you please release some documentation about how to switch modes programmatically or even from the command line?
I'm also throwing out this challenge to the community: if Creative is unable or unwilling to release the information needed, then let's get under the hood of the X-Fi and decode mode switching ourselves. If someone can expose how mode switching works, then I would be more than happy to whip up an interface for it.
Drailex_Mauder

I have created a quick fix for the lack of mode switching options currently available. I would like to program something more feature rich in C, but for now VBScript is better than nothing. If we don't get a leg up from Creative, it may be a while as I will have to look into reverse engineering the software. This would require learning some new skills on my part.
These scripts work by loading the Creative Audio Console and pushing the appropriate keystrokes to change the mode. It is a dirty way to get the job done, but until more is known about how to change modes through CTXFISPI.EXE these scripts will have to do.
I am releasing these scripts under a BSD licence, which appears at the end of this message. Kinda silly for such small blocks of code, but it's there more to cover my assets with the legal disclaimer than anything else.
Copy each block of code into a separate text file and make sure that the file name ends in a VBS extension. Any up to date 2000 or XP machine should run these scripts no problem. I have placed shortcuts to the scripts in my Quick Launch Toolbar so that I can quickly change modes.
You could also add them to a script which switches to game mode, runs your game, and then switches back to entertainment mode.
VERY IMPORTANT: The Creative Audio Console must not be running when you run one of these scripts, otherwise the script will randomly change your settings.
And once again, if anyone can assist in determining how to coax CTXFISPI.EXE into switching modes, this will take things a long way to creating 3rd party mode switching software which meets the goals of my original post in this thread.
----- Start Of "Entertainment Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Entertainment Mode.vbs" -----
----- Start Of "Game Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Game Mode.vbs" -----
----- Start Of "Audio Creation Mode.vbs" -----
Option Explicit
Dim WshShell
Set WshShell = CreateObject("WScript.Shell" )
' Start up the Audio Console
WshShell.CurrentDirectory = "C:\Program Files\Creative\AudioCS"
WshShell.Run("CTAudCS.exe" )
' On slower machines the Sleep value may need to be increased.
WScript.Sleep(500)
' Send the keystrokes to change the mode
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{RIGHT}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{UP}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{DOWN}" )
WshShell.SendKeys("{TAB}" )
WshShell.SendKeys("{ENTER}" )
WScript.Quit(0)
----- End Of "Audio Creation Mode.vbs" -----
* Copyright (c) 2006 Breen Ouellette
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* . Redistributions of source code must retain the above copyright notice,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions, and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Message Edited by Drailex_Mauder on 03-4-20060:35 PM
Message Edited by Drailex_Mauder on 03-4-20060:56 PM

I want to close the bokkmarks side bar, I have tried to open firefox in safe mode but this does not help.

This morning I opened firefox as usual and found that a sidebar for bookmarks on the left side of this page. I did not request this to open and I want it removed from my computer. I do not like the way it uses up the space on the page. I have tried to open firefox in safe mode but his did not clear it. If I can not remove this sidebar I will want to close firefox.

There should be a little 'x' Close button in the top right corner of the sidebar.
Alternatively, Ctrl + B will close it too.

I tried updating software on my iphone and it did not work. My handset has had the picture of the usb cable asking to connect to itunes for hours and i can not switch my phone off or reset it. Please help!

I tried updating iphone software and it did not work. It just shows connect to itunes with usb cable on the handset. I have tried for hours to try and turn the hanset off and troubleshoot but nothing works. The connect to itunes display can not be over-ridden.
Please help!!!

oh and the device is not being recognised by itunes now either.

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

TS4510 Updating to the latest iOS on my iphone 5 did not resolve this issue, I have had to switch it off

Updating to the latest iOS on my iphone 5 did not resolve this issue, the only way I've found round it is to switch the mode off

Do Not Disturb mode stays on after scheduled time

Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

Hello，everyone.
I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
I download .bit file to FPGA and succeed.
When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
and the process is about 68% it fails.
The message below the IMapct is as belows:
done.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
'1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
INFO:iMPACT - Current time: 2014/3/13 8:48:14
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': Programming device...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:188 - '1': Programming completed successfully.
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     23 sec.
Selected part: XCF128X
// *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
// *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
INFO:iMPACT - Current time: 2014/3/13 8:49:32
// *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
PROGRESS_START - Starting Operation.
Maximum TCK operating frequency for this device chain: 66000000.
Validating chain...
Boundary-scan chain validated successfully.
INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C > 120.00C]
1: Device Temperature: Current Reading: 230.52 C, Max. Reading: 230.52 C
1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
'1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
'1': Downloading core...
Match_cycle = NoWait.
Match cycle: NoWait
LCK_cycle = NoWait.
LCK cycle: NoWait
done.
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
INFO:iMPACT:2492 - '1': Completed downloading core to device.
Current cable speed is set to 6.000 Mhz.
Cable speed is default to 3Mhz or lower for BPI operations.
Current cable speed is set to 3.000 Mhz.
Setting Flash Control Pins ...
Setting Configuration Register ...
Populating BPI common flash interface ...
Common Flash Interface Information Query completed successfully.
INFO:iMPACT - Common Flash Interface Information from Device:
INFO:iMPACT - Verification string: 51 52 59
INFO:iMPACT - Manufacturer ID:        49
INFO:iMPACT - Vendor ID:             01
INFO:iMPACT - Device Code:           18
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Erasing device...
'1': Start address = 0x00000000, End address = 0x008CE03B.
done.
'1': Erasure completed successfully.
Setting Flash Control Pins ...
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
INFO:iMPACT - Using Word Programming.
'1': Programming Flash.
done.
Setting Flash Control Pins ...
'1': Flash Programming completed successfully.
Using x16 mode ...
Setting Flash Control Pins ...
Setting Configuration Register ...
'1': Reading device contents...
done.
'1': Verification completed.
Setting Flash Control Pins ...
Current cable speed is resumed to 6.000 Mhz.
'1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
`Elapsed time =    814 sec.
and i find many people have met the same thing. But they are spartan series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
I have read the status Registers and find there is an over-temperature state
and in Impact i could not readback the registers. It is strange.
I am anxious about this problem and have not solved it yet
What reasons may it be?
Hope for your answer, thank you

Hi~I want to know if you solve the configuration problem for virtex-6?
As I encounter the  same configuration problem, I want to consult  you with some question.
Can I have your email?
gszakacs wrote:
I have measured the VCCINT and find it is 1.0V, not 2.997V;
That is not at all surprising. I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
my Reference board is ML605
That would have been nice to know at the beginning...
It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide. See table 1-27, table 1-33 and the note below it about switch S1.
I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA. Have you tried power-cycling to see if the FPGA boots from the flash?
I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that). That will not only show the bits of the configuration status register, but also describe what each bit means. Among other things you can check the state of the FPGA's configuration logic and the Mode pins.

I plugged IPOD in to sync ( first time in over a year) it auto started with the "Do Not Disconnect", but did not sync. Now the IPOD is stuck in that mode, won't shut off, won't sync, won't work. is there a way to reboot it?

I plugged IPOD in to sync ( first time in over a year) it auto started with the "Do Not Disconnect", but did not sync. Now the IPOD is stuck in that mode, won't shut off, won't sync, won't work. is there a way to reboot it?

It has already been 6 days from your post, my apology for responding so late, but it is my habit to help only the leftovers, which the other contributors missed.
Toggle the hold switch make sure there is no red showing.
To reboot an iPod. (Or RESET in Apple iPod jargon)
Press Menu and Center button for about 10 secs till the Apple logo comes ON , this would not erase any data from your iPod.
I would advice you to leave the iPod charging for about 4 hours, if it has been discharged for 1 year or more, and also Apple recommends that you charge the iPod at least once a month, to prevent a discharged battery leakage, which may corrrode the circuitry in the iPod.
Hopefully you don't get the dreaded RED X on the iPod screen.
Good Luck!

My MacBook pro did not restart after the software update

My MacBook pro did not restart after the software update

Kappy wrote:
Now, were I a mindreader this wouldn't be an issue, but unfortunately, I'm not.
WHAT??? Now that's a disappointment! I was sure the all-seeing, all-knowing Prof. Kappy would instantly discover the problem thru time and space....
Ok, back to the issue at hand, the Prof. is right. In none of the OP's participation, nor in any of his choir of followers save mommy power is there the least hint of what Apple product is failing. While y'all get a move on and disgorge the details, may want to try a Safe Boot. Hold down the Shift key prior to the startup chime and wait awhile. IF it starts, then it means you have some third-party software that's causing the problem. Else there's a strong probability a complete reinstall will occur in your near future.
In the future and in spite of what some purists may say, be sure to service the system disk BEFORE patching. By "service" I mean booting up the Mac using your Install DVD (Snow Leopard or priors) or booting in Recovery Mode (Command R, in the Lions and successors), running the Disk Utility found in that mode and doing a Repair Disk and Repair Disk Permissions. Until NO errors show up. Cause patching up an already damaged system will only make things worse.

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Mode switching software did not inst

Similar Messages

Maybe you are looking for