Model 15-d006TU all driver link for windows 7

plz plz plz
model 15-d006TU all  driver link for windows 7

Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere.

Similar Messages

  • T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

    I just reinstalled a T60 from scratch TWICE  to the point of updating  - Intel Wireless Wifi Link for Windows XP -
    Just after that very latest Update (3.1.1.1 or so?)  there is no WLAN possible and I had to find out, that  a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
    I have a full backup done by acronis 2010 so that does not bother me so very much.
    The point is that I like to WARN everybody to install that Update to their T60  e.g. 2008YWJ !!!
    (contains 3945AGB WLAN Module!)
    After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature 
    szAppName: AcSvc.exe  szAppVer: 5.6.1.33  szModName: PfMgrApi.dll
    szModVer : 13.0.0.2  offset: 000d4912
    and the System wants to report that stuff to MicroSoft...again and again...every time u
    start AccessConnections.
    U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
     and REinstall it....just 2 get the same messages and NO WLAN anymore.
    I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
     I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
    automagically...;-(((
    And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
    Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
    really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
    Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
    (I could  not use that Thinkvantage-System Recovery because it did not even get all its updates by the 
    time the system went in limbo during install! What i defintely can say is that it breaks at exactely
    same point when Intel Wifi Updates is installed...
    I do my Acronis Restore now and try 2 avoid this Update....;-(
    if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
    I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and  NEVER
    experienced problems like this in many  years!
    cheers
        GAL9000

    gal9000, welcome to the forum,
    have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
    Hope this helps.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • HP 6600 Scan\Print Driver Issue for Windows 7 Profession​al 64 bit

    Hello,
    For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
    The problem:
    Printing:  Currently receiving an "Error - Offline" message in my printer queue at all times.
    Scanning:  Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
    Things I have tried:
    Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
    Uninstalled Drivers from CD-ROM, re-installed, countless times
    Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
    Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
    Installed Drivers and finding the printer myself through it's own static IP address.
    Turned off firewall and attempted to print (after reboot), same errors
    Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
    Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
    Things I have not tried:
    Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
    Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
    You tell me
    Curiosities:
    I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
    Weird that it is not recognizing the model number.
    Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
    Theories:
    I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
    Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that. 
    Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

    Hi Zerosouls,
    I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
    First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing Hp Officejet 6600 again.
    Please let me know what happens
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Portal drive software for Windows 7 (64-bit)

    Hi...Experts
    We could not find the portal drive software for Windows 7 (64-bit) OS on service market place. The one which is available on market place is working fine for Windows 7 (32-bit ) but it does not work for 64-bit.
    Can any one help us to get the 64-Bit Portal Drive
    Rgds
    PR

    1- Set BasicAuthLevel's value to "2"  by expand HKEY_LOCAL_MACHINE >> SYSTEM>>CurrentControlSet>>Services>>webClient>>Parameters
    2- Restart your computer.
    3- Right click "Computer" and click "Map network drive..."
    To Letter Field: Set a free drive letter.
    To Folder Field: Assume that your webDav address is http://abc.com:50000/irj/go/km/docs/ change it to
    abc.com:50000irjgokmdocs
    4- Enter your ID an Password
    thats all...
    Note: The mapping is as follows:
    0 - Basic authentication disabled
    1 - Basic authentication enabled for SSL shares only
    2 or greater - Basic authentication enabled for SSL shares and for non-SSL shares

  • HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

    I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

    Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
    I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
    Thanks to BobTheFisherman for the link.
    There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
    Give it a try. You might like it or it may not be your cup of tea.

  • HP Deskjet Ink Advantage K209 All-in-One for Windows 10 64 bit.

    Hello, Is there already a new HP Deskjet Ink Advantage K209 All-in-One for Windows 10 64 bit. I Was looking and what I only found is: HP Printer Install Wizard for Windows and HP Print and Scan Doctor for Windows. Will be appreciate for help. M.

    Hi , Welcome to the HP Forums! I noticed that you are wondering if their is a driver for Windows 10 for your HP Deskjet Ink Advantage K209. I am happy to take a look for you!  As far as I can tell, the only software items available, are the ones you already mentioned. The HP Print and Scan Doctor, and the HP Printer Install Wizard for Windows. So if you are looking to install your printer, I would suggest trying the HP Printer Install Wizard for Windows. Hope this answers your question, and have a nice day!  “Please click the Thumbs up icon below to thank me for responding.”

  • SCCM Driver Packs for Windows 8

    We have several SCCM driver packs for Windows 8 available now...
    ThinkPad L430, L530
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_l430-l530_w864_201210.exe
    ThinkPad T430(s,i), T530(i), W530
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_t430x-t530x-w530x_w864_201210.exe
    ThinkPad X1 Carbon
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x1carbon_w864_201210.exe
    ThinkPad X131e
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x131e_w864_201210.exe

    Adding X230
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w832_201210.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/tp_x230x_tablet_w864_201210.exe

  • How can I save a page with all the links for offline reading

    how can I save a page with all the links for offline reading

    Maybe '''Pocket''' is what you want?
    [https://addons.mozilla.org/en-US/firefox/addon/read-it-later/?src=search Pocket (Mozilla Addons)]

  • Driver HP Deskjet F2200 All-in-One for Windows 98

    Hello!
    I have printer HP Deskjet F2200 All-in-On and I need driver for Windows 98. Where I can find this driver? If is not it present, is it possible to do something?
    Thank you

    Hi,
    lick Start ( ), and then click Control Panel .
    Double-click Add/Remove Programs . In the list of installed programs, click your HP printer, and then click Add/Remove .
    Follow the on-screen instructions to complete the software and select the printer Deskjet 990C and complete the installation. Since we don't have Wind 98 software for the printer any more
    I work for HP but my posts and replies are my own.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Nvidia Geforce 650m driver problem for windows 8.1 on macbook pro

    Hey guys. I installed windows 8.1 on my macbook pro (mid2012, Intel core i7, retina, Geforce 650m) of course only for game, but I have a disappointing problem with the graphics driver. First I tried to instal graphics card driver by bootcamp (not the last version, the one before the last) .It started to install drivers one by one starting with graphics card, but suddenly the screen got black and remained black forever! I restarted the windows and guess what! after windows logo it got black and nothing more! Then I installed windows again and tried to install driver from windows update. It checked for update and found the driver for it and downloaded it and started to install, but again the black screen !!! Please help me thanks.

    DemetriAA wrote:
    no this does not work. bootcamp drivers are broken for windows 8.1 on an efi install. apple is withholding the discreet gpu drivers from microsoft to trick people into thinking osx is more stable/efficient and thus windows cannot detect which gpu it is supposed to use when it can see both. the discreet gpu is hidden in the fake bios setup that bootcamp wants you to install with. the problem with doing this is that the more powerful gpu is all you can use in windows so the computer runs more hot and is louder which is annoying and hard on the battery life.
    thanks apple, if i knew that when i bought the laptop i would have gone with something else.
    This is not correct. If you force an EFI installation on a preUEFI Mac, you will see GPU and Audio errors. A non-EFI Hybrid MBR installation works correctly. Does Windows have the ability to switch GPUs? OS X, using external monitors, uses the non-Intel discreet GPU and the machine does not run hot. If Windows can provide dual-GPU support (which they have) and also provide GPU-switching (missing), this can be done. Can it be done for older hardware, highly unlikely. MacRumors has threads with PCI Register changes to expose the Intel GPU and the machine still runs hotter.
    From Bootcamp Info.plist...
           <key>PreUEFIModels</key>
            <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
            </array>
    You can verify your Model Identifier from How to identify MacBook Pro models - Apple Support. The 2012 MBPs are 9,x models.

  • UPD driver (PCL6) for Windows 7 x64 client machines installed on a Server 2003 x32 server.

    Hi,
    We have CP1515 LaserJet printers run over TCP/IP from our Servers which run Server 2003 (32 bit).
    We have recently bought some new PCs running Windows 7 Pro 64 bit edition.
    How do I get the Win 7 x64 machines to use the printers served via the Server 2003 x32 machine ?
    All my attempts to install the software (pcl6-x??-5.3.1.10527) on either the Server2003 or Win 7 x64 machine fails.
    The EXE (pcl6-x64-5.3.1.10527) file won't run on Server2003 - I'm guessing because it expects an x64 operating system.
    The EXE (pcl6-x32-5.3.1.10527) file runs on Server2003, but doesn't seem to do anything - I'm guessing because there is already an x32 driver.
    When I use the ‘Additional Drivers’ option in the printer properties to an x64 driver, none of the supplied .INF files inside the expanded EXE are considered suitable.
    The EXE (pcl6-x64-5.3.1.10527) runs on Win7 x64 machine, but when I select the existing printer on Server2003, it says it can't find the driver - which is ridiculous as I'm installing the driver!
    I can get the EXE pcl6-x64-5.3.1.10527 to complete on the Win 7 machine if specifying a completely new printer queue (by supplying the IP address).  However not only is this not satisfactory as it bypasses the required security and defaults on the server queue, but also it frustratingly then 'forgets' it had a perfectly good driver when I try and subsequently add the server printer queue.
    I’ve run out of ideas.  Can anyone help ?
    Thanks,
         Stuart Poore

    Hi
    I had this trobule too.  Below is the instructions to install driver.  Disconnect your printer. In printers select add printer.  Then click windows update (need internet) allow them to update and then select 1220c printer to install leaving as standard old port.  Once installed go into printer properites and update to USB port.
    Bingo it works!
    Refer to the below link for full instructions.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_track_link=ot_recdoc/c01874792/en_...
    Good luck
    RB

  • PnP Driver, NVIDIA, for Windows 8

    In need of some serious assistance.  I did a clean install of Windows 8 Professional on an HP Compaq Presario CQ60-215DX.  Everything went smoothly except there was one driver that didn't download with it labeled "Coprocessor".  Despite the
    driver being missing the device runs it superbly HOWEVER I keep getting 2 Important updates; Update for Windows 8 (KB2770917) and Update for Windows 8 (KB2779768).  They download with no problem but after the installation process things
    turn red and say their are Errors found, code 800073718, as well as giving a link to "Get help with this error"
    When I click this link it takes me to the link "Troubleshoot problems with installing updates," and from there "Tap or click to open the Windows Update troubleshooter."  After running this it gives two possible errors and states them fixed. I go back
    to install updates and hit try again and it says I no longer need the updates but when I check for new updates there are the same two all over again.  
    If I try to update the driver from the device properties it says it can not find one.  The Action Center, however, says it has a solution to my problem and links me to NVIDIA's web site after telling me the problem is:
    Description
    Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website.
    The hardware ID of your device is PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2.
    Problem signature
    Problem Event Name: PnPDriverNotFound
    Architecture: x86
    Hardware Id: PCI\VEN_10DE&DEV_0753&SUBSYS_360A103C&REV_A2
    OS Version: 6.2.9200.2.0.0.256.48
    Locale ID: 1033
    Extra information about the problem
    Bucket ID: 9703ab1535101f90f74cebd9d44e234e (1705665006)
    So I, of course, go there in attempt to get the driver I need for the chipset. I download to install what I discover is for Windows 7, 15.56-nforce-winvista-win7-32bit-international-whql.exe. Of course
    this is not compatible.  
    That is why I am now here. Can anyone help me figure this out please.

    To fix the Windows Update issue, I suggest you try the 'Fix it' first.
    http://support.microsoft.com/mats/windows_update/en
    I noticed that HP does not release Windows 8 compatible drivers for your computer. I suspect that the computer is not compatible with Windows 8. I suggest you contact HP support for more information.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Photosmart 7760 driver compatibility for Windows 7?

    I want to migrate from Vista to Windows 7, with a Photosmart 7760 as my primary printer. This model number is not listed in the HP Driver Compatibility Table for Windows 7. Does that mean there is no compatible driver, or is it included in another "family"?

    Hi,
    Download and run HP Printer Install Wizard from link below,
    www.hp.com/go/tools
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Wddm 1. 1 driver download for windows 7

    Hello,
    Please provide link to download WDDM 1. 1 driver for windows 7 . As currently installed driver is Intel(R) G33/G31 Express Chipset Family (Microsoft Corporation - WDDM 1.0)
    I need the same while installation of Windows Phone SDK7.1 as i got error below:
    Setup could not install the following component:
    DirectX Libraries
    Thanks.

    hello i have problem running aero on win 7 with a sis uni vga 3 graphics adapter ......... the vram is equal to 128 mb .................... please help me with any latest drivers or wddm
    monesh.lal
    There are no Windows 7 drivers for the SiS VGA graphics adapter.  It is an old and obsolete graphics adapter that is no longer supported.
    Microsoft does not write drivers for any third party hardware.  You must contact the hardware vendor/manufacturer directly for any and all updated drivers!
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • How can I transfer files off an external hard drive formatted for windows?

    I just bought my first mac (yay!) and am trying to transfer my files off of my old pc.  The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows.  My mac will open it, but it is "read only."  I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
    However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first.  Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac! 
    Any suggestions would be appreciated!  Heads up though, I am not especially computer literate, and my pc needs to stay intact as the husband needs it and some of the programs on it for school.  Also, I have a second external hard drive that is brand new with nothing on it, if that will come in handy.
    Thanks!

    Format the extra HDD to EXFAT as previously indicated.  There are two ways that can use to transferr the data. 
    1.  Connect both drives to the PC and the copy the files to the newly formatted (EXFAT) drive from the HDD with the data .  Then connect the EXFAT drive to the MBP and transfer the data to same.
    2.  Connect both drives to the MBP and open DISK UTILITY>RESTORE.  Drag the drive with the data on it to the 'Source' field.  Drag the EXFAT drive to the 'Destination' field.  Click on the 'Restore' butt is on.  After the transfer has been completed, close DISK UTILITY and place the data on the MBP where you want it.
    Ciao.

Maybe you are looking for