Model 2310 error message"test mode"

I bought a 2310 model in march2007 today I tried to switch it on in the morning and the message on the screen is "test mode" and later "local mode" what can be the problem?

18-May-200710:42 AM
mosese2007 wrote:
I tried another battery but it was giving the same message.It rained on thursday but I had the phone in the Jacket so I am not very sure wether there was some water which went through the phone.
Mosese2007
Hi mosese2007
I'm sorry but this is the most likely explanation for your problem, liquid ingress or water damage is the most common cause of local mode. The corrosion build up from liquid changes the phone's ability to "read" the battery correctly hence "local mode" comes up!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

I have a problem I can not up grade to the new AOL due to having a MAC 10.4. Now when I go on the site opens but when I finish one thing it tells me error message Offline Mode. What can i do it just shuts the internet down.

When I open Firefox , and go to AOL.com it goes to the home page with a message to up grade. I have tried that it tells me I can not do it on my operating system MAC 10.4. Now when I sign on to Aol to use my favorites some time it lets me on, but if i write something e-mail or such it sends it them tells me error message Offline mode check off in file which I do, but it shuts down the internet. I cannot get back on.

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

Client copy error in test mode

Dear all,
I am doing a client copy in test mode. Following log is generated. Please tell me solution for it.
    Log File:
devdemo\sapmnt\trans\log\CC000007.RBD
Client copy from 25.08.2008 15:43:29
System ID............................ RBD
Target client........................ 120
R/3 Release.......................... 700
Basis Support Package...............SAPKB70012
Host................................. devdemo
Start in background............. .....
User................................. SAP*
Parameter
Source destination......................PRD_300
Source system.........................PRD
Client in source system..............300
Users in source system..............RBASIS
Basis Support Package...............SAPKB70012
Copier profile:.......................SAP_ALL
Table selection
Customizing data .....................X
With application data................ X
Initialize and recreate......... X
         / |   Change documents are not copied                                                                                |
Test mode (without database update).. X
    3S3T |   Start analysis of system 15:43:29                                                                                |
/GC1/CC_EXIT_CLIENT_DELETION executed         0(        0) entries copied
Exit program /GC1/CC_EXIT_CLIENT_DELETION successfully executed 15:43:44
Table /SAPCND/CONDINDX is deleted, not copied
Table /SAPCND/CONDREF is deleted, not copied
Table /SAPCND/CONDRECS is deleted, not copied
/SAPCND/CC_EXCLUDE_TABLES executed         3(        0) entries copied
Exit program /SAPCND/CC_EXCLUDE_TABLES successfully executed 15:43:44
Unknown message with
/SAPCND/CC_GROUP_WS_AA executed         0(        0) entries copied
Runtime              0 seconds
Exit program /SAPCND/CC_GROUP_WS_AA successfully executed 15:43:45
ADDR_CLIENTCOPY_SELECT_TABLES executed        26(        0) entries copied
Runtime              1 seconds
Exit program ADDR_CLIENTCOPY_SELECT_TABLES successfully executed 15:43:47
EFG_FORM_CC_EXIT_BEFORE executed         0(        0) entries copied
Runtime              0 seconds
Exit program EFG_FORM_CC_EXIT_BEFORE successfully executed 15:43:48
Start of deletion methods for client 120
Start the deletion method for object FINB-TR-DERIVATION
End of deletion method of object FINB-TR-DERIVATION
Start the deletion method for object UCM003
End of deletion method of object UCM003
Start the deletion method for object /EACC/ARCHIVING
End of deletion method of object /EACC/ARCHIVING
Start the deletion method for object /EACC/JOURNALCC
End of deletion method of object /EACC/JOURNALCC
Start the deletion method for object /EACC/DERIVATION-1
End of deletion method of object /EACC/DERIVATION-1
Start the deletion method for object FINB-PERSIST
End of deletion method of object FINB-PERSIST
Start the deletion method for object FINB_GENERATOR
Deletion log for client 120, application 10
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application EA
0 objects registered for deletion
No errors found in simulation mode
Deletion log for client 120, application UG
0 objects registered for deletion
No errors found in simulation mode
End of deletion method of object FINB_GENERATOR
Start the deletion method for object FINB_SBU_DUMMY
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area AS deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area XP deleted on server devdemo_RBD_00
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo
Buffer FINB_S_KF_CHARS_BUFFER_KEY, area HA deleted on server devdemo_RBD_00
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo
Buffer FINB_S_SBU_BUFFER_HASH_KEY, area GN deleted on server devdemo_RBD_00
End of deletion method of object FINB_SBU_DUMMY
FINB_TR_CC_EXIT executed         0(        0) entries copied
Runtime              1 seconds
Exit program FINB_TR_CC_EXIT successfully executed 15:43:50
TPM_TRG_CCEXIT_REMOTE executed         0(        0) entries copied
Runtime              0 seconds
Exit program TPM_TRG_CCEXIT_REMOTE successfully executed 15:43:56
CLIENTCOPY_SELECT_TEXTTAB executed         3(        0) entries copied
Runtime              0 seconds
Exit program CLIENTCOPY_SELECT_TEXTTAB successfully executed 15:43:56
Table KX9RABA0000108 is deleted, not copied
Table TABADRH is deleted, not copied
Table TABADRS is deleted, not copied
Table TABADRSF is deleted, not copied
Table TABADRST is deleted, not copied
Table UCF001C is deleted, not copied
Table UCF001G is deleted, not copied
Table UCF001T is deleted, not copied
Table UCF0020 is deleted, not copied
Table UCF0021 is deleted, not copied
Table UCF0022 is deleted, not copied
Table UCF0023 is deleted, not copied
Table UCF002C is deleted, not copied
Table UCF002T is deleted, not copied
Table UCF0032 is deleted, not copied
Table UCF003C is deleted, not copied
Table UCF003G is deleted, not copied
Table UCF003T is deleted, not copied
Table UCF0040 is deleted, not copied
Table UCF0041 is deleted, not copied
Table UCF0042 is deleted, not copied
Table UCF0043 is deleted, not copied
Table UCF004C is deleted, not copied
Table UCF004T is deleted, not copied
Table UCF1000 is deleted, not copied
Table UCF1001 is deleted, not copied
Table UCF1002 is deleted, not copied
Table UCF2300 is deleted, not copied
Table UCF2301 is deleted, not copied
Table UCF2310 is deleted, not copied
Table UCF2311 is deleted, not copied
Table UCF3000 is deleted, not copied
Table UCF3001 is deleted, not copied
Table UCF3010 is deleted, not copied
Table UCF4000 is deleted, not copied
Table UCF4001 is deleted, not copied
Table UCF4002 is deleted, not copied
Table UCF5000 is deleted, not copied
Table UCF5001 is deleted, not copied
Table UCF5002 is deleted, not copied
Table UCF5010 is deleted, not copied
Table UCF600C is deleted, not copied
Table UCF6010 is deleted, not copied
Table UCF6020 is deleted, not copied
Table UCF6030 is deleted, not copied
Table UCF6050 is deleted, not copied
Table UCF6100 is deleted, not copied
Table UCF6110 is deleted, not copied
Table UCF6120 is deleted, not copied
Table UCF6130 is deleted, not copied
Table UCF6140 is deleted, not copied
Table UCF6150 is deleted, not copied
Table UCF6160 is deleted, not copied
Table UCF6170 is deleted, not copied
Table UCF6180 is deleted, not copied
Table UCF6200 is deleted, not copied
Table UCF620C is deleted, not copied
Table UCF620T is deleted, not copied
Table UCF6210 is deleted, not copied
Table UCF6300 is deleted, not copied
Table UCF6310 is deleted, not copied
Table UCF7100 is deleted, not copied
Table UCF7101 is deleted, not copied
Table UCF7102 is deleted, not copied
Table UCF7110 is deleted, not copied
Table UCF7300 is deleted, not copied
Table UCF7400 is deleted, not copied
Table UCF7410 is deleted, not copied
Table UCF7500 is deleted, not copied
Table UCF900C is deleted, not copied
Table UCF9010 is deleted, not copied
Table UCFE01T is deleted, not copied
Table UCFE020 is deleted, not copied
Table UCFE02T is deleted, not copied
Table UCFE03G is deleted, not copied
Table UCFE03T is deleted, not copied
Table UCFE04G is deleted, not copied
Table UCFE04T is deleted, not copied
Table UCFE050 is deleted, not copied
Table UCFE05G is deleted, not copied
Table UCFE05T is deleted, not copied
Table UCFE060 is deleted, not copied
Table UCFE06G is deleted, not copied
Table UCFE06T is deleted, not copied
Table UCFE070 is deleted, not copied
Table UCFE080 is deleted, not copied
Table UCFE081 is deleted, not copied
Table UCFI00C is deleted, not copied
Table UCFI10T is deleted, not copied
Table UCFI200 is deleted, not copied
Table UCFI210 is deleted, not copied
Table UCFT000 is deleted, not copied
Table UCFT001 is deleted, not copied
Table UCFT002 is deleted, not copied
Table UCFV000 is deleted, not copied
Table UCFV200 is deleted, not copied
Table UCFV201 is deleted, not copied
Table UCFV202 is deleted, not copied
Table UCFV20G is deleted, not copied
Table UCFV21G is deleted, not copied
Table UCFV21T is deleted, not copied
Table UCFV220 is deleted, not copied
Table UCFV22T is deleted, not copied
Table UCI1101 is deleted, not copied
Table UCI1201 is deleted, not copied
Table UCI2100 is deleted, not copied
Table UCL2011 is deleted, not copied
Table UCL201G is deleted, not copied
Table UCL201T is deleted, not copied
Table UCM0010 is deleted, not copied
Table UCM0011 is deleted, not copied
Table UCM0012 is deleted, not copied
Table UCM0013 is deleted, not copied
Table UCM0014 is deleted, not copied
Table UCM0015 is deleted, not copied
Table UCM0016 is deleted, not copied
Table UCM001T is deleted, not copied
Table UCM002C is deleted, not copied
Table UCM002T is deleted, not copied
Table UCM0030 is deleted, not copied
Table UCM0031 is deleted, not copied
Table UCM0032 is deleted, not copied
Table UCM0033 is deleted, not copied
Table UCM003C is deleted, not copied
Table UCM003T is deleted, not copied
Table UCM1000 is deleted, not copied
Table UCM1001 is deleted, not copied
Table UCM100G is deleted, not copied
Table UCM100T is deleted, not copied
Table UCM600C is deleted, not copied
Table UCM600T is deleted, not copied
Table UCMA100 is deleted, not copied
Table UCMA101 is deleted, not copied
Table UCMA10C is deleted, not copied
Table UCMA10T is deleted, not copied
Table UCMI100 is deleted, not copied
Table UCMI10C is deleted, not copied
Table UCMI10T is deleted, not copied
Table UCMI200 is deleted, not copied
Table UCMI210 is deleted, not copied
Table UCMI220 is deleted, not copied
Table UCMT010 is deleted, not copied
Table UCMT01C is deleted, not copied
Table UCMT01T is deleted, not copied
Table UCMT100 is deleted, not copied
Table UCMT10C is deleted, not copied
Table UCMT10T is deleted, not copied
Table UCMV01T is deleted, not copied
Table UCRX01C is deleted, not copied
Table UCRX02G is deleted, not copied
Table UCS0100 is deleted, not copied
Table UCS0102 is deleted, not copied
Table UCS0103 is deleted, not copied
Table UCS0104 is deleted, not copied
Table UCS0105 is deleted, not copied
Table UCS0106 is deleted, not copied
Table UCS0107 is deleted, not copied
Table UCS0108 is deleted, not copied
Table UCS010T is deleted, not copied
Table UCS0110 is deleted, not copied
Table UCS01A0 is deleted, not copied
Table UCS01A1 is deleted, not copied
Table UCS01A2 is deleted, not copied
Table UCS01A3 is deleted, not copied
Table UCS020T is deleted, not copied
Table UCT100G is deleted, not copied
Table UCT100T is deleted, not copied
Table UCT101C is deleted, not copied
Table UCT101T is deleted, not copied
Table UCT2001 is deleted, not copied
Table UCT200G is deleted, not copied
Table UCT200T is deleted, not copied
Table UCT2010 is deleted, not copied
Table UCT2011 is deleted, not copied
Table UCT2012 is deleted, not copied
Table UCT2013 is deleted, not copied
Table UCT2014 is deleted, not copied
Table UCT2015 is deleted, not copied
Table UCT2016 is deleted, not copied
Table UCT3000 is deleted, not copied
Table UCT300G is deleted, not copied
Table UCT4000 is deleted, not copied
Table UCT400G is deleted, not copied
Table UCT8000 is deleted, not copied
Table UCT800G is deleted, not copied
Table UCT8010 is deleted, not copied
Table UCT8011 is deleted, not copied
Table UCT8012 is deleted, not copied
Table UCT8013 is deleted, not copied
Table UCT8014 is deleted, not copied
Table UCT8015 is deleted, not copied
Table UCT8016 is deleted, not copied
Table UCT801G is deleted, not copied
Table UCT801T is deleted, not copied
Table /ISDFPS/CS_EXLST is convertible to the RFC system, field missing locally
Table /ISDFPS/CS_EXLST is deleted, not copied
Table AD01DLI is convertible to the RFC system, field missing locally
Table AD01DLI is deleted, not copied
Table ADRC is convertible to the RFC system, field missing locally
Table ADRC is deleted, not copied
Table AFFW is convertible to the RFC system, field missing locally
Table AFFW is deleted, not copied
Table AFIH is convertible to the RFC system, field missing locally
Table AFIH is deleted, not copied
Table AFKO is convertible to the RFC system, field missing locally
Table AFKO is deleted, not copied
Table AFPO is convertible to the RFC system, field missing locally
Table AFPO is deleted, not copied
Table AFRU is convertible to the RFC system, field missing locally
Table AFRU is deleted, not copied
Table AFRV is convertible to the RFC system, field missing locally
Table AFRV is deleted, not copied
Table AFVC is convertible to the RFC system, field missing locally
Table AFVC is deleted, not copied
Table ASMD is convertible to the RFC system, field missing locally
Table ASMD is deleted, not copied
Table AUFK is convertible to the RFC system, field missing locally
Table AUFK is deleted, not copied
Table AUFM is convertible to the RFC system, field missing locally
Table AUFM is deleted, not copied
Table CEZP is convertible to the RFC system, field missing locally
Table CEZP is deleted, not copied
Table CHVW is convertible to the RFC system, field missing locally
Table CHVW is deleted, not copied
Table CHVW_INC is convertible to the RFC system, field missing locally
Table CHVW_INC is deleted, not copied
Table CKIS is convertible to the RFC system, field missing locally
Table CKIS is deleted, not copied
Table CPZP is convertible to the RFC system, field missing locally
Table CPZP is deleted, not copied
Table CRFH is convertible to the RFC system, field missing locally
Table CRFH is deleted, not copied
Table EBAN is convertible to the RFC system, field missing locally
Table EBAN is deleted, not copied
Table EKBE is convertible to the RFC system, field missing locally
Table EKBE is deleted, not copied
Table EKBEH is convertible to the RFC system, field missing locally
Table EKBEH is deleted, not copied
Table EKEK is convertible to the RFC system, field missing locally
Table EKEK is deleted, not copied
Table EKES is convertible to the RFC system, field missing locally
Table EKES is deleted, not copied
Table EKET is convertible to the RFC system, field missing locally
Table EKET is deleted, not copied
Table EKKO is convertible to the RFC system, field missing locally
Table EKKO is deleted, not copied
Table EKPO is convertible to the RFC system, field missing locally
Table EKPO is deleted, not copied
Table EKRS is convertible to the RFC system, field missing locally
Table EKRS is deleted, not copied
Table EQBS is convertible to the RFC system, field missing locally
Table EQBS is deleted, not copied
Table EQUI is convertible to the RFC system, field missing locally
Table EQUI is deleted, not copied
Table EQUZ is convertible to the RFC system, field m

Well.. those don't look like errors to me... depending on what copy profile you use SAP chooses what tables to copy and what tables to delete... so basically is just letting you know which tables are not to be copied across...
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/99/0a2a8e7e2511d2a6250000e82deaaa/content.htm
Regards
Juan

All in one HP printer model J5780. error message "the cartridge on left needs replacing"

Even when using a brand new colour original HP cartridge, I get the error message on the printer "the cartidge on the left must be replaced). The printer has a red flashing light and will not reset if press ok or cancel. Only way to continue printing is to go via HP solution centre tools and choose "Diagnostice test". It then prints the test and the requested document. I have cleaned the cartridge and the points inside the printer to no avail.

I'm betting that the contacts inside the printer or on the ink cartridge are dirty. This happens over time. The document below will walk you through cleaning the contacts. Let me know what happens.
http://goo.gl/9oXc9
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Error message "test page failed to print" in windows 7 ultimate 32 bits

I have installed printer a hp deskjet 1515 in windows 7 ultimate 32 bits and it is successfully installed, however when I tried to test print out there showed message "test page failed to print. Would you like to view the print troubleshooter
for assistance?". I tried to clicked Yes and running the troubleshooter until completed but the result still the same showed the same message above when test print again.
Please need assistance how to solve this problem
Thanks
Sopyan

Hi Sopyan,
On current situation, please refer to following steps and check if help us to troubleshoot this issue.
1. Please check if use the correct printer driver and also check if need to update it.
2. Please check if firewall was enabled or third-party security application ran. Please temporarily disable them and monitor the result.
3. Please use another administrator account to logon and print again, then check if this issue still exist.
4. Please open Event Viewer and check if find some relevant events or errors.
If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Downloaded new upgrade Firefox and now can't open firefox. I get the following error message "Offline Mode Firefox is currently in offline mode and can't browse the web."

The error message says to uncheck the "work offline" menu. Where is the work offline menu?
I have a Imac and Safari works fine.

The work offline option can be found from Firefox button -> Web developer or from the menubar toolbar -> Work offline (Or at least thats what happens in Windows).
Have you any other reason for being offline; router off, firefox not dialing up or whatever. Or is security software or a firewall blocking firefox, or a network connection, or firefox setting etc set wrongly.
See also
*[[cannot connect after upgrading firefox]]
*[[options window - advanced panel]]
* [[error loading web sites]]

Hewlett Packard Ink Jet Printer Model C6180==Error Message "Replace the following empty.."

I have replaced two magenta ink cartridges but still get message: "replace the following empty ink cartridge(s) to resume printing"

This ink cartridge error message document may offer some help here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720996&tmp_task=solveCategory&cc=us&dlc=en&lc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

OFFICEJET MODEL 6310 Error message – "Reset power"

REFERENCE: HP ALL-IN-ONE MODEL 6310 PRINTER/COPIER/SCANNER/FAX –
A message received on the screen at the front control panel of the machine reads "Reset power", while all lights are flashing green.
Several attempts have been made to “reset power” by returning the machine to its original set-up, as instructed via numerous posts, both from HP Tech Support and from independent sources, but without success.
The reset procedures used were as follows:
Disconnected USB computer cable from printer. Disconnected power cable at rear of machine and at wall socket. Waited 2 minutes. Reconnected power cable directly to wall socket (not a surge protector or power bar); held down "#" and "6" buttons on the control panel simultaneously (for partial reset), and then reconnected power cable to rear of machine, holding both buttons down while doing so until screen went blank, and then released same. Machine then cycled through normal start-up process.
At the end of the process described, everything seemed normal, but within a few seconds the same "Reset power" message appeared and all lights began flashing green once again.
This same procedure was also attempted by pressing the "#" and "9" buttons simultaneously for a "Full reset", but the results have been no different; the “Reset power” message reappeared and the lights begin to flash as before.
These two procedures have been attempted at least three times in succession and the results have always been the same. If this is a defect with this particular HP model, one that can only be remedied by shipping the machine to HP for service at some unreasonable charge (the machine’s warranty has expired), then dumping it and buying a new one, either an HP model or some other more reliable make, may be the only real solution.
If anyone has a real, proven solution to the problem, to save me having to buy a new printer, please provide me with detailed instructions on how to proceed.
Thanks for your help.

Sorry for your frustration on this issue. You've already tries everything I would have you do, so my only recommendation would be to try a new power supply. Other than that, not much more i can offer you on this one.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Unmountable Boot Volume error message appears

Hi.
On monday I bought Norton Internet Security 2007 and tried to install it. I was reading a word document while I was installing it. I received an error message and was asked to restart Windows XP.
When I tried to restart Windows XP. I received a message telling me there was an error that caused Windows to shut down. The message ask me to choose between:
1.safe mode
2.safe mode with command prompt
3.last know good configuration
4.start windows normally.
I choose "start windows normally"
MS Windows XP started normally for a few seconds then instead of my normally log on page I received a blue screen with this message:
"A problem has been detected and windows has been shut down to prevent damage to your computer.
UNMOUNTABLE_BOOT_VOLUME
if this is the first time you have seen this error screen, restart your computer. If this screen appears again follow these steps.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching and shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select start up options, and then select safe mode.
Technical information:
STOP: 0x00000ED (0x80E(1E30, 0xC000031, 0X000000000) "
And the then my computer shut down and then restart in the same sequence.
IT keep repeating the sequence: error message safe mode ect ect then blue screen, shut down and restart. Again and mo matter which mode I choose. I went on online(from a borrowed computer) to research what is going on with my notebook and I still have the problem. They told me I must uninstall the software that caused the problem. My question is have can I uninstall the software when I can't reach Window's log on and hence the control panel?
I'm at my wits end. Please help.

Hi
I dont know why but it seems that your master boot sector is damage
You could try to access the repair console (boot from original windows CD and then press R)
Then try to use this command: chkdsk /p
This command should repair some sectors on the HDD. Maybe it helps.
If not then you should format the whole HDD and reinstall the OS again!

Error message while trying to install application on emulator

Hi,
I developed a midlet (called Testing.jad; it will connect to a servlet and display something on the mobile phone once launched) and I was trying to install it on the emulator.
But the installation failed and I got this error message:
Testing.jad cannot be installed because critical information between the website and the application file does not match.
I have no idea what has gone wrong. Does anyone have an idea?
Thanks in advance.

Hi,
Sorry. There was an error in my previous post. The MIDlet is called Testing.java.
I found out the problem already : )
Edited by: lily2007 on Nov 1, 2007 7:40 PM

Performance issue calling bapi po create in test mode to get error messages

Hi,
We have a report which displays in alv the purchase orders that got created in SAP, but either got blocked due to not meeting PO Release Strategy tolerances or have failed output messages .We are displaying the failed messages too.
We are looping the internal table of eban(purchase requisition) and calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production.What can be the other effecient way to get the error messages without effecting performance.
Regards,
Suvarna

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

Modeler error messages - more info not provided!

Dear Friends,
I got an error executing a planning sequence of function type 'generate combinations'.
The system messages on the top section of the modeler are :
1. first message :
"Planning function Gen Combinations ( ended with errors"
2. subsequent messages are in green (no error)
"Context information for the other messages"
3. Selection for characteristic xyz : Single value 123 (no error)
: < similar ok messages follows >
2nd Error message :
"Cannot generate combinations for MultiProvider 'AGGR_LEVEL'"
this is followed by
3rd Error message :
"Cannot generate combinations in step 'xx'"
When double clicked on these error messages in the modeler, nothing appears to show more error info.
Could you experts kindly let me know how can I find out what these errors mean , specifically:
1. For the 3rd error, how can I know what is the step 'xx' about that the system is referring to where it cannot generate combinations? Is it in the filter, char relationship, or exits?
2. For the 2nd error What does it mean cannot generate combinations for multiprovider? Could you tell me more about what this means in terms of where is the problem?
Thanks in a advance!!
regards
YHogan

Dear Gregor,
For a planning sequence using planning function of type 'generate combinations', in general does this process work in the following sequential step ? :
1. check the filter
2. generate the combination based on filtered values
or is it the other way round?
I am trying to know where the error lies since it errored so early in the process , about 3 seconds upon executing the sequence via program RSPLS_PLSEQ_EXECUTE.
I set break point on the class mentioned to no avail as the generate combinations sequence ended with error very early in the process.
I also set breakpoint on the characteristic relationship class used as well as standard variable exit include program. Also to no avail as the program errored before these stages as none of the breakpoints appeared in debug mode before the error.
The error message is " cannot generate combinations in step '04' "
Kindly could you shed more light on this error in terms of what it is referring to?
Is the problem with master data , filter or characteristic relationship?
Based on my testing done with breakpoints, seems that its not filter or characteristic relationship error.
So, does this mean master data error?
How could master data be having error?
Most characteristic relationship used are attribute types. There are 2 using classes.
Thank you in advance.
regards
YHogan
Edited by: Yohannes Hogan on Jun 20, 2008 1:03 PM

Modeler error messages - more info needed!

Dear Friends,
I got an error executing a planning sequence of function type 'generate combinations'.
The system messages on the top section of the modeler are :
1. first message :
"Planning function Gen Combinations ( ended with errors"
2. subsequent messages are in green (no error)
"Context information for the other messages"
3. Selection for characteristic xyz : Single value 123 (no error)
: < similar ok messages follows >
2nd Error message :
"Cannot generate combinations for MultiProvider 'AGGR_LEVEL'"
this is followed by
3rd Error message :
"Cannot generate combinations in step 'xx'"
When double clicked on these error messages in the modeler, nothing appears to show more error info.
Could you experts kindly let me know how can I find out what these errors mean , specifically:
1. For the 3rd error, how can I know what is the step 'xx' about that the system is referring to where it cannot generate combinations?
2. What does it mean cannot generate combinations for multiprovider? Could you tell me more about what this means in terms of where is the problem?
Thanks in a advance!!
regards
YHogan

Dear Gregor,
For a planning sequence using planning function of type 'generate combinations', in general does this process work in the following sequential step ? :
1. check the filter
2. generate the combination based on filtered values
or is it the other way round?
I am trying to know where the error lies since it errored so early in the process , about 3 seconds upon executing the sequence via program RSPLS_PLSEQ_EXECUTE.
I set break point on the class mentioned to no avail as the generate combinations sequence ended with error very early in the process.
I also set breakpoint on the characteristic relationship class used as well as standard variable exit include program. Also to no avail as the program errored before these stages as none of the breakpoints appeared in debug mode before the error.
The error message is " cannot generate combinations in step '04' "
Kindly could you shed more light on this error in terms of what it is referring to?
Is the problem with master data , filter or characteristic relationship?
Based on my testing done with breakpoints, seems that its not filter or characteristic relationship error.
So, does this mean master data error?
How could master data be having error?
Most characteristic relationship used are attribute types. There are 2 using classes.
Thank you in advance.
regards
YHogan
Edited by: Yohannes Hogan on Jun 20, 2008 1:03 PM

Error message when trying to recover HD: PXE-E61 Media test failure

Hi all, new to forums, lots of good info and support here.
Got the BSOD last week. Have been trying all of the various fixes mentioned on the board, to no avail. I went back multiple pages looking for alternatives to try. After stepping away for a few days, I got farther today than I did when I was frustrated. F12, chose to boot HDD, and got the following LOOPING error message:
PXE-E61 Media test failure check cable
PXR-MDF exiting PXE rom
Which gives me hope that I may not have to replace my hard drive.
I have a satellite L455-5975, and have ordered recovery disc from acclaim ('0' option didn't work for me, which makes me wonder if Toshiba time limits that support, but that's off topic)
So it looks to me like my RealTek Ethernet Controller might be the problem? Any thoughts or suggestions? Anything I can do or should I wait for recovery disk to arrive? I worry that the recovery disk isn't going to do what I need. Do I need to replace the ethernet controller, or is this a sign of a hard drive issue? I consider myself 'fairly' tech savvy, but I've never taken a computer apart/put one together myself. It would definitely cost less for me to replace HD myself than putting it in the shop. So I'm willing to try that option if need be.
I appreciate any help/support! Reading some of the previous posts make me wonder if rather than investing more money in the satellite, if I shouldn't instead be saving up to buy a new(er) model.

Creedym...
I have a very similar problem with my mini-notebook model NB305.
I'm getting the same message and can't get past F2 or F12.
Bottom line; I ordered the recovery data from Toshiba on-line by model number ---not by type. They sent two DVDs. My unit doesn't have an optical drive.
First call to "John"---yes, you can copy the data to a thumb drive and use that.
Almost two hours of transferring --- the NB305 did not respond to the thumb drive.
Second call to "Paul". After some consultation on his part with someone else he told me that they don't make a thumbdrive (USB) recovery disk for my model, that's why I received two DVDs. ! I would have take it to a shop where they etc...
I haven't decided what to do next. Maybe purchase an external drive rather than take it to a repair shop where it will probably cost more than buying an inexpensive external drive.
t.

Performance issue: Calling a BAPI PO create in test mode to get error msgs

Hi,
We have an ALV report in which we display purchase orders that got created in SAP, but either got blocked due to not meeting PO Release strategy tolerances or have failed output messages. we are displaying the failed messages even.
We are looping the internal table of eban(PR) & calling bapi po create in test mode to get failed messages.
Now we are facing performance issue in production. What can be the alternate efficient way to get the error msgs with efficiency
Regards,
Ayub H.
Moderator message: duplicate post (different ID, same company...), see below:
Performance issue calling bapi po create in test mode to get error messages
Edited by: Thomas Zloch on Mar 9, 2012

Hi Suvarna,
so you need to reduce the number of PO-simulations.
- Likely you checked already, that all EBAN-entries should already be converted into POs. If there would be a large number of "new" EBAN-entries, they don't need to be simulated.
- If it's a temporary problem: give aid to correct the problems (maintain prices or whatever the error-reasons are) Then the amount of not-converted purchase requisitions (PR) should drop, too
- If it's likely, that your volume of open PR will stay high: create a Z-Table with key of EBAN and a counter, simulate (once a day) PO conversions and store the results in the Z-table. In your report you can use the results... if they are "new enough". From time to time new simulations should be done, missing master data might be available.
Maybe users should be allowed to start this 2nd report manually (in background), too -> then they can update the messages after some data corrections themself, without waiting for the result (just check later in online report and do something different in between).
And you might need to explain, PO simulation takes as long as PO creation... there is no easy or fast way around this.
Best regards,
Christian

Model 2310 error message"test mode"

Similar Messages

Maybe you are looking for