Model 7500 Verizon DSL Modem/ Router Help!

I just reformatted my hard drive and reinstalled XP on my desktop cause of a virus. Everything is working fine, but I heard from someone the model 7500 comes with wireless. How do I get that to work? I really want wireless for my laptop also because the local connection around here plain sucks. Can anyone give a detailed guide and/or link to help me set it up?
Thanks
-Reynorigod

#1 Go to http://www22.verizon.com/residentialhelp/
#2 Set your Preference for Internet to DSL, as need be.
#3 Then go to Internet -> Home Networking -> User Guides
#4 Select the user's guide for VersaLink 7500.
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Connecting Timemachine to Verizon DSL modem/wirelss router

How can I successfully connect my Timemachine to a Verizon GT704WG DSL modem/wireless router? Set-up I tried: The DSL line (reg. phone wire) is connected to the Verizon device. I connected the Timemachine to the router via ethernet. On my Verizon Network (loggin in via the browser) I can see the device connected. But the Timemachine keeps blinking Orange (error I assume). I cannot see the device via my MacBook pro in AirPort Utility (when trying to open TimeMachine). I also cannot click on manual set-up (option not available - grayed out).
Question: Is it possible to connect Apple's Timemachine to another DSL wireless router via ethernet. Are there setting I must use to make the timemachine available, since the DSL router recognizes the device. How does one set this networking configureation up - or are there other devices I need as an intermitted relay - and will thise hamper troughput?
PS: My DSL router does not have a firewall set-up for the connection to the Timemachine. I allowed all rules for the device. DHCP is dynamic.
Any advice is much appreciated.

Thank you Neturonboy for asking this question and thank you Tesserax for answering it. It's amazing that Verion's site has nothing about this; they do mention the Time Capsule, but nothing about this typical configuration. I have the GT784WNV model DSL modem/router, which is probably similar to yours. As soon as I turned Connection Sharring Off (Bridge Bode) and updated changes it worked.
However, I couldn't find where to do this at first using Mac OS X Lion. Luckily, I had an older laptop, which had the more familiar looking AirPort Utility version 5.4.2 you're talking about. After I had switched to Bridge Mode, I went back to Lion's version and could easily see where this setting is located. In Lion's (10.7.4) AirPort Utility, click on the image of your Time Capsule (there is no "Manual Setup" button in Lion), then select Network (not Internet), then change Router Mode (not Connection Sharing): to Off (Bridge Mode).
About Guest Networks:
Note, if you have a Guest Network, then once you go to Bridge Mode, this feature is turned off; the whole Guest Network tab disappears from the choices under Airport (using the older AirPort Utility). Since these Verizon modem/routers are also wireless, your guests can access the network directly from Verizon's router instead of going through your Time Capsule. Perhaps having a wireless router feature for your DSL modem makes the Time Capsule's Guest Network option redundant. You can get the network name, and other security information from the label on Verizon's router, but there is also a WPS (Wi-Fi Protected Setup) feature that looks like it might be useful for sharing your network. There's a physical button on the modem and there's a settings page on the routers' web browser accessible settings at 192.168.1.1.. I'm still looking into this.
Good luck!

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

WiFi Problems w/ OS X 10.4.11 and Speedport W 502V DSL Modem/Router

We just moved to Germany again, so went to Deutsche Telekom (DT) for Internet/phone access. They sold us a Speedport W 502V DSL Modem/Router with manuals--all in German, as DT does (DT offers NO support in English; some would argue they offer no customer support at all).
Babelfish and I managed to configure a late-model eMac, G4 PowerBook and two iPhones with the DSL router, with pretty good success (sometimes we have intermittent Internet connectivity). Then our household goods were delivered and we unpacked and set up the G4 dual-GHz tower. So...the G4's Airport (not Airport Extreme) "sees" the WLAN and the https://speedport.ip site "sees" the IP address of the G4, but the G4 can't join the network, no matter what I try. It's to the point that I think it's something painfully obvious that I'm missing and I must be too far in the weeds...so now I need fresh eyes on the problem.
I have no computer connected to the Speedport, and wouldn't have thought that was the problem because the other non-physically-connected computers are using the WLAN network. Thanks for any help!

hi kathryn
did it have to be the Telekom, by all means??
anyway, first of all a link to a video where a german comedian writes a letter to steve jobs demanding he chose any carrier but the DTAG for the iPhone distribution in germany - really funny!
http://bit.ly/4B4OdQ
OK, I´m currently downloading the speedport manual from their website and will look through it, in order to see if there´s something in there..
as a first guess I´d try looking at the wireless prefs of that speedport box. I guess it supports by default 802.11a/b/g, whereas the G4 only does 802.11b (the "normal" airport). Try selecting only the 802.11b portion from the speedport (that makes networking somewhat slower for airport express computers, but shoudn´t be a problem since it´s still at least as fast as basic DSL service (11MBit vs 2 or 6 MBit)
cheers
Matt
(german in spain)

Airport Express to Verizon DSL Modem - Connectivity issue

I have Verizon DSL at home. I have an iMac G4 1.2GHZ w/o internal wireless. I'm trying to use the AX to join the DSL Wireless, and use the Ethernet on the AX to provide internet access to the iMac.
Setup:
Verizon DSL modem w/ build in Wireless G
MAC address authentication
AX MAC added to the MAC list
AX Sucessfully added to DSL Wireless (I can see it connected at the DSL modem web page
AX Status light is green (confirmed its getting an IP from the DSL Wireless)
iMac plugged into the AX via ethernet (confirmed its getting an IP from the AX)
No internet access on the iMac however.
I did notice in the Airport Utility that sometimes the AX is logging:
Connected to: <insert mac address here>
Disconnected from: <insert mac address here>
over and over at times....
The AX and the Wireless router are approx 15ft from each other.
I've also powered everything down, fired up DSL Router 1st, then AX, then Computer. Still no dice on internet to the iMac.
Any suggestions? I shouldn't have to add the iMac MAC address to the filtering...but maybe....didn't have time to try that lastnight/thismorning.
Thanks for any help!
Message was edited by: Hightech.Redneck

Welcome to the discussions!
Couple of thoughts here:
Check AirPort Utility - Manual Setup
Click the Wireless tab just below the icons
Make sure there is a check mark next to "Enable ethernet clients"
You are trying to use the AirPort Express in a configuration known as a ProxySTA.
The modem/router will need to be compatible with this function, so you should check with your ISP to see how this could be enabled on your modem/router.

Best DSL modem/router?

I'm sure this question has been asked but how recently, I wouldn't know. We have a D-Link DSL modem/router sent to us by Verizon in 2010. My desktop Mac is connected via Ethernet to the modem. Our other devices use Internet via WiFi. Verizon can sell us a new basic modem, of course. But I'd like one that has a stronger WiFi signal. Can anyone suggest a specific brand and model that will work with our DSL and emit a stronger signal? Thank you!

sherylsrtx wrote:
I'm sure this question has been asked but how recently, I wouldn't know. We have a D-Link DSL modem/router sent to us by Verizon in 2010. My desktop Mac is connected via Ethernet to the modem. Our other devices use Internet via WiFi. Verizon can sell us a new basic modem, of course. But I'd like one that has a stronger WiFi signal. Can anyone suggest a specific brand and model that will work with our DSL and emit a stronger signal? Thank you!
get your own router/wap and connect it to the modem.

Newbie-2 Mac Laptops, One AE, One Verizon DSL modem, VPN-Set Up?

I have read through the discussions here before I posted, but since I am new to Airport Express (AE) I may have missed the obvious.
Our household has two Mac laptops. I just purchased AE and am trying to figure out how to hook it up with my Verizon DSL modem.
Can I just use an ethernet cable from the DSL modem to AE? Or do I need some kind of switch?
Will two laptops (with Airport cards) be able to connect to the internet at the same time using AE?
One laptop has a VPN for work. Will there be issues with AE and that set up?
Sorry for the dumb questions.

My question is how do I keep my Power PC connected to the DSL modem and set up the AE? There is only one ethernet port out. Do I need a hub?
No. Since the AirPort Express has only a single Ethernet port it can not connect to a broadband connection AND support a wired (Ethernet) client. Using a hub or switch between the broadband modem and AirPort Express will put the AirPort Express's DHCP server in direct conflict with your ISP's DHCP server. Your ISP won't like that.
Your options are:
Replace the AirPort Express with an AirPort Extreme base station (AEBS), or an inexpensive 802.11b/g compliant base station. In addition to the WAN port, the AEBS provides one LAN port (an inexpensive base station will provide 4 or more) for connection to wired (Ethernet) clients.
Place a wired router between the broadband modem and the AirPort Express. Configure the AirPort Express so that the option to distribute IP addresses is DISABLED.

Airport Expess with DSL Modem Router

I had a DSL Modem Router with 3 computers plugged into it via ethernet and was working fine. I then replaced one of my computers with a laptop so bought an AE and plugged it into an ethernet port on the DSL modem router. It worked fine for about 4 days then all three computers internet connections went down. I have got the two desktops working again with the AE disconnected but am worried that if i connect the AE again the same thing will happen. Is there any way that i can avoid this from happening? is this because i am doubling up the routing if you know what i mean?
MacBook Pro 17" Mac OS X (10.4.7)

First welcome to the discussions,
This isn't that uncommon, many of us expieriance drops in service and have to reset our systems.
There could be any number of reasons that cause this from a Power Spike to surges from power company, to storms from wind and lighting.
If you are lucky nothing gets fried and a simple reset will take care of the problem. Other times it can fry about any component and sometimes it's hard to find exqactly what is fried. If you are able to reset and get everything up and running again I wouldn't worry to much, I would consider a Battery Back-up to add to your Network to save your equipment though.
Cheers and Good Luck.
Don

Can Westell 327W DSL modem/router receive wireless signal?

I have a spare Westell 327W wired/wireless DSL modem/router. I need a wireless access point for a G4 Power Mac away from an Apple Extreme. I knew how to make the Westell 327W in a bridge mode. Is there a way to make 327W communicate wirelessly with a FIOs modem/router?
Thank you very much.
Robert

Hmmm, perhaps something like this with a USB extension cord would be a solution, they have better Range even without an extension than Airport cards ime...
http://eshop.macsales.com/Item_XLR8YourMac.cfm?ID=10303&Item=NWTMXP802NU2C

DSL Modem / Router for Airport Extreme / Express

Please can anyone advise re the best DSL Modem / Router to use with an Airport Extreme and Express.
I am in the UK with BT Broadband. I currently have a Netgear DG834G which has been great but seems to need a lot of re-setting recently and has been dropping the connection. I've checked our line with the provider and that seems to be OK. The Netgear DG834G is currently wired via CAT5 to my Airport Extreme which is then also wired to an Airport Express to extend the network.
We are in a rural area so don't have particularly fast Broadband speeds (max tends to be around 4MBps).
As I'm using the Airport Express / Airport Extreme for my WiFi I don't necessarily need a modem / router with wireless or anything that has bells and whistles or can make me a decaf macchiato...I just want something this is bomb-proof and super reliable.
I've looked at various forums and am just getting confusing stuff re what works and what doesn't.
We are due to get fibre-broadband in our area next year - very happy to have to get a new router then for that if needed. The important thing for me is to have a decent set-up for now.
Many thanks! Eddy
Using Macbook Pro and iMac on 10.9.5

You don't need a modem/router since the AirPort Extreme is a router.
I don't know what the best modem might be....that would involve testing hundreds of products, and even if we could come up with a "best" modem for the AirPorts, it would likely not be the "best" working the BT connection, or BT would not support the product......,but you might want to take a look at the Draytek Vigor 120 modem, and then check with both the Draytek support folks and the BT support folks to make sure that the modem will be compatible with your service.
Vigor 120 ADSL Modem - Draytek
If you are due to get a fibre connection in the future, then you will have to start over again modem wise at that time.

Settings to get wireless router to work with verizon DSL modem?

I have a friend who lives in NYC who's roommate has verizon DSL service, and they're trying to get their Linksys BEFW11S4 wireless router working with it so my friend can use wireless with her laptop. They're clueless with networking things, and I'm only familiar with setting routers up for Fios and cable service. I know DSL settings are different and I was hoping somebody could tell me the important ones to use on the router for Verizon DSL in NYC. Right now the roommate is just using a little 3"x3" black modem connected to her computer with an ethernet wire, but they don't know what model or anything the modem is. Can anybody tell me what settings I should use when I login to the router and configure it? Thanks

Perhaps this may help
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

DSL modem/router needs to be just a modem to take advantage of TC?

I just bought a time capsule and was finally able to set it up to back up my MacBook Pro. I think I will be very happy with the product. I am new to the support side of the Apple website and was hoping somebody could help me out with a question. I would like to use the time capsule as a router but since I have a combined modem/router From my DSL Verizon Internet connection, AppleCare said I could not use it as two different routers or there would be problems. I was told that I needed to call Verizon to find out how I turn off the router capability/portion of the combined modem. Does this make sense to anyone? Does anyone have any good ideas on how I can accomplish this easily? The device appears to be a ActionTec Verizon brand modem model number MI424-WR rev D

I was told that if the time capsule is in bridge mode, it can only backup up one computer. Is that accurate?
This information is not correct. A Time Capsule in Bridge Mode will allow multiple Macs to backup, with the practical limit being about 5 or 6 Macs.
I have 3 Macs backing up regularly to a TC in Bridge Mode, and there have been no error or delay messages with the setup.

How to configure WRT350N as a router in a network wih a DSL modem/router

Hi,
I'll really appreciate if somebody please could give me some help.
The problem is that I have a Dlink DSL-2640B modem/router AND a Linksys WRT350N router, what I want to do is how to configure them so they both are in the same network, and the WRT350N has access to internet and the computers connected to the DSL-2640B.
Is that possible?....OR...the other option I was thinking was leave the DSL-2640B as a modem only, and have the WRT350 make all the routing wired and wireless.
I'll really appreciate your comments.
Regards.

As per my knowledge it is better to use the wireless router to provide connection to wired & wireless computers. Leave the DSL2640B as a modem, connected to internet port on wireless router.

Verizon DSL modem not connecting through Linksys wrt54g

I recently switched to verizon DSL from comcast. The verizon modem when connected directly to the back of my mac works amazingly well. Now i was to be able to connect with my laptop and xbox360 wirelessly which was not a problem with comcast. So i take the Ethernet/Data/Modem cable(what ever you want to call it) from the modem and connect it to the INTERNET port on the back of the router. Then take another ETHERNET cable and connect it from the first WAN port to the back of my computer where the modem was originally directly connected. The routers internet light is on as is first ethernet light on the front of the router. And all three lights on the modem are on; internet, data, and dsl. The macintosh is now not able to connect to the internet. The laptop can connect to the network but not to the internet.(says local only) It seems like a lot of people have had this same problem but i have yet to see a solution. and again when i take the cord from the modem to the router and change it back to connecting the modem directly with the home computer (mac) the internet works fine. I know this seems very dumbed-down and a dumbed-down kind of answer is preferred. I have been fixing problems with our home network for years now and have never come across something that stumped me while the solution seems like it would be so simple.

If you have Verizon DSL and you wish to configure your router and connect the XBOX360 wirelessly, then, first thing you should do is to fully bridge your modem, then connect your modem to the internet port of the router and configure your router's internet connection type to PPPoE...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
When the router’s web-based setup page appears, click Setup then look for Internet Connection Type and select PPPoE on the drop-down arrow.
Enter the username and password that your ISP provided you in the User Name and Password fields, including the domain in the username if necessary such as [email protected] and CLick Save Settings.
Click Status then look for Login Status and check it says Connected. If it’s connected, you should be able to access the Internet.
NOTE: If the Login Status says Disconnected, click Connect, then check if you’re receiving an error message.
If you get an error meaasge follow this link
For xbox -
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
3) Click on set-up and change the MTU Size to 1452 and click Save Settings...
4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
5) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
6) Turn off your modem, router, and Xbox...Wait for a minute...
7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
IP Address: 192.168.X.[last part of ip in your device] e.g. if static ip given to the device was 192.168.X.10 get the last part and put that to the empty box.

Port-forwarding or UPnP on VERIZON FIOS modem/router

I'm trying to help someone access his home network remotely from another location. he just got the new Verizon FIOS network.
i'm new to the world of port-forwarding and UPnP forwarding, but have learned a lot in a short period of time.
I can easily setup port-forwarding and UPnP forwarding (necessary to setup the afp file sharing, screen sharing, etc) on Linksys routers that have those capabilities.
My friend just got the new Verizon FIOS network installed. It is smoking fast both up and down. We figured out that the box Verizon provided him (it's a fairly huge thing) is an internet modem, a router, and a wireless router all in one.
And once we accessed its control panel, I definitely saw places where we could configure port-forwarding........
but it's not quite as straightforward as it is on a Linksys router in that, on a Linksys, if I want to open a specific port, like 5900, for screen sharing, I can easily type in the numbers 5900 and type the IP address of the computer on my LAN that I wish to forward port 5900 traffic to.......or I can do this with UPnP forwarding....either way it is simply and fully controllable.
But on this Verizon box, it seems to have most standard ports and protocols stored in presets that you must choose from. For example, if I wanted to setup port forwarding for FTP traffic, I would choose FTP from the dropdown menu and then the router would automatically know to forward port 21 to the computer of my choice.
but we specifically want to turn on AFP for apple file sharing, which is port 548. On the Linksys, i could simply type port 548. But this Verizon router does not show a service called AFP. It has a nice LONG menu of many different pre-set options, but AFP is not one of them. Would it be called something else on a device like this that is obviously not specifically designed to know Apple's file sharing protocol?
So would anyone know what kind of service I should look for that opens port 548 for file sharing?
Anyone have experience with these new Verizon routers/modems yet? I'd really love to find a way to type everything in manually, but I dunno if that's possible on this unit.
i know there's a lot here. thank you to anyone who knows about this and can shed some light

That doesn't work because applications that initiate outbound connections are given randomly assigned 5-digit port numbers (e.g., 49144) through which the CLIENT communicates. The "well known" port numbers like 548 for afp, 22 for ssh, 80 for web servers, etc., are for the SERVER function to which the server daemon listens. Example: you don't send the request to download your email from your pop 110 (or 995 when using SSL), or from your imap 143 (or 993 when using SSL); that's the port number at the DESTINATION server to where your traffic is delivered, i.e., the port to which that SERVER is listening for incoming traffic. Same for when you send mail, you send from some randomly assigned five-digit port number TO the smtp server's port 25. You can see this by launching Terminal.app from an admin-privileged account and typing sudo tcpdump -i en1 (use en1 for airport, en0 for wired ethernet) and looking at the packet transmissions' headers.

Model 7500 Verizon DSL Modem/ Router Help!

Similar Messages

Maybe you are looking for