Model A1236 Nano iPod worked great until today. This morning it didn't turn on. Thought it was battery
Model A1236 Nano iPod worked great until today. This morning it didn't turn on. Thought it was battery. Charged it but didn't help. Turned it off & on. Isn't recognized by iTunes or Computer Devices. Now what?
I suggest you take it to Apple and ask them to check it out for you.
Similar Messages
-
I just got a refurbished iPod 5th generation 32gb. This morning I went to turn it on and it didn't do anything and kept the black screen. I tryed to turn it on but it didn't do anything. The day before it had looked weird, as in I was downloading an app and it powered down, the when I tryed to turn it back on it got red and green lines on it. Should I send my ipod in to Apple so they can fix it or can I do this myself?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Or send it to Apple
Service Answer Center - iPod
Apple Retail Store - Genius Bar -
Sometimes my Ipod Touch4 will ave some glitches and go back to normal. Yesterday i was using my ipod as usual and after an hour i was going to use it again but it had a blank/white screan. What can i do to get it back to normal?
That symptom is covered here:
iPod touch: Hardware troubleshooting -
FaceTime has been working great until today
It was working fine between my iPad2 (in NC) and my daughter's (in MN). Now it's not working on the 4s or MacBook Pro (no audio or video). Anybody have any guesses what's going wrong.
everything was fine on my end. My daghter rebooted her iPad and now we're connected again
-
Nano worked yesterday. Last night it didn't turn on. Thought it was battery. Didn't charge. Computer
Model A1236 Nano iPod worked great until today. This morning it didn't turn on. Thought it was battery & tried to charge it. Didn't charge. Computer & iTunes don't recognize its presence. Turned it on & off. No lights...
Where have you tried for answers?
-
I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933 -
I have had trouble opening the icon to compose a message in my e-mail on my iphone. If I do manage to open the icon, "New Message" appears, but no keyboard to type a message. My e-mail has been working correctly until today.
Hello there, Eleanor64.
The following iPhone Troubleshooting Assistant should provide some assistant in helping resolve your Mail app not performing as expected:
Apple - Support - iPhone - Application Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/application/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
Message is almost acting like a pop up.Hi
I constantly get same message. When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to. -
Back-up has worked fine until today. Cannot completelately -"Back-up failed. Stopped all programs and tried again - no go.Have LaCie 1TD drive, 235GB used.
Format OS extended (journaled) on the drive.
Mac OSX 10.8.8.
iMac 2.4 GHz Core 2 Duo
Any ideas appreciated.
Have same drive on newer iMac - appears OK.Hi Joseph, was hoping the resident TM expert Pondini would drop in, but I guess not.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Repair the external/backup drive also. -
I received my new iphone 6 last week, backed my iphone 5 and then restored my new handset. It has been working fine until today when I deleted all my contacts from my old handset. Contacts have gone from my new handset too, how do I get them back? I don't think the back up was done using icloud as I keep getting the message "not enough memory"
The point is not whether you used iTunes or iCloud to restore your new iPhone. It's whether you have Contacts turned on in Settings > ICloud. If you do on both your old iPhone and new iPhone then those devices are connected through iCloud. Deletions on one device are also made on the other.
You may be able to restore your Contacts be using your old device backup to restore your new iPhone again. Make sure that you turn Off ICloud functionality on your old iPhone before you delete anything else from it. -
Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today.
Suddenly today, my iPhone won't send pictures to certain people...has worked fine until today. Sends fine to some but not to others. What's up?
Like any electronic item, it sometimes gets inexplicably balled up. The reset is no different than rebooting a computer that is acting hinky. If you don't have to do it often, then it is not anythign to worry about. (I know - not the kind of tech talk you were probably expecting, but the words selected are about as scientific as you can get concerning this type of weirdness....)
Cheers,
GB -
I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died
Maybe you are looking for
-
How to create a table with values to be selected?
is there a class in java that display a table a table of parameters and allow the user to select the parameter, and process the value associated with this parameter field? thx!
-
Can anyone help with a very slow iMac?
I'm getting increasingly frustrated by this computer, it takes an age to start up and then the processor makes it's noise for quite some time before allowing me to do anything. Often the beachball is whirling around too. I'm pretty useless when it
-
Automatic payment for payment by bills of exchange
HI, I have freshly set up the automatic payment program for bills of exchange. I have created a payment method (X) for bills of exchange and given the special GL indicator as 'W' in the payment methods screen. However when i process the payment run f
-
Retrieve data partially without re-execution of query
I am using Visual Basic.NET for programming. Database is Oracle 9i Enterprise Edition Release 9.0.1.1.1 Platform is Windows XP Professional. I am going to execute an Oracle Query (or Stored Procedure) from my VB.NET environment. This query returns 1,
-
Getting a Message No Vendor Specified FromCL_MESSAGE_HELPER=============CP
Dear All , I am Getting a message No Vendor Specified in a Z transaction . But in Z Transaction I have Specified a Message in the Program . I am attaching the same below IF SY-SUBRC = 0. IT_AUFM_TEMP[] = IT_AUFM[]. SORT I