Model Bean Importer fails for superclasses?

Hello,
I am trying to import a bean model into webdynpro. The top class of my structured bean model fails to import if it extends a superclass. I tried different ways, even with a very simple base superclass but keep failing to import.
Instead, bean classes that implemet interfaces get imported properly in the model and interfaces are automatically imported.
Is there anybody that can give advice? I need my bean model to extend a superclass since I want to "hide" out some internal methods from the pure bean model and write them only once in the base superclass.
I am on DeveloperStudio SP13
Regards

Hello Valery,
I solved by myself after some more attempts. The problem in generating the model from a javabean appears if the bean class contains references to other custom classes that are not visible by the model wizard, no matter if you add them to the webdynpro project as project references or java build path libs, they are stil not considered by the wizard. So I worked out to build the model from a jar (located in another project) that contains all classes.
My case:
Class R located in a deployable library project.
Class R is referenced in webdynpro project
BeanSuperClass A internally uses Class R
BeanClass B extends A
Wizard fails generating model for either A or B.
The pitty is that the model wizard does tell why it fails. It would be grate and much simpler if the model wizard could take into consideration the build path of the project where the model is being generated so that we can keep bean classes properly separated from other general purpose stuff.
BTW Thanks for the hint and regards,
Vitaliano

Similar Messages

Import fails for movies on Intel Macbook

Importing with iPhoto on my MacBook fails on the first movie it encounters every time.
The movies are 30 second AVI files from a Canon Ixus v3 connected via USB. The import will show no progress for about 5 minutes and then apparently time out. It returns to the iPhoto library and neither the movie nor subsequent content are there.
The same combination of camera, cable, photos & movies works perfectly on other computers, a 17" 1GHz Powerbook and and a 17" 1GHz iMac.
The same CF Flash card, photos & movies work fine on the MacBook using a CF-USB card reader.
Using Image Capture on the MacBook instead iPhoto worked once but every other time it has behaved just like iPhoto. It times out and fails to import that first movie or any subsequent content.
I created a new user on the MacBook and tried importing with iPhoto in there and the same failure occured.
I reset the PRAM and tried again to no avail.
I worked through all this with the AppleCare phone support with no success. The support person consulted senior technicians for a couple of minutes and came back to me with their opinion - that it is probably an incompatibility betwen iPhoto, the Intel Mac and the Canon Ixus v3 ie. the specific combination of those three things.
They suggest that it's not a USB issue because iPhoto imports perfectly using the CF-USB card reader. They believe it's not an iPhoto software installation issue for the same reason. It's not a preferences issue because it also failed with a new user and the PRAM reset didn't help.
They apologized for not finding a solution for me and could only offer the workaround of using the CF card reader. That's not such a bad work around but I'd still like to persist if anyone can suggest any further troubleshooting or possible solutions. I'd also like to see "me too" posts from anyone who has had the same issue.

I have had a similar problem, where maye 8 out of 10 AVI format moves will download into iPhoto, but the rest simply never get there. I did get 107 out of 109 files OK but have seen worse. I can tell you about which camera it is, how I connect and so on, but first, this:
A small sidebar in the Bugs & Fixes column of the April, 2007 Macworld magazine (see page 89) mentions that: "the likely cause is a problematic third-party QuickTime Plug-in." and advises the reader to check for and remove plug-ins not installed by OSX.
I took the same camera and imported all 109 pics from my camera on a separate account of the same machine (20" i-mac but I don't think this is relevant) and got all 109 f 109 files just fine.
So, I think "problematic third party QT plug-ins may be a good call. Need to investigate this some more, but its a flaky problem and Macs are supposed to "just plain work".

AVI import fails for older files but works in iMovie

I have two sets of AVI files, one from early 2000 and newer post 2008.
Both groups of files import fine into iMovie 11.
however, only the newer group imports into FCP X.
I can convert the older files to MOV using QT, but this won't work well for many files.
Seems if iMovie can read, so should FCP X.

I have had a similar problem, where maye 8 out of 10 AVI format moves will download into iPhoto, but the rest simply never get there. I did get 107 out of 109 files OK but have seen worse. I can tell you about which camera it is, how I connect and so on, but first, this:
A small sidebar in the Bugs & Fixes column of the April, 2007 Macworld magazine (see page 89) mentions that: "the likely cause is a problematic third-party QuickTime Plug-in." and advises the reader to check for and remove plug-ins not installed by OSX.
I took the same camera and imported all 109 pics from my camera on a separate account of the same machine (20" i-mac but I don't think this is relevant) and got all 109 f 109 files just fine.
So, I think "problematic third party QT plug-ins may be a good call. Need to investigate this some more, but its a flaky problem and Macs are supposed to "just plain work".

Fixed asset import failed for 1 asset but why?

Hi Experts!
1 assets wasnt imported to SAP, but no idea why.
The asset was bought on 2007.01.08, the import regards to 2009, so only 1 month is to be depreciated.
This is the log file:
Life Parameter: 1000123;Z0001;szoftverlicenc;155;2007-01-08;;;;LK100;;;;2080000;0;2080000;100;2007-01-08;24;1;LINHU;2060052;;;;;;;;200;2007-01-08;24;1;LINHU;2060052;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Any idea what to do with it?
Thank you in advance!!

Only this item wasnt imported.
The last depreciation of this item is in the same month as the import regards, maybe this cause it?
But then what to write into the remaining deprecitation run..

Purchase Requisition Import failing for Dropship orders

Hi,
EBS - 115.10
When dropship order is booked, data is populated into po_requisitions table...After running the import error message says 'Invalid Deliver To Location'.
Which is basically populated from LOCATION_ID of SHIP_TO Site.
DESTINATION_ORGANIATION_ID is populated as Inventory Org
DELIVER_TO_LOCATION_ID IS populated as LOCATION_ID of SHIP_TO Site.
So anything wrong in this. If yes, what needs to be changed?...Please suggest

Can you check if it is 'internal location_code' of that inventory instead of customer site location ?
Location_code is from hr_locations, location is from hz_locations.

Import Failed for Global Schema

Hi,
I am trying to create GLOBAL schema for demonstration, The script is executing fine but there is no data available in the tables and no objects are created in the cube. Please advice.
Venkat :-)

Hi,
I had I a problem loading data with SQL Loader (date format in text files containing data for dimension tables is localized in english). Did you examine SQL Loader logs?
Simon

'invalid class-java beans not available for import

Hi Experts,
i am using java bean model in my Web Dynpro Application.
for that one i have created command bean(Customer) and in my command bean i am using some other class(CustomerInfo) as reference. this CustomerInfo class contains 4 attribtes(name ,id ,etc all are of type String)
when i try to import these 2 class into web dynpro (using java bean model),for the Customer class it
is giving an error message 'invalid class-java beans not
available for import'.but 2nd class(CustomerInfo) is imported successfully with out giving the error.what might be reason.
any help will be appriciated
Thanks in advance
With Regards
Naidu

Naidu,
Please try to repeat JavaBean model import when running IDE in console mode (correspondign short-cut should be available in Windows Start menu, otherwise just copy original short-cut, edit it and change in command string "javaw" to java).
Post here what is shown on console during import.
VS

Invalid Class -Java Bean not available for import

hai friends,
i have declared the bean but unable to import into webdynpro application
i am geting the error invalid Class-java bean Not available for improt
i am try for this since more than 10 days , i get the same error
even i thought there may be issues with nwds , i have installed thrice.
there is application download from the sdn tu_bonus calculation it is working
plz help me neede very urgently

Hi,
Go thro' these solved threads dealing with similar type of problem,
Import JavaBean Error : Invalid Class
invalid class - ..as Model Class already exist
Hope it helps to fix the error !
Regards
Srinivasan T

Portal Import Precheck failed for provider objects

I am trying to import some portal pages from one server to the other. I got all these precheck failed message posted as below. Can anybody tell me what was going on? My OAS version is 9.0.4
Many thanks,
Pre-Check
Start of Importing External Application
Validating and registering provider: LAC_PAGESE7985EE4E9371F2AE030007F01002436
Precheck complete for PROVIDER LAC_PAGESE7985EE4E9371F2AE030007F01002436
Validating and registering provider: DB_PROV_LAC
Precheck complete for PROVIDER DB_PROV_LAC
Precheck complete for APP_TEMPLATE LAC_GENERAL_TEMPLATE
Component DYN_HEADER with id 4467146863 cannot be reused or overwritten, since the name DYN_HEADER is in use by another Component.
Precheck failed for DYNAMIC DYN_HEADER
Component DYN_FOOTER with id 4478432881 cannot be reused or overwritten, since the name DYN_FOOTER is in use by another Component.
Precheck failed for DYNAMIC DYN_FOOTER
Precheck failed for DYNAMIC DYN_LAC_MENU
Precheck failed for DYNAMIC LAC_STAGE_AREA
Precheck failed for DYNAMIC DYN_HOME_DISPLAY
Precheck failed for DYNAMIC PAGE_LINE
Precheck failed for DYNAMIC DYN_QRY_COUNTRIES
Precheck failed for FOT FRM_UPD_COUNTRIES
Precheck failed for FOT FRM_UPD_STATES
Precheck failed for DYNAMIC DYN_QRY_CDS
Precheck failed for FOT FRM_UPD_CDS
Precheck failed for DYNAMIC DYN_QRY_CITIES
Precheck failed for FOT FRM_UPD_CITIES
Precheck failed for FOT FRM_UPD_HSS
Precheck failed for DYNAMIC DYN_QRY_STAFF_ROLES
Precheck failed for FOT FRM_UPD_STAFF_ROLES
Precheck failed for DYNAMIC DYN_QRY_SURVEY_MOTHODS
Precheck failed for FOT FRM_UPD_SURVEY_METHODS
Precheck failed for DYNAMIC DYN_QRY_SURVEY_TYPES

The message
Component DYN_HEADER with id 4467146863 cannot be reused or overwritten, since the name DYN_HEADER is in use by another Component.
indicates that a component with the same name already exists in the target. However, this component does not come from the same source as the one in the transport set (hence the difference in the id). This could also happen if the same component name was used to create objects in the target environment.
In order for pre-check to succeed, you will either have to rename the components in source (and re-export them i.e., create new dumps) or rename them in target so they don't clash.

Order Import - Validation failed for the field - End Customer Location

I am trying to import an order using standard import program and it is failing with below error:
- Validation failed for the field - End Customer Location
I have checked metalink to debug this and found nothing, the values i have used to populate the interface table or valid.
Can someone please post your views on this, on where the problem might be.
Thanks!

Hello,
Try the following
1) Check if any processing constraints are applied to customer/location
2) Try to create a new customer and associate internal location.
Create a new order to reproduce the issue
Thanks
-Arif

Mac book pro (2008)will not start up,command-v gives (error) Import:Importer start failed for 89(kr:268435459)invalid destination port)

will not start up.
tried Command-v
message reads
(error) Import:Importer start failed for 89 (kr:268435459)invalid destination port)

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Do we write one model bean for every JSF UI page?

First, Please excuse my minimal knowledge in JSF, I am just starting to crawl :)
Is my understanding about JSF that you will be writing one model bean class for every JSP page you have, CORRECT? (this is just my understanding, I may be wrong)
This will be getting hard for large application.
Ideal scenario: Say you have a JSP page A.jsp to associate an action reference you write a model bean class and have appropriate get method to return an Action object.
Can we write an Action class, separated from the model bean class. I tried to create 2 different packages and one which just had a simple model bean and the other package had a Action class. I was not able to get this working as it was bouncing back with a Method innovation/Illegal argument exceptions. I am very confused here is it a necessity to write the action method in model bean or can we separate it? If we can separate it can we package it in to different packages?
I may be confusing in explaining my questions but to put it black and white
A)
1 JSP Page (uses JSF components) = 1 model bean class (?)
or
B)
1..n JSP pages (uses JSF components) = 1 or may be 2 model bean class (?)
If B is possible how do we get the action classes towards this architecture and how can we get access to the various model bean objects in a single action class.
Sorry for my vagueness....
Thanks
Ram

In the particular case of your separate Action class,
you still need a getter method for it somewhere. I
find it easiest to include this getter in the same
model bean that contains the data, but it doesn't have
to be. Craig,
It seems to be the consensus that a getter is required, but I've had perfect luck registering a single Action class in the application scope:
<managed-bean>
<managed-bean-name>fooAction</managed-bean-name>
<managed-bean-class>org.bar.FooAction</managed-bean-class>
<managed-bean-scope>application</managed-bean-scope>
</managed-bean>And then referencing it directly:
<h:command_button commandName="foo" actionRef="fooAction"/>This feels more like the Struts approach to me, as there's a single instance available. (If I wanted thread saftey, however, I could declare it in the request scope instead). I use this approach when there's no data associated with the Action (like a LogoutAction).
Kito D. Mann

Dynamics crm 2015 import fail entity ribbon XML data that represents the customized elements of the ribbon for an enitity" error.

while import the solution into dynamics crm 2015.import fail is getting.could anybody help me on this.
hsk srinivas

Hello,
I believe first step is to Download Log File and recheck it for error.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

Order Import Failed in OM : Log Validation failed for the field - Ship To

Problem in Order Management
When i tried to do Order import in Source Org logfiles shows the Message :Validation failed for the field - Ship To, Please if anyone have a solution of this.
Thanks in advance.
Regards,
Rajesh Verma
Senior Consultant- Oracle Apps.
COLT

perhaps you might want to try populating customer_id instead of name to make sure that there is no error on typing customer name.
primary ship-to and bill-to must exist under this customer. During order import, if ship-to is not specified then import will fetch primary ST of customer.
This is what we use to populate interface table -with mininum of data.
INSERT INTO oe_headers_iface_all
(orig_sys_document_ref,order_source_id,org_id
,order_type_id,payment_term_id, shipping_method_code, freight_terms_code
,customer_po_number,salesrep_id
,sold_to_org_id, ship_to_org_id,invoice_to_org_id,sold_to_contact_id
,booked_flag
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code, order_category
,attribute5,tp_attribute4,xml_message_id,xml_transaction_type_code
,request_id, error_flag)
INSERT INTO oe_lines_iface_all
(order_source_id, orig_sys_document_ref, orig_sys_line_ref,orig_sys_shipment_ref
,inventory_item,item_type_code,line_type_id
,top_model_line_ref,link_to_line_ref,component_sequence_id,component_code,option_flag
,ordered_quantity
,order_quantity_uom,salesrep_id
,created_by, creation_date, last_updated_by, last_update_date,last_update_login
,operation_code,cust_model_serial_number,line_category_code
,context,attribute6
,reference_type, reference_line_id, reference_header_id
,return_context, return_attribute1, return_attribute2
,return_reason_code
,tp_attribute1,tp_attribute2,tp_attribute3,tp_attribute4,tp_attribute5
,request_id,error_flag)

Import check failing for SAP_ESS

HI,
In CMS I checked in required SC's and trying to import to Development System, before that when I do Import check, it is failing for SAP_ESS. For all the remaining SC's the import check is finished.
The error log shows following exception
20100615163058 Fatal :VcmFailure received
20100615163058 Fatal :caused by Exception:com.tssap.dtr.client.lib.deltavlib.CommunicationException: Communication error [cause: Broken pipe]:Communication error [cause: Broken pipe]
com.tssap.dtr.client.lib.deltavlib.CommunicationException: Communication error [cause: Broken pipe]
When I did import for the remaining SC's to development system after running for long time the import got failed, when I check the error log it says in the steps
Repository Import finished
CBS - Make Import failed -
the exception for this is
SDM-Deployment-notification   Not Executed
20100615152437 Info   :Starting Step CBS-make at 2010-06-15 15:24:37.0023 -5:00
20100615152442 Info   :wait until CBS queue of buildspace (XX_ESSTrack_XX) is completely processed, before starting the import
20100615152442 Info   :waiting for CBS queue activity
20100615152512 Info   :build process already running: waiting for another period of 30000 ms
20100615152542 Info   :build process already running: waiting for another period of 30000 ms
20100615192601 Info   :no changes on the CBS request queue (XX_ESSTrack_XX) after a waiting time of 14430000 ms
20100615192601 Fatal :The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
20100615192601 Fatal :Please look after the operational status of the CBS.
20100615192601 Info   :Step CBS-make ended with result 'fatal error' ,stopping execution at 2010-06-15 19:26:01.0688 -5:00
Please provide the solution for both cases.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 16, 2010 4:38 AM

Hi Pascal,
Your solution worked out well for Import check failure.
once the imort check is done and do import for the SC its throughout exception
20100618104458 Info   :build process already running: waiting for another period of 30000 ms
20100618104528 Info   :build process already running: waiting for another period of 30000 ms
20100618104558 Info   :build process already running: waiting for another period of 30000 ms
20100618104628 Info   :build process already running: waiting for another period of 30000 ms
20100618104735 Info   :waiting for CBS queue activity
20100618104935 Fatal :CBS throws exception during clearing CBS request queue:
20100618104935 Fatal :caused by Exception:com.sap.tc.cbs.client.error.InternalServerException: CBS Server Error: Internal server error( internal code: INTERNAL_SERVER_ERROR):CBS Server Error: Internal server error( internal code: INTERNAL_SERVER_ERROR)
com.sap.tc.cbs.client.error.InternalServerException: CBS Server Error: Internal server error( internal code: INTERNAL_SERVER_ERROR)
     at com.sap.tc.cbs.client.error.ErrorMapper.throwError(ErrorMapper.java:71)
     at com.sap.tc.cbs.client.impl.BuildSpace.isBuildProcessingEnabled(BuildSpace.java:203)
     at com.sap.cms.tcs.client.CBSCommunicator.isThereQueueActivity(CBSCommunicator.java:1726)
     at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:361)
     at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:223)
do have any idea about this exception too.
sure you will be rewarded for your earlier solution.
Regards,
Ravi.

Model Bean Importer fails for superclasses?

Similar Messages

Maybe you are looking for