Model Confirmation

Model: MD525LL/A will falls under Ipad3 or Ipad 4? How i can check the hardware properties (Like Processer,Model No) in 'Settings'?

iPad 4.
(73979)

Similar Messages

New model 8% or 20%?

Ok werd ive read every where that the new model is only 8% energy effienct but ive also seen couple site that says its 20% http://segmentnext.com/2015/06/30/new-tests-for-playstation-4-cuh-1200-model-confirm-reduced-power-consumption-and-noice-redcution/ so my question is which one is the right amount is alo will the console be alot cooler or about the same temps? Cuz less energy is less temps right does this revision make a big impact in the model before that one temperaturen wise?

I cant i just bought a ps4 last week the Batman steel grey bundle but then i found out it wasnt cuh 1200 not the new one cant return it but is it worth the upgrade already even tho i just bought one or does the new one run about as hot/warm then the one i have then its not worth it but i dont know these things some im askinf experts lol

Empty row in JTree

I'm working on an application that uses a JTree to display information which is entered in a separate dialog. When a record is added to the file a leaf node (and any necessary non-leaf nodes) is created. I'm trying to use scrollPathToVisible to make sure that the new node is visible. However I keep getting a blank row in the Tree (as below). Unit tests on the data model confirm that the data model is working correctly, but If I iterate through the rows of the JTree I see a row that is a duplicate of a row already in the tree. Anyone have an guesses as to why this is happening and how it might be corrected?
n-group
+ n-title
| + n-user
|
+ o-title
+ n-user

In my subclass of JTree (which implements TreeModelListener) I placed the call to scrollPathToVisible in a separate thread as below. This seemed to fix the problem, though it may not be an ideal solution.
public void treeNodesInserted(TreeModelEvent e) {
   SafeTreeNode treeNode=
      (SafeTreeNode)e.getChildren()[0];
   if(!(treeNode instanceof UserNode)) return;
   nodeToScrollTo=(UserNode)treeNode;
         SwingUtilities.invokeLater(new Runnable(){
      @Override
      public void run() {
         TreePath path=new TreePath(nodeToScrollTo.getPath());
         scrollPathToVisible(path);
         setSelectionPath(path);

Support wireless 5 ghz band

Does my ENVY dv6-7229WM support the wireless 5 ghz band on a dual band router?
Please reply to [email protected]
Dave

Hi, Dave:
According to the product specs for your model at the link below, the wireless only works on the 2.4 GHz band.
http://support.hp.com/us-en/product/HP-ENVY-dv6-7200-Notebook-PC-series/5296055/model/5309506/docume...
You can tell that because of the 802.11b/g/n WLAN wireless connectivity specification.
Anytime you see a wireless card suffix of bgn that means it is a single band (2.4 GHz) wireless card.
Dual band wireless N cards have a suffix of either abgn or agn.
The parts list for your model confirms that the wireless card in your notebook is a single band card.
Atheros AR9485 802.11b/g/n 1x1 WiFi adapter
http://partsurfer.hp.com/Search.aspx?SearchText=C2M12UA

Webcam not entering low-power mode after resume

Can other W520 owners with a webcam (and potentially other models) confirm whether or not the camera prevents the USB subsystem from entering low power mode?
1) Unplug all USB peripherals, and turn off Bluetooth (this runs on USB as well)
2) Put the system into standby, unplug the AC adapter, and resume the system on battery.
3) Load a Command Prompt and run powercfg -energy
4) Load the generated report and look for the following:
The most noticeable issue caused by this is unnecessarily high power consumption, and as a result, lower battery life.
Turning the camera on and off (using the Fn=F6 preview window) turns this off and returns power consumption to normal.
On the latest available BIOS, chipset, and camera drivers.
Would like someone to confirm whether this is a driver issue or if it's just my system.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

I have a very similar spec also. The pair of U2410's (updated revision A01) connected to it won't go into sleep mode (just go black, with backlight still on).
The pair of cheapie BenQ 2420HD's I had connected while I waited for the Dells went into sleep mode fine.
Someone on another forum noted that they had a different model Dell on Mac with the same problem, and he found it only happened when the USB uplink cable was connected to the Mac. I disconnected mine (uplink and down), but no change unfortunately.
Google searching seems to suggest this is almost exclusively only with a Dell/Mac combo (same monitor on PC works fine and other brands on Mac work fine). These U2410 monitors get an absolute bagging on most forums, and I think most of it is deserved. These will both be going back for a refund with severe blue/pink tints making them visually perform worse than the BenQ's that were 1/3 the price. What's the point of spending 2 to 3 times the amount on IPS monitors when they're off colour even right in front of them!
The HP 24" IPS uses the same crap LG panel as these Dells, I can't justify 2 x 30" Apple Cinema displays for AU$5000, and one just won't cut it. No simple answer it seems....
Cheers
Dav

Windows 10 Upgrade guide for Tablets

Results may vary depending on Models, confirmations needed.Installed & Tested on Lenovo MIIX 2 8 64GB (Please post your model if this has worked for you) **PLEASE PROCEED AT YOUR OWN RISK, I AM NOT LIABLE/RESPONSIBLE FOR ANY DAMAGES** Windows 10 is finally here, have you reserved your copy of the Free Upgrade yet? Here are some tips and guidelines to help you start the process.(If you have already reserved your copy, but the system hasn't prompted you for the update, you may need to download the manual install or force start the upgrade/update process. (See below for more details)) How to Reserve your copy of Windows 10 Free Upgrade Today IMPORTANT!!! DO NOT UPDATE YOUR SYSTEM WITHOUT RESERVING!! (You will be prompt to enter a Win10 product key for activation)Make sure you have reserved your copy of the Free Upgrade via 'Software Updates', there should be a windows logo in the 'Notification Area', click and reserve your copy today.Once you have your copy reserve, you may or may not get prompted for the update/upgrade. You can either wait for the official notification, or you can download the ISO or force the update process via 'Software Update'.Can't reserve your copy due to missing update icon on taskbar? Check this Guide. How to Start Upgrading to Windows 10 If you have been prompt by the 'Windows Update' , you can start upgrading by following the onscreen instructions.If you have not been prompt by 'Windows Update', you may need to wait for the official announcement to be pushed out.Check this website for Force Update procedures.How to Upgrade Windows 10 using ISO Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Choose Upgrade or Download the ISO.Download daemon tools to mount the ISORun SetupHow to Upgrade Windows 10 using bootable USB (OTG Cable Required)Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Download the ISODownload the Rufus Bootable USB creation app to create a bootable USB.Leave everything default except for Partition Scheme to ''GPT partition scheme for UEFI computer".Choose ISO and 'Start'.Once done, you can boot the USB or run Setup.exe in windows 8.1 (Setup.exe is recommended)I will keep this updated.Please let me know if there's a mistake or i'm missing a step. Enjoy your new OS. Vampirexhunter

Clean InstallOnce you have upgrade and activated your copy of Windows 10. You can do a clean install from the USB bootable, when prompted to enter 'Product Key', press 'Skip Step' to proceed. Once Windows is fully installed and setup, it should activate on its own.You may need to download the Win 8.1 drivers for your device.For Intel HD Graphics Drivers, you will need to download the latest ZIP and do a manual driver update in 'Device Manager'.Common ProblemsActivation may require a few tries, due to high traffic volume.Some users have reported the SD Card causing issues during Installation, it is recommended to remove the SD card prior to upgrading/installing your OS.Compatibility IssuesSeveral Users have reported technical difficulties installing Windows 10 on an Intel Based Z2760 Tablets, due to the incompatibility drivers for the Intel Graphics Media Accelerator(Intel GMA). No fix have been reported so far.

IPad's available storage on arrival

I got a 32GB last Saturday. When I was activating the iPad, I noticed that the avialble storage was a little over 29 GB.
Is this normal? Can anyone who bought a 32 GB model confirm?

kreme wrote:
Yes. In layman's terms, vendors 'round' the numbers off to make it sound like you're getting more space than you are.
No.
See below - rounding is not involved - its very precise. 32 does not 'round off' to 29 and a bit.

Whine Problem, What should I do?

I purchased a Macbook Pro $2499 model about 5 days ago. Two days ago I noticed the annoying 'whine' sound while in a quiet room.
I then visited these forums and found the posts from other users experiencing this issue. From there I went to the Apple store where I purchased the machine and requested a exchange for another model to see if that would fix the problem.
They then said they were going to have the technical guy take a look at it. He took it into the back room where it was quiet and came out telling me it was normal.
He stated they recently released a patch to lower the sound and that all the other Macbooks including his have this problem.
From the posts I have read I get the impression that this is not true, unless users who do not have this whine is just a lower amount of whine.
In any event, they are willing to let me upgrade to a 17" Macbook with only paying the difference between the two models.
Should I do this or live with the whine or wait it out or what?
Any advice would be great.

I brought my MBP into the Apple Store this weekend to hear it from the horses mouth. They explained to me that the noise I was hearing was normal for the intel processor, and actually went ahead and showed me the mirror widget trick to silence it if I thought it was an annoyance....though, he mentioned how it will cut into battery life. He offered the possibility that Apple might be working on a firmware/software update fix, but this was just a guess.
I personally believe they all have the whine. It's probably worse in some computers than others. Mine becomes the loudest when I'm running off battery power. But I only notice it in a silent room. One of my co-workers doesn't believe what he has is the whine, even while I've pointed it out to him. So I can see why some people wouldn't think they have it. It seems like most people who acknowledge they have the whine and have tried to get new models confirm that each new MBP they get has the whine.
I've decided its a quirk I can live with, because so long as the TV is on, and the windows are open, I can't hear it at all in my living room. Just in the dead of night or early morning. And the mirror widget does work. I guess I see it as a minor sacrifice in deciding to get a Rev A machine, and having a super fast intel processor. Obviously, I'm not 100% happy with the machine, but its other amazing features tend to over shadow the whine.

To confirm if it is a model Sound blaster 128 vib

My board has the following characteristics:
CREATIVE LABS MODEL NUMBER CT480 PCI
N0225Compiles with Canadian ICES-003 Class BSerial N? M48000048992Chips:
- TDA57P G9889 YSH9944 3 Y
- 4297A-JQ ZTAJYC9948
- Creative CT258 DBQ 59946H
- C24.576
CREATIVE TECHNOLOGY LTD. 999 ASSEMBLED IN SINGAPUR
photo in http://www.geocities.com/machosperu/ct480foto.gif chipset
My CD is broken and i need install correct software for my Soundboard.
Miguel Mujica
Please to confirm.
THanks

My board has the following characteristics:
CREATIVE LABS MODEL NUMBER CT480 PCI
N0225Compiles with Canadian ICES-003 Class BSerial N? M48000048992Chips:
- TDA57P G9889 YSH9944 3 Y
- 4297A-JQ ZTAJYC9948
- Creative CT258 DBQ 59946H
- C24.576
CREATIVE TECHNOLOGY LTD. 999 ASSEMBLED IN SINGAPUR
photo in http://www.geocities.com/machosperu/ct480foto.gif chipset
My CD is broken and i need install correct software for my Soundboard.
Miguel Mujica
Please to confirm.
THanks

Can Someone (with base model 2.3 i5 Mac mini) Confirm/Compare RAM...

I post this on another forum, but no specifics.
Can some please confirm or compare your ram usage for me.
With 2 GB, examining the pie-chart in the "Activity Monitor," with NO application in used, I have only about 45% (green) free.
I am just wondering, why am I left with ONLY less than 1 GB free to use???
Thank you.
Could this be the culprit: I have "mail5" set for three e-mail accounts,*but I closed it out completely--no light on the bottom...of any app.
Could the e-mail accounts be used in "Wired memory"? A BIG red slice of the pie-chart. (Wired memory--Information in this memory can't be moved to the hard disk, so it must stay in RAM. The amount of Wired memory depends on the applications you are using.)

mine is a bit the same in terms of hardware
compared to mtn lion then it takes much much longer to run ok from a shutdown if you just use sleep it don't suffer if you shut it down then it takes a bit to compress the memory and the likes and then it runs at ok speed
not sure if adding memory will help but maybe
other then that use sleep
or wait and see if the next update speed it up faster after a shutdown

Is it possible to model mac-mini M815 install a second hard drive?

Hi all!
Tell me whether, you can install a second hard drive, such as SSD or plain and you need to do?
My model mac-mini M815 with 500GB hard drive.

Standard Hard Drive:
500 GB (5400 RPM)
Int. HD Interface:
Serial ATA (6 Gb/s) x2
Details:
This model also can be equipped with a 750 GB, 7200 RPM hard drive for an additional US$150. A second hard drive or SSD also can be installed, although it is not formally supported. Also see: How do you upgrade the hard drive(s) in the Aluminum "Unibody" Mac mini models? What type of hard drive(s) do they support?
From Everymac.com.
For the Mac Mini MC815LL of 2011.
If this is not your model have a look here to find it and confirm what can be done.

Data model that takes part of data to DSO and part to cube

Hello experts,
I have a question about the data model I am currently working on. This model is about a reservation agency, where a customer contacts the agency through a sales representative and makes a reservation for a certain event. He later has the option of confirming or cancelling the reservation. We will be receiving data for future reservations every day, with the updated status of future and recently past reservations, sales representative in charge of the reservations, income that will be perceived from each reservation (if the reservation is confirmed) or that was perceived if the event already took place, and more.
I have found the need to use a DSO to update the reservation status of incoming reservations, as well as other fields. I am loading from a flat file with 20 fields, and the destination is a cube, after the data gets cleansed in the DSO, where there are 2 key fields (reservation code and reservation date). However, not all the remaining data from the flat file needs to get updated. Out of the other 18 fields, only around 9 may change on an update, while the others will never change (for example, the customer name, confirmation date and event name will not change, while the sales representative, reservation status and income perceived can change from one day to another).
I was designing a model in which the DSO contained all 18 non-key fields as data fields, so that everything got updated and passed to the cube, but then I thought that perhaps since many fields will not change, it would be better if the DSO only updated those fields that could actually change, while the other fields "jumped" directly to the cube. After the DSO updates the changing fields, the others will already be in the cube. This way, the DSO would receive and have to process less amount of data, making the DSO tables smaller and the process more efficient. But I cannot find a proper way to do this from a single data source, since the data has to pass from the data source to the DSO and then through a transformation from the DSO to the cube.
Is there a way to accomplish this, or should I just have all fields go through the DSO and from there to the cube?

Hi, thanks for the suggestion. The reservation code, as of right now, is not master data, and it is unique almost always, except for rare occurences where the same customer makes several reservations, each one for a different date (that is why for the DSO I am using as key fields both reservation date and reservation code). Because of that and the fact that there are lots of reservations made each day, we had defined that object without master data (since the master data table would be huge in a short amount of time). Perhaps I should change it to become master data? Or what should we do?

Problem connecting PowerPivot's (Office 2013) Data Model deployed on SharePoint 2013 to data source.

Hello:
Our configurations is as follow : SharePoint 2013 is on Server A; SQL Server Analysis server (SQL 2014) is on DB Server B;
SharePoint databases (sp_ ...) and our Data Mart (SQL 2014) are on server B. All servers runs Windows 2012 OS.
On my desktop I built a simple Excel 2013 workbook with PowerPivot Data Model that imported several tables from our Data Mart (server B above). Then created a Power View report. Locally everything works fine.
But when I uploaded this workbook to our SharePoint PowerPivot gallery and was trying to refresh data, I got the connection error: It’s very long but the ErrorCode is “rsCannotRetriveModel”. The end of the error message is:
'TemporaryDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source>
<Message>Call to Excel Services returned an error.</Message>
<MoreInformation><Source></Source><Message>We were unable to refresh one or more data connections in this workbook.
The following connections failed to refresh:ThisWorkbookDataModel</Message>
<MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>
We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh:ThisWorkbookDataModel</Message></MoreInformation>
</MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Our Excel Services on the SharePoint work fine and refresh data on different excel workbooks (with no Data Model) just fine. We are using an unattended account for Excel Services to connect from SharePoint server to our databases. Found a few references
on the topic, tried them but with no luck.
Please advise!
Regards
-Jeff
Jeff Gorvits

Hi Jeff,
Firstly, I need to confirm whether you are refreshing Data connection in browser, since Data Refresh is not supported in Office Web Apps. Please refer more information in this article:
http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx
From the error "Call to Excel Services returned an error", please verify the location of the
data source, for example an Excel workbook, is registered as a trusted location with Excel Services:
https://technet.microsoft.com/en-us/library/jj219699(v=office.15).aspx
Since you are using unattended account for Excel Services to connect from SP to databases, I wonder if the issue occurs to unattended referesh, if so, please refer to:
http://social.technet.microsoft.com/wiki/contents/articles/3870.troubleshoot-powerpivot-data-refresh.aspx#Problems_using_the_Unattended_data_refresh_account
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

New Video Card for Hp model h8-1300z

I'm hoping someone can confirm for me whether or not a graphics card I'm interested in installing is compatible with my h8-1300z model desktop? It looks like the specs match up, but a second opinion never hurts! Here is the card:
http://www.amazon.com/EVGA-GeForce-Dual-Link-Graphics-01G-P4-2751-KR/dp/B00IDG3NDY/ref=sr_1_4?ie=UTF...
Here are my computer specs:
AMD FX 6120 Six-Core processor 3.5GHz
6 GB Memory
Nvidia Geforce GT 630 (current graphics card I want to update from)
64-bit Windows 7
Thoughts are much appreciated!
This question was solved.
View Solution.

Silverstarre, welcome to the forum.
I checked with EVGA Tech Support and the card requires a UEFI BIOS in the computer. There may be a VBIOS update for the card, but you would have to call Tech Support and give them the specific model to know that for certain.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Model Confirmation

Similar Messages

Maybe you are looking for