Model distribution not possible in 4.7
Hello,
We have refreshed QAS client with client copy (data) from PRD system.
Afterwards, we created ALE model (BD64) in QAS and when we try to distribute it to DEV system we get an error:
"Client XXX is not available. Please choose an existing client".
If we create model in DEV, distribution to QAS works, but after finishing model setup, sending idocs from QAS to DEV fails with the same error:
"Client XXX is not available. Please choose an existing client".
In dev_rfc logs we can only see the same message:
**** Trace file opened at 20150126 122009 CET SAP-REL 640,0,155 RFC-VER 3 865711
======> Client XXX is not available. Please choose an existing client
ABAP Programm: SAPLBD22 (Transaction: BD64)
Called function module: MODEL_VIEW_REPLICATE
User: ALEUSER (Client: XXX)
Destination: DEVCLNT100 (handle: 4, 73508497, {54C4E81F-7BD3-051D-E100-0000AC180AF2})
**** Trace file opened at 20150126 123459 CET SAP-REL 640,0,155 RFC-VER 3 865711
======> Client XXX is not available. Please choose an existing client
ABAP Programm: SAPLERFC (Transaction: BD87)
Called function module: ARFC_DEST_SHIP
User: ALEUSER (Client: XXX)
Destination: DEVCLNT100 (handle: 1, 74404664, {54C4E9BD-7BD3-051D-E100-0000AC180AF2})
**** Trace file opened at 20150126 123619 CET SAP-REL 640,0,155 RFC-VER 3 865711
======> Client XXX is not available. Please choose an existing client
ABAP Programm: SAPLARFC (Transaction: BD87)
Called function module: ARFC_DEST_CONFIRM
User: ALEUSER (Client: XXX)
Destination: DEVCLNT100 (handle: 2, , {54C4E9BE-7BD3-051D-E100-0000AC180AF2})
Of course system is defined in SCC4, logical systems are correctly assigned.
Before client copy ALE worked ok.
Any ideas how to correct this error?
Best regards,
Sasha
Hi Raymond,
All is well in SM59.
Since we copied data only during client copy this conversion should have been already made during that process as is written in BDLSS. We did copy client from PRD to QAS before and we did not need to run BDLSS for ALE to run ok.
Could BDLSS resolve this?
Regards,
Sasha
Similar Messages
-
SRM 7 Contract Distribution not possible in PPS - is it true ?
Hi SRM Gurus,
I gather that the SRM 7.0 Central Contract are not distributed to ECC 6.04 in PPS environment.
( Ours is SRM 7.0 ECC 6.0 Enhp 4 with PI 7.11 on PPS - ECS.)
Correct me if i am wrong.
If so, is there any other way to distribute Central Contract to ECC . Even it its partial distribution.
Thogh, I hv config for CCTR following the SNote 1268821. To start the problem, the Distribution button on the header of the contract is disabled. CCTR tran type configured both in SRM and ECC.
Kindly share your thoughts.Hello,
You can try reverting the note 1354971, to get an assign distribution button active at item level.
Interfaces(XML) which are used to transfered the central contract are not extended to all the fields related to PPS functionality. Eg. Guaranteed Minimum.
These fields will not be transfered to backend and other process like release value updation to the backend contract has limitation as PPS funcalities can be used only in extended classic scenario.
So we have a limitation and also this functionality will not be supported in PPS.
Nevertheless, you can enable this funcationality and use with the limitation.
You will have to handle this through custom meta data handle where you need to create dynamic class and method and maitain in the customizing table /SAPSRM/V_MDA_HC. You can enable the Assign distribution button and link in the dynamic class.
You can check the configuration in the standard meta table /SAPSRM/V_MDA_HD for reference.
Courtesy : Lisa Norris!
Re: SRM 7 Contract Distribution not possible in PPS -
SRM 7 Contract Distribution not possible in PPS
Hi all,
We're on SRM 7 / ECC6 EHP3, and activated PPS. I have been told that for PPS the distribution is not supported completely, and hence the functionality is disabled, NOTE 1354971.
My problem is, since we have activated the PPS functionality in all the landscapes we have at present. I can not switch PPS off or refer to another system without the PPS. By reverting the note 1354971, i have only managed to get an assign distribution button active at item level. I would have assumed, the contract/GOA should be able to be distributed at header level. Consider a contract with 1000 items.
Can please someone tell me what is the process for distributing a contract completely. Not just selective items.
Moreover, this does not work, when i have outline items/sub items in the contract.
Regards
AliDear Ali,
Interfaces(XML) which are used to transfered the central contract are not extended to all the fields related to PPS functionality. Eg. Guaranteed Minimum.
These fields will not be transfered to backend and other process like release value updation to the backend contract has limitation as PPS funcalities can be used only in extended classic scenario.
So we have a limitation and also this functionality will not be supported in PPS.
As it was a bug , we have corrected this through the note 1354971.
Nevertheless, you can enable this funcationality and use with the limitation.
You will have to handle this through custom meta data handle where you need to create dynamic class and method and maitain in the customizing table /SAPSRM/V_MDA_HC. You can enable the Assign distribution button and link in the dynamic class.
You can check the configuration in the standard meta table /SAPSRM/V_MDA_HD for reference.
I hope this helps,
Kind Regards,
Lisa -
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
Hi! I went to the new Apple new shop and I was looking for a dock station/ speakers for ipod. Why is not possible to listen the models not in exhibition?! How can I decide?! Just the design?! It's stupid!
-
Assignment of single Sales group to multiple Sales offices not possible
Hi all,
We need to assign single sales group to multiple sales offices in CRM. When we try to assign a Sales group to more than one Sales office the first assignment between Sales group and Sales office is removed. Only the new assignment is available.
Instead of having two assignments I still only get one.
First I transfered the ECC organization as Standard backend integration. When I realize I needed multiple backend assignment I ran the Conversion to multiple assignments. However, I am not able to realize multiple assignments.
Is it not possible to realize multiple assignment if you first transfered the ECC organization as standard (single) assignment?
Please let me know how to overcome this problem.
Regards
AndersHello Anders,
Starting CRM 4.0 multiple hierarchy with this enhanced org data model
works the following way:
- 1 R/3 org data mapped to ONLY 1 CRM org unit.
- multiple hierarchy (1 sales office assigned to several sales org,
1 sales group assigned to several sales office) is managed in the detail
of the org unit with tab Function and with sub tab sales office
and sales group.
For example if you have following R/3 org structure:
Sales org SOr1
_ Sales office Sof1
_ Sales Group Sg1
_ Sales office Sof2
_ Sales Group Sg1
Sales org SOr2
_ Sales office Sof1
In PPOMA_CRM you have to do the following:
For the R3 mapping :
Sor1 mapped to org unit 50000001
Sor2 mapped to org unit 50000002
Sof1 mapped to org unit 50000003
Sof2 mapped to org unit 50000004
Sg1 mapped tp org unit 50000005
And for the multiple assignment
- For sales org 50000001 and 50000002 you just have to maintain in tab
function, sub tab Sales org the Distribution channel division values
- For sales office 50000003 in sub tab Sales office the assignment to
sales org Sor1 and Sor2
- For sales office 50000004 in sub tab Sales office the assignment to
sales org Sor1
- For sales group 50000005 in sub tab sales group the assignment to
sales office Sof1 and Sof2.
If you have different division distribution channel on sales office sale
group compared to the sales org you can maintain manually the values.
Or if is it always the same values you can use * value for distribution
channel division (in that case please read carefully notes
691015 and 735020 if needed)
In addition regarding report CRMC_R3_ORG_GENERATE I would like to
clarify that this report can only be used for initial download, as
written in the customzing documentation of this report (spro-CRM -
master data - org management - data transfer - Copy SAP R/3 sales
structure ) it can only be executed once and so following org
modifications have to be done manually in PPOMA_CRM.
So for this report the correct way to use it is to create all the R/3
org data in 1 shot.
If only 1 R/3 org data is already mapped to a CRM org unit in ppoma_Crm
you will have red light and so it will be impossible to create all
dependent org data.
Hoping i have been able to clarify how it works.
Regards, Gerhard -
Creation of new DC is not possible
Hello,
I'm working with Visual Composer on a CE 7.1 SP05 that is not currently configured to work with a DI server. I have a development component "mydc" in the shared repository that contains some models.
Whenever I want to create a new model in the shared repository, the system forces me to use the existing DC "mydc". The listbox for the development component offers only the value "mydc" and the button "New..." is inactive.
(When I create a model in the local repository, the "New..." button next to the DC listbox is active and I can create a new local DC.)
Please help me create a new DC in the shared repository.
Thanks and cheers,
Thorsten
Edited by: Thorsten Franz on Apr 16, 2008 6:27 PM to remove question on how to delete a DC in the shared repository - it's not possible in release 7.1.Hi Thorsten,
To creat a new DC in shared repository do the following:
1. Create a DC in the local repository
2. Go to manage models, click on the newly created DC and you would see the icon with blue + (tooltip: Add to the source control)
3. Your local DC is now your shared DC
Good Luck,
Dharmi -
Error Message: Creation of Temporary Table "#BIMC_SETS" not possible
Hello,
I am trying to get data from HANA Virtual Data Model (VDM) from MDX connection in MS Excel. The VDM Views and models are visitble after the connection is successfully made.
But when I try to fetch the data, I get the following error:
"Creation of Temporary Table "BIMC_SETS" is not possible".
Can someone let me know how to resolve this?
Best regards,
AkhilHi Lars,
I am getting the same error. We are trying to build a role for Adhoc reporting. The role has analytic privilege, object privilege with select on individual models in _SYS_BIC (models we want to expose and part of AP), object privilege on _SYS_BI with select and execute and also object privilege execute on REPOSITORY_REST.
I am able to execute the models using Lumira and Analysis for excel, however getting error with MDX connection.
Also we want to try and restrict direct ODBC access to HANA using query from excel. With the above privileges user is able to see all the M_ views and get data for it. Can we restrict this?
We are on SP6 rev 67.
Thanks,
Aamod -
Document being distributed no changes not possible and btadminh could not be locked
Hi All,
I am getting ERROR: "document being distributed no changes not possible" & WARNING:"BTadminH could not be locked" in CRM WEBUI while trying to edit the order.
I checked all the BDOCs and smq1, smq2 ,smw01 here are no queues stuck here.
I also run distribution check FM, whenever i run it will be unlocked and able to edit. but this is not the solution for me because this error and warning getting to every new order (transaction) .
thanks,
Vinnu.Hi,
Check the initial status settings, there should not be any distribution lock maintained.
Award point if it is helpful
Regards,
D Singh -
[SOLVED]wlan0 up - Operation not possible due to RF-kill
Hello everyone.
I've encountered trouble trying to activate my wlan0 interface and I was wishing that someone here might be able to help me.
$ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether
My attempt at trying to activate wlan0 renders the following;
$sudo ip link set wlan0 up
RTNETLINK answers: Operation not possible due to RF-kill
Unblocking everything with RF-Kill does not seem to change much in particular:
$rfkill list all
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: yes
$sudo rfkill unblock all
$rfkill list all
0: hp-wifi: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
Enabling/Disabling the wifi-button on my keyboard only changes the Hard Blocked-parameter of hp-wifi. The Soft block remains unchanged regardless of me trying to unblock all with rfkill.
The following is the output of dmesg | grep phy0
$ dmesg | grep phy0
[ 7.460715] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 7.465387] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected
[ 7.500363] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
dmesg | grep hp-wifi renders nothing.
Additional Information:
$uname -r
3.12.2-1-ARCH
Entire output of lsmod
Module Size Used by
hid_generic 1161 0
usbhid 40577 0
hid 90678 2 hid_generic,usbhid
arc4 2008 2
rt2800pci 11055 0
rt2800lib 74595 1 rt2800pci
rt2x00pci 2664 1 rt2800pci
rt2x00mmio 2945 1 rt2800pci
rt2x00lib 37807 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio
joydev 9671 0
eeprom_93cx6 2193 1 rt2800pci
mac80211 466554 3 rt2x00lib,rt2x00pci,rt2800lib
cfg80211 412854 2 mac80211,rt2x00lib
uvcvideo 72900 0
kvm_amd 52575 0
videobuf2_vmalloc 3280 1 uvcvideo
videobuf2_memops 2343 1 videobuf2_vmalloc
videobuf2_core 28027 1 uvcvideo
kvm 389125 1 kvm_amd
videodev 111140 2 uvcvideo,videobuf2_core
hp_wmi 7627 0
media 11751 2 uvcvideo,videodev
radeon 1284675 6
sparse_keymap 3154 1 hp_wmi
crc_ccitt 1371 1 rt2800lib
rfkill 15651 2 cfg80211,hp_wmi
r8169 58399 0
microcode 15216 0
evdev 10989 13
mii 4035 1 r8169
pcspkr 2035 0
k10temp 3058 0
psmouse 85428 0
ttm 63411 1 radeon
serio_raw 5049 0
rtsx_pci_ms 7266 0
drm_kms_helper 36286 1 radeon
memstick 7472 1 rtsx_pci_ms
drm 238206 8 ttm,drm_kms_helper,radeon
sp5100_tco 5824 0
thermal 8532 0
battery 6837 0
wmi 8419 1 hp_wmi
i2c_piix4 10592 0
snd_hda_codec_realtek 40772 1
i2c_algo_bit 5399 1 radeon
i2c_core 24164 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
ac 3332 0
acpi_cpufreq 10779 0
video 11228 0
snd_hda_intel 36904 0
shpchp 25465 0
button 4677 0
snd_hda_codec 149633 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5450 1 snd
processor 24935 3 acpi_cpufreq
ext4 474187 4
crc16 1367 1 ext4
mbcache 6082 1 ext4
jbd2 83504 1 ext4
sr_mod 14898 0
cdrom 34848 1 sr_mod
sd_mod 30789 6
rtsx_pci_sdmmc 14332 0
mmc_core 95691 1 rtsx_pci_sdmmc
ahci 22896 5
libahci 21401 1 ahci
rtsx_pci 32049 2 rtsx_pci_ms,rtsx_pci_sdmmc
libata 170792 2 ahci,libahci
ehci_pci 4000 0
ohci_pci 4072 0
ohci_hcd 23937 1 ohci_pci
ehci_hcd 59220 1 ehci_pci
usbcore 180136 6 uvcvideo,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
scsi_mod 130669 3 libata,sd_mod,sr_mod
usb_common 1656 1 usbcore
Entire output of lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320]
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:15.3 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 (rev 43)
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
07:00.0 Network controller: Ralink corp. RT5390 Wireless 802.11n 1T/1R PCIe
It is worth mentioning that this problem has remained persistent throughout multiple linux distributions that I've tried on my laptop. The Wifi works fine in Windows 7 but as soon as I switch to any linux distro it stops working.
I intend to put your advice to good use so any help would be very appreciated.
Last edited by FunkDojo (2013-12-05 13:02:45)As I can see you have two wireless interaces, when i see only phy0 with rfkill, it's maybe your hp-wifi that force to disable phy0 interace. I think if you blacklist the driver it might allow phy0 to be enabled.
Please download and install lshw available in the community repo and enter in a terminal :
$ lshw -c network
Last edited by maxarsys (2013-12-05 06:26:05) -
I purchased an AE to connect to my Zeppelin(old type) to enable me to play my itunes library through it using Ipad/Iphone remote as i do with Apple TV/Mac etc but despite all efforts(spent 2 hours on phone with Apple support) still will not connect. I popped into Apple shop today in Liverpool and the guy there said what i want to do is not possible via the Zeppelin, having done some research i thought he was wrong.Any ideas?
There are various ways to add a laserjet to a network.
What brand and model is the wireless router?
What operating system does the computer use (preferably one that is on the same wireless network the printer is intended for)?
Does your network use a DHCP server (most home routers have this enabled by default)? If so, is there any reason you want to use a static IP address over DHCP for your network?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
HR ALE org model distribution - multiple business partners created
Hi,
I am experiencing weird problems with HR ALE org model distribution to CRM 7.01. It creates multiple business partners for some org units and some persons. However, it does not create them everyone. Right now it seems like a new business partner is created on every second destribution in update mode. Does anyone have an idea what might be wrong? In my understanding no new business partners should be created, rather the existing ones should be recognized and updated.
There is just one IDoc warning saying there was an error calling function module BUPR_EMPLO_ADDR_ADD because parameter value IV_X_SAVE has changed. This warning apperas everytime, also when no new business partner is created. Thus I am not sure if this is important. Also I do not use any custom coding, so I don't think that I am causing this warning.
Thanks a lot
AP
Edited by: linex83 on Mar 26, 2010 10:45 AM
Edited by: linex83 on Mar 26, 2010 10:46 AMI just discovered a part of the problem. In CRM the relationship between the organisation unit and its business partner gets deleted if it already exists. On next update a new business partner is created, because there is no business partner assigned to the organisation unit yet.
It would be interesting to know why the relationship is deleted. Also I am not sure that it happens to all organisation units. Furthermore the same problem exists for persons. -
Hi experts,
I'm having a problem when our project approaching the end.
If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
It works fine,and the user can logon the web ui.
Now I created a new organization model and position,assigned the business role and user to the position.
A PFCG role was also assigned to the business role:
Then I removed all the roles and profiles in user master in SU01.
The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
Can anybody suggest what the problem is? Is there any other settings I should make?
I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
Am I correct?
Thanks.
JerryJerry, yes, you're right.
Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
1. From user's parameter CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
If CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE); -
RFC_ERROR_SYSTEM_FAILURE - - Access via NULL object reference not possible
Hi,
RFC was working fine , suddenly starting showing error below ( not sure if i changed anything ) -
Rest of the RFC's in the same app are working fine.
The error throwed is -
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
Full error details -
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
at com.sap.xss.per.fc.persinfo.FcPersInfo.onCleanup(FcPersInfo.java:561)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.onCleanup(InternalFcPersInfo.java:798)
at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.onCleanup(FcPersInfoInterface.java:246)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.onCleanup(InternalFcPersInfoInterface.java:299)
at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.onCleanup(InternalFcPersInfoInterface.java:459)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.cleanUp(FPMComponent.java:644)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$1000(FPMComponent.java:78)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.exitCalled(FPMComponent.java:963)
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.exitCalled(FPMComponent.java:1134)
at com.sap.pcuigp.xssfpm.wd.BackendConnections.wdDoExit(BackendConnections.java:124)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalBackendConnections.wdDoExit(InternalBackendConnections.java:228)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingCustomController.doExit(DelegatingCustomController.java:77)
at com.sap.tc.webdynpro.progmodel.controller.Controller.exitController(Controller.java:180)
at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
at com.sap.tc.webdynpro.progmodel.controller.Component.exitController(Component.java:251)
at com.sap.tc.webdynpro.progmodel.controller.Controller.exit(Controller.java:154)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.exit(ClientComponent.java:219)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.exit(ClientApplication.java:474)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.destroy(ClientApplication.java:527)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.destroy(ApplicationSession.java:398)
at com.sap.tc.webdynpro.clientserver.session.ClientWindow.destroyApplicationSession(ClientWindow.java:235)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doDestroyApplication(ClientSession.java:1003)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doSessionManagementPostProcessing(ClientSession.java:789)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:264)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:219)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Cleanup(HRXSS_PER_MAC.java:331)
at com.sap.xss.per.model.mac.Hrxss_Per_Cleanup_Input.doExecute(Hrxss_Per_Cleanup_Input.java:137)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
... 43 more
Thanks,
Regards,
AnkitHello Vaish & Ankit,
Can you check what is the dump occurred in transaction ST22?
I hope you guys are working with HR data. So, i think some object is not passed(internally) correctly in RFC.
Please debug the RFC by keeping the breakpoint from webdynpro application, then you will come to know what is not passed when we execute the RFC from R/3.
Regards
Nizamudeen SM -
PC Suite 7 – Data transfer not possible. Check dat...
When I try to use (open, update, modify etc.) the “contacts list” in PC suite version 7.0.7, I always have the following error: “Data transfer not possible. Check data connection”. Instead the SMS list works fine. My phone is Nokia 6267.
Anyone has a solution?
Best Regards
Bix123Hi everyone,
I had the same problem for months with many PC Suite versions & both XP service packs until I tried a phone setting just for testing and everything worked out fine In my phone (3110c) under Settings / Connectivity / Data Transfer / PC Sync, I filled in a random User name & Password and voila!!! All contacts copied just fine!!! I hope this works with other models with the same menu as well. It looks that it's not a PC Suite problem after all (at least for me that is).
Hope I helped you guys
Spiros
Greece -
I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine. Can I change the present Videocard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible? I have upgraded the memory to 4 GB 667 MHz DDR2 SDRAM.
The GPU in a iMac is NOT upgradeable.
You should check to see if your model of iMac meets the minimum specs to run FCPX.
I believe that your GPU is NOT OpenCL capable, and hence not supported.
Even if it works, you would probably get marginal performance.
What you can do is download the trial version and see how (and if) it works.
Maybe you are looking for
-
How do I deactivate one of my computers from my itunes account when I no long have access to the computer?
-
Can't Install ATI Video Drivers on Bootcamp with Windows 7 64-bit
I've just installed Windows 7 64-bit under Bootcamp but can't seem to get any ATI Graphics drivers to install. I ran into the common blank-screen problem during installation and temporarily solved that by deleting atikmdag.sys from within Lion. At th
-
How do i sync outlook notes with iphone notes?
I need to sync notes from Outlook 2010 to my iphone note section and back again. I want the same notes to appear on all my devices. Windows 7, Macbook Pro, iPad and iPhone 4. Any suggestions?
-
Query about crystal reports............
Hello Experts, I am creating the Crystal Report which has a parameter with data type nvarchar,which is not getting linked with report. How can I map this parameter to obtain the result? With Regards Prashant Muke
-
Installing LV 8.2 on Vista64. Unable to install - "regsvr32.exe on msi.dll"
Running Vista64, trying to Install LV8.2 . This version works fine on xp, win7, and 2 vista machines (I tested them) but not on this machine. It is a windows error, and I have posted on their boards as well, but I figure ask here since the quality