Model e51 problem in restoring data from old 2GB t...

i am using nokia e51 last 1year its working fine.i would like to upgrade my memory from 2 GB to 4GB and i bought it from nokia orginal accessories.before upgrading my memory card i made backup with nokia pc suit the backup also made perfectly.then i removed my old memory card 2GB and replaced with 4GB new one after the proper instalation i try to make a resotre from my pc suit,end of the restoring process it's showing all the things are restored. After the proper disconnect from the computer the contacts and calender only restored other things are not restored my new memory card4GB like gallery,user files from memory card andmessages.if i put my old 2GB memory card every thing is there.The datas are not stored in my new memory card
I need immediate help from the experts or who know to solve the problem
Thanking you
Riyaz Ahamed

Try restoring your new iPhone with iTunes from your previous iPhone's backup.
Restoring your iPhone with iTunes will completely erase your iPhone first followed by the firmware being re-installed. After the firmware is re-installed, you will be prompted to restore your iPhone from an available backup, which is the default selection. If there is more than one iPhone backup available, you can select from the available backups. This must be followed by a sync to transfer your selected iTunes content including 3rd party apps, and any photos selected to be transferred from your computer to your iPhone.

Similar Messages

Restoring Data from old phone to S III and getting Yahoo E-Mail to work on the Galaxy S III

I wanted to share some information on how to do a few things on the Galaxy SIII. After spending approximately 6 hours on the phone and On-Line Chat with Verizon Wireless Tech Support they told me the following things could not be done. Well FOR THE RECORD they CAN BE DONE!!!!!
Here is how to Back-up and Restore your Text, Picture and Video messages from your old phone to your new phone:
BEFORE you DEACTIVATE the OLD PHONE:
Make sure you have an External SD card in your old phone that will work in your new phone
Go to the Play Store and install Verizon Messages
Open the Verizon Messages program and click on Back-UP – ALL Text, Picture and Video messages will be backed-up. IF YOU GET A “SAVE CANCELLED” MESSAGE:
                     You may have to Back-up LARGE messages (with picture & Video content) individually.
                    You may also have to backup conversation threads 1 at a time if there are a large number of texts in that thread:
     *****Hopefully Verizon will fix AND INCREASE the LOW AMOUNT OF DATA ALLOWED AT 1 TIME ON THIS APP SOON*****
Once you have everything Backed Up on the External SD Card Remove the SD Card from the old phone and install it in the new phone
NOW ACTIVATE YOUR NEW GALAXY S III:
When you are in the Set-Up Wizard:
           If you are using Yahoo E-Mail and want it to be accessible by clicking on the E-Mail Icon
               DO NOT click on the Yahoo Mail Icon during the E-Mail Account Set-up portion of the Set-Up Wizard!!!
         Instead click on the Other E-Mail Icon and enter your Yahoo E-Mail accounts there – this will assure that the Yahoo E-Mail accounts will
               sync and update as they should AND be accessible by just clicking on the E-Mail Icon on your screen.
To Restore your data from the Old Phone to the New Phone After the Set-Up Wizard is completed:
Make sure you have the External SD card from your old phone installed in your new phone
Go to the Play Store and install Verizon Messages
Open the Verizon Messages program and click on Restore – IF YOU SEE 2 SD CARDS LISTED (ON MINE IT LISTED ExtSDCard and SDCARD0) you will have to copy EVERYTHING from the ExtSDCard to the SDCard0. Next Click on Restore again and ALL Text,
Picture and Video messages will be restored to your New Phone.
I HOPE THIS SAVES YOU ALOT OF AGGRAVATION AND FRUSTRATION WITH YOUR NEW GALAZY S III

What type of mail account is it?
POP, IMAP, etc?
When you got your new phone did you put on a backup of your old phone?
If POP, well POP works by keeping track of what it has downloaded or not. So if it got info from your last phone when you synced your new one, then it knows it already downloaded them, thus won't download them again (just how POP works).

Restoring data from old iphone

Hi! I had a 3g 16 gb iphone that was destroyed. My insurance payed for a new one, but when I connected it, itunes asked me if I wanted to merge the data stored from my old phone into it or if I wanted to treat it as a new one. I chose the merging option, but then it said that, because it had version 2.0 in it, I had to first update and that then I would have the option to put the information from my old iphone into it. I did update, and now I can´t see how I can make the old data merge into my new phone.
Thanks in advance for your help

Try restoring your new iPhone with iTunes from your previous iPhone's backup.
Restoring your iPhone with iTunes will completely erase your iPhone first followed by the firmware being re-installed. After the firmware is re-installed, you will be prompted to restore your iPhone from an available backup, which is the default selection. If there is more than one iPhone backup available, you can select from the available backups. This must be followed by a sync to transfer your selected iTunes content including 3rd party apps, and any photos selected to be transferred from your computer to your iPhone.

How can I restore data from my iCloud account on a new iPhone 5c with a previous SW version that my old (stolen) iPhone 5?

Hello everybody,
I need help to restore data from my iCloud account on an unused iPhone 5c because my iPhone 5 with a newer iOS update was stolen. When I try I get a message that I cannot retore my data because the iOS on my iPhone 5c is an older version than on the stolen iPhone 5.
There must be a way to do this. I hope to hear from you
thanks!

Welcome to Apple Support Communities
You cannot. However, you can solve this problem by setting the iPhone as a new device and upgrading iOS in Settings -> Software Update.
After upgrading iOS, open Settings -> General -> Reset -> Erase All Content and Settings. Finally, Setup Assistant will let you restore the backup.

Easiest way to transfer contacts/data from old phone (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One phone is still using iOS7 (is that a problem?, other is iOS 8.1.

What is the best/safest way to transfer contacts/data from old phones (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One of the old phones is still using iOS 7, will that be a problem? (the other has iOS 8.1).

The following has instructions on how to transfer to a new iPhone using either iCloud or iTunes: Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

Just got new macbook pro (13inch) and restored all data from old mac via time machine. Now whenAudio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do?

Just got brand new macbook pro (13inch) and restored all data from old mac via time machine. Now when I p/back a track in logic I get audio drop out for 3-4 secs every 10 - 15 secs!! What is going on and what can I do? Its the same version of logic and all other functions seem fine!

First of all, why did you say yes to Nero Back up before researching what it does with files already on the HDD? When I install Nero, the Back Up is the first thing I disable, it is a nagging pain, there are much better backup programs available. There are several file recovery programs out there to recover deleted files, that is, if that is what happened. Also, if you haven't overwritten the files, so you should be able to find them.

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

I've just upgraded to iPhone 4S and restored data from my old iPhone through iTunes. I'm being asked for a password to get into my phone and the old password I had doesn't work. I don't know what password it's looking for

Thanks for replying, I'm a real techno-cretin. What do you mean by not using the backup? I'm busy trying to restore my new phone and it's doing a 6 hour download with updates. Can I restore the data from my old phone backup onto the new iPhone 4S when the download is done?

How do I restore data from recovered hard drive?

In a nutshell-
Hard drive failed. We had it replaced, and recovered data from old hard drive, put it on an external hard drive. Now we want to put that data onto the new hard drive.
Is it as simple as dragging it over?
We're missing most of the software that came with our computer when we first bought it. We can't find the software installation disk, but we do see application icons from the recovered data. We do have the Software disk from a Mac mini. Can we use this disk? It seems like there has to be a way to get the software we had before the crash without paying to have it done.
I thank you, in advance.

You cannot use the discs from a Mac Mini--you have to have the exact discs for your iBook G4. These discs are very machine specific.
That said, you can try bringing over the various applications from your external drive. The only potential problem is that because the old drive failed, there could be some software corruption.
If you can locate your original discs and install the software from them, that would be ideal. If you can't, you can get replacement discs from Apple for a fee.
As for the data, you should be able to just drag it over.
Good luck!

How to backup data from old droid to turbo?

The turbo is not listed for new devices. How do you backup data from old droid to new turbo?

To start your backup: Sign in to your Google Account from your old Droid phone and do the following:
1. Go to Settings, Personal, Backup and reset, and.
select both Backup my data and Automatic restore.
2. Go to Settings, Personal, Accounts & Sync,
and select your Google account.
3. Select all of the option boxes listed, to ensure that
all available data is synced. After backing up your information, you will be able to set-up and sign in to your regular Google account from your new Turbo and all of your information can be transferred to the Turbo.

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Problem with restoring database from backupset

Hello,
I'm newie in working with RMAN and I have problem with restoring database from backup set in my testcase.
I've restored controlfile, but I couldn't restore database - it fails with:
RMAN-00571: =============================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS
RMAN-00571: =============================================
RMAN-03002: failure of restore command at 08/31/2006 12:06:47
ORA-01180: can not create datafile 1
ORA-01110: data file 1: 'C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF'
List of backupsets from restored controlfile
(I restored controlfile by command: restore controlfile from 'C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP'; -- I have disabled controlfile autobackup, therefore I couldn't restore from autobackup);
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
I can successfully crosscheck backup sets (by command crosscheck backup), but I couldn't restore database.
Path C:\ORACLE\ORADATA\LOCA10G2\ exists and I have right privileges.
Output of command restore database validate:
RMAN> restore database validate;
     Starting restore at 31-AUG-06
     allocated channel: ORA_DISK_1
     channel ORA_DISK_1: sid=102 devtype=DISK
     data file 1 will be created automatically during restore operation
     data file 2 will be created automatically during restore operation
     data file 3 will be created automatically during restore operation
     data file 4 will be created automatically during restore operation
     restore not done; all files readonly, offline, or already restored
     Finished restore at 31-AUG-06
What's wrong?
Thanks
     Paul

Hi,
I think, that everything seems to be OK.
Commands which I use to validation of existence backup:
RMAN> crosscheck backup;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=102 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP recid=36 stamp=599744172
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP recid=37 stamp=599744183
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP recid=38 stamp=599918805
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP recid=39 stamp=599918805
Crosschecked 4 objects
RMAN> list backup summary;
List of Backups
===============
Key TY LV S Device Type Completion Time #Pieces #Copies Compressed Tag
36 B F A DISK 29-AUG-06 1 1 NO 01_CTL
37 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
38 B A A DISK 29-AUG-06 1 1 NO TAG20060829T113804
39 B F A DISK 29-AUG-06 1 1 NO TAG20060829T113622
RMAN> list backup;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
36 Full 6.98M DISK 00:00:02 29-AUG-06
BP Key: 36 Status: AVAILABLE Compressed: NO Tag: 01_CTL
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
Control File Included: Ckp SCN: 578469 Ckp time: 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 322.96M DISK 00:00:27 29-AUG-06
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSTEM01.DBF
2 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\UNDOTBS01.DBF
3 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\SYSAUX01.DBF
4 Full 578481 29-AUG-06 C:\ORACLE\ORADATA\LOCA10G2\USERS01.DBF
BS Key Size Device Type Elapsed Time Completion Time
38 650.50K DISK 00:00:00 29-AUG-06
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113804
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
List of Archived Logs in backup set 38
Thrd Seq Low SCN Low Time Next SCN Next Time
1 32 577277 29-AUG-06 578529 29-AUG-06
BS Key Type LV Size Device Type Elapsed Time Completion Time
39 Full 7.02M DISK 00:00:00 29-AUG-06
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20060829T113622
Piece Name: C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
Control File Included: Ckp SCN: 578493 Ckp time: 29-AUG-06
SPFILE Included: Modification time: 28-AUG-06
RMAN> restore database validate;
Starting restore at 04-SEP-06
using channel ORA_DISK_1
data file 1 will be created automatically during restore operation
data file 2 will be created automatically during restore operation
data file 3 will be created automatically during restore operation
data file 4 will be created automatically during restore operation
restore not done; all files readonly, offline, or already restored
Finished restore at 04-SEP-06
Is something wrong? After crosscheck backup set with system datafile is AVAILABLE.
If i tried to test existence of backup pieces on disk and permissisons - everything is OK too:
C:\>dir C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\
Volume in drive C has no label.
Volume Serial Number is E003-9FC6
Directory of C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29
29.08.2006 11:38 <DIR> .
29.08.2006 11:38 <DIR> ..
29.08.2006 11:38 666 624 O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
29.08.2006 11:36 7 340 032 O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
29.08.2006 11:37 7 372 800 O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
29.08.2006 11:36 338 657 280 O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 File(s) 354 036 736 bytes
2 Dir(s) 56 865 202 176 bytes free
C:\>copy C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\ C:\ORACLE\ORADATA\LOCA10G2\
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_ANNNN_TAG20060829T113804_2H82QYOV_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCNNF_01_CTL_2H82NDQT_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NCSNF_TAG20060829T113622_2H82OW77_.BKP
C:\ORACLE\FLASH_RECOVERY_AREA\LOCA10G2\BACKUPSET\2006_08_29\O1_MF_NNNDF_TAG20060829T113622_2H82NQ58_.BKP
4 file(s) copied.
Thanks
Pavel

Restore Data from Datafiles

Hi Experts,
I am facing a problem with TTS(Transportable Tablespace).
I have a backup of tablespace TBS_DATA as TTS. Now i need to restore that tablespace.
Whenever I tried to restore using IMP command below error occured:
IMP-00003: ORACLE error 19721 encountered
ORA-19721: Cannot find datafile with absolute file number 123 in tablespace TBS_DATA
ORA-06512: at "SYS.DBMS_PLUGTS", line 1730
ORA-06512: at line 1
The TTS backup was not taken by me and i think that the dump file version and the version of backed up datafiles were not same (as I am sure that no datafile is missing in my par file and I simulated a test in which i took a TTS exp then made some change in the tablespace then tried to restore that tablespace got the same error as above).
Now under this scenario my question is,
"Is there any way to restore data from those datafiles ?(i know all the table names and structures)"
BR
obaid

obu wrote:
Hi Experts,
I am facing a problem with TTS(Transportable Tablespace).
I have a backup of tablespace TBS_DATA as TTS. Now i need to restore that tablespace.
Whenever I tried to restore using IMP command below error occured:
IMP-00003: ORACLE error 19721 encountered
ORA-19721: Cannot find datafile with absolute file number 123 in tablespace TBS_DATA
ORA-06512: at "SYS.DBMS_PLUGTS", line 1730
ORA-06512: at line 1
The TTS backup was not taken by me and i think that the dump file version and the version of backed up datafiles were not same (as I am sure that no datafile is missing in my par file and I simulated a test in which i took a TTS exp then made some change in the tablespace then tried to restore that tablespace got the same error as above).
Now under this scenario my question is,
"Is there any way to restore data from those datafiles ?(i know all the table names and structures)"
BR
obaidWhen you talk about transportable tablespace and "backup" and importing -- I'm not sure exactly what you are doing and what you have to work with.
Let's start by you showing the actual command you used that produced the output you gave us.
And it certainly wouldn't hurt if you let us in on the secret of what OS and what version of Oracle you are using.

Accessing data from old hard drive connected to HP Pavillion 500-242ea

Recently i purchased HP Pavillion 500-242ea ( OS Windows 8.1) as my old pc died.I connected the old hard drive via Usb adaptor kit.The old drive shows up in device manager and file explorer and disk management as F drive but does not show volume. I know the old drive is not full and the drive is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.Any one know how to access data from old drive which has IDE cable.
Please help need to copy imporatant files from old drive.
Thank you
This question was solved.
View Solution.

Just had to ask, do you know the difference between hard drive and CD/DVD drive? Don't get angry, read this.
You said " I know the old drive .......... is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.'
All that implies a CD/DVD drive. You can not put a disc into a hard drive.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

recently bought a new ipod, but would like to transfer my game data from old ipod onto new one. can i do this without losing any information?

Are you sure? I restored my new iPod from the backup of my iPad and all app data was restored to the new iPod.. App data is part of the backup.
iPhone and iPod touch: About backups

Transfering data from old iPod Touch to new

Just picked up a new iPod Touch 4G, wanted to know if there is a way to transfer my data from my old 3G one to my new one. Would it be possible to do a back up of my old one and restore it to my new one or is there a function in iTunes I'm missing?

That did the trick! I plugged in the new one and it asked me if I wanted to start it as new or restore data from a back up.
Thanks for the help, Sally!

Model e51 problem in restoring data from old 2GB t...

Similar Messages

Maybe you are looking for