Model entry point 'test uuts' could not be executed error -18002
Hi,
I am running a testand(2.0.1f1) sequence of labview (7.0) steps and it is working perferctly in my computer , but when installing testand and labview in another computer and I try to run my sequence the next message appears. "model entry point 'test uuts' could not be executed error -18002"
Is anyone that has an idea of what is happening here?
Thanks =)
Eren
Hi Eren,
You might try mass compiling the TestStand folders so that all VI's are at the same Version. TestStand 2.0.1f1 installs VI's that are at ver5.1.1
When you run from the Entry Point eg "Test UUTs", before the sequence executions all VI's in all the sequence contained in the sequence file are loaded in to memory.
Look at the error message again, it should be telling you which step in which sequence of the sequence file is not executable.
Hope this helps
Ray Farmer
Regards
Ray Farmer
Similar Messages
-
Entry point 'Test Batch' does not exist
Hi Forum
I am in the process of upgrading one of our testsystems from TestStand version 3.1 to version 4.1.
The system is started up by a Labview app which calls TS by a command line call (-runEntryPoint "Test Batch" "C:\..."). However, TS 4.1 doesn't recognize the "Test Batch" entry point (worked fine in 3.1), and I get an error box with the message "entry point 'Test Batch' does not exist". I have checked that the entry point exist in the sequence model file, and if I go to the "Execute" menu, I get the choice to run "Test Batch".
I am able to se the -run command, but then I, for some reason, don't get the entire sequence.
Any suggestions to what I am doing wrong? I am logged in to TS automatically with my windows login.
B.R.
Martin
Solved!
Go to Solution.Hi,
There should be a document in \Conponents\NI\Models\... which should give you the basics for the various process models.
here is some other references that may help
http://zone.ni.com/devzone/cda/tut/p/id/7958
http://digital.ni.com/public.nsf/allkb/D9E7A0BDDDA2A87886256FD9007598D2
Check out some of the related links
http://zone.ni.com/devzone/cda/tut/p/id/3819
Regards
Ray Farmer
Message Edited by Ray Farmer on 09-24-2009 11:00 AM
Regards
Ray Farmer -
At start up I get the error message - The procedure entry point xml TextReaderConstName could not be located in the dynamic link library libxm12.dll. I have uninstalled it and reinstalled but it does not fix the problem. Happened after Itunes update I think.
It's a simple fix and doesn't involve reinstalling anything.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck -
When I installed CS6 trial version and started from start menu and clicked Adobe photoshop CS6, I get this message.
The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll
How to resolve it?Either your OS is damaged, or doesn't meet the minimum requirements for Photoshop CS6.
-
When I click on the Mozilla icon on my desktop, I get the error message "The procedure entry point is Threaddesktopcomposited could not be located in the dynamic link library USER32.dll.
== This happened ==
Every time Firefox opened
== I upgraded to the new version of firefox today (7/16/10)This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
http://support.microsoft.com/kb/969155 - On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll” -
I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll" Any ideas what my problem is?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
i need help. every time i turn on my laptop an error message pops up: the procedure entry point sqlite_wao -checkpoint could not be located in the dynamic link library SQLite3.dlll HOW DO I FIX THIS?
Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
REPLICAT ERROR(The procedure entry point long jmp could not be located )
Hi,
I am getting the following error
The procedure entry point long jmp could not be located in the dynamic link library orauts.dll
Does anyone know anything about this? please help.
Thanks
Vi googled to the solution before i got to the answer but thanks anyway... you are right i changed my oracle home yesterday...today i had to reset to make this work...
Thanks
Venkat -
itunes not getting started getting " The procedure entry point AVCF playerenabledhardwareaccelerationkey could not be located in the dynamic link libraryAVFoundationCF.dll how to fix?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Since iTunes updated my PC my other devices are not seen and I keep getting message "The procedure entry point sqlite 3_wal_checkpoint could not be located in the dynamic link library SQLite 3.dll", how do I get my other devices to be found? or do I have to remove all Apple software.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
this is the only error message that comes up, then Firefox opens up
This issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
http://support.microsoft.com/kb/969155 - On a Windows XP-based computer with Family Safety installed, you receive an error message: “The procedure entry point IsThreadDesktopComposited could not be located in the dynamic link library USER32.dll” -
I had to uninstall prior version of iTunes to install IOS5 in my iPhone 4 (relatively new phone, only about 5 weeks old). It took several attempts to install IOS 5, and I finally succeeded only after disableing Kaspersky AV and the Windows Firewall. This, even though the iTunes connection diagnostics reported everything was OK, no errors and all green indicators. I had opened iTunes as Administrator too. So, now I have IOS 5 installed and running ok on the iPhone4, but I have a new problem on my PC that arose from all the different attempts to get this done. Here's more detail on the procedures and system changes I had made on my PC, and then what I get for the error msg.
1) As Instructed by an Apple rep, I UNINTSTALLED both iTunes and Quicktime. I then rebooted and ran iTunes in Admin mode, used the Connection diagnosis (reported all OK) and then tried to install IOS 5 on my iPhone4. The download (which would take between 30-45 minutes on each attempt) would fully complete and then I'd get an error msg of "server timeout". This led to further advice from Apple telling me to try the download again, this time with AV and Firewall disabled. So I rebooted again, disabled AV and Firewall and the IOS5 succeeded.
2) However, ever since I had removed both iTunes and Quicktime and reinstalled (only) iTunes (so far), each time I reboot my pc I get the following:
A Window opens with title: "Apple Sync Notifier exec Entry Point Not Found". Within the box below the title the following error msg appears: "The procedure entry point SQlite3_wal_checkpoint could not be located in the dynamic link library: SQlite3.dll"
I performed a search for SQlite3 in My Computer. It indeed shows up in a number of places, including within an Apple folder.
I'm using 64bit Win7 Home Premium SP1 on a PC with AMD Phenom II X4 945 Processor, 3 GHz with 8.00 GB RAM.
All iPhone and other applications seem to be behaving normally. I just have to hit "OK" to get rid of that annoying (new) error message that is apparently coming about during the PC startup process. It does NOT recur if I put the system in sleep mode, enter and exit iTunes, etc. It only occurs on reboot.I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
the procedure entry poin xmlTextReaderConstName could not be located in the dynamiclink library libxml2.dll
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
On my computer when I turn it on I get this response - entry point squilt3-wal-checkpoint couldnot be located in the dynanamic SQLite3.dll.
Thahks for any helpHi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy -
The problem described in my question above occurred when I accidentally clicked on the Firefox while it was installing updates or was starting, etc. Then the second notice appears stating that windows was not able to correct the problem and the program will be closed.
The problem described in my question above occurred when I accidentally clicked on the Firefox while it was installing updates or was starting, etc. Then the second notice appears stating that windows was not able to correct the problem and the program will be closed.
Maybe you are looking for
-
MD06 Issue - Planned orders not getting displayed
Hello, Planned order with the exception "Newly created order proposal" does not get displayed in MD06 with the option "Only Unprocessed MRP Lists" in the processing indicator. I am running MD06 report with the following parameters: Plant MRP Controll
-
I have used Thunderbird for years as I am a business owner who needs to keep a copy of old emails. I have just changed from a PC to a Macbook pro, and want to move all my old archived messages from the past 2 or 3 years to my Mac, including non-archi
-
How can I reinstall Safari after losing it completely on my Mac Pro?
Somehow I deleted Safari from my MacBook and there is no trace of it on my computer. I am trying everything and failing. Please help! Thank you in advance!
-
i have microsoft office but i can figure out how to make a document where it takes an 8 1/2 by 11, landsape, print on both sides and make it into colums. if anybody could help me that would be great!
-
OS X 10.8.1 Mail issue
Dear Apple Community, after the OS X 10.8.1 update Mail can't refresh my accounts (Hotmail POP & Microsoft Exchange IMAP). If I press the refresh envelope nothing happens. Only a strange "piep" noise appears. Recreating the accounts did not help! My