Model Name:iMac   Model Identifier:iMac4,1   Processor Name:Intel Core Duo   Processor Speed:2 GHz   Number Of Processors:1   Total Number Of Cores:2   L2 Cache (per processor):2 MB   Memory:2 GB   Bus Speed:667 MHz   Boot ROM Version:IM41.

Hi my name is Mirko,
i just broth a I Mac today i was wandering if was possible upgade with the Leopard snow
could do you tell me if i can.
Thanks

Click here, install the DVD, and run Software Update.
(112067)

Similar Messages

  • This is what i have:eMac Machine Model:     PowerMac6,4   CPU Type:     PowerPC G4  (1.5)   Number Of CPUs:1   CPU Speed:     1.42 GHz   L2 Cache (per CPU):     512 KB   Memory:512 MB   Bus Speed:     167 MHz   Boot ROM Version:     4.9.2f1? can i update

    this is what I have
    eMac
      Machine Model:          PowerMac6,4
      CPU Type:          PowerPC G4  (1.5)
      Number Of CPUs:          1
      CPU Speed:          1.42 GHz
      L2 Cache (per CPU):          512 KB
      Memory:          512 MB
      Bus Speed:          167 MHz
      Boot ROM Version:          4.9.2f1
    can i update to snow leopard?? and how?  im having a hard time its my first mac.   I need to to create documents, Im trying to avoid buying a new computer.

    You cannot upgrade to snow leopard. Snow leopard was the first of os x to drop support for the motorola ppc processors. The latest you could possibly run would be leopard.
    Hope it helps,
    Ryan

  • I have a Mac with software version 10.5.8  My hardware overview:    Model Name:     iMac   Model Identifier:     iMac8,1   Processor Name:     Intel Core 2 Duo   Processor Speed:     2.8 GHz   Number Of Processors:     1   Total Number Of. I is it poss to

    I have a Mac with software version 10.5.8  My hardware overview:    Model Name:          iMac   Model Identifier:          iMac8,1   Processor Name:          Intel Core 2 Duo   Processor Speed:          2.8 GHz   Number Of Processors:          1   Total Number Of. I is it poss to upgrade to Lion.

    Yes. You need to purchase Mac OS X 10.6 on DVD first.
    (62528)

  • My early (white plastic) 2006 imac freezes.  I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:     iMac   Model Identifier:     iMac4,1   Processor Name:     Intel Core Duo   Processor Speed:     2 GHz  

    My early (white plastic) 2006 imac freezes.  I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:          iMac  
    Model Identifier:          iMac4,1  
    Processor Name:          Intel Core Duo  
    Processor Speed:          2 GHz  
    Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze.  Please help.

    If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.

  • Safari stops working about 5 minutes after I log in rHardware Overview:    Model Name:     iMac   Model Identifier:     iMac11,3   Processor Name:     Intel Core i3   Processor Speed:     3.2 GHz   Number Of Processors:     1   Total Number Of Cores:     

    Hardware Overview:
      Model Name:          iMac
      Model Identifier:          iMac11,3
      Processor Name:          Intel Core i3
      Processor Speed:          3.2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          4 MB
      Memory:          4 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          IM112.0057.B00
      SMC Version (system):          1.59f2
      Serial Number (system):          W8039BSWDB6
      Hardware UUID:          E7B19EBE-57F9-5EA6-B390-FC1B0ADEFCA9
    OS X 10.6.8

    mellfrommountain brook wrote:
    When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
    There are many possible reasons for that.
    Most likely a corrupted cookie or cache file for that site may be responsible.
    On the Safari menu bar got to Safari -> Empty Cache
    Then go to Safari -> Preferences and click on the 3rd symbol from right.
    Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
    Restart Safari and try again to log in on the site.
    Lupunus

  • Just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:     iMac   Model Identifier:     iMac7,1   Processor Name:     Intel Core 2 Duo   Processor Speed:     2 GHz   Number Of Proces

    just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
    iMac   Model Identifier:
    iMac7,1   Processor Name:
    Intel Core 2 Duo   Processor Speed:
    2 GHz   Number Of Processors:
    1   Total

    Open Console in Utilities & see if there are any clues or repeating messages when this happens.

  • Help, please.  My iMac sound has gone all stat·ick·y The Video won't play correctly or at all.  I have a Model Name:     iMac   Model Identifier:     iMac12,1   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz  I am running OSX 10.6.8

    Help, please.  My iMac sound has gone all stat·ick·y The Video won't play correctly or at all.  I have a Model Name:
    iMac   Model Identifier:
    iMac12,1   Processor Name:
    Intel Core i5   Processor Speed:
    2.7 GHz  I am running OSX 10.6.8

    So just to be clear on a few things:
    Should partitioning the hard drive not work is it undoable?
    Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
    Is there a limited amount of space that makes this process ineffective?
    I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
    Thanks again

  • Hi, can you advise me, which SSD i can instal to my iMac Thanks.       Model Name:          iMac   Model Identifier:          iMac12,2   Processor Name:          Intel Core i5   Processor Speed:          2.7 GHz   Number of Processors:          1   Total

    Hi, can you advise me, which SSD i can instal to my iMac
    Thanks.
      Model Name:          iMac
      Model Identifier:          iMac12,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB

    HI..
    Read here >  Requirements for Mac OS X v10.5
    Your Mac meets the requirements but make sure there's enough free disk space.
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
    edited by:  cs

  • Hi, can you advise me, which SSD i can instal to my iMac Thanks.    Model Name:     iMac   Model Identifier:     iMac12,2   Processor Name:     Intel Core i5   Processor Speed:     2.7 GHz   Number of Processors:     1   Total Number of Cores:     4   L2

    Hi, can you advise me, which SSD i can instal to my iMac
    Thanks.
      Model Name:          iMac
      Model Identifier:          iMac12,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.7 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          4 GB

    Hi HarmitClaire,
    Welcome to the Apple Support Communities!
    I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
    Mac notebooks: All about batteries - Apple Support
    My battery is not charging
    Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
    Best regards,
    Joe

  • I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file  and  all the latest event files, can you help how to solve the problem? Thank you  Model Name iMac    Model Identifier:     iMa

    I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file  and I lost all the latest event files, can you help how to solve the problem? Thank you
    Model Name:     iMac
    Model Identifier:     iMac8,1   Processor Name:     Intel Core 2 Duo
    Processor Speed:     2.4 GHz

    http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

  • Can I upgrade my 2006 iMac4,1 with Intel Core Duo with 1.5GB memory, 667MHz Bus Speed, 2GHz processor from 10.4.11 to the newer OS systems? I've been told my machine is now "vintage" or obsolete...

    Can I upgrade my 2006 iMac 4,1 with Intel Core Duo w/1/5GB memory, 667GHz Bus Speed, 2GHz Processor Speed to the newer OS systems?
    I have been told my machine is now "vintage or obsolete" and can't be upgraded to the newest OS software.

    The maximum OS for that iMac is 10.6.8.
    (64450)

  • How can I go back to a previous boot ROM version?

    Hi. I've been reading these forums for a long time...first time posting.
    The short story: I have a Macbook 5,2 running OS X 10.5 with boot ROM MB52.0088.B06, and I'd like to know how to flash the boot ROM version back to MB52.0088.B05.
    The long story:
    I have a MacBook 5,2. It came with OS X 10.5. As far as I know, the latest boot ROM for 10.5 on a Macbook 5,2 is MB52.0088.B05 (EFI 1.4) (see http://support.apple.com/kb/HT1237).
    A while ago, a friend convinced me to update to 10.6. Apparently, with the 10.6 install, it updated the boot ROM version to MB52.0088.B06. Now, I'm concerned that there is a firmware issue (which I might be wrong about, and the reason I think there is a firmware problem is very convoluted but I'll explain if you want). So I decided I wanted to go back to MB52.0088.B05. I had been thinking about going back to OS X 10.5 anyway. So, I backed up my system using Time Machine to a Time Capsule via ethernet. Then I did an Erase and Install with the original 10.5 install disc that came with my Macbook. Then, I used Migration Assistant to restore most of my system from the backup. I should have taken a look at the boot ROM version before I ran Migration Assistant...but I didnt.
    The boot ROM version still says MB52.0088.B06.
    I tried downloading the MB52.0088.B05 update and running it anyway, and it says my computer doesn't need the update. When I was still running 10.6, I did try the method described here: http://pubmem.wordpress.com/2011/04/09/flash-efi-firmware-update-manually-on-a-m acbook-51/ (which has apparently worked for someone else on a 5,2; see https://discussions.apple.com/thread/3747472?start=0&tstart=0), and it didn't work. I don't know if it's a good idea to try it again now.
    So:
    Why didn't my boot ROM go back to MB52.0088.B05 after a clean 10.5 install?
    Did Migration Assistant import the previous boot ROM somehow?
    Should I do another clean install without MA?
    Should I try PubMem's manual method again?
    Is there another way I can flack back the firmware?
    Thanks a ton!
    P.S. I'm posting this in the Time Capsule community as well, since it might be an MA issue. Don't get mad, I'm new. If that's against the rules, I'll take it down.
    Specs:
    Model Name: MacBook
      Model Identifier: MacBook5,2
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.13 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MB52.0088.B06
      SMC Version (system): 1.38f5
      System Version: Mac OS X 10.5.8 (9L31a)
      Kernel Version: Darwin 9.8.0

    At least you have made some progress. My inkling is the optical drive is dead.
    I think you're right.
    To run the AHT you would need the AHT disc that came with the computer, but it's unlikely you have it for that old iBook G4.
    I do have it, in fact! But it's not working. Here's the situation, copied from a conversation with Kenichi Watanabe over in iMacs...
    I haven't been able to run the Apple Hardware Test. I have the AHT CD that came with the computer (v1.2), and I also downloaded v1.2.6 here and burned that to a CD. In both cases, when I load the CD into the external optical drive which is connected via a firewire cable (exactly what I used for the install disc), restart, and press and hold C, the computer ignores the CD completely and boots from the HD. Any idea how to fix this? Or, is there another function I can use to achieve the same thing, maybe in single user mode?
    Regarding the Apple Hardware Test CD, holding down the C key will attempt to boot from the internal optical drive.  Since there is nothing in there, it boots from the internal hard drive.  I would try starting up with the Option key held down.  That should get you to the Startup Manager screen.  If that CD is in the external FireWire drive, it should be listed as a startup disk choice.  Select it and see if it will start up from it.
    Right, that makes sense. Unfortunately, in both cases, when I select the CD to start up from, the screen blinks for a second and then returns to the screen where I am supposed to choose a startup disc. It does this as many times as I try to choose the CD, until I select the HD and start up from there.
    When I put either CD in the drive, with the computer on and booted from the HD, the CD mounts, and Disk Utility says it's verified. But when I try to select it as a startup disc from system preferences, it doesn't show up. Ideas??
    Update: I tried Hoja's reccommendation from this thread using Open Firmware, but in response to
         boot cd:\diags
    It says:
         can't OPEN: cd:\diags
    for both CDs.

  • Will migration assistant import my previous boot ROM version?

    Hi. I've been reading these forums for a long time...first time posting.
    I have a MacBook 5,2. It came with OS X 10.5. As far as I know, the latest boot ROM for 10.5 on a Macbook 5,2 is MB52.0088.B05 (EFI 1.4) (see http://support.apple.com/kb/HT1237).
    A while ago, a friend convinced me to update to 10.6. Apparently, with the 10.6 install, it updated the boot ROM version to MB52.0088.B06. Now, I'm concerned that there is a firmware issue (which I might be wrong about, and the reason I think there is a firmware problem is very convoluted but I'll explain if you want). So I decided I wanted to go back to MB52.0088.B05. I had been thinking about going back to OS X 10.5 anyway. So, I backed up my system using Time Machine to a Time Capsule via ethernet. Then I did an Erase and Install with the original 10.5 install disc that came with my Macbook. Then, I used Migration Assistant to restore most of my system from the backup. I should have taken a look at the boot ROM version before I ran Migration Assistant...but I didnt.
    The boot ROM version still says MB52.0088.B06.
    I tried downloading the MB52.0088.B05 update and running it anyway, and it says my computer doesn't need the update. When I was still running 10.6, I did try the method described here: http://pubmem.wordpress.com/2011/04/09/flash-efi-firmware-update-manually-on-a-m acbook-51/ (which has apparently worked for someone else on a 5,2; see https://discussions.apple.com/thread/3747472?start=0&tstart=0), and it didn't work. I don't know if it's a good idea to try it again now.
    So:
    Why didn't my boot ROM go back to MB52.0088.B05 after a clean 10.5 install?
    Did Migration Assistant import the previous boot ROM somehow?
    Should I do another clean install without MA?
    Should I try PubMem's manual method again?
    Is there another way I can flack back the firmware?
    Thanks a ton!
    P.S. I posted this in the MacBook community as well. Don't get mad, I'm new. If that's against the rules, I'll take this one down.
    Specs:
    Model Name: MacBook
      Model Identifier: MacBook5,2
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.13 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MB52.0088.B06
      SMC Version (system): 1.38f5
      System Version: Mac OS X 10.5.8 (9L31a)
      Kernel Version: Darwin 9.8.0

    Boot ROMs are firmware. Migration Assistant doesn't transfer firmware. Once you update firmware it can't go back to some previous version on its own. You would need to manually reprogram the ROMs with the old firmware.

  • Upgrade boot rom version 7200

    How do I upgrade the boot rom version on the 7200 router?  I am running IOS Version 12.4(22)T and when I plug in the serial ds3 card in my router it keeps rebooting with a watch dog error ( see below).  Also, what version should I upgrade to?
    Router#sh ver
    Cisco IOS Software, 7200 Software (C7200-SPSERVICESK9-M), Version 12.4(22)T, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Compiled Fri 10-Oct-08 10:10 by prod_rel_team
    ROM: System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)
    BOOTLDR: 7200 Software (C7200-BOOT-M), Version 12.0(13)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
    Router uptime is 0 minutes
    System returned to ROM by power-on
    System image file is "sup-slot0:/c7200-spservicesk9-mz.124-22.T.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco 7206 (NPE400) processor (revision A) with 229376K/32768K bytes of memory.
    Processor board ID 8771332
    R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
    6 slot midplane, Version 1.3
    Last reset from power-on
    PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.
    Current configuration on bus mb0_mb1 has a total of 200 bandwidth points.
    This configuration is within the PCI bus capacity and is supported.
    PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.
    Current configuration on bus mb2 has a total of 0 bandwidth points
    This configuration is within the PCI bus capacity and is supported.
    Please refer to the following document "Cisco 7200 Series Port Adaptor
    Hardware Configuration Guidelines" on Cisco.com <http://www.cisco.com>
    for c7200 bandwidth points oversubscription and usage guidelines.
    1 FastEthernet interface
    125K bytes of NVRAM.
    47040K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
    4096K bytes of Flash internal SIMM (Sector size 256K).
    Configuration register is 0x2102
    Self decompressing the image : ########################################################################################    #######################################################################################################################    ############################################################################# [OK]
    System Bootstrap, Version 12.2(4r)B, RELEASE SOFTWARE (fc1)
    TAC Support: http://www.cisco.com/tac
    Copyright (c) 2002 by cisco Systems, Inc.
    ROM: Rebooted by watchdog hard reset
    C7200 platform with 262144 Kbytes of main memory

    Hi,
    I think you are looking for this procedure?
    http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/12S28FUR.html#wp1073907
    Let me know whether it does address your question.
    Cheers,
    Ivan.

  • BOOT ROM VERSION ISSUES WITH MINI MAC POWERPC G4 (1.2)

    HI,
    I AM HAVING SOME BOOT PROBLEMS ON REBUILDING MY MAC MINI. WHENEVER I PUT IN A BRAND NEW COPY OF EITHER PANTHER OR TIGER THE BOOT SCREEN WITH THE APPLE LOGO CRASHES AND FUNNY GRAPHICS APPEARS, RESULTING IN A FORCED REBOOT AND USING F12 TO EJECT THE CD. THE MAC MINI IS FINE BOOTING OFF OF ITS OWN MANUFACTURE CD, WHICH IS A COPY OF PANTHER, BUT WON'T UPGRADE WITH ANY TIGER DISKS. I HAVE EVEN MANAGED TO CHANGE THE DISKS WITH SOMEBODY ELSE WHO WAS SUCCESSFUL IN UPGRADING TO TIGER.
    I HAVE LOOKED ON THE INTERNET AND OTHER PEOPLE HAVE EXPERIENCED THE SAME PROBLEM. THEY MENTIONED THAT I SHOULD CHANGE/UPDATE MY BOOT ROM VERSION FROM 4.8.9F1 TO 4.9.8F4.
    DOES ANYBODY KNOW WHERE I CAN GET THIS BOOT ROM UPDATE? I HAVE LOOKED ON APPLE DOWNLOADS, BUT NOTHING APPEARS TO HELP. ANY OTHER SUGGESTIONS APPREACIATED.
    MANY THANKS
    SUPERHEROTIMO

    Welcome to the Apple Discussions!
    First, a word of etiquette, writing your post in ALL CAPS is considered the same thing as yelling. Please don't use ALL CAPS when writing your messages.
    Exactly which Mac mini do you have? Is it a G4 Mac mini running at 1.2, 1.3, 1.4 or 1.5GHz? (If it came with Panther install disks, it couldn't be an Intel Mac mini.) Which version of Mac OS X came with your Mac mini? Some of the earlier Mac minis shipped with Mac OS X 10.3.7 and will not startup from any earlier version (most of the retail copies of Panther are 10.3.0 or 10.3.4). If it's a Mac mini that shipped later, it would have come with Mac OS X 10.4.2 and, again, won't startup from any earlier version (most retail copies of Tiger were 10.4.0 but now have 10.4.4). Trying to startup from a disk that's the wrong version will usually cause a "kernel panic" and force you to restart.
    So, if your Mac mini shipped with Mac OS X 10.3.7, you should be able to use any retail copy of Mac OS X 10.4 (Tiger) to update your computer. However, you won't be able to update to 10.4 from the install disk that came with another Mac. You will need to buy a retail copy of your own.
    There are no firmware updates available to download to upgrade the "Boot ROM" on your G4 Mac mini, so that option is really not available.
    -Doug

Maybe you are looking for