Model Name: iMac
Model Name: iMac
Model Identifier: iMac9,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM91.008D.B08
SMC Version (system): 1.45f0
Serial Number (system): W8******0TL
If I have several screens open in the back ground the screens will unvolentaryt twitch back and forth. Then if I have just one screen open at a time it will twitch/throb quickly. Tried rebooting and it will help for a but but eventually come back. Tried reloading software with saving settings not a total shut down/reboot.
<Serial Number Edited by Host>
Bump
Similar Messages
-
just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
iMac Model Identifier:
iMac7,1 Processor Name:
Intel Core 2 Duo Processor Speed:
2 GHz Number Of Processors:
1 TotalOpen Console in Utilities & see if there are any clues or repeating messages when this happens.
-
I have a Mac with software version 10.5.8 My hardware overview: Model Name: iMac Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.8 GHz Number Of Processors: 1 Total Number Of. I is it poss to upgrade to Lion.
Yes. You need to purchase Mac OS X 10.6 on DVD first.
(62528) -
My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times. Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.
-
Help, please. My iMac sound has gone all stat·ick·y The Video won't play correctly or at all. I have a Model Name:
iMac Model Identifier:
iMac12,1 Processor Name:
Intel Core i5 Processor Speed:
2.7 GHz I am running OSX 10.6.8So just to be clear on a few things:
Should partitioning the hard drive not work is it undoable?
Will this have any impact on doing a complete erase and reinstall and will that restore it back from the process?
Is there a limited amount of space that makes this process ineffective?
I have never had to do this sort of thing so I just want to be sure I don;t wind up in the dog house *)
Thanks again -
Hi, can you advise me, which SSD i can instal to my iMac
Thanks.
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GBHI..
Read here > Requirements for Mac OS X v10.5
Your Mac meets the requirements but make sure there's enough free disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
edited by: cs -
Hardware Overview:
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Serial Number (system): W8039BSWDB6
Hardware UUID: E7B19EBE-57F9-5EA6-B390-FC1B0ADEFCA9
OS X 10.6.8mellfrommountain brook wrote:
When I try to log onto a new site the blue line in the text box freezes and the connection does not take place. This happens about 5 minutes after logging on.
There are many possible reasons for that.
Most likely a corrupted cookie or cache file for that site may be responsible.
On the Safari menu bar got to Safari -> Empty Cache
Then go to Safari -> Preferences and click on the 3rd symbol from right.
Click on Details -> type the name of the particular site (e.g. facebook) in the search field and delete all upcoming entry's.
Restart Safari and try again to log in on the site.
Lupunus -
Hi, can you advise me, which SSD i can instal to my iMac
Thanks.
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 2.7 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GBHi HarmitClaire,
Welcome to the Apple Support Communities!
I understand that your MacBook Air is not charging as expected. In this situation there are troubleshooting steps that I would recommend. Please use the attached article as a resource for steps to help you resolve this situation.
Mac notebooks: All about batteries - Apple Support
My battery is not charging
Confirm the correct wattage AC adapter for the computer. A power adapter rated for a lower wattage than is required for the system may not reliably charge the computer. For assistance identifying the proper adapter, review Intel Based Mac notebooks: Identifying the right power adapter and power cord--US. Additional adapter troubleshooting is available in Troubleshooting MagSafe adapters. If issues persist please reset the SMC.
Best regards,
Joe -
I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file and I lost all the latest event files, can you help how to solve the problem? Thank you
Model Name: iMac
Model Identifier: iMac8,1 Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHzhttp://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US
-
Hi my name is Mirko,
i just broth a I Mac today i was wandering if was possible upgade with the Leopard snow
could do you tell me if i can.
ThanksClick here, install the DVD, and run Software Update.
(112067) -
can i upgrade to snow leopard
No.
Older PowerPC Macs with IBM/Motorola CPUs can only go as far as OS X Leopard 10.5.8.
Later versions of OS X, need newer Macs with Intel CPUs to run OS X versions 10.6 and higher.
To run newer versions of OS X, you would need purchase a new or newer (used or refurbished) Intel CPU Mac. -
Mac OS X
Version 10.5.8
Processor 2.66 GHz Intel Core duo
Memory 2 GB 800 Mhz DDR2 SDRAM
Hardware Overview:
Model Name: iMac
Model Identifier: iMac8,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM81.00C1.B00
SMC Version (system): 1.29f1
Serial Number (system): QP90301DZE3
Hardware UUID: 5DEE0F1A-A6C8-5DA8-B42A-7B721EF3B258
After downloading both Lion and Mountain Lion, a popup tells me you can no use this version of the application install OS X Mountain Lion.app with this version of Mac OS X.
What can I do?You downloaded it from where, how? You need Snow Leopard, 10.6.8 (or at least 10.6.7) to purchase the DL from the App Store. Sounds like it might have been a corrupted, pirated and illegal copy, if you got it from 10.5.
Btw, you will need more than the 2GB RAM you have. You need to max that out.
Message was edited by: WZZZ -
I am most unhappy with your Lion 10.7.3 operating system that I installed on this MacBook:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MBP53.00AC.B03
SMC Version (system): 1.49f2
Serial Number (system): W8******7XJ
Hardware UUID: ******
Sudden Motion Sensor:
State: Enabled
1. The scrolling, as far as I've been able to determine, is by using the slide bar to the right of most diplays. There are no up or down arrows that allow slow movement
2. The top and botton toolbars are not visible. The top one appears when you point the arrow to the top of the screen but the same doesn't work well if at all pointing the cursor to the bottom.
3. When downloading, something jumps to the upper right of the screen. I could point and click it and get a diplay if my downloads. I was attempting to fix some of the above. Now the little thing jumps off the screen and I can't get to it.
4I was trying to installMacBook Pro EFI Firmware Update 2.3. I got message it couldn't be installed on my system.
5. The red yellow and blue bullets that allow shutting down, minimizing and maximizing are missing on most open windows.
Can you do something about these problems
It's problematical that one can't communicate directly with Apple to resolve these problems
<Edited By Host>1: I'm scrolling this page right now using the arrow keys.
2: Press the escape (esc) key to exit full-screen mode. Select Apple menu > Dock > Turn Hiding Off.
3: ???
4: That's because you downloaded an update for another model.
5: See 2. -
In FIM datasource creation,model name dropdown menu not getting populated
Hi
When we try to create a new datasource in FIM it asks for a default model name. The default model name drop down menu is not getting populated by the model name. Please suggest what could be the possible solution for the same.
RegardsHello,
There are 3 other things to check if the PCM schema is on a Oracle database :
From FIM server :
1.a. Locate the "ojdbc6.jar" file located in the \jdbc\lib subfolder of your Oracle client installation folder and copy it.
1.b. Paste the copied file in C:\Program Files\Business Objects\Tomcat6\webapps\fim\WEB-INF\lib folder.
Note: This procedure is mandatory for an Oracle repository. Adding the path to the classpath variable is not
sufficient.
2. From the Tomcat Management Console properties, you need to add the path to the location where the tnsnames.ora file is hosted. You add this information on the Java page of the Apache Tomcat Properties dialog box under "Java options", for example, -Doracle.net.tns_admin=C:\oracle\product\10.2.0\client_1\NETWORK\ADMIN
3. From the parameter "Net service name" filed for PCM datastore in FIM, make sure that the name matches exactly (case-sensitive) with the name of the service set into the Tnsnames.ORA file
Hope these additionnal findings would help you.
Thi Anh Antunes -
I have a MackBook A1181 that I bought off Ebay :/ it came with pirate discs and no info....I need to upgrade my Safari so Outlook will work and would like to
get some kind of word/writing tool on it... the info is:
Model Name: MacBook
Model Identifier: MacBook1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MB11.0061.B03
SMC Version: 1.4f12
Serial Number: 4H631CVDU9B
Sudden Motion Sensor:
State: Enabled
Can anybody help?!First correct the pirate disc issue. Buy OS X 10.6 Snow Leopard from Apple for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Snow Leopard is the latest version your macbook 1,1 will run. Oitlook is part of the Microsoft Office suite, if you want outlook you'll need to also purchase Office. If you can get by with Apple's mail program there are free alternatives to Office like Libre Office or Open Office.
Maybe you are looking for
-
Is anyone else having syncing issues with their Apple TV? I am trying to sync movies up that I just bought (StarTrek HD, IronMan HD) and the sync sits there with the progress bar moving all the way to the end but never actually finishes. Just sits th
-
Delay in user creation on target resources
I have user records coming from CSV file | username,id,createdate(mm/dd/yyyy) | jsmith,96732,09/23/2006 |______________________________________________ depending on createdate the user should be created in LDAP on that date at (00:00 hrs) but on AD t
-
Leave workflow error cannot be started.Check entitlements error
Hi, Hope someone helps me. I am using a copy of WS20000081 and when there is an erroneous entry this error gets displayed. Even if I update the erroneous entry when I click the Send button this message still gets saved. I would need to click the Exit
-
[SOLVED]Cannot upgrade pacman because gnupg and gnupg2 are in conflict
I have tried a system update with "pacman -Syu". Pacman says that pacman needs to be upgraded first. I let this happen. Then I get the conflict. Both paths (remove gnupg2 and not remove gnupg2) fail. :: gnupg and gnupg2 are in conflict. Remove gnupg2
-
Stuck on OS X 10.10 after opting out of Beta Updates
This week I opted-out of the Yosemite Beta program and I am no longer able to update my software. The app store shows no updates available and my current version is 10.10. Does anyone know why this is happening? Thanks