[Model Nodes] What prevents Server Parts to be assignedthere ?!:?

Hi,
I want to have a separate node to provide a dedicated service,
and therefore when I start my environment server and declared that
node as ModelNode, with 'client' disabled, i still can't assign to it
my server partition.
And if I declare it as regular node, the installation of the application
failed if the node is not online.
What choice do I have ?
What prevents that ModelNode, client disabled, to host server partition ?!,
j-paul gabrielli
sema dts

Therefore, how to remotely start a node manager ? :-p
j-p
-----Message d'origine-----
De: John Parks [mailto:jparkss1.com]
Date: vendredi 15 septembre 2000 20:07
À: Jean-Paul.Gabriellisema.fr
Cc: 'Forte Users'
Objet: Re: (forte-users) [Model Nodes] What prevents Server Parts to be
assigned there ?!:?
Jean-Paul,
The ModelNode is a client node by definiton, no matter what properties you
change. I've previously asked for an enhancement to allow a
model node to be a
server node, but I don't expect much to happen. To install
server applications
to several nodes, you have to make sure that the node manager on
each node is
active. There really is no built-in support for distributing
applications in
mass to servers like there is for clients (using the model node feature).
Regards,
John Parks
S1 Corporation
Jean-Paul Gabrielli wrote:
Hi,
I want to have a separate node to provide a dedicated service,
and therefore when I start my environment server and declared that
node as ModelNode, with 'client' disabled, i still can't assign to it
my server partition.
And if I declare it as regular node, the installation of the application
failed if the node is not online.
What choice do I have ?
What prevents that ModelNode, client disabled, to host serverpartition ?!,
j-paul gabrielli
sema dts
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe,send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com--
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Similar Messages

The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?

The LCD for my macbook air model number MC965LL/A (purchased 2011) is broken , where can I get new one and what is the part number for it ?

You can find them at vendors like ifixit and instructions to install.
http://www.ifixit.com/Mac-Parts/MacBook-Air-13%22-Mid-2011

Model Nodes? What for?

Hello Everybody,
why is there a distinction between model and value nodes? I never quite crasped the concept.
Usually I prefer the value nodes wherever I can. Often I have to manipulate the data I get from the model and that is really akward with model nodes.
An example for that is when you get Char1-fields instead of real booleans from the backend. My solution is to copy model model nodes to value nodes which is neither elegant nor desirable. But I can add custom attributes or even manipulate the data with calculated attirbutes. Copying nodes is a real pain because the WDCopyService is no help either. Often there's just no way around it though.
So why is there a distinction in the first place?
Best Regards,
Michael

> The only gotcha I experienced myself is that it is
> impossible to map non-model node to model one in
> designer, however it is possible for dynamically
> created context (here there is no notion of "model
> node" at all)
And this is exactly what eliminating the difference between model and value nodes means. The design time approaches the run time and only speaks of nodes.
But the basic difference between value and model nodes remains: Value nodes keep the data themselves whereas model nodes hold references to another object, the "model instance" and take the attribute values from there. Which also means, that they will put changes from the UI there.
Regards, Uwe.

Accessing model node with cardianlity 1 to 1 throwing error

Hello All,
I'm try ing to set values to a model node in the request for a mass update.
in teh model nodes, one of the model node is mandatory with 1:1 cardinality.
i cannot call the currentElement() nor the create and addelement
both throwint the same error as below.
I'm using CE 7.2 engine, and its very critical for me to complete this update.
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'Position' of model class 'uk.co.apps.bertha.wdj.model.wd.models.managets.PositionWrapper' with cardinality 'ONE' maintained
    at com.sap.tc.cm.base.model.BaseGenericModelClass.getRelatedModelObject(BaseGenericModelClass.java:436)
    at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass.getRelatedModelObject(WSTypedModelClass.java:82)
    at com.sap.tc.webdynpro.progmodel.context.DataNode.doSupplyElements(DataNode.java:162)
    at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:106)
    at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:244)
the generated code, i have a list to which i have to bind this node to, there is no code generated as i see it.
i tried regenerating and it doesnt help.
the following is the complete stack
com.sap.tc.cm.base.exception.BaseModelRuntimeException: No object for mandatory target role 'Position' of model class 'uk.co.apps.bertha.wdj.model.wd.models.managets.PositionWrapper' with cardinality 'ONE' maintained
at com.sap.tc.cm.base.model.BaseGenericModelClass.getRelatedModelObject(BaseGenericModelClass.java:436)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass.getRelatedModelObject(WSTypedModelClass.java:82)
at com.sap.tc.webdynpro.progmodel.context.DataNode.doSupplyElements(DataNode.java:162)
at com.sap.tc.webdynpro.progmodel.context.DataNode.supplyElements(DataNode.java:106)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementListAsObject(Node.java:244)
at com.sap.tc.webdynpro.progmodel.context.Node.getElements(Node.java:251)
at com.sap.tc.webdynpro.progmodel.context.Node.getElementAtInternal(Node.java:390)
at com.sap.tc.webdynpro.progmodel.context.Node.getCurrentElementInternal(Node.java:689)
at com.sap.tc.webdynpro.progmodel.context.Node.getCurrentElement(Node.java:696)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.wdp.IPublicTeamStructComp$IPositionUpdateNode.currentPositionUpdateElement(IPublicTeamStructComp.java:10729)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.TeamStructComp.saveMyChildren(TeamStructComp.java:920)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.TeamStructComp.saveNewChangedTeam(TeamStructComp.java:882)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.wdp.InternalTeamStructComp.saveNewChangedTeam(InternalTeamStructComp.java:925)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.TeamStructEditView.onActionSubmitSuccess(TeamStructEditView.java:481)
at uk.co.apps.bertha.wdj.ui.ts.wd.comp.tscomp.wdp.InternalTeamStructEditView.wdInvokeEventHandler(InternalTeamStructEditView.java:523)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:159)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:94)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseLoop(WindowPhaseModel.java:101)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:547)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.handleWindowHierarchyChanges(AbstractClient.java:108)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:56)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1652)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1466)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:884)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:856)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:343)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:315)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:76)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:400)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:203)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:438)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:427)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:80)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:268)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:54)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:264)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:315)

Thanks for reply,
but i can't understand what is myModel indicates in the below code?
Request_EmployeeManagementLocal_updateEmployee reqMod =
      new Request_EmployeeManagementLocal_updateEmployee(myModel);
//Check empl model class will be there , create an object for that
      Employee objEmpl=new Employee(myModel);
regards,
Pradeep Kumar

Preventing Server Timeout on a Socket

I have been questioning my solution to preventing server timeout and was wondering if anyone knows of a better way to do it. I am using a socket to connect to a ftp server which times out the connection after 3 minutes of inactivity. I have tried using the setKeepAlive(true) method for the Socket, but it does not prevent the server from timing me out after 3 minutes of inactivity. I have no idea why it doesn't or what keep alive even means now. My solution was to create a special Thread once the connection is made and have it send a blank command every minute until the Socket is no longer connected to the server. This works fine, but it seems like a workaround rather then a graceful solution. Does anyone have any ideas or input on this? Thank you.

I think that is a good idea. But just one more
question... What does the Socket method
setKeepAlive(true) do (and saying that, "it turns
keep alive on" is not a valid answer... Sun)?There are number of problems with setKeepAlive.
The basic idea is this. It is not so much keeping the socket connection alive as detecting whether it is dead.
But the problems with this are that it is basically a hack. It's not part of TCP and basically as far as I understand sends fake packets to the other side to fool the otherside into retransmitting the last packet.
But it may not work because as stated it's not an official part of TCP and I think the message may well be viewed from the other side as erroneous junk because your side already acknowleged the reciept of the original packet so a request for retransmission would appear to be a request that was old and got hung up somewhere.
Sometimes it works but not very much so.

Unable to set Data in MODEL NODE ??????

Hello All,
I have created a Web Dynpro application which makes RFC or BAPI calls.
I need to <b>pass data to the BAPI as input parameter, but am failing to do so.</b>
The Context structure for the model node is as follow -
Level1 - Z_Mm_XXX_Input
Level2 - Output_Repo
Level3 - T_Plants_Selected_Repo of structure type "Werks"
and supplying function "T_Plants_Selected"
This contains the model attribute as Werks.
Now i need to send this Werks attribute and pass it to the BAPI
I have written the following piece of code -
Z_Mm_XXX_Input zbapi_ip =
               new Z_Mm_XXX_Input();
com.xxx.Werks plants_sel = new com.xxx.Werks();
plants_sel.setWerks("4522");
zbapi_ip.addT_Plants_Selected(plants_sel);
wdContext.nodeZ_Mm_Cmet_Report_Contrctr_Cse4_Input().bind(zbapi_ip);
The attributes for the model node Z_MM_XXX_input node is -.
cardinality - 0..1
selection - 0..1
singleton - true
The attributes for the model node Output_Repo node is -
cardinality - 0..1
selection - 0..1
singleton - true
The attributes for the model node T_Plants_Selected_Repo node is -
cardinality - 0..n
selection - 0..1
singleton - true
Still am not able to pass data to the model node.
Am really confused what could be the probable mistake.
Please let me know what have i missed out.
Thanks in advance,
Samta

hi,
i've the same problem,
i can't set my input data to the BAPI.
i've you the solution ?
thanks
PS here is a part of my code
public void executeBapi_Wd_Tut_Listuser_R3_Input( )
    //@@begin executeBapi_Wd_Tut_Listuser_R3_Input()
          try {
               Bapi_Wd_Tut_Listuser_R3_Input input =
                    new Bapi_Wd_Tut_Listuser_R3_Input();
               Zuname nom_start = new Zuname();
               Zuname nom_end = new Zuname();
               nom_start.setUname("P*"); //hard coded for the moment...
               nom_end.setUname("Q*");
               input.setUname(nom_start);
               input.setUname_End(nom_end);
               wdContext.nodeBapi_Wd_Tut_Listuser_R3_Input().bind(input);
               wdContext
                    .currentBapi_Wd_Tut_Listuser_R3_InputElement()
                    .modelObject()
                    .execute();
               // Synchronise the data in the context with the data in the model
               wdContext.nodeOutput().invalidate();

Need help to read model node input field attribute present in view - first time developer.

Hello Experts,
I am new to CRM Web UI development.
Presently, I am trying to develop a Guided Activity Page having 2 views.
First view has the field Business Partner Number, I have added model Node BuilHeader and the attribute BP_NUMBER while creation of the view.
The Second View consists of 2 fields from the Model Node BuilHeader, namely First Name and Last Name.
The requirement is to enter the BP Number on the first screen then click on the NEXT button from the Guided Activity buttons, on navigating to the Second View, the Names should auto-populate.
I have Created both views and the GP page, the GP navigation is also happening. Initially the fields were showing Not Bound text in value, so I commented the line in GET_I and GET methods to enable the field and remove the Not Bound text. I have created a custom controller with BuilHeader
I have tried doing this but facing the below problems :
1) When I enter the BP number on the first view and press Enter, the value disappears. How to solve this ?
2) Does clicking on the NEXT button on the GP Navigation trigger a Server Roundtrip ?
3) How to read the context node value of BP Number entered on the first view and populate the Name fields on the second view.
Please help.........

you can take reference from from below code as in above case we use BuilHeaderAdvancedSearch search object, to get current entity.
data: query TYPE REF TO cl_crm_bol_dquery_service,.
query ?= me->typed_context->BuilHeaderAdvancedSearch->collection_wrapper->get_current( ).
Do not remove code from getter setter of fields , it will not clear.
Check with http://scn.sap.com/thread/3391203 , for basic understanding of UI.
Regards,
Harish Kumar

Difference among Model node creation, model attribute creation and the field creation in database through AET?

Hello Friends,
To display the field on the View, we can create the field via 3 ways:
1) By creating the model attribute
2) By creating the model node using the GENIL object and using its attributes in view
3) Creating the field in Database structure using AET
But, i am not aware that in exactly what kind of business scenarios we use the above 3 methods to create the field.
Could you help me out to clarify the same.

Hi Dev,
1). By creating the model attribute: we will use this option in case of the field is avaibla in stanadrd sap system. It might be in another under child context nodes and we will use BOL relations to access the attribute.
2). By creating the model node using the GENIL object and using its attributes in view: We will use this option incase of there is no standard provision to use. Means you want to create any custom assignment block with custom attributes then you can go for this option. More over we can use AET to create custom genil object. We have an option Create Table in AET.
3).Creating the field in Database structure using AET: We will use this option incase of there is no attribute in database relevant to your requirement then we will go for AET enhancement.
Hope this might give you little clarification..
Best Regards,
Dharmakasi.

Problem in mapping model node with cardinality

Hi,
I have a requirement where the RFC which is being called has cradinality 0..n.
I imported the RFC model in a different DC and then added the model to public part.
Then, I used that model in the second dc.
Now, I did context mapping with the component controlller by dragging the model context to the
component controller. The view is also mapped with the component controller.
The RFC has input field BUS_PART_NO which is a 12 character input field.
I passed String in it.
There is no error while I build the DC. But while I run the application, the input field is coming Read Only.
I can't changed the component controller to 1..n or 1...1.
I think I need to create a context node and attribute in the view or component controller and then programmatically add this
to the model node.
Please send some SDN links and urls.
Regards
Neha Singh

Hi Neha,
Please create the custom context node/attribute same structure as RFC model node. then populate the data using below following code :
- get the size of the RFC model node which you want to populate in the costom node like
int xxx = wdContext.node<XXX node>().size;
- Create onject for custom node like
I<Custyom Name>Element element = null;
- then use for loop for fetching data from Model node and populate in custom node
for(int i =0; i<xxx; i++)
         element = wdContext.create<Custyom Name>();
         element.set<Attribute Name>(wdContext.node<XXX>().get<XXX>ElementAt(i).get<>Attribute name for model())
         wdContext.<Custyom Name>().addElement(element);
It will populate in your custom node from model node.
Hope it will helps you.
Regards
Arun

What is the part number of MB of Satellite A300-1L0 PSAGCE

Hi
I've got Toshiba A300-1L0 Model NO.PSAGCE-03100UGR.
But there is a problem with graphic adapter ATI 3450 (M82 chipset). After installing proper drivers I got blue screen when Windows starts - and it is written that file ati2....dll gives the problem. The same situation happens both on Windows XP and VISTA.
What is the part number of mentioned notebook mainboard? I'm planning of selling every part of this notebook that is why I would like to know the part number.

Hi
Not sure exactly if the part number is the same but the PT10G_6050A2171501_MB_A03 motherboard is compatible with Satellite A300-1QD, A300-1GC and A300-1L0
But I dont know why the part number is so important you can describe the motherboard as a mobo for Satellite A300 PSAGCE series.
There are different Satellite A300-xxx which belongs to the PSAGCE family and this motherboard would be compatible with all these notebooks

What is the part number for License 8.6

I have call manager 8.6 and I need to add new license , can anybody tell me what is the part number?
dose it depend on the ip phone model ?

If you are a partner you can refer to the ordering guide:
http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/uc_og-ucl_cucm_mcs_cer_CUxAC_cime_sme-edcs840769.pdf
CUCM licenses are user based, so which license are you looking at CUWL, UCL?
This should help:
http://www.cisco.com/c/en/us/products/unified-communications/unified-communications-licensing/index.html

Unable to add value to model node with cardinality 0..n

Hi All,
Im working with Webdynpro Java.i have an issue here.i have a input field item named customer and a drop down box item location.when i give customer and location as inputs,a WSDL (named Equipment WSDL) is called.the result is a drop down list containing equipments id
i took a custom node location with cardinaliy 0..n.i gave static values as input for location.i need to set the location values to model node location.when i m giving a single value to custom node location,that static value is not accepted by model node location(in WSDL) whose cardinality is 0..n.
Please suugest a solution for this issue
With Regards,
Ushasri.

HI Ushashri,
What do you mean by 'static value is not accepted by model node location'
how you have done the mapping
send me the hierarchy of rfc and ur value node
With Regards
Naidu

How to set value to Model Node of cardinality 0..N

hi
I am looking for a way to set value to a model node of cardinality 0..N
i imported a WSDL into my applicaion , which has the following Node Structure.
Context
--- ModelNode_Request
      ---ModelNode2_Input
      ---ModleNode3_Roles [ cardinality 0..n singleton 1..1]
           ****Model_Attribute RoleID     <<<<<<<<<<<<
           ****Model_Attribute SysID      <<<<<<<<<<<<
---ModelNode_Response
i tried with the below code but effort went in vain.
i tried following ways to set the value but , i get Nullpointer expection error.
     wdContext.nodeRequest__SubmitRequest().nodeRequestDetails().nodeRoles().
          currentRolesElement().setRoleId("BASIC");
     wdContext.nodeRequest__SubmitRequest().nodeRequestDetails().nodeRoles().
          currentRolesElement().setSysId("R3_220");
i aslo looked into the forum https://www.sdn.sap.com/irj/scn/thread?messageID=2035342 but couldnt find any solid solution.
It would be great if some one can throw some snippets on the same.
Thanks
Edited by: RR on Dec 22, 2008 5:48 PM

Hi RR,
As far as i know u can set model nodes and values nodes are different. whats shown in the link is for values node. u should do differently for model node..
    Since this is a model node...u first need to create an object of the node type. then create an arraylist for that and then add values..
try this..
// Create an object for structures in the node to be used
Yweb_Po_Items objPOItems = null; // where Yweb_Po_Items is the structure of the node...
// Create an abstractlist for structures in the RFC node to be used, if u are planning to give single or multiple rows (in node/table) as input to the RFC
AbstractList POObjAbsList = new Yweb_Po_Items.Yweb_Po_Items_List();
objPOItems = new Yweb_Po_Items();
//    /set first set of values
objPOItems.setColumn1(u201Cabcu201D); // here hard codede for example
objPOItems.setColumn2(u201Cabcfghu201D);
// add the object to the abstract list
POObjAbsList.add(objPOItems);
//    /set second set of values
objPOItems.setColumn1(u201Cnewabcu201D);
objPOItems.setColumn2(u201Cnewabcfghu201D);
// add the object to the abstract list again
POObjAbsList.add(objPOItems); // now u got 2 records
// now set the abstractlist to the node in the RFC
objGoodsReceiptPO.setPo_Items_In(POObjAbsList);
Hope this information is useful...
Thanks
Md. Yusuf

Setting max length of the field when using Context Model Node

I have created a model using Import Adaptive Web Service model option (a web service was a wrapper around SAP BAPI function module).
There were no dictionary types created in the Local dictionary as a result of import.
I have mapped the context of the controller to the model node.
One of the fields in the model is name CUSTOMER_NUMBER type string;
Corresponding element in the wsdl of the web service is
<xsd:element name="CUSTOMER_NUMBER" type="tns:char10" />
I have created a view with the input filed mapped to the CUSTOMER_NUMBER field of the model node.
When I type more than 10 chars into the field and hit the search button, I get a com.sap.dictionary.runtime.Ddcheck exception that the length of the field should be less than 10 chars.
How can I set the max length of the field in design time to prevent runtime exception?
Thanks,
Julia

Thank you for your reply.
Java trim function will trim the white spaces only, not the characters.
I can code check length functionality before calling execute function (the function that call the web service).
I can also create a dictionary structure based on the model structure; create a context value node based on the dictionary structure and use WDCopyService API to move the data between value node and model node.
I was looking for the best practice...
When importing model based on Adaptive RFC, the dictionary structures are imported together with the model. This does not happen for Adaptive web service - hence there is a need to add coding for simple checks.
Julia

Does xcelsius access data model in MS sql server 2000

have the following scenario: I need to create a dashboard which will be accessed through a Microsoft Office SharePoint server portal. This dashboard will be used for analysis of Agencies and Underwriters; they should be able to drill down to policy level details.
The data will originate from a Data Warehouse (Relational Schema) which resides on a Microsoft SQL server 2000 platform.
Q) Does Xcelsius work off a relational model or does the data model need to be converted to a Dimensional Star schema? Do you have to create Cubes?
A)
Q) It was mentioned in the book that Xcelsius can connect to a Microsoft SharePoint server using web part, however there is no information in the help menu to do that task?
A)
My thought) I was also thinking that the data model build on MS SQL SERVER 2000 can be used to create a Universe, which then can link to Live Office using Query as a Web Service (QAAWS) and used to build Xcelsius model. (Does one have to go this route, or can one access the data model created on SQL SERVER 2000?)
Any Feedback)

I need to create a dashboard which will be accessed through a Microsoft Office SharePoint server portal. This dashboard will be used for analysis of Agencies and Underwriters; they should be able to drill down to policy level details.
The data will originate from a Data Warehouse (Relational Schema) which resides on a Microsoft SQL server 2000 platform.
Q) Does Xcelsius work off a relational model or does the data model need to be converted to a Dimensional Star schema? Do you have to create Cubes?
A) Xcelsius works on an X/Y (Column/Row) table model, strictly based on the Excel structure. Though the underlying data model is a table, it is not inherently relational as it does not impose any BC Normal Form requirements.
Xcelsius works primarily with data embedded in an integrated Excel workbook. Data can be input to the workbook by a variety of methods, from importing a premade Excel workbook into the the model to retrieving data from flat files (.txt, .xml, .etc) to getting data from a connection such as a WebService.
There is no capability to connect directly, 1:1, to a database source and execute SQL queries. An intermediary is required to retrieve data from a database, such as a WebService or an XML Data connection.

[Model Nodes] What prevents Server Parts to be assignedthere ?!:?

Similar Messages

Maybe you are looking for