Model number required for website not clear

Hi,
My laptop model number is Portege R830. Part number PT321U-0H9019. What model do I select on your downloads webpage: "http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp"
Where do I find the appropriate model number? Ulitimatley I just want a manual that can detail a part number for the ZIF to SATA adaptor required to adapt a a replacement SSD
Thanks
Nick

Portege R830 (PT321U-0H9019)
Similar to this one, Nick.
Portege R830-S8332 (PT321U-0FW04Q)
Because they are in the same part-number family (PT321U), the downloads here should work.
Sometimes Toshiba does not assign a model designation. We often notice that when it's a special order from ToshibaDirect.
I can't help you with the ZIF to SATA adapter problem.
-Jerry

Similar Messages

My headphone model number "MDR-XB30EX" is not working properly can it be repair?

My headphone model number "MDR-XB30EX" is not working properly can it be repair? One of its head jack is not working, no sound at al.

Hi kashiffriends10,
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

Kernel requirements for HPLIP (not working) [SOLVED]

My printer (connected to the network through my router with a static ip address) used to work fine with HPLIP and CUPS. When I last tested, I was (and am) using a custom-compiled zen kernel; the relevant modules that I compiled (separately, not into the kernel) are plip, ppdev, and parport. I am guessing that it is a combination of package upgrades and my custom kernel that is causing the problem below:
My printer is detected by CUPS, and I can see it on localhost:631. When I send jobs to it, it begins "processing" them, then hangs on a (to-print) page and I see the message
/usr/lib/cups/backend/hp failed
I deleted the printer from CUPS and re-added using
sudo hp-setup
The process goes just fine, with hp-setup only throwing a warning about how dbus must be running for the PC to fax (with which I am not concerned).
When I run hp-testpage, I get this:
redscare:~> hp-testpage
warning: python-dbus not installed.
HP Linux Imaging and Printing System (ver. 3.9.12)
Testpage Print Utility ver. 6.0
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using printer: Officejet_6500_E709n
warning: Qt/PyQt 4 initialization failed.
error: hp-testpage -u/--gui requires Qt4 GUI support. Entering interactive mode.
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n <-- This line is important?
error: Unable to print to printer. Please check device and try again.
note: If an error occured, or the test page failed to print, refer to the HPLIP website
note: at: http://hplip.sourceforge.net for troubleshooting and support.
Thanks in advance for your help
Last edited by RedScare (2010-01-08 01:27:28)

I didn't have python-dbus installed, which I did. hp-check -t still throws some errors, but I don't see how they are related to the printer not working (more scanning-related issues). Here's the new output of hp-check -t:
Initializing. Please wait... \
| SYSTEM INFO |
Basic system information:
Linux redscare 2.6.32-ZEN #1 ZEN SMP PREEMPT Tue Jan 5 20:30:35 EST 2010 x86_64 Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz GenuineIntel GNU/Linux
Distribution:
unknown 0.0
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
error: NOT FOUND OR FAILED TO LOAD!
Checking for CUPS... Status: scheduler is running Version: 1.4.2
error_log is set to level: warn
Checking for dbus/python-dbus... dbus daemon is running.
python-dbus version: 0.83.0
| COMPILE AND RUNTIME DEPENDENCIES |
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: SANE - Scanning library...
error: NOT FOUND! This is a REQUIRED/RUNTIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
| HPLIP INSTALLATION |
Currently installed HPLIP version...
HPLIP 3.9.12 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.12
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.9.12
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.12.29
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = BlackPrinter
device_uri = hp:/net/Officejet_6500_E709n?zc=PRINTER
[installation]
version = 3.9.8.36
date_time = 10/15/09 23:29:55
| DISCOVERED USB DEVICES |
No devices found.
| INSTALLED CUPS PRINTER QUEUES |
BlackPrinter
Type: Printer
Device URI: hp:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinter.ppd
PPD Description: HP Officejet 6500 e709n, hpcups 3.9.12 Printer status: printer BlackPrinter is idle. enabled since Wed 06 Jan 2010 04:26:39 PM EST
error: Unable to communicate with device (code=12): hp:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
BlackPrinterFax
Type: Fax
Device URI: hpfax:/net/Officejet_6500_E709n?zc=PRINTER
PPD: /etc/cups/ppd/BlackPrinterFax.ppd
PPD Description: HP Fax hpcups Printer status: printer BlackPrinterFax is idle. enabled since Wed 06 Jan 2010 04:26:57 PM EST
error: Unable to communicate with device (code=12): hpfax:/net/Officejet_6500_E709n?zc=PRINTER
error: unable to open channel
error: Communication status: Failed
| SANE CONFIGURATION |
'hpaio' in '/etc/sane.d/dll.conf'...
error: '/etc/sane.d/dll.conf' not found. Is SANE installed?
| PYTHON EXTENSIONS |
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the proper installation of scanext.
|
| USER GROUPS |
root bin daemon sys adm disk wheel log
| SUMMARY |
error: 13 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.

How to create requirement for BOM, not for its components?

Dear gurus,
I have never worked in PS module before. Now I have the following task:
There is Project, Network and WBS. I inserted material for operation in WBS and exploded the material.
Now the system must create requirement for this material but NOT for components of BOM. How can I configure the system?
P.S. We don't use MRP and we can't change Material Master Data.
Edited by: Azat Fayzullin on Dec 8, 2009 12:44 PM

Have you read SAP help on PS
also check this forum for similar posts
If you have never worked on PS module I am not sure if you will be able to configure the system
please attend some courses in PS from your local SAP academy course names are PLM200, PLM210, PLM220, PLM230, PLM240
for your specific requirements I would recommend PLM200 and PLM220

Apple Works Install Issue;"Default location required for install not found"

I am a new mac user. Just bought a Mac Air. Trying to install Apple Works 6.2.9. I downloaded, but when I try to install, I get a message "The default location required for this install could not be found. This install will be cancelled." Any ideas? Thanks!

The download isn't the complete application, it's an updater intended to be applied to an installed earlier version. AppleWorks is no longer sold by Apple but may be available on eBay or other retails. It has been 'end-of-lifed' and there is no support for it, however it works well on current Macs.
However given the situation you are probably better off getting something modern, such as iWork.

Number pad for dialing not working

I just received a replacement Tour 9630. When I activated phone and set up BES it somehow deactivated my number keys for dialing a phone number. Now unless I place a call from my Contacts list I can't dial a number. Thoughts?

There are a couple of ways you can set up the device. You can have it "dial from home screen" where you just hit keys and it begins to dial. Or you can launch applications by hitting a shortcut key ("b" for browser, "n" for BBM, etc.) If it is set to launch shortcuts then you can simply hit the green phone button and then dial your number. It just depends on what the option is set to. How to set the option depends on the OS version on your device. Do you know if it's running OS 5 or OS 6?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

How can I know if its Model number is A1425 or not?

I bought a new rMBP 13" 2 weeks back. I would like to know its model number something like this A1425. I am new to the Mac World and appreciate help.
Thanks,
Swaroop AJ

http://support.apple.com/kb/HT4132 How to identify MacBook Pro models
You can also call Apple tech support since you are still under warranty.

MSIE6 required for website; Safari3 not working

I am unable to properly access my bank's website using Safari 3 as they only support MS IE6.0 . I tried using Tinkertool to emulate IE6 and it still didn't work. When I click on GO and another screen is supposed to pop up nothing happens. Allowoing popup windows didn't correct this. I don't have a dual processor so Parallel or Bootcamp aren't options.
I've also tried Firefox & Netscape and they're even worse for this situation.
Anyone have a suggestion or successful experience with this?

The navbar is JavaScript generated so the pc needs js to have the nabber visible. It may just show a black square where it should appear.
OT

Approval procedure required for Delivery note based on condtions

Dear All,
I have the followings situation in which the business flow is as such that Sales Quotation is made and based on the Sales Quotation AR Down Payment request is made. Once the downpayment is recieved from the customer entries are made in Incoming Payment, Sales Order is booked and AR downpayment Invoice is booked. As there are milestone payment means 30 %, 60 % which would be done through AR downpayment Invoice and final 10 % is the final AR Invoice done. Now lets say that I have a Sales quotation No 10001 having an value of USD 10000 based on which AR Downpayment Request for 30 % and incoming payment comes from the customer for 30 % which is 30 % of USD 10000 is USD 3000. After reciept of payment based on Sales Quotation No 10001 a Sales Order is been booked ( Document Number 20001 ) with a payment terms of 30 days credit. Now I want an approval procedure in the Delivery Note to do a check that if for that particular Order No the payment terms is for 30 days credit means the payment due date and if the next 60 % the customer does not pay in time (which is after 30 days) the delivery would require an approval from the Finance head.
I think the above situation can be solved from the approval procedure with the help of some query but am not able to understand as to how to work on it.
Would be obliged if you can throw some light in it.
Regards,
Rahul

Dear Gordon,
I think you did not understood my requirement. See the first 30 % downpayment the customer would be giving at the time of Sales Quotation. Now ater 30 % is recieved sales order would be booked. Now based on the sales Order delivery would be ONLY done when the next 60 % the customer pays. If he does not pays the next 60 % I want an approval to be done for delivery.
I had mentioned in my earier thread - ''next 60 % the customer does not pay in time (which is after 30 days) the delivery would require an approval from the Finance head.''
Means I want an approval check to be done on delivery with a condition of 60 % of the order value. And the final AR invoice would be done on the last 10 %.
I hope I am clear in my requirement.
Regards,
Rahul

PETITION: Valid product serial number required for forum registrati

female54 wrote:
6 months in this thing randomly just gets a hardware problem, and i hadn't used it for a while, so its not like I dropped it. Just randomly this thing says it doesn't feel like working. I lost my recipt in a move, so now all is lost. I don't want to pay for a repair, when I can just buy something else that won't die like Creative's stupid stuff does. The worst part is that you guys make it so darn difficult to get it fixed. You guys owe me an Ipod. I'd rather not have the hassel of e-mailing you guys and all that jazz, paying for it to be sent, and then paying for the repair. So silly, this place is not customer geared at all. I wish I knew this before I spent my hard earned money on the player. Oh and Itunes is a way better program aswell.
I don't know about the rest of you, but I've really had enough of this. Those shiny white elitist iSheep 'i use a mac so i'm better than you and my poo doesn't stink' fanboys come and post in the forums, wasting our time (and bandwidth). We think someone needs help, only to read through the trog's post and see thier "iPods rule, all else drool," motto.
So I propose this: Anyone who wants to register for the fourms would require a legitimate (and the algorithm knows if it's legit) serial number for their product. This would do two things: one, keep people from registering 4.352x0^3 names and flaming or inciting riots. Second, the product would be on file (and would help other users in determining possible options for support/repair, i.e. open it up and replace the HDD, or send it in).
If you want to bash creative, fine. Be prepared to back up your claim. If you want to be a fanboy, do it on your blog and not where people are truly seeking help.

No way. I don't have a creative player, but I'm looking to buy one. Would this mean that I can't ask questions about the player on this board, or help others who are also intrested in the same player as me? This board is a great source of information, much better than the actual information on the Creative site.
People are angry with their products because they have a reason to be. I admit that some angry customers are just using the forum to let off their anger, but you should have to put up with that. If you look at it from a positi've view, it shows us that that particular player may have problems. If you don't like the look of posts like that, then just ignore them.

Modelling Info Required for ABAP Work bench

Dear All,
   We need your help in the below issue. Please try to provide your valuable inputs for the same.
   We are trying to develop a solution in the R/3 system which tries to compare different table/fields and checks the consistency of the data in these tables.
E.G: Say we have 2 tables like BUT020 and ADRC, now we would need a modelling tool which sort of maps the primary keys of these tables in the front end and checks whether the data in this table is correct.
    So we would need to write some generic code at the back end which picks these tables/field details at run time and checks the data for inconsistencies. Now at the back end we are comfortable in writing this Generic code in ABAP.
   But we need help in the front end where we can have a modelling tool which say would have a pre-defined set of tables and which would allow us to map these fields in the UI and pass the data to the back end.
    Do you know which modelling tool or a UI which we could use for this purpose. We tried checking with Visual Composer for the UI, but I heard this integrates only with the ESA Repository and we should BO's modelled for the same. So this option was not feasible.
    Please let us know in case you know any tool which can use in the front end to map the tables.
Any suggestion will be highly rewarded.
Warm Regards, Vinay

Hello Sandeep
The reason why it's no longer available is because it's not recommended to install Dual Stack.
The recommendation is to install seperate SAP systems (one SID for ABAP, another SID for Java, a database for each of them).
There are several reasons for that recommendation, refreshing procedure, system copy procedure, setting database parameters seperately for each and so on.
So you would have something like AA1 + Database and AA2 + Database and you connect them using the post configuration steps (template runs etc).
Most or all of the future SAP products will be focused on one engine (either fully ABAP or fully Java).
Kind regards
Tom

Serial number required for photoshop subscription??

Hi,
I got a photoshop subscription, all worked well on my ancient computer, then it died.
I bought a new one and installed through creative cloud and my adobe account my photoshop CS6, but now it requires a serial number!
My trial version expired and I can't use my product any more.
I tried to uninstall photoshop and to download it again from my adobe account : trial version expired again!
No one is helping solving my problem and it's been more than three weeks now that I can't work... what can I do and where can I found
that DAMN serial number!
ps : logging with my adobe ID and password when it requires the serial number doesn't work : still wants it and I don't have it! :/
Thank you for your help...
Nefer

Hi!
Can we try to uninstal the Adobe Application manager and then try to reactivate the applcation using Adobe id and Password..
Ideally Subscriptions should never require a serial number.
First uninstall the Adobe Application manager from your computer.
and then redownload the Adobe Application manager from the follwing links
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773- For Windows
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773- For Mac
Once done then try to Reactivate your product.
Hope It Helps
Thanks

Using DVD@ccess for .PDF (not clear to me in Manual)

So I've got a link typed into a certain page of the DVD to link to a .pdf file. The link is typed as:
file:///DVDname/foldername/file.pdf
This is how it tells me to link it in the Manual, however whenever I burn a test disc, put it in the computer, check the "enable DVD@ccess" box in the DVD Player prefs, and test it, it does not open the file. How is this not working? Do I have to place the folder in a specific location when the DVD begins to build and format, or do I have to include the full line of folder names (folders within folders) when I type in the address above? Am I selecting the wrong folder when I choose the "content" folder before building the DVD?

Good links from Drew...
The process is complicated. I'll try to make it simple.
First off, your pdf file needs to be in a folder somewhere on your machine - let's call it EXTRAS. That folder itself now needs to be in a parent folder as well, let's call that one ROM_CONTENT. For simplicity just set this up on your desktop for now.
From within DVDSP you need to set the location of the pdf file in the property inspector, but you do this in two places. First off, click on the disc icon in the outline view and then look in the property inspector for the ROM section. Use the 'Browse' facility to specify the outer folder you made earlier, and make sure the path in the property inspector points to the location of 'ROM_CONTENT'.
Now, in the menu that is going to hold the DVD@ccess link you also specify the path to the file, but this time you set up the path as it would appear after the disc is built. If your pdf file is called 'products' and your DVD itself is called 'My_Disc' then the URL that you put in the menu needs to be:
file:///My_Disc/EXTRAS/products.pdf
Note that you *do not* use the name of the parent folder... this is very important!
When DVDSP builds the disc it will place the Video_TS and Audio_TS folders at the root level (the first thing you see if you open the disc in your finder). When you use DVD@ccess it will also put a folder to hold the @ccess.exe file with instructions to PC users, and it will also put whatever it finds inside the ROM_CONTENT folder at the root level of the disc. In the example here it finds a folder called EXTRAS and so the root of your disc looks nice and tidy - four folders. If you didn't use the inner folder then your pdf would appear as a file on the root... which to me is plain messy.
Now, since the folder called EXTRAS is now at the root level and holding the file to launch, that's what you MUST specify when writing the menu URL.
Finally, in order to see this working on your Mac (simulator) you need to turn on the DVD@ccess prefs in both DVDSP and DVD Player. Once done, the file should launch your default pdf viewer (probably 'Preview'). If it doesn't then there is either something wrong with the paths you have used inside DVDSP, or there is something wrong with your Mac! I'd suspect the paths before anything else...

Css background files for website not appearing on safari

My website's background shows up on Internet Explorer, but it is white on Safari. bestpianobar.com
Here is the css data:
<STYLE TYPE=text/css>
<!--
body {background: url(newimages/bkgrd.gif); background-attachment: fixed}
Any suggestions?

Hi,
It doesn't work in Firefox either. It looks like your CSS file is declared incorrectly. In the ran.css file you have the <style> tags - those shouldn't be in there, just the CSS selectors should be.
PS. If the site is meant for general public consumption you might want to offer an option to mute the music

Model number required for website not clear

Similar Messages

Maybe you are looking for