Model sb0400 not sta

Ok First i apologize for my earlier rant.
now i have tried several differnt things, and all that seems to work well is if i dont do anything else with my computer but play music. not really acceptable. it appears from reading this board that there is no one single fix for these things.
here is what happens, reinstalled in a new slot, on a different irq, the only thing this got me was another hole in my case for dust and dirt to get into, it did not stop the freeze problems that i am having if i try to do more than one thing. the sound dies and i get several clicks and then i might as well have a doostop instead of a puter.
Drivers .88.25 and .84.50 neither seem to solve this problem. not much else listed for xp sp2
my system meets the minium requirments
xp sp2
52 ram
amd xp2000 @ .67gig (not overclocked)
ati 9200/28
soyo dragon plus mobo
lots of hd space avail
any suggestions would be appreciated
markMessage Edited by SilentUnicorn on -26-2004 07:25 PM

Have you tried cleansweeping your drivers and reinstall them?
http://us.creative.com/support/kb/article.asp?l=2&sid=72

Similar Messages

  • Azure - The name 'model' does not exist in the current context

    I am getting the error below but only on Azure, everything builds and runs fine on multiple machines running locally. But when I deploy to Azure I get the error below trying to login. Not even sure where to start researching this one
    Compilation Error
    Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. 
    Compiler Error Message: CS0103: The name 'model' does not exist in the current context
    Source Error:
    Line 1: @model Web.Models.LoginViewModel

    hi,
    From the error message, it seems like a MVC issue.
    I suggest you could re-configure your web configuration follow those solutions The name 'model' does not exist in current context in MVC3
    and
    Razor View throwing “The name 'model' does not exist in the current context” .
    And then you could try to deploy project to azure again. I think this error may be disappeared. Please try it.
    Regards,
    Will
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The unlocked IPhone 4S models will not be available until November, Why is that? Why would Apple do that? I should be able to buy a factory unlocked Apple iPhone 4S when it comes out! Why is my interests being put last and Sprint, Verizon

    The unlocked IPhone 4S models will not be available until November, Why is that? Why would Apple do that? I should be able to buy a factory unlocked Apple iPhone 4S when it comes out! I travel all over the world, and so that is why I need one like that. It is unfair to the consumer, and frankly turning away customers like myself willing to pay high dollar to Apple for their product, who can I speak with to complain about this, because I know their are factory unlocked iPhone 4S' sitting in a warehouse somewhere just waiting to be shipped, and I want one.  I know why, cause Apple signed contracts with each carrier so the carrier could increase their sales making customers sign 2 year contracts, I get it, I own my own business, but the delay of releasing factory unlocked ones is just not right and I should be able to buy one without having to buy it over in the UK where it is unlocked when it comes out right away, I should be able to buy it in my own country!  These business practices we practice in the US need to stop, their is a demand that needs to be met with consumers like myself who don't need subsidized iPhone's with 2 year contracts with carriers and don't mine paying full price for an unlocked one, it is unethical in a sense, forcing the customer to buy it with a carrier contract and NOT giving the customer the option to buy it full price and own it themselves, OR, making the consumer wait a month for that option to be available.  THEY SHOULD BE RELEASED AT THE SAME TIME!!!!!!  THAT IS THE RIGHT THING TO DO!!!!!!
    Apple can contact me and I will proudly pay for one.  But making me wait a month for an unlocked one, puts AT&T, Sprint & Verizon's interests before mine, and that is not right, for it is MY money that keeps you guys in business, so my best interests should come first!!!!!!!!!!!!!!!!!!!

    I understand your frustration, but when any form of rationing is required you have to prioritise. The number of unlocked vs packaged phones will be quite small and the number of unlocked buyers wishing to upgrade immediately will be smaller still. Against this you have the corporations sharing $billions between them.
    It would, you're correct, have been fairer to release all at the same time, but fairer doesn't come into it: it's business.

  • The built-in mic in g50 122ca laptop model is not working. please help me out.

    the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

    here is a sample code .
    so far you procedure looks good but
    i bet you have to specify the name of report , instead of 'filename'.
    see this
    Plist_id := GET_PARAMETER_LIST('P_name');
    IF NOT ID_NULL(Plist_id) THEN
    DESTROY_PARAMETER_LIST(Plist_id);
    END IF;
    Plist_id := CREATE_PARAMETER_LIST('P_name');
    ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
    ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
    -- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
    -- here Pro_License is the name of report.
    did you tried to see if the parameter passed using a message ?
    try
    message('parameter name'); pause; write this before "run_report".

  • Data modeler saving Physical model changes not saved

    I am using version 2.0.0.584.
    The bug fix list contains: 8722310: Save does not save physical model changes
    Hovever I still see unexpected behaviour.
    I created a physical model for "Oracle database 10g" and allocated a couple of tables to a different tablespace.
    I saved the physical model via Physical model--> right mouse button --> save all.
    I saved the model with File--> save
    I close the model.
    After opening, the physical model is not available anymore.
    After Physical model--> right mouse button --> open (for Oracle 10g) the contents are not the same anymore.
    Tablespaces with name "TableSpace3" and "TableSpace4" are added and objects belong to this tablespace.
    We do not have currently a workaround for this behaviour.
    Can anyone help?
    Thanks
    Edited by: 793016 on 06-Sep-2010 03:10
    Edited by: 793016 on Sep 6, 2010 12:14 PM

    Hi Philip,
    default tablespaces were defined and I removed this. It did not have a positive effect.
    Checking the log files was a good idea.
    The log file contained errors about files which could not be found on the system.
    I will do some additional tests and let you know.
    Thanks.
    Kind regards,
    Maurice

  • The UML Package model could not be resolved - SOLVED

    I am using Perforce with JDeveloper 10.1.3.2.0. I have imported a project into Perforce on one machine, then 'p4 sync -f' on another machine. I then created a new application on this machine and added the projects to it. Now, when I try to open a diagram in package 'model', it gives this message:
    The UML Package model could not be resolved
    The element may have been moved or deleted from the file system, or the Model path, source path or classpath may be incomplete. This error can also occur when the element was found, but errors in its definition prevented it from being loaded. Examine the error stack for further information on the exact cause.
    It also looks as if certain other files in the other projects are missing - it looks like a problem with the Perforce extension to me, or is it because I do it wrong?
    Message was edited by:
    jandersen

    It gets stranger and stranger, I think.
    As I told, I imported the project into Perforce, to a directory called /dtl/admintools, and found that I could still open all files - I did find that one file was missing (/dtl/adminstools/sysadm/SysAdm.jws), so I added it to Perforce. I then removed everything under /dtl/admintools and sync-ed it out from Perforce on the same machine - it still worked fine.
    I then went to my home computer and did the same thing (over a VPN) and checked that I had received all the files, which I had. I then tried to open /dtl/admintools/sysadm/Model/model/model/SysAdmDiagram.oxd_bc4j, which contains entity- and view objects - this give the error message. I can see all the objects listed in the structure list, but if I try to open any of them, I get the same message. There are no error messages other than the one that pops up.
    Both my workplace computer and my home one are AMD 64 machines running Gentoo Linux and it's the same version of JDeveloper too.

  • Do the Mac minis support using AirPlay and all of its functions?   I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay.  Thank you.

    Do the Mac minis support using AirPlay and all of its functions?   I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay.  Thank you.

    Hello,
    AirPlay Mirroring
    Requires a second-generation Apple TV or later. Supports the following Mac models:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)
    http://support.apple.com/kb/HT5444

  • Caf/eu/gp/model service not available (GP & BPM Connection)

    Hi all,
      we are trying to make a connection between Guided Procedure and BPM. We have configured the J2EE system and ABAP system accordingly. But when we try to use it from the J2EE system, we are getting an error - "caf/eu/gp/model Service not available in Target System". Is there any any way to get this service or any other workaround available?
    Thanks in advance,
    Anirban

    Hi all,
      we are trying to make a connection between Guided Procedure and BPM. We have configured the J2EE system and ABAP system accordingly. But when we try to use it from the J2EE system, we are getting an error - "caf/eu/gp/model Service not available in Target System". Is there any any way to get this service or any other workaround available?
    Thanks in advance,
    Anirban

  • Does model #D3A80A not have faxing capability?

     Does model #D3A80A not have faxing capability?     
    Product name:
    HP Deskjet 2543 All-in-One Printer
    Model name:
    D3A80A
    Serial number:
    [edited Serial Number by Moderator]
    So much for the advertised "all-in-one" on the box that coaxed me to purchase it.  :-(

    Hi HoustonClient,
    Thank you for visiting the HP Support Forums. I needed to edit your post and remove the Serial Number. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • HT1366 What size are the two audio ports on an older model MacBook, not MBP?

    What size are the two audio ports on an older model MacBook, not MBP?

    How come if I plug one of my two jacks on a headset it seems loose.  i know the single jack is supposed to be the same size, but it doesn't seem the same.
    If I get the two jacks to one jack adaptor, both ends 3.5mm is that correct?

  • Error : Model ISR_ not available

    Hello folks,
    I'm trying to generate standard webdynpro component FMCA_WDY_RETURN(Process Individual Tax Return). And iam not able to generate it. It gives me a error reading "Model ISR_ not available". Can someone explain me what it is and what could be done to generate the component.
    Thanks

    hi suri....
         check whether the particular component is activated in sicf transaction.
    ---regards,
       alex b justin

  • City Model does not display towers

    Hi Experts
    Anyone had this issue? Since applying the last OSS 2089805 - SP12: iCI Config App , my City Model does not have any data in the 'tower' section.
    The data must be there to display in the headings so what has happened to the centre section?
    Thanks
    Ian

    Hi Thomas
    Thanks for the advice. I have opened up an OSS note last night for this - 0000265077
    So I should always call CCLM as a transaction from the backend rather then go direct to the browser? I don't tend to ever use the workcentre approach.
    I've followed your instructions and the result is the screenshot below:
    The GET of the GraphValue return ok and I have then called this in a separate window to see the contents. See below:
    I'm not sure which part of this I need to inspect though so determine if the data is being sent correctly to the graph. Can you help with this?
    Also, I've just seen a couple of warnings so included these below. Do these have any bearing on the towers not being shown?
    Thanks
    Ian.

  • N73 software update "The Phone model is not curren...

    I am trying to update my N73 using Nokia software updater version 1.3.20 EN , but after Searching for a connected phone and detecting it the finally trying to Identify it , this error appear "Unable to retrieve phone information , the phone model is not currently supported" , while I already updated the firmware of my brothers phones N73 original and N73 music edition using the same nokia updater and the same PC and cable
    , Please if somebody know where the problem come from , It would be very appreciated to help me , thanks in advance
    current software Version 3.0637.0.0.14 , 07-10-2006 , RM-133 , Nokia N73 (08) , Product Number : 0539335

    02-Mar-2007
    12:58 PM
    orno wrote:
    hmm, thats a strange firmware version...i've never seen it mentioned anywhere before...
    anyways, try taking it to your NSC...maybe they can do something about it?
    Well , May be the NSC would do something abt. that , but sure that will be cash paid ,,,, I bought these sets from abroad (Dubai) with an International warranty - which doesn't apply in my country (Egypt) for an unknown reason - and of course I don't wanna pay for updating a brand new phone set ,,,,,

  • The post-expression for the step 'Set Station Global Models' could not be evaluated.

    When running a TestStand sequence, I get the following error message:
    The post-expression for the step 'Set Station Global Models' could not be evaluated.
    Variable or property types do not match or are not compatible.
    Error Code:  -17321; Variable or property types do not match or are not compatible.
    Although I do understand what the above is telling me, fixing the root cause is somewhat another thing.
    I'll explain the scenario.  The code is developped in TS4.1.0, although that should be irrelevant.
    I inherited a TestStand project which calls LabVIEW modules.  The original sequence works fine on the test pc (which is remotely located).  The local and remote PC's share the same StationGlobals.ini.
    Here is why it is strange..  I do get the error message on the local PC whether I use the old or the new code.  I was assuming that using the same StationGlobals.ini would have fixed that, but it didn't. 
    When I run the old code on the remote PC, I do not get that message, but I do get it with the new code.  I don't recall modifying code that affected the StationGlobals.  My goal is to fix it on both machines (at least the remote one).
    This is the expression that it does not like:
    StationGlobals.Models=Locals.Models,
    However, that very same expression exists in the original code.  The one thing that did change is the addition of a new model number in the Locals.Models.newNumber.  I suspect that this contributes to the error.  But why does it give me an error when I run the original sequence locally?  Maybe I should try running it again..
    In either case, any suggestions to overcome the error?
    Thanks.
    RayR
    Solved!
    Go to Solution.

    Please ignore post.
    I found the problem..  There was a mismatch with the number of models.  Easy fix.  It's all good.
    For someone else who might tumble onto this thread for the same reason, here's an explanation.
    I added a new model with its variants to the list of Locals.Models.  In total, there were 16 additions to the list.
    I also added these to the StationGlobals.  Which meant that my StationGlobals no longer matched the one on the remote PC. 
    Where the error came in is that there was one missing model in the StationGlobals, so the size (number of models) did not match that of the Locals. 
    Slight oversight in the sea of models that are listed (I'm not even going to count them).  Now fixed. 
    ... and embarrassed ...
    I may as well give myself an "Accepted Solution".
    Spoiler (Highlight to read)
    Since I've been naughty all year it will be my only Christmas gift..
    Since I've been naughty all year it will be my only Christmas gift..

  • Selected model does not contain any target value prior

    Hi ODM experts,
    I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
    uniq_rec ID NAME A1 A2 A3 A4 A5 data
    577     2052956018     NAMEHDRCP8     2.27     0.4     85.46     0.01     14.54     24-JAN-13
    578     1250914484     NAMEDJDRVP3     11.45     1.24     56.24     0.01     43.77     24-JAN-13
    579     1968689283     NAMEDKEND12     0.000011     6.78     0.000029     0.01     0.091     24-JAN-13
    580     2063389130     NAMEDNMXG14     0.000011     0.65     36.65     0.02     0.091     24-JAN-13
    unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
    I'm trying to execute the following code:
    drop table ALG_SET;
    exec dbms_data_mining.drop_model('SVMODEL');
    create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
    insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
    insert into ALG_SET values ('PREP_AUTO','ON');
    commit;
    Begin
    dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
    end;
    The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
    error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
    Please advice what is missing or wrong and if possible how to bypass this issue.
    Thanks in advance for support.
    Best Regards,
    Bogdan

    Here is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
    Rem
    Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
    Rem
    Rem dmsvodem.sql
    Rem
    Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
    Rem All rights reserved.
    Rem
    Rem    NAME
    Rem      dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
    Rem
    Rem    DESCRIPTION
    Rem      This script creates an anomaly detection model
    Rem      for data analysis and outlier identification using the
    Rem      one-class SVM algorithm
    Rem      and data in the SH (Sales History)schema in the RDBMS.
    Rem
    Rem    NOTES
    Rem   
    Rem
    Rem    MODIFIED   (MM/DD/YY)
    Rem    amozes      01/23/12 - updates for 12c
    Rem    xbarr       01/10/12 - add prediction_details demo
    Rem    ramkrish    06/14/07 - remove commit after settings
    Rem    ramkrish    10/25/07 - replace deprecated get_model calls with catalog
    Rem                           queries
    Rem    ktaylor     07/11/05 - minor edits to comments
    Rem    jcjeon      01/18/05 - add column format
    Rem    bmilenov    10/28/04 - bmilenov_oneclass_demo
    Rem    bmilenov    10/25/04 - Remove dbms_output statements
    Rem    bmilenov    10/22/04 - Comment revision
    Rem    bmilenov    10/20/04 - Created
    Rem
    SET serveroutput ON
    SET trimspool ON 
    SET pages 10000
    SET echo ON
    --                            SAMPLE PROBLEM
    -- Given demographics about a set of customers that are known to have
    -- an affinity card, 1) find the most atypical members of this group
    -- (outlier identification), 2) discover the common demographic
    -- characteristics of the most typical customers with affinity card,
    -- and 3) compute how typical a given new/hypothetical customer is.
    -- DATA
    -- The data for this sample is composed from base tables in the SH schema
    -- (See Sample Schema Documentation) and presented through a view:
    -- mining_data_one_class_v
    -- (See dmsh.sql for view definition).
    --                            BUILD THE MODEL
    -- Cleanup old model with the same name (if any)
    BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
    EXCEPTION WHEN OTHERS THEN NULL; END;
    -- PREPARE DATA
    -- Automatic data preparation is used.
    -- SPECIFY SETTINGS
    -- Cleanup old settings table (if any)
    BEGIN
      EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
    EXCEPTION WHEN OTHERS THEN
      NULL;
    END;
    -- CREATE AND POPULATE A SETTINGS TABLE
    set echo off
    CREATE TABLE svmo_sh_sample_settings (
      setting_name  VARCHAR2(30),
      setting_value VARCHAR2(4000));
    set echo on
    BEGIN      
      -- Populate settings table
      -- SVM needs to be selected explicitly (default classifier: Naive Bayes)
      -- Examples of other possible overrides are:
      -- select a different rate of outliers in the data (default 0.1)
      -- (dbms_data_mining.svms_outlier_rate, ,0.05);
      -- select a kernel type (default kernel: selected by the algorithm)
      -- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
      -- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
      -- turn off active learning (enabled by default)
      -- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
      INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
      (dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines); 
      INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
      (dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
    END;
    -- CREATE A MODEL
    -- Build a new one-class SVM Model
    -- Note the NULL sprecification for target column name
    BEGIN
      DBMS_DATA_MINING.CREATE_MODEL(
        model_name          => 'SVMO_SH_Clas_sample',
        mining_function     => dbms_data_mining.classification,
        data_table_name     => 'mining_data_one_class_v',
        case_id_column_name => 'cust_id',
        target_column_name  => NULL,
        settings_table_name => 'svmo_sh_sample_settings');
    END;
    -- DISPLAY MODEL SETTINGS
    column setting_name format a30
    column setting_value format a30
    SELECT setting_name, setting_value
      FROM user_mining_model_settings
    WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
    ORDER BY setting_name;

Maybe you are looking for