Model view (t-code- bd64) configuration issue

1) Is it possible with out  distributing customer distribution model in outbound side ,can we receive idoc data in inbound side?
2) after distribution of model view in  outbound side  is it possibel to create filter techniqe in inbound side?
Thanks
Bhaskar Reddy

Hi,
1) Is it possible with out distributing customer distribution model in outbound side ,can we receive idoc data in inbound side?
- Yes, if is not MASTER data, probably you do not need to configure BD64 for outbound IDoc.
2) after distribution of model view in outbound side is it possibel to create filter techniqe in inbound side?
- You can filter in the Distribution Model easily. So you should use it for filtering data. Otherwise you need to filter it programmatically in some customer-exit.

Similar Messages

  • What is model view, process code

    hi, plz tell me what model view and process code

    I am in ECC 5.0, in which no process code available for this. Process code is available for Inbound processing. You may have to create custom process code and write the code for populating IDOC segment data.

  • Is model view(BD64) necessary for EDI

    is model view created using BD64 necessary for a EDI transactions? I have created a logical system, a RFC destination and a EDI File Port.
    After all this i am trying to push a material master data using BD10 to the file port. When i do that the system gives me a message saying that master idoc created but it does not create a communication idoc. Only if i have a Model view set up in BD64 it creates a communication idoc. So my question is do we need a model view for EDI configuration?
    ~Suresh

    Hi,
    BD64 is required for master data distribution..
    If you are having a interface that sends IDOCs to the customer or receive IDOCs from the vendor..You don't require BD64 setup..
    Thanks,
    Naren

  • IDoc to IDoc scenario: distribute the model view

    Hi!
    I try currently to  configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
    ERP:100 (Sender)
    ERP:200 (Receiver)
    and XIB:100 (XI system)
    I successfuly created  a message type and generated the model view in tcode BD64.
    Question:
    When I try to distribute the model view which system should I choose?
    a) XI System or
    b) Receiver system ERP:200
    When  I choose the receiver system ERP:200 and get the following error
    Target system: ERP:200
    Model view ECCCLNT100 has not been updated
    Reason: Distribution model is currently being processed
    When I try to choose my XI system I get the following error:
    Target system: XIB:100
    RFC destination for synchronous communication (message type SYNCH)
    Partner profile LS PIBCLNT100 SYNCH does not exist
    Generate partner profile
    or specify outbound partner profiles for message type SYNCH
    Is that an error? If yes, how can I fix them?
    Thank you very much
    Thom

    Hi
    Look my reply on this thread regarding SYNC Message Type.
    Re: problem while distribute model view
    When I try to distribute the model view which system should I choose?
    a) XI System or
    b) Receiver system ERP:200
    You are sending IDoc to XI then R/3 so select XI system. because receiver of IDoc is XI then IDoc would be send from XI.

  • IDOC Model View Generation Issue

    Hi all,
    I am working on IDOCS and I am facing the follwing error when I try to distribute the Model View in IDOC--
    "the following ALE connection already exists in model view HR_TO_PI"
    I had deleted the above "HR_TO_PI" model view and I created a new one with new name.
    But I still get the same message.
    I don't think this is an issue with configuration.
    I am assuming it's an issue with table entries. Does this-"HR_TO_PI" value get stored in any table in the back end ?
    Kindly help. I had a look at SDN and other places but they all ask to check for partner profiles and logical systems which I believe I have configured right.
    Warm regards,
    Hari Kiran
    Edited by: HARI KIRAN REDDY on Feb 23, 2012 11:24 AM

    Hi Sravan,
    I had a look at TBD00. It shows all my current distribution models but not the one mentioned in the error.
    I had a look at some other tables in the TBD series but of no help.
    I don't know in which table  that entry has ended up.
    It's frustrating.
    Thanks for the input once again.
    Warmr egards,
    Hari Kiran

  • Unable to Distribute Model View in BD64

    Hi Gurus,
    Model View - SR2CLNT251
    Receiver of Model View - EA1CLNT251
    i went to txcode bd64 > i clicked on model view SR2CLNT251 then went to edit > model view > distribute and clicking the logical system of EA1CLNT251. then error will be encountered.
    Model view SR2CLNT251 has not been updated
    Reason: No authorization to change model view SR2CLNT251
    .....authorization object B_ALE_MODL
    .....Parameter: activity 02, model view SR2CLNT251
    i already given correct authorization to my ID, but still the error persists.
    Please help. Thanks!
    Regards,
    Tony

    Hi Tony,
    You need  authorization for authorization object  'B_ALE_MODL'  in system I guess either in system SR2CLNT251  or in EA1CLNT251.
    Best Regards,
    Tushar

  • Reg. Model View BD64

    Hi,
    I have created a model view  and generated the partner profiles. when i am distibuting the model view, I am getting an error " Model View XXXX has not been updated"  "Reason: Maintenance systems for model view XXXX are not identical".
    could anybody tell me , how to resolve this issue.
    Thanks & Regards,

    Any luck with the resolution to this error?
    Thanks,
    John

  • Profit cebter and copany code configuration issue

    i am making one sales order in which the item number level when i put profit center GB03100004 earlier i was getting company
    code in profit segment as GB03, but now i am getting as GB01.
    is this related to any configuration issue, please let me know.

    Hi,
    Goto the T.Code KE53.
    Enter the Controlling area.
    Enter the profit centre.
    Click on Company Codes.
    Check for which company code the field "Assigned" is ticked.
    Please check with your FICO consultant for more information and modifications.
    Regards,
    Krishna.

  • BD64-Log of Model View Error

    Hi,
    In  BD64 I have defined the model and also successfully created the partner profile.But after that when I am trying to do Edit/ModelView/Distribute I am getting following error.Can you please help me why am I getting this error?
    Target system TESTECF800                  Model view MATERIAL has not been updated
                                                             Reason: No authorization to create model view MATERIAL
                                                          ..... authorization object B_ALE_MODL
                                                    ..... Parameter: activity 01 , model view MATERIAL
    Regards,
    Bedayan.

    Hi Bedayan,
    As per the error your current profile is not having proper authorization to maintain model view. I think your basis people have revised the authorization objects.
    I donot have the authorization to distribute the model view to the target client
    Reddy

  • BD64 - Distribute Model View error?

    Hi, Expert:
    when I distribute model view using BD64. the following
    error message comes:
    "Target system is an external System. It does not support this function."
    what's the problem? thanks

    hi
    good
    go through this link, which ll give you brief idea about the model view -BD64, i hope this ll help you to solve your problem.
    http://www.supinfo-projects.com/cn/2005/idocs_en/2/
    thanks
    mrutyun^

  • BD64 Model View - Wrong Maintenance System

    Hello.
    We refreshed our QA system from Production.  Production is in a different CUA than our test systems.  The QA system still thinks that it is in the production model view n BD64 and I cannot get it to accept the new distribution model from the CUA for our test systems.  Furthermore, the entries in BD64 in the QA system are grayed out and cannot be deleted locally.  The production CUA doesn't recognize the new system at all either.
    How can I get the QA system to point to the right maintenance system in BD64?
    Thank you.

    Nevermind.  I deleted the DM and redistributed.

  • Error in distributing the Model View in BD64

    Hi Experts,
    I have some problem in distributing model view in BD64. please see here the error details:
    Model view <logical client> has not been updated
    Reason: No authorization to create model view <logical client>
    .....authorization object B_ALE_MODL
    .....Parameter: activity 01, model view <logical client>
    i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
    Please help.
    Thank you,
    Tony

    Hi Experts,
    In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
    Edited by: Tony on Aug 3, 2011 4:30 AM

  • IDOC to IDCO scenario: Distribution of model view

    Hi!
    I try currently to configure a IDoc to IDoc scenario for SAP ECC 6.0 system with following business 2 systems:
    ERP:100 (Sender)
    ERP:200 (Receiver)
    and PIB:100 (XI system)
    I successfully created a message type u201CZCREMRu201D and generated the model view PIMODEL in tcode BD64.
    Sender: ERP:100
    Receiver: PIB:100
    I assigned 3 partner profiles ERPCLNT100, ERPCLNT200, PIBCLNT100 and assigned a message type SYNCH with IDOC type SYNCHRON as outbound parameter.
    Unfortunately when I try to distribute the model u201CZCREMRu201D and choose my XI system I get the following error:
    Distribution of model view PIMODEL
    Target system PIBCLNT100      
    Model view PIMODEL has not been updated
    Reason: Distribution model is currently being processed
    Question:
    Do I miss some other inbound and outbound parameters?
    IF yes, which and on which systems?
    Thank you very much!
    regards
    Thom

    Hi Rob
    Y're right i made mistake when i was creating in SRM RFC destination puting host name of SRM system  not ERP.
    Thanx
    Marcin

  • Oracle 11g R2 Model view DML formulae/programs

    Hi All,
    We are in the process of migrating our cubes from 10.2 to 11.2. We have lot of DML formulae and programs in object view in our current environment(10g). As 11g R2 does not support Object view we are trying to move all our formuale and programs to model view. We are looking for some guidance/suggestions on this topic.
    Our current problems are we have lot of formulae of different dimensionality in our object view for ex if we have 6 dim then we have DML formulae from different combinations of these 6 dimensions which is forcing us to create cubes(logical) of all these different dimension combinations.
    I saw somewhere online I can edit awm.properties file and still can use Object view in 11g also. I am not sure that is a best practice. Eventually object view completely gets locked from users in next releases?

    The object view is not supported in 11g. While it is true that you can enable it as Brijesh describes, it will not display 11g generated objects correctly. One technical issue is that the java code in the object view attempts to parse the object definition in the client. (e.g. DEFINE xyz VARIABLE INTEGER). It has not been updated with new 11g keywords (such as LOCKDFN), and frequently produces errors or (which is worse) misleading information. You could try OX if you can track down a copy.

  • Distribution of Model View in ALE

    Hi Experts,
    I am setting up an ALE distribution of application data during which i am facing a problem durin ste step
    of "Distribution of Model View" .
    I am getting an error RFC destination does not exist , though i have created my RFC destinarion and i checked it using "Test Connection" & "Remote Logon".
    Please Suggest me.
    Regards.
    Shrikant.

    Hi,
    Follow these below steps for ALE configuration
    Step1: Creation of Logical system u2013 Transaction BD54
    Step 2: Assigning client to Logical System u2013 Transaction SCC4
    Step 3: Creation of RFC destination u2013 Transaction SM59
    Two RFC destination needs to be created u2013 one at the sender with the destination as the receiver, and another at the receiver with the destination as the sender.
    Step 4: Port generation u2013 Transaction WE21 - Port is required for the outbound message type and hence port generation is required only at the sender.
    Step 5: Creation of partner profile u2013 Transaction WE20
    Both outbound and inbound partner profiles need to be created.
    Step 5.1: Creation of outbound partner profile.
    Step 5.2: Creation of inbound partner profile.
    Step 6: Creation of Distribution Model u2013 Transaction BD64 - This needs to be done at the sender
    Regards,
    Jyothi CH.

Maybe you are looking for

  • New Features for OWB 9.2

    Mark Van De Wiel mentioned yesterday in this forum that OWB 9.2 is now available at http://otn.oracle.com/software/products/warehouse/content.html . From the version number it would appear that this is a major new release, and it's a separate install

  • Left margin elements no longer reachable ???

    Hi. Problem with Notes(can't reach the left margin elements) once i modified a document in my iPad and open it back on my iMac. First of all i did opened a form in Notes on my iMac titled " Modern photographer letter" There is a left column that acts

  • Forwarding cell phone number to skype online numbe...

    Is it possible to forward cell phone number to skype online number?  If so, what do I need to do to set it up?  Also, would my carrier (T-Mobile) charge me minutes for forwarded calls? Thanks. Solved! Go to Solution.

  • Macbook pro with Retina black display

    Hi All, I was working in my laptop (MacBook Pro late 2013 with retina) normally for maybe 30 min and suddenly the display become black and the laptop doesn't work. I used turn off bottom to shutdown it. This happened twice. Please, help me with this

  • Yosemite tries to open another photoshop using "open with"

    Hi there, I upgraded to Yosemite a few days ago.  When I right click on a jpeg and ask it to "open with" Photoshop it tries to open another Photoshop. By this I mean that a second Photoshop icon appears in the dock bouncing up and down, even if I alr