Modeler error messages - more info not provided!

Dear Friends,
I got an error executing a planning sequence of function type 'generate combinations'.
The system messages on the top section of the modeler are :
1. first message :
"Planning function Gen Combinations ( ended with errors"
2. subsequent messages are in green (no error)
"Context information for the other messages"
3. Selection for characteristic xyz : Single value 123 (no error)
: < similar ok messages follows >
2nd Error message :
"Cannot generate combinations for MultiProvider 'AGGR_LEVEL'"
this is followed by
3rd Error message :
"Cannot generate combinations in step 'xx'"
When double clicked on these error messages in the modeler, nothing appears to show more error info.
Could you experts kindly let me know how can I find out what these errors mean , specifically:
1. For the 3rd error, how can I know what is the step 'xx' about that the system is referring to where it cannot generate combinations? Is it in the filter, char relationship, or exits?
2. For the 2nd error What does it mean cannot generate combinations for multiprovider? Could you tell me more about what this means in terms of where is the problem?
Thanks in a advance!!
regards
YHogan

Dear Gregor,
For a planning sequence using planning function of type 'generate combinations', in general does this process work in the following sequential step ? :
1. check the filter
2. generate the combination based on filtered values
or is it the other way round?
I am trying to know where the error lies since it errored so early in the process , about 3 seconds upon executing the sequence via program RSPLS_PLSEQ_EXECUTE.
I set break point on the class mentioned to no avail as the generate combinations sequence ended with error very early in the process.
I also set breakpoint on the characteristic relationship class used as well as standard variable exit include program. Also to no avail as the program errored before these stages as none of the breakpoints appeared in debug mode before the error.
The error message is " cannot generate combinations in step '04' "
Kindly could you shed more light on this error in terms of what it is referring to?
Is the problem with master data , filter or characteristic relationship?
Based on my testing done with breakpoints, seems that its not filter or characteristic relationship error.
So, does this mean master data error?
How could master data be having error?
Most characteristic relationship used are attribute types. There are 2 using classes.
Thank you in advance.
regards
YHogan
Edited by: Yohannes Hogan on Jun 20, 2008 1:03 PM

Similar Messages

Modeler error messages - more info needed!

Dear Friends,
I got an error executing a planning sequence of function type 'generate combinations'.
The system messages on the top section of the modeler are :
1. first message :
"Planning function Gen Combinations ( ended with errors"
2. subsequent messages are in green (no error)
"Context information for the other messages"
3. Selection for characteristic xyz : Single value 123 (no error)
: < similar ok messages follows >
2nd Error message :
"Cannot generate combinations for MultiProvider 'AGGR_LEVEL'"
this is followed by
3rd Error message :
"Cannot generate combinations in step 'xx'"
When double clicked on these error messages in the modeler, nothing appears to show more error info.
Could you experts kindly let me know how can I find out what these errors mean , specifically:
1. For the 3rd error, how can I know what is the step 'xx' about that the system is referring to where it cannot generate combinations?
2. What does it mean cannot generate combinations for multiprovider? Could you tell me more about what this means in terms of where is the problem?
Thanks in a advance!!
regards
YHogan

Dear Gregor,
For a planning sequence using planning function of type 'generate combinations', in general does this process work in the following sequential step ? :
1. check the filter
2. generate the combination based on filtered values
or is it the other way round?
I am trying to know where the error lies since it errored so early in the process , about 3 seconds upon executing the sequence via program RSPLS_PLSEQ_EXECUTE.
I set break point on the class mentioned to no avail as the generate combinations sequence ended with error very early in the process.
I also set breakpoint on the characteristic relationship class used as well as standard variable exit include program. Also to no avail as the program errored before these stages as none of the breakpoints appeared in debug mode before the error.
The error message is " cannot generate combinations in step '04' "
Kindly could you shed more light on this error in terms of what it is referring to?
Is the problem with master data , filter or characteristic relationship?
Based on my testing done with breakpoints, seems that its not filter or characteristic relationship error.
So, does this mean master data error?
How could master data be having error?
Most characteristic relationship used are attribute types. There are 2 using classes.
Thank you in advance.
regards
YHogan
Edited by: Yohannes Hogan on Jun 20, 2008 1:03 PM

Error Message: iTunes could not back up the iPhone because an error occurred

Error Message: iTunes could not back up the iPhone because an error occurred.
The thing is - I have no idea what error have I encountered!
Usually, I would assume the previous backup file is corrupted and I will proceed to delete the old backups. I did the same this time round, and it's still unable to sync. Now I have no more backup files!
I have tried -
1. Deleting old backup files.
2. Restarting iPhone 4S & iMAC.
3. Remove
I am using iOS 5.1 on iPhone 4S, and iTunes 10.6.1 on Mac OSX Lion. My phone is not jail-broken in the first place.
Does anyone face the same problem?
I need to back up my files!!!

Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas.

I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

I keep getting an error message that reads: Not enough storage This iphone cannot be backed up because there is not enough icloud storage available. What does this mean? How do I fix it?

Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: go to Settings - iCloud - Storage and backup - turn off the iCloud backup
and backup with iTunes from now on
More info on backing up: http://support.apple.com/kb/ht1766
Or, if you prefer to keep backing up with iCloud, check out this article, it will help you understand how to manage the iCloud storage:
http://support.apple.com/kb/ht4847

When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?

When attempting to install OS X Mountain Lion I get the following error message "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." Any idea what the issue might be?

Mama --
Which Mac??????
iMac, MacBook Pro, Mini,, what?
Go up to the Apple icon on the upper left hand corner of your screen (menu bar).
Click that, and then "More Info". and then "More Info" again.
What does it say? Here's what mine says:

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

One thing that might help.
1. open itunes preferences from the edit menu and click on the devices tab.
2. check the box to disable syncing for iphones connected to itunes and click ok.
3. Then click the button to reset sync history.
4. Now click ok to close the preferences window.
5. connect the iphone to itunes and go to the info tab.
6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
7. then click apply on the bottom right of itunes.
This will overwrite any events on the iphone, including any events that has become corrupted.
Hope this helps

I bought a Mac Book Pro retina display, Serial Number C02J2****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. t

I bought a Mac Book Pro retina display, Serial Number C02J*****2, on 8/11/2012. Unfortunately, I am unable to download updates from the App store.Whenever I tried to download updates, it shows me an error message, "we could not complete your request. there is an error in the App Store. Try again later (100). Your Apple ID has been disabled, contact iTune support". However,the problem still persists even after my password has been successfully reset. What is is the error in the app store? I really need help to resolve this issue.
Moreover,I also need help how to update to the mountain lion free of charge as my Mac pro is four(4) days old.
Sincerely
Asrat Kahsay
N.B. I'M not exactly sure the operating system is "Mac OS X v10.7.x". However, I do know for sure it's Mac OS X v10.7.4
<Edited by Host>

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The OS X Mt Lion up-to-date program;
http://www.apple.com/osx/uptodate/

How to get rid of the error message we could not complete your iTunes store request?

How to get rid of the error message we could not complete your iTunes store request?
having this problem when trying to authorise an newly downloaded app in iTunes

Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
Do not change your settings.
Edit

HT201210 im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

im trying to restore my iphone 4 but getting error message as could not be contacted or temporarily unavailable plz help

Hey santhosh.pv,
We have a few articles that can help troubleshoot the alert message in iTunes you see when you are trying to restore your iPhone 4. You can resolve many restore issues using the troubleshooting steps documented here:
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
The next article is the companion of the more general article above. Follow the above article first. If, after following that article, the issue persists, continue with this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Cheers,
David

Download error, message body could not be downloaded

Someone please help me with this. I've had the Q10 since it came out and ever since I've had it there are emails that will just not open. These emails are simple text emails. I thought this was normal and didn't think anything of it until I spoke to a coworker who also has a Q10 and he is not having the same issue. So I searched high and low to try and find a solution and nothing.
To be clear this only happens to a few emails.
I tried pulling the battery.
I tried software updates. I am running BB 10 OS Software Release 10.1.0.238. Nothing better then this available.
I tried deleting anything older emails since I did see somewhere in my search for an answer that there maybe an old email with odd characters causing the issue.
Still nothing.
When I open the email I get the header info i.e.. Who it was sent to, from and subject. I get the flower with the word image001.jpg and the size of the file (again this is a txt file no images). And in the middle of the screen I get the circle going around for about a minute as if it's loading and then the error pops up;
Download Error
Message body could not be downloaded
Cancel OK
hitting Cancel or OK just brings me back to my list of emails
Any suggestions of fixes would be appreciated.

i have the same " download error " but with BBM invites

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files the error message is could not be opened. The movie's file format isn't recognized. " Any help or are they corrupted

I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?

Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files.

What does the Error Message: "File format not supported" mean?

When I first open an existing project, I get an Error Message: "File format not supported". After a few seconds all the windows open up and I can continue to edit. My question is will this "File format not supported" haunt me later or shall I continue to edit as I am doing? Why does this error message come up? All the current footage is shot on same camera, the Canon 5D Mark III at 23.98 time code rate, 1920 x 1080.

More information might help someone help you - Information FAQ http://forums.adobe.com/message/4200840
Also, are your files on an external drive?

Error Message : Object could not be scheduled within the specified time interval

Post Author: mohamed elkashef
CA Forum: Publishing
Dear All when i try to run event for daily reports it sometimes take generation status failed with this error message : Object could not be scheduled within the specified time interval so i need to know the reason of failure and how can i fix this error thanks a lot

Post Author: nvnaresh
CA Forum: Publishing
Dear jsanzone,
I'm facing the same error even when the server time out is more than the query execution time of the report.By server time out I assume connection time out of WebI report server which I have set to 180 min.But the actual query takes maximum of 5 min.
We are using BO XIR2+SP2.
I scheduled a webI report to get saved in Excel format to an Unmanaged disk location upon a File Event.
We have 3 such reports to be scheduled on the same event.
Expected frequency of File Event getting fired in a day is twice.Scheduling frequency I have set it as every one hour with the file event.
This usually should work fine.
But frequently 1 or 2 of the above 3 instances are getting failed with the following error "Object could not be scheduled with in specified time interval " after being in Running state for few hours(8). Amazingly this is not happening every time. May be once or twice in a week.This works fine after I restart the BO services and the same thing repeats after 3 or 4 days.
Do I need to increase any server parameters?
Why is this happening randomly?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

Cant open itunes. Get error message CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll. Anyone know how to fix that?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Continue to get error message "backup could not be completed" after purchasing additional storage

continue to get error message "backup could not be completed" after purchasing additional storage

Just wanted to update the community on my exciting adventure to fix my ipad;
I made my way over to the Apple Store here in South Florida and had my appointment with the geniuses. No one could figure this sucker out! They did every thing they could think of to the ipad without success. Couldn't even tell me what the problem was. All were very nice about it, of course. I was told to wait a day while they contacted the great and powerful central genius(es) but apparently no one was home there since they never responded to the request for help.
Anyway, I will go back to the Apple Store one more time before I give in to the conclusion that my 3 year old iPad (original) is DOA

Modeler error messages - more info not provided!

Similar Messages

Maybe you are looking for