Modeling Question... need a quick response.

Hi All,
I have developed a dash board recport to count the no of orders with in a work center. there are many metrics. Here is how it is being done.
1. load data source to Ware House layer.
2. Warehouse layer to Appl layer, where I count the operations. (an order could have many operations)
3. Appl layer to Appl layer 2 - where I count Orders - and all key figures are set to overwrite. So between two loads I will retain only the latest count for the same keys.
4. Appl layer to Cube where I count the same orders again, just to make sure it is all 1 if conditions satisfy.
All looks good when the first load goes to the cube. Now wehn the delta comes in some of the orders come again and they get counted again and I see 2 records in the cube added on two different dates.
now if I remove my time dimension I wil have the counts become added together for same orders ( count > 1)
How can I avaoid this doubling in this model or any changes where the count should be counted once or show the real count on my dash board.
thank you.
Alex.

Thank Nareen.
Yeah the behavious of the cube will hurt the process when i do Delta. If that is changed to Delta with delete overlapping I can get this done. I am thinking about the volume in the future would substantially delay the SLA.
Also master data will not solve this problem since I need trend and history of process on each order. Unless I change that to time-dependent and again that will add more issues.
Thanks for your reply.

Similar Messages

I need a quick response

HI, i have to recomand some solution for.
they have two databases all is running fine but there is one table which they want to sync every week.
so whats your suggestion in this regards.
what i have recomands is incrmental export import but that is now obsolete for specific owner or table but yes you can do for whole database. i am getting this error while doing.
EXP-00041: INCTYPE parameter is obsolete
EXP-00021: can only perform incremental export in Full Database mode
EXP-00000: Export terminated unsuccessfully
so now any other suggestion???

My version is 10 rel 2
Cant use archive because no network connectivity and if you are suggesting me for logical standby than its not appropriate.
I will use some channel to move dmp or what ever suggested files.
-- are there updates or not ?
Yes there are updates and insert and delete.
--What are these others users (did they work on them own schema ? did they work and declare on the primary?) ?
ok let me explain you
I have 2 sites(a site and b site) and one centralized. A and B site have there own schema and their user work on it like theor is one table trades, in both A and B sites which have different data.
And I have no issues if the site are sync or not . we are ok with that.
Now every week for reporting or monitering purpose I need that trade tables from both sites in centralized database . that centralized database is for his own purpose and nothing to do with other sites except one trade table.
one more that centralized site is not linked wwith A and B sites because these sites different orginazations.
Message was edited by:
Umair Malik ([email protected])

Quick MIDP2 question (needs a quick answer!)

Do all MIDP2 phones have a 'C' (cancel) button?

I...
1. Searched google (with no answers)
2. Asked on here
3. Found the info elsewhere
4. Shared the answer
Nothing wrong with that.

Need SRM Library and model question

Hello,
I am going to write SRM Certification Exam.
can any body help how to down load the SRM Library from internet,i wanted to prepare offline in home.
and also need some model question papers and material.
pl.send to my e-mail:[email protected]
thanks.

Hi
<b>Please download the SAP SRM Libraray from the link below.</b>
http://help.sap.com/content/documentation/sbs/docu_sbs_srm.htm
Also, Sent the require details at your email id. )
Regards
- Atul

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

Does the Canada ONLINE Apple store sell the unlocked iPhone 5 model "A1429 CDMA"? Need a quick reply please ..

http://www.apple.com/iphone/LTE/

I need scjp 1.5 model questions...

i am preparing for SCJP1.5 which i should have to write before the end of this year.
i am reading Kathey sierra for that.
and i am testing myself by doing questions in Danchilosm and khalid moghal book.
one more thing is i have test killer also...
let me know the name of the sites from which we can get similar model questions in SCJP exam.
can you help me by sending response?

don't crosspost.

Hoping for a quick response : EXP and Archived REDO log files

I apologize in advance if this question has been asked and answered 100 times. I admit I didn't search, I don't have time. I'm leaving on vacation tomorrow, and I need to know if I'm correct about something to do with backup / restore.
we have 10g R2 running a single instance on a single server. The application vendor has "embedded" oracle with their application. The vendor's backup is a batch file using EXP - thus:
exp system/xpwdxx@db full=y file=D:\Orant\admin\db\EXP\db_full.dmp log=D:\Orant\admin\db\EXP\db_full.txt direct=y compress=y
This command is executed nightly at midnight. The files are then backed up by our nightly backup to offsite storage media.
Te database is running in autoarchive mode. The problem is, the archived redo files filled the drive they were being stored on, and it is the drive the database is on. I used OS commands to move 136G of archived redo logs onto other storage media to free the drive.
My question: Since the EXP runs at midnight, when there is likely NO activity, do I need to run in AutoArchive Mode? From what I have read, you cannot even apply archived redo log files to this type of backup strategy (IMP) Is that true? We are ok losing changes since our last EXP. I have read a lot of stuff about restoring consistent vs. inconsistent, and just need to know: If my disk fails, and I have to start with a clean install of Oracle and nothing else, can I IMP this EXP and get back up and running as of the last EXP? Or do I need the autoarchived redo log files back to July 2009 (136G of them).
Hoping for a quick response
Best Regards, and thanks in advance
Bruce Davis

Bruce Davis wrote:
Amardeep Sidhu
Thank you for your quick reply. I am reading in the other responses that since I am using EXP without consistent=y, I might not even have a backup. The application vendor said that with this dmp file they can restore us to the most recent backup. I don't really care for this strategy as it is untested. I asked them to verify that they could restore us and they said they tested the dmp file and it was OK.
Thank you for taking the time to reply.
Best Regards
BruceThe dump file is probably ok in the sense it is not corrupted and can be used in an imp operation. That doesn't mean the data in it is transactionally consistent. And to use it at all, you have to have a database up and running. If the database is physically corrupted, you'll have to rebuild a new database from scratch before you can even think about using your dmp file.
Vendors never understand databases. I once had a vendor tell me that Oracle's performance would be intolerable if there were more than 5 concurrent connections. Well, maybe in HIS product ..... Discussions terminated quickly after he made that statement.

Warranty for MSI GTX570 - need help quickly please!

Hi. I have MSI GTX570 OC. I just bought Accelero Xtereme Plus cooler, and I plan to remove reference cooler and put this aftermarket one. But I heard that removing the cooler would void my warranty. I hope that is not right. So I need quick response on that question, because I want to put it on my card ASAP.
So, dear MSI users, or administrators, please tell me if my warranty would still be valid if I change the cooler - but of course without damaging the card in any way

Quote from: fi011 on 31-October-11, 02:47:05
haha komsija
How do you mean very careful? Of course I wont damage the card, If that is what you mean, I will do it gently, but whatever I do, Im pretty sure that there would be marks on screws from screwdriver. And Im worried that it could be their proof that the card is opened...
Yes, this i mean
Quote
but whatever I do, Im pretty sure that there would be marks on screws from screwdriver. And Im worried that it could be their proof that the card is opened...
Nope, from screwdriver you have to push it really hard to make sings over the screws.
If you're gentle they are unscrewed very easy.
Quote
And Im worried that it could be their proof that the card is opened...
The card itself has 2 elements, entire cooling system and graphic card pcb itself.
The warantee sticker is over the msi's coolling system, if you try to dissassmeble msi's cooler this will void warantee.
Also even if they know that cooler has been removed, for reapply TIM for example,
they still can accept it if there is no physical damages over it.
However, at the end its down to msi or reseller itself, will they accept your card or not.
But if warantee sticker is instact and there is no any physical damages over the card,
normally they will accept it

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Hi, I am oracle apps HRMS Technical consultant.I wanted to know ,can we implement Digital Signatures in Oracle apps 11i XML Reports.if yes what is the approach to do so ? Your quick response is appreciated. Regards , Aasma Sayyad.

Hi,
I am Oracle Apps HRMS Technical Consultant.
I wanted to know,if we can implement Digital Signatures in XML Reports for Oracle Apps HRMS 11i Aplication.
If yes,what is the approach to do so.
Your quick response is appreciated.
Regards,
Aasma Sayyad.

Hi Aasma,
The standard BI Publisher is part of EBS applications.
Most of the EBS reports(R12) are based on BI Publisher.
If you check the responsibility 'XML Publisher Administrator' you will see all the templates used in the application.
Your technical team should already know this.
On the other hand OBIEE would need separate licences.
But for you BI Publisher would do.
Cheers,
Vignesh

Please, need a quick respon

I have just purchased a Zen Micro Photo. I was told by an employee at the store that the install cd is not needed for anything and that you can just "plug & play" the player with WMP0. But inside the Creative booklet there is a warning not to connect the player w/o installing the cd. Which is true? Will I hurt the player if I do not use the install cd? A quick response would be appreciated. Thanks all!

coolguy2420 wrote:I have just purchased a Zen Micro Photo. I was told by an employee at the store that the install cd is not needed for anything and that you can just "plug & play" the player with WMP0. But inside the Creative booklet there is a warning not to connect the player w/o installing the cd. Which is true? Will I hurt the player if I do not use the install cd? A quick response would be appreciated. Thanks all!
The guy from the store is pretty much correct. The ZMP comes with the PlayForSure/MTP firmware, and the drivers are provided by Windows Media Player 0, and you can use WMP0 or Windows Explorer to copy files to and from the player.
You can though install Creative's software if you want, which is on the CD obviously. Worth checking for updates also at the download page.

Need a quick help on Pro*C

Hi All,
I need a quick help on Pro*C. Here's the details on the same:
- My program takes one input file as parameter. Lets assume argv[2] is the name of the inputfile, which is my input parameter as well.
- ps_filename = argv[2]; I'm copying argv[2] i.e. filename in a variable called ps_filename
- Now this inputfile can be of two types, say type A_yyyymmddhhmmss.dat and B_yyyymmddhhmmss.dat.
- Therefore for every run I'll have one of this value as input parameter which will be copied into the ps_filename.
- Now I need to call two different functions based on the inputfile i.e. if ps_filename like 'A%' then call func A() else call func B();
But in ProC/C there is no provision to use like operator.
Therefore my question is how can I have ps_filename like 'A%' in C?
Can anyone please help me to solve this issue?
Hope to get your co-operation.
Thanks & Regards,
Debabrata

debabratas wrote:
Therefore my question is how can I have ps_filename like 'A%' in C?Hello, why don't you just substring on the first character, and if that's an 'A', then LIKE 'A%' will also hold.
For example, in Pro*C:
if (substr(ps_filename,1,1) == 'A') {
..

I want scjp1.5 model questions......

i am preparing for SCJP1.5 which i should have to write before the end of this year.
i am reading Kathey sierra for that.
and i am testing myself by doing questions in Danchilosm and khalid moghal book.
one more thing is i have test killer also...
let me know the name of the sites from which we can get similar model questions in SCJP exam.
can you help me by sending response?

You can also try this website
http://www.javaranch.com/
This site was originally created by Kathy Sierra

SRM4.0 procurement cerification model questions

Hi All,
Could you please forward me SRM4.0 procurement cerification model questions and any helpful material regarding this.
Reward points are sure.
Thanks in advance.
Regards,
Murali

Hi,
Thanks for your immediate response.
My mail Id: [email protected]
Regards,
Murali

OCA DBA 1Mock exams&mODEL QUESTION PAPERS

Hi,
Iam preparing for OCA exam,anyone can help me by providing good model question papers.And also i need to test myself is there any mock exams.
If anyone helps me kindly appreciated.
Thanks,

Just a reminder:
"Oracle reserves the right to take action against any candidate involved in fraudulent activities, including, but not limited to, fraudulent use of vouchers, promotional codes, reselling exam discounts and vouchers, cheating on an exam, alteration of score reports, alteration of completion certificates, violation of exam retake policies or other activities deemed fraudulent by Oracle.
If Oracle determines, in its sole discretion, that fraudulent activity has taken place, it reserves the right to take action up to and including, but not limited to, decertification of a candidate's OCA, OCP and/or OCM credentials, temporary, indefinite or permanent ban of a candidate from Oracle certification programs, notification to a candidate's employer, and notification to law enforcement agencies. Candidates found committing fraudulent activities forfeit all fees previously paid to Oracle, or to Oracle's authorized vendors, and may be required to pay additional fees for services rendered."
Tom

Modeling Question... need a quick response.

Similar Messages

Maybe you are looking for