Modeling "Status" for transaction data in a cube

Hello all,
I saw this thread created sometime ago about putting status in a cube.
How to model Status filed
I would like model a status of transactions within a cube. One suggestion was to just create a CHAR characteristic of a certain length (I assume this would be in the E and F fact tables and not with the master data at all).
To me, this would mean that if the status changed, a whole new row would have to be loaded - and the old row removed? Would one use some kind of selective deletinon?
It seems that a navigational attribute would be best placed in the E/F fact tables.
Best Regards,
Casey

@kkc - thanks for the reply but I already knew about the E and F fact tables - I just did not know that compression takes care of the status field
@Wond - Above you said "Yes it will be a whole new record will be sitting in the cube, once the status changes the cube will have three records when doing compression the two will wipe out itself and you will remain with one."
So how does it decide which record stays around? By the loading date? Also, is there any good documentation out there that would say this?
Thanks a lot!
PS - I also found this thread but it speaks of the ODS and using 0RECODMODE (it does not say how to set this with the new BI 7.0 and the "Transformations"/"Data Transfer Processes")
Modeling "Status" for transaction data in a cube
Edited by: Casey Harris on Feb 29, 2008 11:28 AM

Similar Messages

Issue with CIF Integration model for Transaction data

Hi Gurus,
I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
Is there any way to avoid the following exercise as it is taking very long time for activation.
Please guide me as it is very urgent.
Thanks for help in advance...
Thanks & Regards,
Jagadeesh

I assume 1,60,000 location products are spread around different locations.
Rather than one Integration Model it is better to have multiple Integration Models.
For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
This way you reduce the number of Products in an Integration Model.
It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
But if you have country spefic or region specific Integration Model - only that country is affected not all.
In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
Hope this gives you some direction.
Somnath

ALE Configuration for Transactional Data (Purchase Order)

Dear Experts,
I want to configure ALE for Purchase Orders(Transactional Data).
For that:
I have done neccessary Condition Records at NACE with necessary Output Type Configuration. Configured Port and Partner Profile with Message Types: ORDERS and ORDECHG (as Outbound Parametrs) .Assigned those Message Types against defined Sender and the Receiver at Customer Distribution Model . Configured Port and Partner Profile at the Receiver System also.
Now I have 2 queries.
i) Is this much of ALE configuration is enough for Transactional Data for communication between 2 systems or I have to do something more?
ii) For Master Data we configure Change Pointer(we can see field assignments against Change Document Object at BD52 for Master Data Messaage Types) . Is it necessary to configure Change Pointer for Transactional Data or it will autometically handled by the system(field assignments cannot be seen against Change Document Objects at BD52 for Transactional Data Messaage Types)?
Regards
Arnab

Hi kumar,
what Alexander said is absolutely correct .
from your second question no master data distribution configuration is required for the transactional data distribution.
let us know once if you face any problems.
~linagnna

Import Transaction Data from BW Cube to BPC Cube

Hi,
Is there any document that explain how i can import/copy transactional data from bw cube to bpc cube like this below pic. http://img841.imageshack.us/img841/6998/prof.jpg
Thanks in advance.

Hi Again,
With these documents I can import transactional data with a single keyfigure but if there are more than one keyfigure, importing and assigning keyfigures to dimensions might get confusing.
For example i have two keyfigures "zbgstsad" and "zbgstsf" in bw cube and I have two account member in "S_ACCT": "S_F", "S_A". I did a conversion file with "zbgstsad(ext)->s_a(int)" and "zbgstsf(ext)->s_f(int)" rows. But i am not sure what i have to put instead of "?".
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
CONVERTAMOUNTWDIM=S_ACCT
*MAPPING
RPTCURRENCY=0CURRENCY
S_ENTITY=ZBGENTITY
S_ACCT= ?
S_TIME=0CALMONTH
S_CATEGORY=*NEWCOL(ACTUAL)
S_OB=0UNIT
S_URUNLER=ZBGURNLR
AMOUNT= ?
*CONVERSION
S_ACCT=[COMPANY]B_ACCT.XLS!CONVERSION
TIME=[COMPANY]B_TIME.XLS!CONVERSION
What do you recommend?
Thanks in advance.
Burak
Edited by: boguner on Aug 9, 2010 2:34 PM
Edited by: boguner on Aug 9, 2010 2:40 PM

Error occurs when loading transaction data from other cube

Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HH

Hi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL     INTERNAL
201101          2011.JAN
201102          2011.FEB
201103          2011.MAR
201104          2011.APR
201105          2011.MAY
201106          2011.JUN
201107          2011.JUL
201108          2011.AUG
201109          2011.SEP
201110          2011.OCT
201111          2011.NOV
201112          2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH

Idoc Serialization for Transactional data

Hi All,
1. Please let me know if you have done IDOC serialization for Transactional data.
If so please let me know the steps.
2. How do we use serialiazation using object types. If you have done this please let me know the steps for this too.
Thanks for your help.
Srikanth.

Hi Srikanth,
Follow the steps below to set up serialization using object types:
1.       In the SAP menu choose ® IDoc Interface/ALE ® Development ® BAPI ® Serialization ® Serialization Using Business Objects ® Determine Supported Business Objects (transaction BD105). Enter all the business object types relevant for serialization.
2.       In the SAP menu choose ® IDoc Interface/ALE ® Development ® BAPI ® Serialization ® Serialization Using Business Objects ® Assign Message Type to a Business Object (transaction BD104). Assign the message types relevant for serialization to each business object type.
3.       In Customizing (IMG) activate the serialized distribution in both the sending and receiving systems:
ALE Implementation Guide (transaction SALE)
Modeling and Implementing Business Processes
Master Data Distribution
Serialization for Sending and Receiving Data
Serialization Using Business Objects
Execute activities Activate Outbound Business Objects and Activate Inbound Business Objects. Set the Serialization flag for the required business object types.
If you want to do serialization by message type then
1. go to BD44 and create a serialization group and assign messages and the serial number to each.
2. Run the program RBDSER01.
Award points if useful,
Aleem.

Data Type field read only in Data source for transaction data (PC_FILE)

Hi folks,
I need to change Data Type for some of the fields in "Field" tab in data source for transactional data. It became read only after I activate the data source. Need help in making it editable. All fields now have Data type=CHAR.
Thanks

Nevermind folks. I got it.

CMOD exit_rsap_saplr_001 for transactional data ABAP CODE

Hi please confirm that you want to convey that i can write the actual code in CMOD exit_rsap_saplr_001 for transactional data?? if i put 20 data sources enhancement code in there is'nt that too bulky and will cause the failing all extractor if one code is wrong if you still suggest that i can go ahead with 20 similar codes as below . please see my code below which i have used for all 20 datasources with little modification
if you can recommend some changes in code to improve performance would be great
case i_datasource.
WHEN '0CUSTOMER_ATTR'.
loop at i_t_data into l_s_BIW_KNA1_S.
l_tabix = sy-tabix.
clear i_knvp.
select single * from KNVP into i_knvp where KUNNR = l_s_BIW_KNA1_S-KUNNR.
if sy-subrc = 0.
l_s_BIW_KNA1_S-ZZPARFN = i_knvp-PARVW.
l_s_BIW_KNA1_S-ZZCUSNOBP = i_knvp-KUNN2.
modify i_t_data from l_s_BIW_KNA1_S index l_tabix.
endif.
endloop.
endcase.
Thanks
Poonam

Check this simple code for Z...include into the FM EXIT_SAPLRSAP_001 where zcomp is new field added into the datasource 8zsales2.
data : l_s_/BIC/CE8ZSALES2 like /BIC/CE8ZSALES2,
l_tabix like sy-tabix.
case i_datasource.
when '8ZSALES2'.
loop at c_T_DATA into l_s_/BIC/CE8ZSALES2.
l_tabix = sy-tabix.
fill the new field
select comp_code from /BI0/MCOMP_CODE into l_s_/BIC/CE8ZSALES2-zcomp
where comp_code = '1000'.
if sy-subrc = 0.
*l_s_ZFIAA_IS001_TXT50 = ANLA_TXT50.
modify c_t_data from l_s_/BIC/CE8ZSALES2 index l_tabix.
endif.
endselect.
endloop.
endcase.
Edited by: Rohan Kumar on Jan 16, 2008 8:21 AM

Problem in data sources for transaction data through flat file

Hello Friends,
While creating the data sources for transaction data through flat file, I am getting the following error "Error 'The argument '1519,05' cannot be interpreted as anumber' while assigning character to application structure" Message no. RSDS016
If any one come across this issue, please provide me the solution.
Thanks in Advance.
Regards
Ravi

Hallo,
just for information.
I had the same problem.
Have changed the field type from CURR to DEC and have set external instead of internal.
Then, the import with flatfile worked fine.
Thank you.

Is there any Function Module will give the Transactional data of a cube?

Hi Experts,
I have one Infocube Zco3_BILT , I need to write a routine (BADI Program)on top of this info cube to fetch a characterstic value in the infocube.
F table & Etable wont give any characterstic values.
Is There any SAP provided FM to give characterstic values of the Infocube.
Thanks in advance.
Regards
Mohan

Hi Mohan,
this is correct since the values are stored in different tables (fact, dimension etc) due to star sheme modelling. As far as I know there is no standard function module for this issue.
However ABAP report RSDD_SHOW_ICUBE might help. This is the report for transaction listcube, all relevant data is build up, there you should find all necessary steps and standard reports/modules to fetch the required characteristic value. Although I do not know the exact requirement you will probably have to work with SID values.
Perhaps this will help resolving your issue.
Best Regards,
Marcel

How to call Attributes in the routine for transaction data

Dear Pros,
I have a condition that i have an additional Info object to be filled with a value such as
i have plant and material in the transaction data,
Distributional channal --> attribute of 0plant
Zmatentry --> attribute of 0material.
I WANT TO CALL DIST CHANNAL & ZMATENTRY IN RSDS TRANSFORMATION AND USE TO FILL ZCOMPINCH
code is similar to
if SOURCE_FIELDS-DISTR_CHAN eq '01'.
Zcompinch = fill with comp code
RESULT = SOURCE_FIELDS-COMP_CODE.
or Zcompinch = fill with Zmatentry from attribute of 0material
ELSE.
RESULT = SOURCE_FIELDS-/BIC/ZMATENTRY.
ENDIF.
THANK YOU

Hi,
DATA: BEGIN OF t_batch OCCURS 0,
     material LIKE /BIC/AZIC_O0600-material,
     plant LIKE /BIC/AZIC_O0600-plant,
     stor_loc LIKE /BIC/AZIC_O0600-stor_loc,
     batch LIKE /BIC/AZIC_O0600-batch.
      END OF t_batch.
SELECT MATERIAL PLANT STOR_LOC BATCH FROM /BIC/AZIC_O0600 INTO t_batch for all entries in DATA_PACKAGE
WHERE
material = DATA_PACKAGE-material and
plant    = DATA_PACKAGE-PLANT     and
stor_loc = DATA_PACKAGE-stor_loc.
ABORT = 0.
"This code is at field level routine.
SORT t_batch by material batch stor_loc.
Read table t_btach with key material = COMM_STRUCTURE-material
                            plant    = COMM_STRUCTURE-plant
                            stor_loc = COMM_STRUCTURE-stor_loc.
"In the above code I'm reading the data from t_btach table, t_btach is already filled based on DataPackage at Start Routine level.
"In my case it is working fine, so try it take ABAPer help.
If sy-subrc = 0.
RESULT = t_batch-PLANT.
else.
RESULT = ''.
endif.
ENDIF.
ENDLOOP.
Thanks
Reddy

RDA for Transactional Data Changes (But needs to load as Master Data to IO)

Hi,
I would like to use RDA to load Data changes into IO (Not for DSO).
I tried using this, i can able to load data into PSA. But, from PSA to IO, No datapackage is getting transfered. i.e. Transfered records = 0.
We considered several options i.e. remote cubes etc. We need to implement RDA.
Note: I have gone through the Documentation on RDA. Which SAP mentioned, RDA won't support for Master Data if we have aggregates. We don't have any Aggregates build on my cubes.
Thanks in advacne!!!
Nagesh Ganisetti.

RDA DTP is used for supplying data to the Data Store Objects but not to the Master data infoobjects...
Please follow the links to get to know more on this..
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
thanks
hope this helps..

Data is not available for Transaction Data Source 3EC_CS_1A,

0ECCS_C01 Transaction Data, Consolidation Technical Name: 0EC_CS_1
Based on DataSource: 3EC_CS1A
Thanks
Bhima
Message was edited by: Bhima Chandra Sekhar Guntla

Hi Bhima,
I have been working on this 3ES_CS_1A datasource for a while, still can't get it going even with the fiscal period input as instructed from your method below, I am wondering if I have missed anything else that are required as input. After entering the specific fiscal format then the "Errors occurred during the extraction
" error screen is prompted.
We are implementing BW 7.0, currently on SP09 with BI 7.0 content installed, I have generated all the datasources 3EC_CS_1, 3EC_CS_1A and R via T-Code "FCIWCU00 - Generate DataSources ".
Any help would be highly appreciated.
Cheers.

How to copy documents for InfoProvider data from one cube to another cube

Hello Everyone,
We are using standard document feature to store document/comment about the data shown in the report/planning query. Relevant characteristics have the property 'characteristics is document attrib' turned on/selected for this purpose.
Looks like the documents created gets tagged to a particular InfoProvider along with characteristic value assignment.
Is there a way to move or copy documents from one InfoProvider to another InfoProvider.
As per the design requirement, we need to move data from a real time InfoProvider (transaction cube) to a basic reporting cube. The data in the first/source cube stays for a period of approx 3 months before moved to other cube. We want the documents associated with InfoProvider data also to be moved, so that users can continue to see the document/comments what they had created earlier.
I looked at the Documents tab in DataWarehouse workbench. No options seem to be available to copy or move documents.
Any help will be highly appreciated and points will be rewarded accordingly!
Best regards,
Sanjeeb

Hi
Have you got any answer to this? I would also be interested in a copy function but more from one query ID to another.
Kind regards,
Daniel Müller

CRM Table for Transactional data

Hi experts,
I m looking for a Table in CRM where i'll get all the transaction related data(i.e.All partners, products, status, process types etc) like we have FM CRM_ORDER_READ from this we can get all the tranaction related data.
Thanks to you !!!!
Vivian

Vivan,
The answers above are correct, CRM does not store all the data in one table like ERP. As far as the factsheet the data is stored across several different areas. So you need to tell us what part of the factsheet data you are looking for and you might get an answer.
In the future please do a search before asking, or make sure your question is more detailed as your original question was too broad for anyone to provide a reasonable answer.
Thank you,
Stephen

Modeling "Status" for transaction data in a cube

Similar Messages

Maybe you are looking for