Modem Firmware version

3G iPad 64Gb
Modem firmware 06.15.00
Which iPad do you have and what version modem version do you have?
Problem: sporadic wifi drops and reconnects

Based on the wording in Apples statement, I think it's software.
It's posted somewhere. I'll look...
Frank posted a clip of it here,
http://discussions.apple.com/thread.jspa?threadID=2424629&tstart=0
Message was edited by: red555

Similar Messages

  • IPhone modem firmware version.

    Dear All,
    I'm Bipul. I've question to all of you as mentioned below.
    "If iPhone modem version (baseband) can upgrade then why can't downgrade?"
    Best Regards
    Bipul

    Please describe your "wifi connectivity issues" in detail so that we may try to help.

  • I have a WRT54G Wireless modem with firmware version 1.02...

    I have a WRT54G Wireless modem with firmware version 1.02.1 Mar 4 2003. i down loaded the latest firmware for the modem but i can't install it. I get the erroe message"incorrect image file".
    What is wrong?

    Which version of the WRT54G do you have?  If it is not clearly stated on the router, go to Wikipedia.org and search for WRT54G, then you can use your router's serial number to determine which version of the router you own.
    The version of the router is important.  Each version has a different set of hardware in it, so each version takes a different firmware.
    You can only load the firmware that corresponds to your model and version.

  • Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help

    Using iPhone 3G ,Version 4.2.1,Modem Firmware 06.15.00, In this phone i was using Facebook upgraded app and Smart Sync App. Suddenly my sisiter reset all setings and now I can't use the upgraded facebook app, for smart sync is asking for IOS 4.3,Need help.

    Thank you for the answers so far, but I'll make one correction: I said earlier that the Boston Globe website, boston.com, does not have a mobile site, and I would need to visit their regular website on my iPhone. Actually, I just found out that boston.com has a mobile site, so I'd obviously use that instead of the regular site. By doing that, I'd save a ton of data (I think). Does that change your answers?

  • TS1559 I believe it my have something to do with my modem firmware , I have a iphone 4 and no problems but i changed the sim card in my 4s and the firmware seems to be an older version could that be a problem

    I have a 4-s and a 4 I changed the sim card in my 4-s and now my wifi is not working, grayed out in fact, I also noticed that the modem frimware was an older version now on the 4-s than the 4, HELP

    The modem firmware has nothing to do with the SIM card or WiFi.  Was your 4S EVER jailbroken?,  See this reguarding grayed out WiFi setting:
    iOS: Wi-Fi settings grayed out or dim

  • Problem with restore.I have a 2 gen running firmware version 4.2.1

    Hello there !
    Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
    Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
    I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
    Thank you tons for the help !
    @Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
    Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
    System manufacturer System Product Name
    iTunes 10.3.1.55
    QuickTime 7.6.9
    FairPlay 1.11.17
    Apple Application Support 1.5.2
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.1.2
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 2.0.5.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 00AAB2F80F513CD0
    Current user is an administrator.
    The current local date and time is 2011-07-17 18:45:37.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA GeForce 9500 GT
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
    Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
    IP Address:     192.168.2.10
    Subnet Mask:     255.255.255.0
    Default Gateway:     192.168.2.1
    DHCP Enabled:     Yes
    DHCP Server:     192.168.2.1
    Lease Obtained:     Sun Jul 17 17:51:16 2011
    Lease Expires:     Wed Jul 20 17:51:16 2011
    DNS Servers:     192.168.2.1
    Active Connection:     Connexion réseau
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    SSL 3.0 Support:     Enabled
    TLS 1.0 Support:     Enabled
    Firewall Information
    Windows Firewall is off.
    ZoneAlarm Firewall is installed.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was unsuccessful.
    The network connection timed out.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2011-07-17 18:43:19.
    **** Device Connectivity Tests ****
    iPodService 10.3.1.55 (x64) is currently running.
    iTunesHelper 10.3.1.55 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Contrôleur d'hôte ouvert PCI vers USB NEC.  Device is working properly.
    Contrôleur hôte PCI vers USB standard étendu.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB.  Device is working properly.
    Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod touch (2nd generation) running firmware version 4.2.1
    Serial Number:     9E01226F201
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

  • Cisco Modem Firmware (HWIC) upgrade Process

    HI experts, 
    I need to upgrade firmware of my LTE ( Hwic) module for the router 2901. I am wondering if this is the part of IOS upgrade process , I mean ones I upgrade IOS to the latest version will it upgrade my modem firmware by own or I need to upgrade LTE modem separately?
    can you guys please share your experience here?
    any docs on this please?
    Thanks!

    Hi,
    The LTE module is part of main Cisco IOS you load into the router.  Once you upgrade the IOS, it also applies to the module.
    ntegrated 4G LTE WWAN broadband: With the 4G LTE WWAN modem integrated into the router, you gain the benefits of simplified installation and management. In addition, the Cisco 4G LTE WWAN EHWICs are tightly integrated with Cisco ISRs, which run the industry-leading Cisco IOS® Software, giving access to all the advanced features of Cisco IOS Software such as quality of service (QoS), intelligent network queuing, and robust security.
    Link:
    http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/4g-lte-wireless-wan-enhanced-high-speed-wan-interface-card/datasheet_c78-710314.html
    HTH

  • SRP 527w Firmware version 1.01.17

    I have a “fleet” of SRP 527w modems, and all but one are running Firmware version 1.01.17.  The one black seep is running 1.01.9 Firmware.  I had some difficulty configuring the one with 1.01.9, as it was refusing to accept new /admin/config.xml files when initiated as a push from “curl”.  It would though accept configuration if update was initiated in other ways.
    I would prefer all modems in the Fleet to be running the same Firmware
    Is version 1.01.17 Firmware available?

    Hi Andy.
         Thanks for the reply.
    I had already visited the download centre and downloaded version 1.01.19, but 1.01.17 does not seem to be available there.
    My preference would be to use 1.01.17 to keep the fleet consistent (without needing to reflash the lot, half of which are already on site).
    If version 1.01.17 is not available could you please advise if there are any foreseeable problems if a http://192.168.15.1/admin/config.xml file taken from a 1.01.17 is then used to configure a unit with 1.01.19 version of the Firmware.
    Best regards,
         Chris Gibson

  • IPhone 4 (not S) - iOS 7 - Modem Firmware will not update

    I updated my iphone 4 from ios 5.1.1 to ios 7.0.2 today mainly to update my modem firmware since my connectivity is very poor.
    I read online that updating should help, but the firmware is still at 3.0.04 not at 4.12.09 that wikipedia shows it should have updated to.
    My phone is not jailbroken and I updated to ios 7 with itunes. What gives?
    My phone model is MD146LL/A and itunes installed ios version 7.0.2 (11A501)
    Thanks for any insight.

    Hi clarkfus,
    Thanks for visiting Apple Support Communities.
    Since this behavior is affecting multiple devices, I recommend first troubleshooting iTunes on your computer(s) using the article(s) below:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best Regards,
    Jeremy

  • After WRT310N Firmware Version 2 update - Unidentified Network

    Hi
    I've owned the WRT310N for over 2 years now. I've been happy with it's features thus far. I updated the firmware previously to 1.0.9.
    Recently, I upgraded my OS to Windows 7 from Vista. It's great and connects to my other hardwired network device (i.e. printer) and internet without any issues. I chanced upon a review that said the WRT310N Firmware Version 2 (WRT310Nv2_0_00_012.bin) was out and eagerly upgraded it in the router. Herein came the problem after the automatic reboot. My internet connection was unidentified with gibberish for an IP address. Strangely, my printer still connects and prints. But I can no longer access the set up page typically found in 192.168.1.1. There are no issues with my modem.
    I tried many things with the assistance of the Linksys hotline in the Philippines (ref case:100408-000629). Simple 5 seconds, 30 seconds, 1 min resets, press and hold, unplug power, replug in power - Result = 0.
    I tried to force ipconfig to dump the ip address, it could not release it or renew it. I tried to lower the duplex speed to 10MBPS, doesn't work. I thought the problem was the gibberish was on IPv6, by deselecting it, IPv4 wasn't able to correct itself.
    Long story short, it was a fatal mistake to install Firmware Version 2 as after the reboot, I couldn't access the internet or the set up page that was necessary to reset the factory defaults. Without entering the router set up page, I can't help myself.
    The kind Linksys lady told me I'm out of warranty and there's pretty much nothing I can do except by the brand new WRT610n with XXXXX features. I don't think I would as I'm very concerned about upgrading future firmwares in the light of this experience. So I'm putting this case up for your review. Hopefully, I'm the only "unique" case. =(
    E

    Push and hold untill lights go off usually I hold for 30 seconds. You should also turn off and unplug your modem while you do this. After doing that you should reboot your computer and then see if you can access the router, if you can but still dont have internet then you might have to release/renew the DHCP untill you get an IP. Can find that on the status tab.

  • C887VA modem firmware via SNMP

    The dutch isp KPN started to enroll VDSL vectoring, the problem is that several dsl-modem firmwares, embedded in the ios, don't support vectoring.
    In the best case this means the line will train in on ADSL instead of VDSL but there are also a couple of firmware versions which are blacklisted and then the router will no longer establish a connection at all, so not via VDSL and not via ADSL.
    I'm trying to use snmp to read-out the current firmware-version of the dsl-modem in the 700+ cisco 887va(g) routers we manage, but I can't find the oid.  Does anyone know if this oid exists and if so, what the oid is...?

    I'd like to use my own script to do the upgrades. Which would be easy to do with SNMP if I new the right OIDs to set...
    Don't have WLSE or CiscoWorks RME.

  • Downloaded new firmware version. .bin file?

    The firmware version i downloaded is in a .bin file.  My computer does not recognize it.  Anywhere I can go to download a program to read such files?
    Thanks

    The computer doesn't have to know how to open it, the router does. Bin is sort for binary and I think is raw data. I don't know what format linksys uses, but when I updated my modem/router firmware the file had bin extension. Just read the instructions on how to update the firmware. 

  • Does restoring iPhone to existing OS 4.3.3 upgrades modem firmware as well?

    Does restoring iPhone to existing OS 4.3.3 upgrades modem firmware as well?

    Those options don't exist for the iPhone. You can only restore to the most recent version (without doing some acrobatics outside of iTunes).
    But the overwhelming majority of iPhone users have no problems with 3.0, and the few that do can almost always fix it. But the ones who can't are naturally (and justifiably) quite vocal.

  • I have no modem firmware iPhone absorption disappeared

    Hi
    I have a problem iPhone 5s. His version 8.1(12b411) of the problem is I have gone absorption device search and found impression absorption disappears modem firmware also has a version I installed it but it does not help I do not know what to do please help

    My impression iPhone Search does not find modem firmware intake and my problem is gone it can help me please

  • IPhone 4 does not show IMEI nor modem firmware

    Hello everyone,
    I've got an iPhone 4 from a friend. The phone does not show the IMEI nor any modem/baseband firmware version.
    He plugged it off during the update process.
    I wanted to restore it with iTunes, but this does not help.
    Is there any possibility to recover it or install a complete new iOS 6.1.2 on it and have 3G and WiFi running?
    iTunes says, the phone is broken.
    There was no jailbreak installed.
    Thanks in advance.
    Kind regards,
    Kev

    If it won't show an IMEI or a baseband firmware version, there's probably a hardware problem. You'll most likely need to take or send it to Apple to be replaced.
    Regards.

Maybe you are looking for