Modem Mode

My blackberry Q5 is unable to activate Modem mode. I have done every thing. Is there somebody who can help me?
Thanks and Happy new Year
Jean-yves

Modem mode?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Modem mode for a Hub 5?

After years on Virgin Media where I used an ASUS router alongside a Virgin cable modem, I now find myself having moved house stuck on BT Infinity. So far, 2 weeks in, the service (both internet and customer service) is staggeringly awful.
As well the and lies from customer service and the terrible internet speeds, another issue has arisen. The home hub 5 seems incapable of sustaining 5ghz connections. I have a bunch of 5ghz devices, mostly Apple stuff, but also a Samsung Smart TV. All of them will suffer massive slow downs on 5ghz to various degrees, and some will eventuallly get cut off from getting any data at all. They still think they're connected, but data will have stopped and will never start again, unless I disconnect then reconnect them.
I've talked to BT about this of course, and even got a replacement hub, but the problems persist. All of these devices worked flawlessly on my old ASUS router on 5ghz. I could use 2.4ghz of course, and I have to do just that as the 5ghz is so broken, but speeds are around half that of 5ghz. (which were not exactly impressive to begin with)
Is it possible to stick the hub 5 in a dumb modem only mode, to essentially make it like a Virgin Media cable modem? Then I could get a real wifi router, one which actually knows how to put out a 5ghz signal, and rely on that instead.
Being with BT is like going back in time by about 10 years. It's amazing how a company so big could offer a service so comprehensively terrible.

The closest you can get to modem mode with the HH5 is to put the new router into the DMZ on the HH5 and maybe turn off wifi, uPNP and the firewall on the HH5 too.
Alternatively, there are various things you can do with the HH5 to try and fix the wifi - turn off smart setup, split the 2.4 and 5 Ghz bands using different SSIDs, select your own channel instead of Automatic, change the Wireless Interface type to the highest speed.
If you found this post helpful, please click on the star on the left
If not, I'll try again

[HELP] Asha 210 - GSM Modem Mode

Dear all,
In Win7 (a newly installed win7), after installing "Nokia_Connectivity_Cable_Driver", I am able to see the Nokia Asha 210 appears as a com port.
I connect to that com port using HyperTrm.exe (copied from WinXp). Connect using 9600 8N1.
When I type "AT&V" The terminal just hang for approximately 30sec to 1min before return, and shows no results.
May I know what I can do to enable this modem mode again?
It used to work before this.
TIA.
Kwan

I found the issue.
In Device Manager it shows that Asha 210 is connected to COM3, but it actual fact I can only get response from COM4.
Something wrong with the Asha driver.

Time Capsule & Netgear DG834GT in Modem Mode - Not working

I've just taken delivery of a 1TB Time Capsule. I've switched my existing Netgear DG384GT modem/router into modem only mode, so routing functionality is disabled. I just want to use the DG834GT as a simple ADSL modem, whilst utilising the features (DHCP, wireless etc) of the TC.
I've connected the two together, but I can't get a green light on the TC. The DG834GT definitely has an internet connection. I have the TC set to "Share a public IP address", but it doesn't appear to be able to get an ip address from the DG834GT. TCP/IP is set to use DHCP. I've tried everything, without success.
The only way I've managed to get the working together is by re-enabling DHCP and NAT in the DG834GT, and setting the TC to use bridge mode. This is not what I want to do, as my aging DG384GT has problems when too many wireless devices try to connect.
Am I missing something? How can I get the TC to obtain the ip address from the DG834GT? I don't want to have to buy an ADSL modem unless I really need to.
Help!
Thanks in advance
Message was edited by: LBowers

Welcome to the discussions!
Can you clarify if you have DSL service there? In other words, when you first setup the Netgear to connect to your service, did you enter your user name and password into the device to connect to the internet?

IOS 8 bluetooth and modem mode?

Hello,
I have installed iOS 8 on my iPhone 5s and on my iPad 4. Firstly there is no more modem functions in the phone. Secondly there is no connection through iPhone and iPad. Tell me please somebody, what to do and will everything in the near future repairs?
Thanks!

similar problem- since upgrading to iPhone 6 I can't connect with my JBL Charge speaker- the phone searches but can't seem to find it. I was able to pair the phone with my car. I've tried resetting the network setting, turning off and on the bluetooth button. Any other suggestions?

Put the modem in modem or router mode?

Hi,
Connecting an airport express via an ethernet cable to a Netgear DG632 unit.
This has the option of acting like a router or as a basic adsl modem. Which should I choose? Better to let the AE unit take care of the DHCP etc. ?
Look forward to your thoughts,
Ben

If you can only connect one computer at a time, then likely your DG632 is already in "modem mode".
That being the case, cable the Airport Express to the ethernet LAN port on the DG632. Make sure the Airport Express's router is enabled - in the Airport Admin Utility, the box should be checked next to "Distribute IP addresses" and "Share a single IP address using DHCP and NAT".
By the way - what were you referring to when you said "main airport (there is many)"?

Somewhat Frightening Message after Changing Modem / Router Hardware

Yesterday, I changed my DSL Modem/Router to be a DSL Modem only, and added a different router by using its WAN port.
This essentially shut off control of the original modem/router, and moved it to the new router.
Now, we have 4 computers connected via ethernet cables, and none on Wireless. All are turned off, except my partner's Windows XP machine, which, suddenly today has a new message at the bottom left of his Login Window:
(Red Button) "Turn off Bills Modem Mods"
Who/Where did this come from? My computer's name is "Bill Lastname" ...
All computers are set to use TCP/IP Using Automatic DCHP selection of local IP Address and other parameters.
Some kind of Hacker prank, or am I just having a little paranoia attack? All other computers are Macs running OS X.
Mac Plus, Performa 6116, PPC 8500 G4/450, 9500 G3/500, QS 2@1GHz Mac OS X (10.3.9)

Not being a Windows user, I didn't realize I had inadvertantly input "Bills Modem Mods" to create a new account on the HP ... testing the new modem/router setup ... so that's why it started to appear as an option at the bottom of his signin window ...
Silly me ... didn't remember doing this ... so it startled me to think someone was hacking my partners computer ...
PTSD and Halloween approaching ...
Mac Plus, Performa 6116, PPC 8500 G4/450, 9500 G3/500, QS 2@1GHz Mac OS X (10.3.9)

[SOLVED] netctl profile auto-start/stop on Huawei modem plug-in/out

Hello!
I have Huawei 3G USB modem.
$ lsusb | grep -i huawei
Bus 004 Device 007: ID 12d1:1436 Huawei Technologies Co., Ltd. E173 3G Modem (modem-mode)
I am trying to make netctl to auto-switch to internet connection via this modem as soon as I plug it in.
Following Arch Wiki, I made internet via wvdial working fine:
$ sudo wvdial kymp
--> WvDial: Internet dialer version 1.61
--> Initializing modem.
--> Sending: ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet.kymp.net"
AT+CGDCONT=1,"IP","internet.kymp.net"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Tue Aug 6 22:52:11 2013
--> Pid of pppd: 2087
--> Using interface ppp0
--> local IP address <...>
--> remote IP address <...>
--> primary DNS address <...>
--> secondary DNS address <...>
Next, I tried to setup netctl profile for this modem, but my netctl mobile_ppp profile is NOT working:
$ cat /etc/netctl/ttyUSB0-kymp | nocomment
Description='Kymp internet connection'
Interface=ttyUSB0
Connection=mobile_ppp
PPPDebug=true
AccessPointName=internet.kymp.net
Mode=3Gpref
...with following log info:
$ sudo journalctl -b | grep pppd | grep 2387
pppd 2.4.5 started by root, uid 0
Script /usr/sbin/chat -v -t15 -f /run/network/mobile_ppp.ttyUSB0.ttyUSB0-kymp/modem.chat finished (pid 2389), status = 0x0
Serial connection established.
using channel 8
Using interface ppp0
Connect: ppp0 <--> /dev/ttyUSB0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xbe5c7839> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x11 <asyncmap 0x0> <auth chap MD5> <magic 0x167ecad> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x11 <auth chap MD5>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xbe5c7839> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x12 <asyncmap 0x0> <magic 0x167ecad> <pcomp> <accomp>]
sent [LCP ConfAck id=0x12 <asyncmap 0x0> <magic 0x167ecad> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0xbe5c7839]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <addr 192.168.1.15> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]
rcvd [LCP DiscReq id=0x13 magic=0x167ecad]
rcvd [LCP EchoRep id=0x0 magic=0x167ecad be 5c 78 39]
rcvd [LCP ProtRej id=0x14 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x2 <addr 192.168.1.15> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
rcvd [IPCP ConfNak id=0x2 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x3 <addr 192.168.1.15> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
rcvd [IPCP ConfNak id=0x3 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x4 <addr 192.168.1.15> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
rcvd [IPCP ConfNak id=0x4 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x5 <addr 192.168.1.15> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
rcvd [IPCP ConfNak id=0x5 <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
sent [IPCP ConfReq id=0x6 <addr 192.168.1.15> <ms-dns1 10.11.12.13> <ms-dns2 10.11.12.14> <ms-wins 10.11.12.13> <ms-wins 10.11.12.14>]
Hangup (SIGHUP)
Modem hangup
Connection terminated.
Exit.
Seems like something is wrong in netctl profile and I need to teach netctl to use wvdial instead of whatever-it-uses-now for mobile_ppp connection.
So the question is: "Is this possible to make netctl profile based on wvdial connection? Or is this possible to fix abovr netctl mobile_ppp profile?"
Any help is appreciated! Thank you!
Last edited by studentik (2013-08-09 04:33:18)

studentik wrote:Managed to solve above problem by adding "noipdefault" parameter to pppd config lines in /usr/lib/network/connections/mobile_ppp
Thanks for sharing this bit of information. This solved the issue for me. But before fixing this, I also had to change the file at another position: I had to escape the quotes around the IP in the connect string setting the APN, so that it now looks like this:
${AccessPointName:+'OK-AT-OK' 'AT+CGDCONT=1,\"IP\",$(quote_word "$AccessPointName")'}
Without this change, I was getting errors like this:
May 04 10:25:26 bppi chat[2105]: send (AT+CGDCONT=1,IP,"web.vodafone.de"^M)
May 04 10:25:27 bppi chat[2105]: expect (OK)
May 04 10:25:27 bppi chat[2105]: ^M
May 04 10:25:27 bppi chat[2105]: AT+CGDCONT=1,IP,"web.vodafone.de"^M^M
May 04 10:25:27 bppi chat[2105]: ERROR^M
May 04 10:25:30 bppi pppd[2103]: Connect script failed

Using an X-Modem M3 with an Airport Extreme and having iChat video problems

Hi,
I have been posting on the iChat section over the last week or so regarding a big problem I have with iChat4 Video. I have been getting some great help over there, but it has been mentioned to me that I may be able to pick up some help in this Topic regarding any more detailed known issues on the X-modem M3 or Airport Extreme.
I am still very new to this Discussion board use, so I hope it's ok to jump in like this and post a link to my ongoing discussion in iChat. See below.....
http://discussions.apple.com/thread.jspa?threadID=1323485&tstart=0
I didn't want to copy all of my message again into here as I thought it best that if you can help you could use the link.
If anyone can help throw some light on this, then many thanks.

The X-Modem in the default modem mode has no influence over the data being transferred. It is a modem not a router so it does not block any communication ports. Your iChat problems must be either on the Airport or the computer.
Seeing as how iChat works fine when the modem is connected to the computer via Ethernet it shows that the modem is working fine and that your ISP doesn't seem to be doing any blocking that would prevent iChat from working.
It really looks like the Airport Extreme is the culprit, perhaps the firewall on the computer is not properly allowing iChat to tell the Airport what ports it should open. Have you tried switching the firewall off completely at both ends ? Seeing as how the computers are behind Airports there is no need to worry about turning the firewall off for testing.

Using C7 as USB-modem under Windows 8.1 - connecti...

Hello there,
my girl-friend used her C7-00 as a wifi-tethering device until recently when she got her new computer that came with Windows 8.1.
Because 8.1 does not support WEP-Hotspot, I decided to hook up the phone using USB-cable and Nokia Suite. The connection goes alright, and she can surf through her C7 for a while, but then after 2 minutes approximately Nokia Suite says the connection has been dropped. This happens every time. Internet works perfectly on the phone.
Tried solutions: restarting phone, updating software, switching USB-modem mode, checking access-point configuration in Nokia Suite
Can anyone offer a suggestion on how to make this work ? Otherwise we will have to buy a new smartphone :-(.

Hi, sennerin.
Welcome to Nokia Support Discussions Forum!
Regarding your concern, Nokia Suite is not compatible with PC which runs Windows 8.1 OS. You can check the compatible Operating System of PC for Nokia Suite here: Nokia Suite. That is the reason why the connection is not that stable when using the phone as an internet modem.

Use N8 as modem ?

Hi.
When USB-connected in OVI Suite mode, I can see the "Nokia USB modem" in the Device Manager in my Windows XP (and Windows 7 on another PC).
But, as soon I change to modem-mode (Connect PC t Internet) it dissapears from the Device Manager.
So, I can't use it as a modem in my software (PC anywhere). In Ovi suite mode PC AW can't connect to another device and if I change to Modem mode, of course PC AW says "thera are no modems".
What to do ?
Thanks.
//Tarzzz99

If you reset your device or use *#7370#, then connect to net option of USB cable does not work. the partition where modem drivers were installed in the Phone is gone after hard reset.
I have tried so many things to restore from backups I have kept before resetting, but it doesnot work.
SpecK73 wrote:
The N8 is extremely flexible when it comes to using it as a modem.
You can connect it to Ovi Suite with the N8's USB connection in 'Nokia Ovi Suite' mode and then use the Ovi Suite software to connect the PC to the internet via your 3G provider.
Alternatively you can put the N8's USB into 'Conn. PC to net' mode and then the phone appears to talk directly with Windows to arrange a connection that does not require Ovi Suite to be running. This is the mode which I use most of the time and it works extremely well. I like it because it does not require any software to be preloaded on the PC you're trying to connect to the Net.
You can also tether the phone with the Windows OS directly using Bluetooth and operate it as a Bluetooth modem.
You can create a Bluetooth connection with Ovi Suite and have the software sort it out in the same way it does with the USB cable. That works nicely and mean you don't need to have your cable handy.
You can run the stupidly named but very impressive JoikuSpot software that connects to your 3G Internet and creates a Wifi hotspot that other devices can use. Be aware that the free version of this software does not feature any security. Within moments of creating one of these Wifi hotspots in my hotel room I had some hideous Apple devices leaching off it. I think I might buy the full version because it's really very good.
So there you are. Many options. I doubt any other device can better them. I trust that you'll find one that meet your needs.

Cannot use my Q10 as a modem for my pc

Hi, need some help here.... I have follow all the step but when I try to activate the modem mode, nothing happen.... It try to connect, but after few second it just stop. I have no network problem (I am able to connect to internet with my bb), but cannot share with my computer...... Help please.
Seb

Hi and Welcome to the Community!
Typically, that means that you have not activated, from your carrier (Bell), the service for this. I found an easier test was to, rather than trying the Modem method, to activate the HotSpot function on my device...if my data plan from my carrier is inadequate, I am directed to a page instructing me so.
I'd recommend you ring up Bell and inquire with them about if your service plan allows this function...and then decide how to proceed from there.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to use nokia x7-00 as modem?

connecting to pc vis modem mode. After, i install on touch accsees, phone switches to ovi mode and it doesnt connect my pc to intrnet via phone. Also i want to know is it possible to connect my pc to internet via x7-00 using wifi.

X7 as MODEM
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Does the Airport express base station connect to any modem?

ive got the apple tv in the lounge room where there is poor wi-fi reception and am wondering wether i should get the airport express or get a new modem. what can the airport express do that the extreme cant, and can the express connect to any modem? I have a NETGEAR modem.

By modem, do you mean just a dumb modem or modem router?
If you mean the modem, yes.
If you mean a modem router, yes, but only as an access point, not as a router (unless the Netgear supports modem mode).

Z2 can't enable modem

Hi All,
Is there any possibility to control LTE modem by AT commands? If yes how i do that?
I trying to do that several days but still no solution, tehering gives only RNDIS interface but i need modem.
Here is some info:
Model number: D6503
Android version: 4.4.2
Baseband version: 8974-AAAAANPZQ-00005-08
Kernel version 3.4.0-perf-gb772cca
BuildUser@BuildHost#1
Mon Apr 28 09:33:59 2014
Build number: 17.1.1.A.0.402 .
I have one more Z2 that can be connected like a modem, it has
Android version 4.3
Kernel version 3.4.0-ga806738
BuildUser@BuildHost#1
Fri Nov 22 17:21:05 2013
Build number 17.0.A.0.256
How do I enable modem mode on a newer firmware?
Thank you.

BUMP

Modem Mode

Similar Messages

Maybe you are looking for