Modem of A200_10X fails to connect via dial up

The notebook was bought in Kingdom Of Saudi Arabia and is being used in India.
The modem does not support dial up connections.

Hi
I think you can not use the modem dial up connection because you are in another country.
Please remove or configure again the Modem region select utility.
This can be found under Programs -> Toshiba -> Networking -> Modem region select
greetings from germany ;)

Similar Messages

Internal modem failing to connect via dial-up

I'm new to posting questions. Every time I try to connect using dial-up I get the message failed to detect dial tone. I tried to connect in different buildings and using new phone line (wire?) with no success. Tonight I created a new location in network preferences, tried and failed. Created a new user as a test, tried and failed. I cannot try in another building for a day or so. Anybody able to help? Thanks.

Hi Again starlite!
I hope you're feeling better.
Have you ever been able to connect with the PowerBook?
I don't know about your PowerBook, but on my iMac, the Modem port & the Ethernet port look very similar. Make sure you haven't inadvertently plugged into the Ethernet port.
Below is how I set my Network Preferences, using AOL. I don't know if the same configuration will work for you, but it may help to compare how yours are set. What ISP are you using? I'm guessing that you're on campus.
If you have any questions, please ask them before preceeding.
First, be sure you know what version of Modem you are using.
Disconnect from the Internet.
Navigate to:
HD > USERS > YOUR HOME > LIBRARY > PREFERENCES
If present, move to Trash:
com.apple.internetpref.plist (a file)
com.apple.internetconnect.plist (a file)
com.apple.internetconfig.plist (a file)
Don't empty the Trash just yet.
Before you change the settings below, you might want to make notes, or take screen shots of your present configurations.
Then, open System Preferences > Network
Location: Select "Automatic"
Show: Select "Internal Modem"
On the PPP screen, click PPP Options. UNCHECK ALL options
On the TCP/IP screen, Configure using IPv4: Select "Using PPP"
On the Modem screen, Select your modem from the list. I'm using an iMac (Summer 2001), and I have "Apple Internal 56K Modem (v.90)" selected.
Check "Enable error correction and compression in modem"
"Wait for dial tone before dialing"
"Dialing": Tone
"Sound": On
"Show modem status in menubar" (This isn't necessary, I just like to keep track of it)
Also select your Country.
Then, still in "Network" preferences,
Location: "Automatic"
Show: "Network Port Configurations"
Make sure "Internal Modem" is checked and at the top of the window.
Click "Apply Now" at the bottom of the screen.
Quit System Preferences.
Sometimes changing the access number that you use will also help. Do you know how to do that?
Good Luck!
ali b

OIM Database Applications Table fails to connect via GTC - Weblogic, Linux

Environment:
OIM - 9100 (public download)
Red Hat Linux
XLADM Oracle 10g
Weblogic 8.1 SP6 - no cluster
I have installed the Database Application Connector and am trying to configure it via the Generic Technology Connector, but it keeps failing to connect. I know those parameters are correct and have validated via sqlplus \ SQLDeveloper. Also its the exact same database (not SID) that is hosting XLADM as well, so I know it can find the machine and such. I had another previous OIM on JBoss install locally on my Windows workstation that worked fine too. I can see in the log that the DBProvisioningTransportProvider is getting the props fine and then blows up when trying to connect. I have tried even updating the ojdb14.jar drivers in XELLERATE_HOME/ext and that doesn't matter. I'm sure it's something simple, environment related, or a bug. Any help is appreciated.
DEBUG,16 Oct 2008 09:07:44,735,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName......
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],getProviderClassName--->
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider...providerName = DBProvisioningFormat
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......1
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......2
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......6
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName.....found provider.
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.prov.DBProvisioningFormatProvider
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameDBProvisioningFormat
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, listnull
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{DB_LOAD_DRIVER_CLASS_ERROR=The target database JDBC driver class cannot be loaded}
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.prov.DBProvisioningFormatProvider
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName......
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],getProviderClassName--->
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider...providerName = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......3
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = WebServices
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider providername = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,736,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider providername = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provTransportprovider name = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider. .provider = provTransportprovider name = DBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProvider......6
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName.....found provider.
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName....provider class name = ..com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider nameDBProvisioningTransport
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider def attribnull
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider parm, list[name: driver, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, name: url, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, name: username, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, name: password, datatype: String, encrypted: true, type: Runtime.
validValueList is following
, name: connectionProp, datatype: String, encrypted: false, type: Runtime.
validValueList is following
, name: parentContainerName, datatype: String, encrypted: false, type: Design.
validValueList is following
, name: childContainerTableNames, datatype: String, encrypted: false, type: Design.
validValueList is following
, name: parentContainerUniqueKey, datatype: String, encrypted: false, type: Design.
validValueList is following
, name: statusField, datatype: String, encrypted: false, type: Design.
validValueList is following
, name: statusLookupCode, datatype: String, encrypted: false, type: Design.
validValueList is following
, name: dbDateFormat, datatype: String, encrypted: false, type: Design.
validValueList is following
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION], provider resp codes{DB_GET_METADATA_ERROR=The target database schema detection failed, DB_UPDATE_CHILDRECORD_ERROR=A database error was encountered during a row update in a child table, DB_COL_DETECTION_ERROR=The column information of the database table cannot be detected, DB_UPDATE_EMPTY_RECORD_ERROR=Empty record cannot be updated. Please ensure to run reconciliation task to bring the systems in sync., DB_OP_NOTSUPPORTED=This operation is currently not supported, DB_TYPE_DETECTION_ERROR=The type of the database column cannot be detected, DB_LOAD_DRIVER_CLASS_ERROR=The target database JDBC driver class cannot be loaded, DB_FK_DETECTION_ERROR=The foreign keys of the database table cannot be detected, DB_CREATE_CHILDRECORD_ERROR=A database error was encountered when inserting data into a child table, DB_UPDATE_PARENTRECORD_ERROR=A database error was encountered during a row update in a parent table, DB_DELETE_EMPTY_RECORD_ERROR=Empty record cannot be deleted. Please ensure to run reconciliation task to bring the systems in sync., DB_CREATE_PARENTRECORD_ERROR=A database error was encountered when inserting data into a parent table, DB_CHILD_FK_ERROR=The child table does not have foreign keys that reference to the parent table, DB_ROWCOUNT_ERROR=A database error was encountered when retrieving the row count from a resultset, DB_DELETE_RECORD_ERROR=A database error was encountered when deleting data from a parent table, DB_DELETE_CHILDRECORD_ERROR=A database error was encountered when deleting data from a child table, DB_PK_DETECTION_ERROR=The primary keys of the database table cannot be detected, DB_PK_UPDATE_ERROR=The process form key field update is not supported}
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.GC.PROVIDERREGISTRATION],inside getProviderClassName. ..found transformation provider.....com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader entered.
DEBUG,16 Oct 2008 09:07:44,737,[XELLERATE.ADAPTERS],Class/Method: tcADPClassLoader/getClassLoader left.
DEBUG,16 Oct 2008 09:07:44,737,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize entered.
DEBUG,16 Oct 2008 09:07:44,737,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: driver - Value: oracle.jdbc.driver.OracleDriver
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: url - Value: jdbc:oracle:thin:MyIP:1521:MySID
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: username - Value: my_user
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: password - Value: *******
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerName - Value: MY_USER_TABLE
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist entered.
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBReconTransportProvider/convertCSVToArraylist - Data: Run Time Parameters - Value: []
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: childContainerTableNames - Value: []
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: parentContainerUniqueKey - Value: USER_ID
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusField - Value:
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: statusFieldLookup - Value:
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize left.
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/initialize - Data: dbDateFormat - Value:
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/defineMetadata entered.
DEBUG,16 Oct 2008 09:07:44,738,[OIMCP.DATC],Class/Method: DBFacade/getConnectionProp entered.
ERROR,16 Oct 2008 09:07:44,739,[OIMCP.DATC],Class/Method: DBFacade/getConnection encounter some problems: Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;Ljava.lang.ClassLoader;)Ljava.sql.Connection;(Unknown Source)
at java.sql.DriverManager.getConnection(Ljava.lang.String;Ljava.util.Properties;)Ljava.sql.Connection;(Unknown Source)
at org.apache.commons.dbcp.DriverManagerConnectionFactory.createConnection(DriverManagerConnectionFactory.java:51)
at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
at org.apache.commons.pool.impl.GenericObjectPool.borrowObject(GenericObjectPool.java:771)
at org.apache.commons.dbcp.PoolingDataSource.getConnection(PoolingDataSource.java:95)
at com.thortech.xl.gc.impl.common.DBFacade.getConnection()Ljava.sql.Connection;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata()Ljava.sql.DatabaseMetaData;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType()Ljava.lang.String;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Ljava.lang.String;Ljava.lang.String;Ljava.util.ArrayList;)Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema()Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(Lcom.thortech.xl.gc.vo.designtime.GenericAdapter;Lcom.thortech.xl.webclient.actions.CreateConnectorForm;Ljavax.servlet.http.HttpSession;Ljava.util.ArrayList;Lorg.apache.struts.util.MessageResources;)Lorg.apache.struts.action.ActionErrors;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
        at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
        at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
        at com.thortech.xl.webclient.actions.tcActionBase.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
ERROR,16 Oct 2008 09:07:44,739,[OIMCP.DATC],Class/Method: DBProvisioningTransportProvider/defineMetadata encounter some problems: DB_GET_CONNECTION_ERROR
com.thortech.xl.gc.exception.DBException: DB_GET_CONNECTION_ERROR
at com.thortech.xl.gc.impl.common.DBFacade.getConnection()Ljava.sql.Connection;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getMetadata()Ljava.sql.DatabaseMetaData;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getDBType()Ljava.lang.String;(Unknown Source)
at com.thortech.xl.gc.impl.common.DBFacade.getSchema(Ljava.lang.String;Ljava.lang.String;Ljava.util.ArrayList;)Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.getSchema()Lcom.thortech.xl.gc.impl.common.Schema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.detectMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
at com.thortech.xl.gc.impl.prov.DBProvisioningTransportProvider.defineMetadata()Lcom.thortech.xl.gc.vo.designtime.TargetSchema;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.getGenericAdapter(Lcom.thortech.xl.gc.vo.designtime.GenericAdapter;Lcom.thortech.xl.webclient.actions.CreateConnectorForm;Ljavax.servlet.http.HttpSession;Ljava.util.ArrayList;Lorg.apache.struts.util.MessageResources;)Lorg.apache.struts.action.ActionErrors;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
        at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
        at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
        at com.thortech.xl.webclient.actions.tcActionBase.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
        at com.thortech.xl.webclient.actions.tcAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
        at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(Lorg.apache.struts.action.ActionMapping;Lorg.apache.struts.action.ActionForm;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)Lorg.apache.struts.action.ActionForward;(Unknown Source)
        at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
        at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
        at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
        at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1077)
        at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:465)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
        at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Ljavax.servlet.FilterChain;)V(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
Caused by [Nested Exception]:

shouldn't the connect string look like jdbc:oracle:thin:@MyIP:1521:MySID ?

E55 fails to connect via cable or turn on Bluetoot...

Good afternoon!
I have the following problem with my E-55:
I was often using the phone as a modem, connecting it with a cable and using Nokia Suite. Some 2 months ago the computer (and Nokia Suite) suddenly stopped recognising that a phone was connected (it remained undetected, although the battery was beginning to charge). But it was still connecting via Bluetooth.
About a month later a problem emerged with the phone's memory. Although all apps were installed on the memory card, and text messages occupied some 300kB, NetQin Mobile Guard was only finding 4.5kB files to delete from cache and I was constantly receiving an alert about lack of memory. I couldn't send text messages (although I could receive them), add new contacts, edit calendar entries or change mailbox settings (the e-mail boxes were empty). I could still use the phone as a modem connecting it via Bluetooth.
The day before yesterday, for the first time I couldn't turn on Bluetooth, but when I closed all apps (using NetQin Mobile Guard to do that), it worked.
But yesterday it didn't. I did a hard reset. The phone is working, now has over 50MB free memory (compared with the mere few kB earlier). But it still doesn't connect with the computer via cable, and I still can't turn BT on (alert: Cannot carry out Bluetooth operation).
1. What can be the reason?
2. Can it be repaired? (I expect deep reset does the same as hard reset, so won't change much?)
3. If not, is it possible to carry over contact and setting backup from Nokia Suite (in .nbu format; I expect it would have to be converted) into the phone and running it without connection with Nokia Suite?
Loads of thanks in advance for your help!
Cheers!
-Mike

Hi m_b_p,
Thanks for your post!
We're sorry to hear that your device has suddenly become unresponsive to activating the bluetooth. A wire connecting the bluetooth part to the phone may have been dislodges some how. As you have performed a hard reset, we suggest you to take your device to your retailer or Nokia Care Point to have it inspected.
You may need to bring a proof of purchase.
Let us know how you get on with this.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Facetime "Fails" to connect via Airport Extreme using Comcast?

Greetings,
First time poster... tried researchings specifics on my situation and couldn't find anything so posting here to see if a solution has been found.
I used to have Verizon DSL for ISP with Airport Extreme as my wireless router. Everything worked including Facetime (only issue was the need for speed). Switched to Comcast as ISP which uses cable and had the Tech reconnect it to the Airport Extreme to behave as the wireless router. Internet is on and good... got a green light on the Airport Extreme. However, when attempting to connect via any device using Facetime (it will ring but as soon as it is answered I get "Fail" message and it ends) be it my laptop, desktop or either of our iphones I have IOS7 and IOS6 respectively same error. Did not make any modifications to Airport settings or any of my devices.
When checking the common response to this issue was a potential "Blocked Port" situation... but by digging a little deeper it appears that Comcast does not block ports that are relevant to Facetime (please confirm). I didn't see anything else that would suggest a solution at this point.
Help would be greatly appreciated as we enjoy using facetime to have our 6 month old daughter connect to our grandparents.
Thanks,
Andrew

The USB port on an AirPort Base Station other than the 802.11n model is only for use with an USB printer; hard and flash drives will not be recognized. The compatible base stations include version 5.0 of the AirPort software on a CD.
(27846)

No Modem - How to connect Via Dial UP?

as there is no modem in the mac book pro computers, how can i configure it to use while on holiday where the only connection is a dial-up?
is there any way i can use an old airport base station i have as a modem to go through a dial up?
any information will be helpful.

Methinks the Airport base station is not going to work as a solution when you want dialup.
What you need is a modem. Apple do a USB modem which is $49 (or whatever the equivalent is wherever you may be), but you ought to find this fast and check the settings before you leave. Trying to do anything on the fly like this always has its own set of problems.
Other modems may work, but you need to think about compatibility between modem, computer and OS.

Connecting via dial up connection

On a cisco router that has an aux port can be set up with a dial up connection as a backup. But, my question is how is this set up? for example, Do I plug in a land line to the router, setup the router aux port, and then dial in from anywhere? Or, is it the same as explained previously, but instead of plugin in a land line to the router I need a modem such as the Multi Tech MultiModem ZDX V.92 Voice/Data/Fax Modem? so it will be connected phone to modem and modem to router?
Thank you.
Alex

Alex
You would connect phone line to modem and connect modem to aux port.
HTH
Rick

Canon MX860 Fails to connect via wifi

Our MX860 suddenly stopped working. It's been a reliable printer on our home network for a few years now.
"Support code 300: The printer does not respond..."
I turned it off/on, which has been sufficient to resolve any hiccups in the past. No change.
I restarted the primary Mac (an iMac running 10.8.5). No change.
I downloaded the latest driver from Canon and installed it. No change.
I downloaded the Canon IJ Network Tool and connected to the printer via USB and ran through the setup process. It seemed to go smoothly, but at the end where the network version of the printer and scanner are supposed to appear in the Default section of the Add dialog for adding a printer, no dice. The USB printer and FAX entries are there, but no new network printer or scanner entries to select.
On the front panel of the printer in the WLAN setting list it reports:
Connection: Active
SSID: <mywifinetwork>
Communications mode: Infrastructure
Channel: 6
Data encryption: AES
Network authentication: WPA2-PSK
WEP bit: Disable
IP address: 10.0.1.191
Subnet mask: 255.255.255.0
Default gateway: 10.0.1.1
MAC address: 00:00:85:F5:DA:A1
Any tips/insight on what I should try next would be appreciated.
Thanks!

Try turning off the power again, but this time disconnect the power cord and USB cable for 5 minutes.
Then reconnect the power cord and turn on and check the network settings (in case the IP address has changed - it should not have but check anyway). Then open Network Utility (Applications > Utilities) and select the Ping tab. Enter the IP address of the MX860 and press Ping. You should get a ping response for each packet sent. If you do, then it shows there is a working path between the Mac and the MX. If there is no response, then there is an issue with the wireless connection between the Mac and the MX.

Failing to connect via HDMI port on Marantz sr7002 AV receiver.

I tested the HDMI ports with other equipment and they work fine. The Apple TV works fine when connected directly to the TV, but I need the HDMI port on the TV to connect the AV receiver. I do get the sound from the automated voice ("please connect keyboard...., etc.) through the sound system, but no signal is reaching the TV when I connect the Apple TV to the AV receiver. I tried different HDMI ports, different cables, etc. Any suggestions would be greatly appreciated.

Hi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards

C6 with Belle fails to connect via ActiveSync

Using the same credentials as previously used (before belle) the exchange account refuses to connect.
Keep getting "Invalid Exchange ActiveSync credentials. Check credential settings."
I am using Nokia C6 and before I upgraded to belle (both with symbian and anna) I was able to sync my calendar and emails.
But, after the upgrade I started to get the error.
Recently I purchased my N8 for my wife and I thought I should try it out again on the N8 (that does not have the belle upgrade yet). The activesync worked like a breeze.
Our company certificates require user to setup the phone lock code active. I was forced to do that on N8 as soon as I setup the activesync.
But with belle, if I turn the phone lock off, it doesn't even prompt me for that. Right now I have the two phones setup exactly the same (with the lock code active). The N8 connects and syncs up just fine and C6 does not.
I see other people are facing similar issues. A fix would be appreciated.
- Amit

I contacted Nokia support and all they could offer was soft reset, hard reset and then reinstall.. none of those worked..
Looks like there are lot of people facing problems with belle and ActiveSync. Anyone has experience solving it? oh! and swype ain't the problem.
Thanks.
- Amit

Can't connect thru dial-up on AEBS 802.11g modem

I have a new MacBook Pro 15" and discovered it has no internal modem. So I bought an Airport Extreme Base Station with modem (802.11g) because I'm going on vacation in a remote area and can only access the internet through dial-up.
I'm testing the modem at home first and have had no luck. I set up the new station to "connect by modem." I can connect to the new Airport network, but when I try to connect to the internet (via AOL), I don't get a dial tone and of course, don't connect. Network diagnostics said everything checked out except internet connection and server.
I attached the new base station to my DSL line to see if that worked and here I am--querying you good folks (using WDS). I tried the dial-up on a separate phone line, in case it was something in the DSL wiring that was causing interference, but no luck. Maybe the DSL is throughout every phone plug in the house? Should I be trying the dial-up on a line with no DSL access?
The Help menus suggest clicking "Modem" in Network options to choose PPP connections, but since there's no internal modem, I don't have a Modem option in my System Preferences.
Surely, it's not supposed to be this difficult to connect through dial-up?
All suggestions welcome!

The modem in the 802.11b/g AEBS is not a DSL modem.
You will need a DSL modem with an Ethernet output.
You will connect the output of the DSL modem to the
AEBS's WAN port.
Thanks, Duane, but I think my question may be unclear. Here at home, I have a DSL modem and right now I am accessing the internet with it connected to AEB's WAN port.
However, I will be traveling to a place with only dial-up access and want to take the AEBS with me, so I can use its dial-up modem.
I've tried to practice at home by connecting the AEBS thru its internal modem port to my phone line, but I can't get it to work or even get a dial tone when AOL begins its connection routine.
Since my home phone is set up for DSL, I was wondering if that might be causing the problem. I've been disconnecting the DSL modem and plugging the phone line directly into the AEBS modem port. But all attempts to log on to AOL by dial-up have failed.
Thanks for your help!

How to connect via null modem cable / console?

Hi
I need to connect from a laptop (solaris 10) to a sun fire v120 via null modem cable.
But I just can't get it work. I tried "tip hardwire" but it says "all ports busy". Looking for a solution I read that I should change in /etc/remote /dev/term/b into /dev/term/b....but this didn't help.
May anyone help me please?
Thank you very much in advance.

Guest wrote:
well the ports can't be busy, because I didn't use them......
>
You will get an "all ports busy" when tip fails to open the device. It is not the most descriptive of error messages.
I don't know what's wrong. Which command will I have to use to connect via console? And which configurations will I have to make?I'd check
a) that /dev/term/b exists
b) it is owned by uucp
Though I'm not exactly sure why you are using term/b, since most laptops don't have a second serial port, so I would presume that it would be term/b.

Lync client won't connect to a conference via dial-in number hosted on deterrent pool than conference.

I have been
troubleshooting a very strange issue with Lync clients being unable to connect
to a conference via dial-in number when the conference is hosted on a different
pool. This happens internally and there is no media gateway or SIP trunk
involved.<o:p></o:p>
Users are
unable to join a conference from Polycom CX phones and Lync 2013/2010 software clients
by dialling conference Dial-in number which is located on a different pool than
actual conference. Users are prompted to input their conference ID, however,
they are never connected to the conference (10 min silence followed by error
announcement). <o:p></o:p>
This only
happens if the dial-in number is homed on a different pool than conference.
Both pools are Lync 2013 Standard Edition running on Windows Server 2012.
Servers and clients are patched with the latest CU.<o:p></o:p>
I noticed that
when you call dial-in number’s SIP address, user will get transferred to a
conference (works ok). When you dial just a number users is never transferred
and RT Audio traffic still goes directly to a server which is hosting dial-in
number.<o:p></o:p>
After
checking Lync traces it looks like Lync client ignores the REFER message from
the FE server hosting Dial-in number and it never send an INVITE to the server
whit active conference.<o:p></o:p>
The only difference
between INVITES for working calls and calls that failed to connect to the
conference is the presence of the user=phone in TO header:<o:p></o:p>
Working
invite:<o:p></o:p>
TO:
<sip:[email protected]><o:p></o:p>
Failed invite:

Please try to disable refer support for all pools.
The problem seems occur when Attendant transfer the call to another pool.
Please provide more trace file information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My iphone 5 won't make a call when i fail to connect to the internet via 3g

My iphone 5 won't call when i fail to connect to the internet via 3g.
At work i dont have wifi i have 3g, if i launch say the sky go app,or the iplayer, sometimes they work and everything is fine...sometimes they wont load as 3g for whatever reason cant get a connection at that particular time........ if i then try and make a call the call will fail. I've experimented 25 + times and this is definately the cause.
(note: when the 3g connection does work, the phone has absolutely no problem calling people)
Anyone had this problem?
Even better has anyone got a solution?
Thanks,
Nick.

Are you sure that the carrier's signal is strong where you are having this problem? Certain building structures and locations have poor cellular signal strength and this often results in the "No Service" indication. Are other users able to get service in the same locations where you have problems?

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. My question is I now wish to add a second Airport extreme but am considering a hard wire connecti

I have a Airport network at home with a Time capsule connected via ethernet cable to modem. Also the network is extended wirelessley with an Airport Extreme. I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme. Can my network operate properly to extend the network with both a wireless and wired extend functionallity?

I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260

Modem of A200_10X fails to connect via dial up

Similar Messages

Maybe you are looking for