Modem on PCI TO PCMCIA adapter not working.

Hello,
I'm new here so please be gentle if im asking about something obvious. Like i wrote in subject i have problems on my desktop PC (not laptop) with my pcmcia Huwaei 870 modem wich is inserted into PCI TO PCMCIA adapter (Ricoh). On Windows(same machine - desktop PC) and on my laptop(old Acer) where i have Slack every things work magical fine but on my desktop Arch don't. Settings on both machines looks alike. Below some logs from Arch (desktop PC) just after when I pluged my modem.
kernel.log
Jun 21 11:20:33 arch pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jun 21 11:20:33 arch pci 0000:04:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
Jun 21 11:20:33 arch pci 0000:04:00.0: supports D1 D2
Jun 21 11:20:33 arch pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
Jun 21 11:20:33 arch pci 0000:04:00.0: PME# disabled
Jun 21 11:20:33 arch pci 0000:04:00.1: reg 10 32bit mmio: [0x000000-0x0000ff]
Jun 21 11:20:33 arch pci 0000:04:00.1: supports D1 D2
Jun 21 11:20:33 arch pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot
Jun 21 11:20:33 arch pci 0000:04:00.1: PME# disabled
Jun 21 11:20:33 arch ohci_hcd 0000:04:00.0: enabling device (0000 -> 0002)
Jun 21 11:20:33 arch ohci_hcd 0000:04:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 21 11:20:33 arch ohci_hcd 0000:04:00.0: setting latency timer to 64
Jun 21 11:20:33 arch ohci_hcd 0000:04:00.0: OHCI Host Controller
Jun 21 11:20:33 arch ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
Jun 21 11:20:40 arch ohci_hcd 0000:04:00.0: USB HC takeover failed! (BIOS/SMM bug)
Jun 21 11:20:40 arch ohci_hcd 0000:04:00.0: can't setup
Jun 21 11:20:40 arch ohci_hcd 0000:04:00.0: USB bus 8 deregistered
Jun 21 11:20:40 arch ohci_hcd 0000:04:00.0: PCI INT A disabled
Jun 21 11:20:40 arch ohci_hcd 0000:04:00.0: init 0000:04:00.0 fail, -16
Jun 21 11:20:40 arch ohci_hcd: probe of 0000:04:00.0 failed with error -16
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: enabling device (0000 -> 0002)
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: EHCI Host Controller
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 8
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: irq 22, io mem 0x130001000
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: startup error -19
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: USB bus 8 deregistered
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: PCI INT A disabled
Jun 21 11:20:40 arch ehci_hcd 0000:04:00.1: init 0000:04:00.1 fail, -19
errors.log
Jun 21 11:22:06 arch ohci_hcd 0000:04:00.0: USB HC takeover failed! (BIOS/SMM bug)
Jun 21 11:22:06 arch ohci_hcd 0000:04:00.0: can't setup
Jun 21 11:22:06 arch ohci_hcd 0000:04:00.0: init 0000:04:00.0 fail, -16
Jun 21 11:22:06 arch ehci_hcd 0000:04:00.1: startup error -19
Jun 21 11:22:06 arch ehci_hcd 0000:04:00.1: init 0000:04:00.1 fail, -19
messages.log
Jun 21 11:23:33 arch pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
Jun 21 11:23:33 arch pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
Jun 21 11:23:33 arch pci 0000:04:00.0: PME# disabled
Jun 21 11:23:33 arch pci 0000:04:00.1: PME# supported from D0 D1 D2 D3hot
Jun 21 11:23:33 arch pci 0000:04:00.1: PME# disabled
Jun 21 11:23:33 arch ohci_hcd 0000:04:00.0: enabling device (0000 -> 0002)
Jun 21 11:23:33 arch ohci_hcd 0000:04:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 21 11:23:33 arch ohci_hcd 0000:04:00.0: OHCI Host Controller
Jun 21 11:23:33 arch ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 8
Jun 21 11:23:39 arch ohci_hcd 0000:04:00.0: USB bus 8 deregistered
Jun 21 11:23:39 arch ohci_hcd 0000:04:00.0: PCI INT A disabled
Jun 21 11:23:39 arch ohci_hcd: probe of 0000:04:00.0 failed with error -16
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: enabling device (0000 -> 0002)
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: EHCI Host Controller
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 8
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: irq 22, io mem 0x130001000
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: USB bus 8 deregistered
Jun 21 11:23:39 arch ehci_hcd 0000:04:00.1: PCI INT A disabled
dmesg.log
nothing here
If You need more info (log or something) just type and i will send all.
This is my PC machine:
- ASUS M3A78 PRO
- AMD Phenom 4x2GHz
- 4GB ram
- 250GB Sata II disk
- pcmcia adapter is Ricoh RL5C475 CardBus Controller
This modem is my only way to connect with net so please help (my laptop is down and i hate MS software)
Ps.
Sorry for my poor english , i hope You understand all (or enough to help me )

Noone knows ? I think it's a bug in kernel. I'll wait and we see .

Similar Messages

Has anyone gotten the FBUS PCMCIA card to work on a PCI to PCMCIA adapter board?

I have lots of success with the PCMCIA card in laptop PCMCIA slots, but no luck with the PCMCIA card in a desktop PC with a Quatech PCD-B/PCI-E PCI adapter for PCMCIA boards. I am thinking that my problem resides with the adapter board but I would like to know if anyone has had success with the FBUS series 2 PCMCIA card with a PCI to PCMCIA adapter. I got a WinXP SP2 IBM ThinkCentre desktop. Thanks

We have ever used some PCMCIA to PCI adaptors, they are working properly with NI PCMCIA-FBUS card as well as NI-FBUS software.
I'd like to recommend the single CardBus PCMCIA slot adaptor from Elan Digital System:
http://www.elandigitalsystems.com/adapter/pci.php
We have used the adaptor in a Dell Dimension desktop, running XP SP2, and NI-FBUS Configurator 3.1.1 runs well.
Another adaptor is a long card, which is Gigabyte GA-MPCI, it works well with some old desktops, but the length of the card is about twice of the card of Elan Digital System; it might not fit your requirement.
Hope it helps.

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

G5 dvi to vga adapter not working

DVI to VGA adapter not working with my G5 Dual 2.3 GHz Power PC. I am trying to use a VGA Monitor but can not get a signal. I also am using a Dell with a DVI Input and that works fine using a DVI Cable from my G5 to the Dell u2410.

Bad adapter?
The G5 ports are DVI-I. Any good DVI-I to VGA adapter should be fine.

StarTech Adapter not working with Dell Inspiron 15, model 3521

Side Note: I wrote a reply to a thread that was from 2013. I do apologize because the link was sent to me by my bf and I did not realize how old it was. Since my reply has to be approved I can't delete it.
Current Issue: StarTech Adapter not working with Dell Inspiron 15 model 3521
I bought my Dell laptop last year and at first I did not realize that it had only one audio jack (combo, as the specifications manual says), I only noticed when I was trying to plug in my Ozone Rage ST headset.
I searched online threads and found out that I needed an adapter and most people mentioned Headset Buddy. I couldn't find any adapters for sale in my country (or employees didn't really know what I was talking about) and since Headset Buddy is a bit expensive, I decided to try StarTech Headset adapter for headsets with separate headphone/microphone plugs - 3.5mm 4 position to 2x 3 position 3.5mm M/F www.amazon.com/.../ref=cm_cr_pr_product_top.
It arrived today and let me tell you that I can't make it work. I can hear everything but I can't get the external mic to work or even be detected. I have always used my headset (mostly for gaming) and I prefer to use my external mic rather than the internal one. First I connected my headphone and mic jacks to the adapter and only after that did I connect it to the laptop combo jack. I also tried vice-versa. It didn't work, regardless of the order. I even tried with a different headset and it still didn't work. What else can I do?
I have also found a thread on Dell forums saying that Headset Buddy doesn't even work on Dell Inspiron 15, model 3521. So since it doesn't work and I'm assuming StarTech doesn't, either, what am I to do/buy?! I am getting extremely frustrated and I'm very disappointed with Dell because the brand should have included with the laptop a proper working adapter for these situations and not make its customers buy an extra accessory to make whatever working gear they already had function. It just doesn't make sense to me! Either make the changes work properly or simply don't touch anything. I spent some of my savings on this laptop which, overall, is great but now I am being forced to spend more on an item to allow me to use my headset. I am running out of options here and even Dell can't seem to tell its customers with 100% certainty what really works for this specific model.
If I can't make the adapter work, I just hope I can return it, otherwise I'll end up with no refund and with a piece of equipment I have no other use for!
Any thoughts?

Hi,
Thanks for your reply.
This is the first time I was forced to buy adapters such as these so I don't know if I'm doing something wrong or if there's anything else I can do to make it work. When I plug the adapter to my Dell, the laptop presents me with several options such as: headphones, headphone, speakers, skull candy headphones, etc (maybe some may have different names but since I see them in Portuguese, I'm not quite sure how they appear for someone who has the computer in English), I have picked different options and it still doesn't work, the only noticeable changes are sound quality related, I guess.

My hdmi adapter not working anymore, no physical damage. Solution?

My hdmi adapter not working anymore, no physical damage. Solution?
Strange is, that i used it several times, it worked fine. Then wothout any reason (like software updete, etc) it just stopped workung, no sync.
I have not changed any parameters of my TV or Beamer.
Hardware:
Ipad 2, Apple Ipad HDMI Adapter, Samsung P2770FH, Optoma HD 65.
Thanks for any help.

I've only used mine a couple of times without any problem, but due to the thinness of the iPad, care has to be taken in inserting the adapter. Slightly wrong angle and it won't go it.
I had a laptop a few years ago where the USB connector failed. I had it replaced under the warantee, The service man told me it was not an uncommom failure on a laptop due to people "torquing" the USB socket while inserting/removing USB items. I have much the same feeling when inserting either the charger cord or my HDMI adapter.
From your description, unless the HDMI adapter failed internally, it sounds like the socket is causing the problem. A few days ago we watch our first movie from the iPad via my ATV2 and "Air Play". Worked great so I don't plan on using the HDMI adapter much at all in the future. Yes, it is a $99 solution, but it works for me. Of course, I already had the ATV2. I doubt if I would buy one just for this abiliity. If nothing else, it seems like a trip to the Apple Genius bar is in order for maybe a replacement unit.
However, with iOS 5 coming out with supposedly total mirroring, it might be worth thinking about getting an ATV2.

Microsoft teredo tunneling adapter not working

i have been facing this problem from about 3 days and I am not able to connect my phone through cable to my laptop neither i am able to use bluetooth...so I checked for the prblm and its this teredo adapter not working which is related to the devices i think....I
have followed every measure I could given by microsoft...I have tried uninstalling the teredo adapter but i couldn't...actually I clicked on the option dat was der as uninstall but it didn't....
after uninstalling only we had to restart the computer but since the uninstallation was not successfull so it didn;t helped me..
plz tell me some solution for this prblm!!!

Hi,
I am afraid that this forum is not a correct forum for this issue. Since this forum is discuss about Windows form development . I suggested you posting this thread to
answer.microsoft.com-Windows OS
Have a nice time!
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Why does my digital AV adapter not work with my iPad

Why does my digital AV adapter not work with my iPad

i was going to try it on a flat screen hdmi input, but just as i plug the apple digital av adapter in to my ipad it says "this accessory is not supported by ipad"... my itouch says the same thing... any ideas?

PCI Simple Communications Controller not working

PCI Simple Communications Controller not working on hp pavilliong6-1003tx

Hi
Download, save & install --
Windows 7:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-94322-2&cc=in&dlc=en&lc=en&...
Restart system after installation.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

IPhone 5 with ipodcable/30pins adapter not working after update IOS 7

iPhone 5 with ipodcable/30pins adapter not working after update IOS 7. The car radio is not responding when I connect the iPhone. iPhone 4s with IOS7 without the 30 pin adapter is working. So I think that the 30 pin adapter is the problem.

No no dear this is not my problem
My problem that i mean i say when i on my
Cellural data my gprs not working and not work my internet

PCMCIA firewire adapter not working ....

with my LACie 40GB USB/Firewire mobile hard drive..
I previously posted that my TiBook 550 firewire port & the Lacie firewire
port are fried. I was hinted that the Tibook firewire port may have been
the culprit but not certain.
I bought a 3rd party PCMCIA firewire adapter IEEE 1394A
Here's the issue it works with a new firewire 3.5"drive enclosure which has
it's own power supply.
With the LAcie it runs off the power from the TiBook when I use the USB
port.
Is there a specific PCMCIA fire wire adapter I need to run the firewire bus
power of the LAcie drive?
I'm at a lost and REALLY behind in backing up data because of this.
Need help thanks ~A~

Thank you for clarifying this to me.
I went to the Apple store today, and not much was told except to buy
a new logic board!
My new 2.5" firewire enclosure does have a power supply port.
So looks like that seems to be my answer for now.
It does seem odd to have a power suppy for something portable, but
I guess when you blow firewire ports and need to go through a PCMCIA
adapter that's my best option.
The one thing I am curious about is that the LAcie firewire port & Tibook firewire port though the harddrive isn't mounting on my desktop still brings power to the drive.
Do you think on the "off the wall" chance that by adding a external power supply to the "injured" LAcie drive that it may allow my Tibook to mount
on the desktop?
A strange inquiry but worth a shot!
What do you think? ~A~
To add to Hardy's advice: Some pocket-sized FW drives
come with their own AC adapters. Others can use such
an adapter, but it's an optional accessory. Others
have no provision for connecting an external power
adapter to them, and must draw their power from the
FireWire bus. They can't do that when the FireWire
bus is on a PC card, unless the PC card adapter
itself came with a short auxiliary cord to connect it
to one of the host computer's USB or FireWire ports.
That cord is provided to draw power from one of those
ports for any bus-powered devices that are connected
through the PC Card adapter.
Therefore, you will need to do one of several things,
listed roughly in order of preference:
1. Use the AC adapter that came with your pocket
FireWire drive, if one did;
2. Buy such an adapter, if you didn't get one with it
but it can use one;
3. Use the auxiliary power cord that came with your
PC Card FireWire adapter, if one did;
4. Buy a different FireWire enclosure for your pocket
hard drive that allows the use of external power, and
comes with its own AC adapter.
5. Buy another PC card adapter that comes with an
auxiliary power cord.
#4 is preferable to #5 because it's certain to work,
not because it's necessarily less expensive.
Note that some portable hard drives need more power
than the USB or FireWire bus in a Powerbook can
supply. It sounds ridiculous — why make a portable
drive that requires you to carry an AC adapter with
it? — but it's true. This is why #5 above may not
work: even with an auxiliary power cord in use, your
drive may overdraw the power budget of the port to
which the cord is connected, and you'll be right back
where you are now.
PowerBook G4 Titanium 550Mhz Mac OS X (10.3.9) airport express, Safari, 512 MB
PowerBook G4 Titanium 550Mhz Mac OS X (10.3.9) airport express, Safari, 512 MB

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

MSI GNB MAX and RICOH R5C476II PCI to Cardbus bridge not working! Help

Why my PCMCIA & CARDBUS Card Reader based on RICOH R5C476II Chipset not
working on MSI GNB MAX BOARD (with newer bios 2.3)???
My Card reader is fine and working properly on many ithers motherboards like: ABIT BD7-II based
on Intel 845E Chipset, or ASUS TUSIM, ASUS TUSL, and ASUS PIIIB-F
Why ??
Please help me.

Yes, sure. I'm trying to use all of five PCI slots, and after slot chnge I,m setting Reset Configuration data in BIOS.
result is the same in all Card positions. Card is detected, but not working corectly.
I'm trying to resolve any hardware conflicts by disabling all od internal mothebrord components like IEE1394 Audio, Serial Ata and others - no cahnges, no solutions ....

DVI to Video Adapter Not Working...

Hi,
I bought this thingy to view video from my Dual 2 Ghz PowerPC G5 on a Panasonic HDTV, using one of its s-video inputs. The video is blank when I switch to that input. I tried using the "Detect Displays" in the Displays preference panel. I do get a picture, but it's heavily distorted no matter what resolution I've tried - it's treated as a VGA display. Composite output from the adapter does not work at all.
The video card is a NVIDIA GeForce 6600LE (came with the computer - two DVI outputs). Apple claims this adapter works on Power Mac G5 with DVI port, but I don't think it does. I also tried hooking it up to a VCR as Apple claims you can do, but no luck there either.
Any advice or alternatives outside of Apple TV appreciated.

Thanks for the technical information. That was very helpful. I took the adapter to my local Apple Store (even tho I didn 't buy it there) and asked them to test it, but they couldn't get to for a couple of hours. But, they gladly gave me a new one to try at no charge.
As before, I plugged it into port 2 of the graphics card with an s-video cable to the tv. No success - except the picture was completely blank on the TV instead of distorted like before. Port 1 was occupied with a VGA monitor. I shut down the computer, TV, and unplugged both ports. I then moved the adapter from port 2 to port 1 and left port 2 open, meaning the VGA monitor wasn't connected to the graphics card at all.
I turned the TV back on and restarted the computer. Lo and behold - after the booting process was done, my desktop appeared on the TV. I shut down the computer again and reconnected the VGA monitor. Ta-dah! - I now have dual monitors.
As a further test, I hooked up the s-video from the adapter to my DVD recorder and recorded the video output from a full screen QT video to its built-in hard drive. That was successful as well. The only problem is that there is a minimal black border around the video since I was not able to pick a resolution for the TV that fills the entire screen. I may need to play with TV's aspect settings to get rid of the border, or crop it out later.
All that's left is to capture the audio and sync it with the video, then output to my format of choice. There's my fair use copy. The quality of the video won't be as good as the original, but what the heck - I'm the only one using it anyway.
Apple should find a way to convince TV and movie studios to sell their stuff on iTunes Store without DRM, at a higher price - like EMI is doing with their music. I would gladly pay the difference just so I could convert and burn my videos to DVD with iDVD or DVD Studio Pro.

Modem on PCI TO PCMCIA adapter not working.

Similar Messages

Maybe you are looking for