Modem problems with neo2 865pe (help?!)

I just upgraded my computer today with the exception of sound card/cdrw/dv/modem everything is new!~
My problem is that I have modemblaster ESS chip modem and I am running windowsXP SP1. Windows sees it using IRQ18!
I have onboard FD controller, LAN, Com1, LPT1 enabled,
I have disabled com2 and onboard sound.
I have 2 optical drivs using the ata66 connector and 1 serial ata 80gig HD using both in native mode.
When I try to connect to the internet the computer immediatly disconnects. My ISP (earthlink) says this is a windowsxp or motherboard(modem) issue that they won't help with.
I purchased these upgrades just for online gaming and now I cant even get online. Windows XP says com1 and com3 are active yet there is absolutely nothing installed. I haven't installed anything but INTEL INF drivers, new bios (tried 1.0 and 1.40) and windowsxp updates. The modem is using the latest driver as well.
Windows XP shows the modem and S-ata controller are both using IRQ18 and nothing I do to manualy change the irq for pci slots in bios seems to have any effect.
Thanks in advance
MB 865PE ne2-ls
1gig dual channel ocz systems matched ddr400
P4 2.4ghz 800FSB
80gig s-ata HD
SB audigy ex+
SB broadxent modem DI3631
Nvidia 5900 video
Windows Xpsp1

When I built my computer I think the exact same thing happened to me. I could dial up but as soon as it began authenticating it would immediately disconnect me. I had a broadxtnd modem (something like that), on a guess I tried buying a different modem a Zoom and it works just fine. I tried all of the PCI slots with the old modem and none of them worked, this new modem is working just fine.

Similar Messages

Big problem with neo2, please help

Hi
I just got my new neo with bios 1.4already in it and a 3000 winchester.
i did a clean install of windows, then newest 5.10 nforce from nvidia.com, I did not installed firewall.
And everything was cool except ethernet because it was not recognized (I mean the Nvidia was recognized but realtek gigabit was not recognized). here is the first question, Do I really need gigabit lealtek enabled in bios to connect to internet???
i have a comcast high speed internet and on other boards I don't need to configure anything, just install the windows and internet was working. unfortunately here is different, after installing windows and drivers n-force I don't have acces to the internet!!!!!!! I don't know what to do. On the back of mobo there arwe 2 lan connections slot. When I plug my cable to the first one, I don't see any light coming from the cable (you know the orange light bipping frequently) but windows is recognizing that cable was plugged in. When I plug it to the secong lan slot the orange light are binpping but the windows is saying "internet cable unpluged"!!!1
What a heck is going on??? please help me!!!!!!
I hope you can help me
Thank you

nevermind. I reset modem and everything works !!!!!!!!!

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

I restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

i restore my iphone 3gs but after that iTunes show a message there is a problem with your iPhone, help me please

Yes. Talk to whoever replaced the battery. Sounds like they broke something.

Problem with NEO2 and sata controller card

1.Product Type: MSI K8N Neo2 Platinum (MS-7025)
and the controller card is a InnoVision DM-8301 and the hard drive is a Seagate ST3320620AS
2.BIOS version: The newest one, 1C0 or something.
3.External VGA Type: Geforce 6800 GT
4.CPU Type: AMD 64 3500+
5.Memory Type: G Skill ZX 2048mb.
6.Power Supply Type:
7.Operating System: Xp Pro
8.Problem Description:
Hello. I have a strange problem with my controllercard. I wrote this text to InnoVision suport and they send me files and bios updates for a whole week and it was still the same problem. And then i tried the card in an older computer and everything worked fine.
I wrote
"Hello. I got some problems with my new controller card. I can find my new harddrive ,that's conected to the controller card, when iam inside windows and it's seems to be no problem. I can look on every seting on it and everywhere i look i can read "No problem". I Also did some test with the seatools programe and everything was fine. But when i schould copy files to it the coumputer start lagging after a few seconds and i cant do anything. After a while i can move the mouse around but the it laggs again. My computer is overclocked at the time but i have tried to use the harddrive when it's not clocked also. Also when im goin in to teh controlpanel and starts the setings for Sillicon Images sata controll and have music on my computer, the music laggs for a very very short moment. Something must be wrong and i can not find it."
It's still the same problem in my computer. The older computer had a MSI moderboard with a VIA chip and i have a nForce 3. InnoVison said i should talk to you about this problem. I have 3 harddrives but i use this controllercard because i want to have my computer overclocked and then i can't use 2 of the sata ports as i think you know.
I would be very thankful if you could help me with this problem.
//Martin

I've used a noname SATA pci card (non raid) with SIL3112 on my neo2 without problems with 1C bios.
Think you may try with a disk lower than 48bitLBA need (137GB barrier), eg a 120GB disk
Quote:
have the InnoVision EIO DM-8301 and had alot of problems using it with WD 160MB SATA drive.
I am using Intel 865 based MB with 2 original SATA channels. The original SATA channels are bootable.
I could not used the EIO card with 160G HDD. The whole setup is working only after I connected oine of my 120G Segate SATA HDD to the EIO Sata card.
I think this card do not properly support HDD above 120G.
Please respond to: [email protected]
http://www.devhardware.com/forums/storage-devices-80/sata-as-boot-20080-2.html
Btw: you have xp sp2 ?
48bitLBA is not enabled in the first version.
http://www.48bitlba.com/winxp.htm
Edit:
Here's another with complete different setup and same problems
http://forum.tweakxp.com/forum/Topic212148-4-1.aspx
I doubt it has anything to do with your motherboard and/or bios.
Btw: I looked at innovision and their drivers in download area are very old.
Get the latest SIL3112 drivers for XP here:
http://www.siliconimage.com/support/supportsearchresults.aspx?pid=63&cid=3&ctid=2&osid=4&
And remember 3112 is sata150 only , so it's not sure it will work with your drive at all .
Anyway it should be set to fixed sata1.5G with jumper - not certain the controller can autonegotiate
without trouble. You cannot have command queing enabled either , disk support only NCQ and controller TCQ
so having command queing set ON will cause major conflicts in data transfers.

Possible internal modem problem with older iBook (Mac OS X 10.3.8)

I have an older iBook - from year 2000 or 2001. So its airport card is so old it's stopped reliably working & I don't know where I could find a replacement. In the meantime I want to get internet connection on it so I've tried plugging a phone cord from the wall outlet (that I always use succesfully for my desktop PC) into the laptop and typing in the phone #, account name and password of my desktop's internet account under "internal modem." BUT I keep getting a busy signal over & over when I dial up. I called my ISP & they thought it's a problem with my laptop's modem. I called Apple & they thought it's an issue with the ISP. Help?

Hi,
So its airport card is so old it's stopped reliably working & I don't know where I could find a replacement.
If you have been using an internal wireless network, the router (base station) should (normally) allow you to connect via an Ethernet cable from the corresponding port in the iBook as well.
BUT I keep getting a busy signal over & over when I dial up
Without knowing any details, this seems to indicate that the modem does work. Wrong number/own number? Have you checked that everything has been entered correctly according to the instructions from the ISP?
Could KB article # 106748 possibly be of any help here?
Jan

Several problems with Neo2 Plat - BSOD, lockups, reboots

Hi all!
I bought myself a new computer today (or well, I bought the parts and built it), but I'm having problems getting it to run well. I've only had Windows installed for a little over four hours, but have already had lots of problems:
1) I will get random Blue Screens of Death. The computer will reboot itself so quickly that it's hard to see what error messege it gives, but I thought I was something about IRQ. So I disabled all devices that I don't need, to cut down on possible IRQ conflicts.
2) The computer will freeze. This happens occasional, and doesn't seem to be related to any particular task. One time it froze will I was running 3DMark 05, the other time when I selected a file on my SATA-disk.
3) Files are corrupted. A lot of files (again on my SATA drive) seem to be corrupted - I get Cyclic Redundancy Check errors on a lot of them, and I'm pretty sure the files worked in my old computer.
4) The computer will reboot for no reason. Just as the freezes, this doesn't seem to be related to anything in particular. Suddenly the comp will just reboot.
This is my hardware setup:
Mainboard: MSI Neo2-Platinum
CPU: AMD64 3500+
CPU Cooler: AMD Boxed Cooler
RAM: 2 x 512 Corsair 3200 Value Select
Graphics Card: Gainward GeForce 6800LE
Sound Card: Sounblaster Audigy2 ZS
DVD-Drive: Nec 2500A
PSU: Antec TruePower 480
Generic Floppy Drive
Does anyone know what might be causing my problems? If it had been only reboots I would've guessed that my PSU is the culprit, but with the corrupted files and BSODs as well I keep thinking it must be the mainboard...

Argh, putting the SATA disk on channel 3 instead of channel 2 didn't help anything at least. Got a BSDO -> Reboot while trying to access files on the S-ATA disk.
I should say that I'm using the latest drivers for everything - graphics card, soundcard, BIOS etc. Also, I seem to be having a problem with Live Update. When I try to use it, it say "The Service Has Not Been Started".
Also, I tried to go into BIOS and change HTT from 5x to x4, but when I tried to do that the BIOS seemed to freeze up. I couldn't escape from the HTT dialouge box (which by the way didn't show any text, only the title), not by pressing Escape. CTRL-ALT-DELETE worked for soft reboot, though.

I am having a problem with ICLOUD. Help!

I am having a problem with my icloud. So here is the story. I had iphone 4. My contacts were backed. Someone stole my iphone. I got a new iphone 4s. My contacts did not sync from my previous iphone 4. so someone told me to restore to iphone 4 backup. I did. And wow! i got all my contacts back. I want all my contacts to be saved. And i don't want to lose them, it took me a while to build this list properly. With email and number and address.
Here is what i tried so far, i backed up from itunes to computer, then backup to icloud, then I did from my phone, i turned the contact switch on also, and the swtich on to back up to icloud. When I go to icloud.com. it's not there. If anyone can help me with this issue I would appreciate it. because i have a lot of contacts, and I need to save them in a way, I won't ever lose them.

You would need to backup into icloud again also if you have enough room to backup. If not purchase more icloud backup or backup to itunes. Sync your contacts back to your email where they will always be.

Problem with nokia 6151:help me!!!

hello,
i have a nokia 6151 and i have any problem....
-when the mobilephone is starting is very slow and the screen si light on only for five seconds and after is light off. this phone haven't OS and i don't know because it have need more time for to start;
-when i use phone in a call suddenly switch off...i don't know why...i buyed this phone only 5 mounths ago, and i don't use it more...
-when i find files in the gallery,i wait many time for to show this...i haven't many files in my gallery...
i change old software with new but the problems is the same.
Please, can someone help me?
tnx so much,
Simo

Please try using the phone without a Memory Card instered. If this solves the problem then you have got a bad memory card. I have had similar problem with a Nokia 6230i with a defective MMC card.
Experience and persistence are second to none just ask user one.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question...

Problems with F4 Value Help in NW2004s Portal

Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander Sperling

I have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
      ELSE.
        CONCATENATE me->js_close1
        `portalFireEvent('com.sap','`
        me->element_id
        `',"`
        key
        `");`
         INTO me->js_close1.
        EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
    name = <wa_params>-value
    namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well.

Serious problem with database need help

hello experts
i am working with MS-ACCESS and connecting it with java programing
now the problem with me are
according to my need i have to create a table that contain Autonumber field
but when i insert element in this table by query
String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
st1 = con1.createStatement(); it gives sql exception but when i remove
autonumber field and make it simple field it works ok but i want to keep autonumber field and thn want to insert it
is it possible to create a dynamic table in ms-access through java query like
String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
here topic id some variable that contain table name
i think problem is that MS-ACCESS has no varchar data type plz help me
The complete code i written is as follow
<html>
<%@ page language="java" import="java.sql.*,java.text.*" %>
<head>
<title> Processing the post request </title>
</head>
<body background ="images/modbkgnd.jpg" bgproperties="fixed" >
<%
   String param1="",param2="",topicId="";
   Connection con1=null;
   Statement st1=null;
   ResultSet rs1=null;
   int a=2,reply=0;
   java.util.Date date = new java.util.Date();
   DateFormat df ;
   df = DateFormat.getDateInstance(DateFormat.FULL ,java.util.Locale.UK);
   String dateformat = df.format(date);
   String username = (String)session.getAttribute("forumlogin");
   param1=request.getParameter("Subject");
   param2 =request.getParameter("message");
try
   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
   con1 = DriverManager.getConnection("jdbc:odbc:lingua");
   String query1 = "insert into Forum (Subject,Author,Date,Reply) values('"+param1+"','"+username+"','"+dateformat+"',"+reply+")";
   st1 = con1.createStatement();
   out.print("hello i am here");
   boolean posubject = st1.execute(query1);
   out.print("hello i am here");
   String query2 = "select *from Forum";
   rs1 = st1.executeQuery(query2); //retriving table id for creating
    out.print("hello i am here"); // message table
   while(rs1.next())
       topicId = rs1.getString(1);
   String query3 = "create table"+"topicId"+"( message varchar(1000) NOT NULL,author varchar(50) NOT NULL, date varchar(30) NOT NULL)";
   boolean createtable = st1.execute(query3);
   out.print("hello i am here");
   if(createtable)
      String query4 = "insert into"+"topicId"+"values('"+param2+"','"+username+"','"+dateformat+"')";
      boolean insertmess = st1.execute(query4);
}catch(SQLException ex){
    out.print("sql exception");
finally
   st1.close();
   con1.close();
%>
</body>
</html>

hello experts
first i change my Date to date and thn try but it was not working.
and thn i try as dinesh_tcs said
i change my query as
String query3 = "create table"+"topicId"+"( message string NOT NULL,author string NOT NULL, date string NOT NULL)";
but nothing help me
one more thing actually i don,t want to insert manually the field of autonumber what i want that my query work when i leave the autonumber field to insert values in the table ( or whatever way i want to insert values in that table by keeping autonuber given by MS_ACCESS)
plz do the change in code i have maintained above or if not possible thn write the query that u have tested

Lenovo S205 & Windows 7 64bit. Problems with graphics, please help

Hi,
I recently bought a Lenovo s205:
AMD E-350
It came with 1GB but I upgraded it to 4Gb RAM (1333 running at 1066)
Windows 7 64 Ultimate.
I have tried also Windows 7 32 (Professional, ultimate) and all versions give me the same problem, I will explain here:
I have tried in AHCI mode and IDE mode from the bios and done fresh installs of Windows. Still the same.
After installing all the drivers, I get randomly in different programs "black" or sometimes "white" menus. Whenever I set the cursor on the menu (White or black part), the letters start showing up.
On Firefox for example, it happened where you write the address (Ex: www..) And when searching images too.
I have tried the original drivers that the Lenovo's website has for the S205 and the latest from Ati/AMD and nothing solves the problem.
What can this be? Faulty ram? Faulty OS? Problem with the graphic card drivers?
Please help, it is so frustrating.
Thank you so much.

Thank you very much for your help.
I will try capturing some screenshots if that helps.
I can discard the problem with the ram at the moment. I have tried a new set of ram (two 2gb modules = 4gb in total). The problem persists, even when they are tried individually. I also tried the original ram module the Lenovo came with (1module of 1gb), alone. Problem persists too.
However, I do not have a problem trying the VGA output. Will this help too? As I do not have any screen with HDMI at the moment.
What I will do too, is to try a Windows 7 from another disc, a Home version 32 bit. I hope this can get the problem fixed.
The main issue is that I bought this computer from Germany (From a store on eBay) and came with DOS. I will have to return it to the seller, I assume, if the rest fails to show any improvements.
Thank you for your reply and any more suggestions are welcome.

Having Problem with Spry Menu - Help appreciated

Hello there
I am currently developing my website but I am having terrible problems with the spry menu. I have tried lots of things but not yet resolved the issue. I will try to give as much info as possible. My website is www.huntfilms.ie
When I am in dreamweaver the site looks fine and when I preview in browser also looks fine but when I have uploaded to server there is the problem as you can see.
I uploaded all the files that are required I think . I have attached a screen grab of my server view below. : I have six spry files : js,css and four giff files : I have included the code below. I would apprecaite help as been at this for best part of day with no luck ; going mad here
thanks
Barry
<script src="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
    <h1>Hunt Films</h1>
</div>
<ul id="MenuBar1" class="MenuBarHorizontal">
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/home.html">home</a>    </li>
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/sample.html">Sample work</a></li>
    <li><a href="file:///Macintosh HD/Users/barryhunt/Desktop/huntfilms1/Contact.html">Contact Us</a>    </li>
</ul>
<div id="mainContent">
    <p><iframe src="http://player.vimeo.com/video/17962693?title=0&byline=0&portrait=0" width="400" height="320" frameborder="0" webkitAllowFullScreen allowFullScreen></iframe> </p>
    <p> </p>
    <p>Welcome! </p>
    <p>Hunt Films was set up in January 2011 by documentary maker Barry Hunt.</p>
    <p>Barry received training in TV and Video Production with FÁS in Tralee, Co Kerry. During this training Barry produced a series of short films about local artists. In 2006 he worked as assistant editor on the successful RTÉ drama series, ‘Love is the Dfile:///Users/barryhunt/Desktop/Picture%201.pngrug’.</p>
    <p>Since 2010 Barry has embarked on solo projects producing two entertaining half hour documentaries. 'Liberation', explores the world of pigeon racing in Dublin. This film was very well received at the Galway Film Festival 2011. More recently Barry produced 'The Gregory Seat', a documentary which follows Maureen O'Sullivan’s campaign to be elected in the 2011 General Election.</p>
    <p>Barry looks forward to producing more documentaries. He is interested in human stories and hopes that this will form the basis of his future work. At present, Barry is developing projects for film festivals and general broadcast    </p>
    <p> </p>
</div>
<div id="footer">
    <p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>
server view of files uploaded file:///Users/barryhunt/Desktop/Picture%201.png

here is the code still not working can anyone tell me why
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="oneColElsCtrHdr">
<div id="container">
<div id="header">
    <h1>Header</h1>
</div>
<div id="mainContent">
    <ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a class="MenuBarItemSubmenu" href="#">Item 1</a>
        <ul>
          <li><a href="#">Item 1.1</a></li>
          <li><a href="#">Item 1.2</a></li>
          <li><a href="#">Item 1.3</a></li>
        </ul>
      </li>
      <li><a href="#">Item 2</a></li>
      <li><a class="MenuBarItemSubmenu" href="#">Item 3</a>
        <ul>
          <li><a class="MenuBarItemSubmenu" href="#">Item 3.1</a>
            <ul>
              <li><a href="#">Item 3.1.1</a></li>
              <li><a href="#">Item 3.1.2</a></li>
            </ul>
          </li>
          <li><a href="#">Item 3.2</a></li>
          <li><a href="#">Item 3.3</a></li>
        </ul>
      </li>
      <li><a href="#">Item 4</a></li>
    </ul>
    <h1> </h1>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <h2>H2 level heading </h2>
    <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio.</p>
</div>
<div id="footer">
    <p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

Pdf causes problem with opening files: help, please!

The operating system on my computer is Windows xp and I use Adobe version 11.0.6.
I am having a problem that arises when I get a warning message (particularly when opening pdf or xls files): "AcroRd32.exe - Application Error: The exception unknown software exception (Oxc0000409) occurred in the application at location 0x00411e0b". I am then unable to open most files - pdf, xls, Word etc. - until I switch the machine off and then on. I have discussed this problem with Microsoft, who eventually said that it seems to be caused by something related to Acrobat software.
I should be grateful for advice or help from any participant in this forum.
Many thanks in advance.
John Porter

To test the automount hypothesis, you could create
a new user with a home directory someplace completely different and NFS-free, like /opt
useradd -m -d /opt/testuser -s /bin/bash testuser
passwd testuser
Then login to CDE as the user.
It does sound like there's something broken with $HOME/.dt
cheers

Modem problems with neo2 865pe (help?!)

Similar Messages

Maybe you are looking for