Modem status on hold after some inactivity

here is the problem i have nokia 5320 XM .I have edge gprs by airtel.
When i remain inactive for 1 hour or so the modem status shows "on hold" and if i have a download in progress it also breaks and stops.
Is there a way to use the internet connection contniously without getting disconnected because while downloading large files its a big problem for me.
please help me........

It is a X7675. I got a new driver from Lexmark. After downloading the new driver I got two drivers Series 7600 in my list of drivers. It took me a while to find out which one to use.

Similar Messages

  • EP Web services need to be restarted after some inactivity period

    Hi All,
    My EP Web services go down after some inactivity period. The services need to be restarted.
    Can anybody help me on this?
    Thanks!

    Hi Sonali,
    Did you find the solution? We are facing the same issue. We have bunch of web services setup with SAML 1.1 authentication but after we refreshed our Quality system from production system, none of the web services are working. I cannot even see the call coming either in SRT_UTIL (under DELAY_L_<QID>) or in SOAMANAGER trace monitor.
    Your help will be highly appreciated. Thanks in advance.
    Thanks,
    Pratik

  • I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED. After some months of use my MBP died. I got it checked in Apple verfied Service centre and was told that logic board was to blame

    I have a mid 2009 13'' MBP. I got the battery replaced in Apple store, It then stopped displaying the battery status LED.
    After some months of use my MBP died outside USA. I got it checked in Apple verfied Service centre and was told that logic board was faulty.
    After I came back to US I took my MBP to Apple store and was told that there is liquid damage in the system. My question is that if there was liquid damage why did my MBP stop displaying the battery status right after  the battery was changed secondly why didnt the apple verified Service centre tell me that there was liquid damage afterall I paid them the money for diagnosing the problem.
    Is there a process i can followup on this problem

    These are question you would need to ask that service center.
    This is a User to User forum. No Apple employees here.

  • USB-CDMA Modem won´t work after shut dowen by my PB

    I´m using a VTION V1810 CDMA modem to connect to the Internet when travelling.
    Works fine, only after the connection is shut down by either the PB or due to inactivity timeout after 30 min, I can not connect anymore.
    I tried several procedures like connecting to another USB port, setting up a new connection and so on.
    Just after some time if the device is not plugged in, I get lucky and it connects again as if there was no rain in this world...
    Any ideas?
    I already learnt that I always have to connect it to the same USB port, and that it is luck if it works over a hub.

    Sorry, I was not clear enough. The modem had a problem that involved it not hanging up. I wondered if there might be a similar process that was occurring with the CDMA modem.
    With the CDMA modem I use, there was no script/driver but I connect using the "null modem 115200" setting (in modems). I see there are a few other modem settings in there.
    As a point, have you updated the OS recently? Sometimes this will mean that a driver does not integrate properly and we would have to wait until the maker updates the driver too. It might be worth your while to try the other settings.

  • SA 540 drops wan connectivity after some time interval

    hello guys,
    I have problem.  after a certain period of time (ranging from 2 minutes to several hours) the unit keeps dropping the WAN connection, making the unit unaccessible from the WAN side. The strange thing is, that when the connection is dropped, the unit is perfectly accessible from the LAN side, the WAN LED is still on, status info shows the WAN link up, and packet trace shows broadcasted traffic on the WAN interface, so only the directed communication to and from the ISPs gateway (configured to fix IP) seems to be blocked for some reason. When this happens, then plugging the WAN cable to the Optional WAN port enables traffic again, but it is also dropped after some time, and then only power cycling the unit restores WAN connectivity.
    please suggest me as soon as possiblethat how to fix this problem?
    Awaiting for valuable reply.....

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Reset after some predefined time of no activity.

    Hi, we are setting up Firefox as a Kiosk application.
    CU is asking the session would be reset (=firefox restart) after a predefined time of no activity by the user, so whatever page the browser is left, after some amount of inactivity it returns to its home page.
    One way to do that could be to add some extensions to Firefox (https://addons.mozilla.org/it/firefox/addon/616), but I am guessing if there is any timeout value I can set on Sun Ray Server and which is the recommended way to do that.
    MTIA

    Thanks for your answers.
    I've been tracing the execution and I've found out that I don't get that exception (sorry, when I said I got it, it was due to a different matter). In fact I don't get any exception at all, but it doesn't work out.
    I've been checking my code and don't close the socket myself at any point and the other end doesn't close it, either. I have no clue about what the reason of the problem is: it just stop answering.
    I'm working on sending PING messages to the client so it isn't inactive so long. Perhaps this will solve the problem, but I still wonder what the cause is.
    Can you give any advice?

  • Windows 7 64-bit hangs completely after some minut...

    Hi all,
    My Windows 7 64-bit machine hangs completely after some minutes using Nokia Suite 3.3.89 connected with a E72 through USB cable.
    When connecting, everything goes fine and I can usually synchronize data successfully between the E72 and computer. I can also connect to Internet successfully through the E72 modem.
    However, after some minutes (usually 4-5), the computer hangs completely, with the screen frozen and beign completely irresponsive to any mouse or key input.
    The only way to unlock it is to press the computer On/Off key and restart it completely.
    Has anybody experienced this issue?
    Thanks

    Hi Roberto,
              I too faced the same problem and I too use Windows 7 X64 bit, when ever i open Nokia Suite and maximize it, my screen turns completely Grey/White and nothing works including ctrl+alt+del and I would need to force reboot using the reset button this is really frustrating! I have already checked the display drivers, updated drivers but again same issue and I reinstalled nokia suite as per your suggestion in the above thread but no use  please suggest a permanent solution for this!
    Thanks & Regards,
    Pradeep

  • Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hello:
    I am not being critical, but you seem to want Safari to behave exactly like Chrome.  Every software developer has a plan.  Sometimes features in one product parallel other products - sometime not.  There might be some things available that would help you.  Do not hold your breath, however, for suggestions from people who use these forums.  Most of us use (and like) Apple products.  If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
    Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
    I use Safari (and have for years).  I use Firefox (not a bad product) as my alternate browser.
    Sorry for what appears to be a pedantic lecture.  However, I think most of us adapt to different products if we really want to use them.
    Barry
    Message was edited by: Barry Hemphill

  • In the OOTB comments component of CQ5.4, the comments are getting posted after some delay.

    We are currently working on CQ 5.4 and have configured two publish instances with one author. We are also using IIS 7.5 as a dispatcher and load balancer (as there are 2 publish instances). We are using the OOTB comments component. Whenever we are posting a comment in publish, sometimes, the comment is not appearing immediately, we have to refresh the page and then the comment appears(after some delay). This creates the impression that the comment is not posted and hence causes confusion. Is it because we are using 2 publish instances that is causing this delay? Please let us know how can the comments appear immediately without any delay and without explicitly refreshing the page?

    The issue most likely is that you are using two publish servers. Assuming you have the workflows set up for no moderation and immediate availability of the comment then most likely what you are seeing is the impact of reverse replication. When a comment is posted it is stored on one of the publish servers, and then is replicated back to the author server using reverse replication. On the author server a workflow kicks off and the comment is then activated to the publish servers, and dispatcher cache is flushed. Its been a while since I used 5.4 so I am not sure if the comment AJAX is dispatcher cached or not. If the comment AJAX isn't being dispatcher cached then you could set up sticky sessions on your load balancer that is in front of your publish servers and you would probably end up seeing the post immediately. Sticky sessions might not work however if the comment code is checking status - it might actually be waiting for the comment to be replicated back out by the author server - I am not 100% sure. But it should be easy to try the sticky sessions option.
    Most of solutions would involve a customization of the comment functionality. I have a client where we overrode the comment posting actions and then had the JavaScript dynamically add the comment data into the DOM rather than refreshing the page/comment list. This gave the appearance of the comment being immeditely available.

  • TPM Error ID 13 and 516 occuring after some time

    Hi all,
    on my TP X301 a TPM error occurs always after some up-time. I get error IDs 13 and 516 in the Windows Error Protokolls. This is leading to an unusuable  Client Security Password Manager. Client Security then tells me that the communication with the TPM-chip is blocked...
    The Windows online Help for these IDs suggest me to replace the TPM hardware. I do not believe it is a hardware problem since fingerprint reader is working fine....?
    Anybody got a suggestion on this?
    I got vista x64 running.
    The error information in German is:
    TPM Error ID 13: "Beim Gerätetreiber für das Trusted Platform Module (TPM) ist ein nicht behebbarer Fehler in der TPM-Hardware aufgetreten, der die Verwendung der TPM-Dienste (z. B. Datenverschlüsselung) verhindert. Wenden Sie sich an den Computerhersteller, um weitere Hilfe zu erhalten."
    TBS Error ID 516: "Fehler bei der Kommunikation mit dem TPM. Vom Treiber wurde 0x8007045d zurückgegeben."
    ThanX a lot in advance.
    St.

    Here is an explanation of the failure:
    1. Prioritized replication was introduced with DS6.0;
    2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
    3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
    A work-around:
    Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
    pwdIsLockoutPrioritized:FALSE
    Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
    1. The default password policy at any DS6 instance (cn=password policy,cn=config);
    2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
    3. Any password policy added to a DS6 instance.
    Additionally, do not set any prioritized replication rules for other attributes.
    It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
    Contact Sun support for the status of a fix for the bug. The CR is 6645742.

  • After downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    after downloading ios 8 on my i pad air 16 GB, my i pad keeps on restarting on its own after some time?  any idea how can it be rectified?

    Please tell me that it has NEVER been jailbroke.  If it has not been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • TS1702 ios 6 not updated in my new i pad, when i tried to update my i pad after some time a error massage shown and download stoped, same thing happen in i tune , i talked to apple customer care india , aftre talked them i disable my window firewall , and

    dear all i have facing promblem when i download ios 6 in itune, as well as in ipad, when i start download after some time or after 200 to 300mb it stop, and a error msg shown , i have talked to apple india cutomer care and after that i disabled my window firewall, and as well as my antivirius and i also disabled my modem firewall but after that still i m unable to update my new ipad with ios 6

    There is nothing in that other thread that clarifies what you did about Error 3014
    Here is the description of that error:
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • Replication DS6.2 - DS5.2 stops working after some time

    Hello!
    After weeks of unsuccessfully trying to solve a replication problem, I hope that someone of this forum can give me a hint.
    I have 2 masters DS5.2 and two masters DS6.2.
    Replication is working fine for some days. E.g. last time the replication was working until 29.11.
    But at some point the replication stops working and I get the following errors in the errors log:
    [28/Nov/2007:10:51:16 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d3d84000002bd0000, s
    equence number 1, ignoring it
    [28/Nov/2007:12:48:09 +0100] - WARNING<10288> - Repl. Transport - conn=-1 op=-1 msgId=-1 - Replay of an already seen operation csn 474d58e9000002bd0000, s
    equence number 1, ignoring it
    [28/Nov/2007:19:06:55 +0100] - INFO: 29398 entries in the directory database.
    [28/Nov/2007:19:06:55 +0100] - INFO: add:107, modify:0, modrdn:0, search:3651, delete:0, compare:0, bind:2763 since startup.
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474eb18e00001a360000
    [29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:18:38 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:34:05 +0100] - WARNING<20805> - Backend Database - conn=328186 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
    objectClass=*)' scope='sub'
    [29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:13:58:10 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:15:45:46 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474ed41b00001a9a0000
    [29/Nov/2007:15:46:03 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    Since the replication was not working I had to initialize the DS6 masters again:
    [29/Nov/2007:16:03:59 +0100] - import hvb: Index buffering enabled with bucket size 76
    [29/Nov/2007:16:03:59 +0100] - import hvb: Beginning import job...
    [29/Nov/2007:16:04:20 +0100] - import hvb: Processed 14166 entries -- average rate 674.3/sec, recent rate 674.2/sec, hit ratio 0%
    [29/Nov/2007:16:04:41 +0100] - import hvb: Processed 22598 entries -- average rate 525.5/sec, recent rate 525.5/sec, hit ratio 100%
    [29/Nov/2007:16:05:03 +0100] - import hvb: Processed 31591 entries -- average rate 493.6/sec, recent rate 405.4/sec, hit ratio 100%
    [29/Nov/2007:16:05:05 +0100] - import hvb: Workers finished; cleaning up...
    [29/Nov/2007:16:05:17 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Replica (dc=hvb,dc=de) has been initialized by total protocol
    as full replica
    [29/Nov/2007:16:06:56 +0100] - WARNING<20805> - Backend Database - conn=334334 op=1 msgId=2 - search is not indexed base='ou=people,dc=hvb,dc=de' filter='(
    objectClass=*)' scope='sub'
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - csnplCommit: can't find csn 474ed92e00001a360000
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - ruv_update_ruv: cannot commit csn 474ed92e00001a360000
    [29/Nov/2007:16:07:42 +0100] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - replica_update_ruv: unable to update RUV for replica dc=hvb,d
    c=de, csn = 474ed92e00001a360000
    I tried to change a password. But the replication failed again and since than the replication is working again.
    [29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    [29/Nov/2007:16:07:42 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [dsmmucqsu05.sys.hypo
    vereinsbank.de:636]
    But I'm sure that after some days there will be a problem again.
    Sometime there are also the errors:
    [29/Nov/2007:16:27:05 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
    SN 474ed8d5000002590000, DB error 5 - I/O error
    [29/Nov/2007:16:27:05 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
    ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
    [29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    [29/Nov/2007:16:27:05 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    [29/Nov/2007:16:27:06 +0100] - ERROR<8264> - Replication - conn=-1 op=-1 msgId=-1 - Internal error Failed to position cursor in db at C
    SN 474ed8d5000002590000, DB error 5 - I/O error
    [29/Nov/2007:16:27:06 +0100] - WARNING<10258> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Changelog error A database error is encou
    ntered while servicing replication agreement "dsmmucqsu08.sys.hypovereinsbank.de:10636/dc=hvb,dc=de"
    [29/Nov/2007:16:27:06 +0100] - ERROR<8221> - Incremental Protocol - conn=-1 op=-1 msgId=-1 - Failed and requires administrator action [d
    smmucqsu08.sys.hypovereinsbank.de:10636]
    I tried to reproduce the problem.
    At the moment everything works fine and I can do many changes.
    But I know that there is somewhere a problem and the replication will stop working again in the next days.
    Can you give any advise?
    Regards,
    Beate
    Edited by: 72716 on Nov 30, 2007 10:05 AM

    Here is an explanation of the failure:
    1. Prioritized replication was introduced with DS6.0;
    2. When a suffix at a DS6 instance is initialized from a DS5 instance, and then an operation is performed at the DS6 instance that uses prioritized replication, replication fails;
    3. By default, password policy uses prioritized replication to propagate auth-failure-lockout state updates (e.g., adding a pwdFailureTime attribute value on a failed bind attempt);
    A work-around:
    Disable DS6 supplying auth-failure lockout state using prioritized replication. In any password policy having auth-failure-lockout enabled, set
    pwdIsLockoutPrioritized:FALSE
    Note that DS6 enables prioritized lockout by default, in particular, it enables this feature when migrating a password policy received from a DS5 instance. Hence, for this workaround to be effective, the prioritized lockout feature must be disabled in any DS6 password policy that has auth-failure lockout enabled, which could include:
    1. The default password policy at any DS6 instance (cn=password policy,cn=config);
    2. Any password policy originating at a DS5 instance, including those in data imported into a DS6 instance, received via replication total update initialization, or added at the DS5 instance subsequent to the DS6 instance initialization;
    3. Any password policy added to a DS6 instance.
    Additionally, do not set any prioritized replication rules for other attributes.
    It is possible the bug can still be triggered in the case of a DS6-only topology that was initialized from DS5 data.
    Contact Sun support for the status of a fix for the bug. The CR is 6645742.

  • Yosemite: slow after some time

    This is my problem: Yosemite goes slow after some hours i started the system.
    I have to relaunch the operationg system to let it go normally.
    Anyone knows if it's a bug or just a personal problem?

    Found these errors in dmesg while transfering files:
    AppleYukon2 - bad packet received. length: 395, packet status bits: MII error
    AppleYukon2 - bad packet received. length: 1475, packet status bits: MII error
    AppleYukon2 - bad packet received. length: 1514, packet status bits: CRC error
    AppleYukon2 - bad packet received. length: 1514, packet status bits: CRC error

  • Apple Modem will not answer after Time Machine Restore

    After restoring from a Time Machine backup the Apple External Modem no longer answers incoming [fax] calls. I verified all modem/fax settings - they are good and the same as before the restore. The Modem Status in the Menu Bar doesn't indicate "ringing..." when the line is ringing and the Fax no longer answers.
    Opening the Console I see these errors repeating endlessly-
    9/15/08 10:09:10 AM com.apple.service_helper[1271] com.apple.efax: Already loaded
    9/15/08 10:09:10 AM [0x0-0x15015].com.apple.systempreferences[155] No matching processes were found
    9/15/08 10:09:27 AM com.apple.efax[1274] /usr/bin/fax: line 537: cd: /var/spool/fax: No such file or directory
    I believe the fax app is supposed to create this dir, but I created the dir in /var/log/ as follows:
    drwxr-xr-x 2 root wheel 68 Sep 15 10:33 fax
    Makes no difference, rebooted, still makes no difference, ran disk utility to see if it would change permissions, no it didn't - still getting the errors, so there's something else that's also missing after a restore, or the error message is erroneous since the dir now exists.
    It appears a Time Machine Restore - doesn't restore all that's needed for the fax subsystem to work. I thought the restore was supposed to completely restore the volume to previous operating state?
    Any help on this would be great, I now have no incoming FAX - one of the main jobs of this Mini - thx - KR

    By the way, it's running OS X 10.5.4

Maybe you are looking for