Modem won't work with router

I apologize if this is in the wrong forum, but this one seemed to be closest to my problem.
I can't get my modem to work with a router; Apple Airport Express, Asante' FR1104-G, Linksys BEFW11S4, none of them will work with my DSL modem (Westell B90-210015-04) either through ethernet or AirPort.
It worked fine untill a couple of days ago, then nothing. I can however connect to the internet directly by running a ethernet cable directly from my modem to my computer. I heard that downgrading to Airport Express Updater 6.1.1 from 6.2 might help, but no dice. I've tried to reset all routers and redo my internet settings but no luck there either. I can talk to my routers from my comp, but cannot complete the connection to the modem. I even went to the extreme measure of contacting Verizon, but they are of absolutly no help at all, suggesting that all three of my routers must have gone wonky at exactly the same time.
I'm at a loss here and any help at all would be appreciated, thanks

My westell modem is very flakey and will often reset its connection from PPOE to bridge all by itself. From what I read on the web, setting the westell to bridge is the way to go since it allows the router to actually route. But, for me it only works when sent to PPOE. That means that the westell is both a modem and DNS/NAT router so I disabled those capabilities in airport. The verizon dslstart.verizon.com has some help on how to do this. search on westell 6100.

Similar Messages

USB modem won't work with Panther

My girlfriend has a black G3 powerbook and uses a Speedtouch 330 USB modem successfully on OS9. However I have also installed Panther 10.3.9 and installed the Speedtouch Panther driver update from their site but when I open the Network preferences panel Speedtouch USB does not come up as an option.
If I go to the list of modems it is there but if I select it it still doesn't work.
In the past I have used a USB modem with my G4 and Panther and after installing the driver it immediately appeared as a new connection option called Speedtouch USB and it worked fine.
I have tried reinstalling the driver several times. I have spoken to Apple and I have spoken to Speedtouch with no result.
I can only assume that it is something to do with the black G3 compatibility.
I have done a test with her powerbook in Panther and plugged in my ethernet router and it works fine.
But these routers are quite expensive and it bugs me... why won't Panther recognise the USB driver?
Any suggestions please ?
thanks
Pete
London, UK

My westell modem is very flakey and will often reset its connection from PPOE to bridge all by itself. From what I read on the web, setting the westell to bridge is the way to go since it allows the router to actually route. But, for me it only works when sent to PPOE. That means that the westell is both a modem and DNS/NAT router so I disabled those capabilities in airport. The verizon dslstart.verizon.com has some help on how to do this. search on westell 6100.

Arris TG862G Modem won't work with Messages

Here's a very strange and frustrating bug for you! A friend of mine was having trouble with her iPhone 5 using iOS 6.0.1 and Messages. She could send pictures via Messages, but only when not at home. After days of troubleshooting, we finally discovered that the culprit was her Comcast provided Arris TG862G cable modem. This particular modem is newer with telephone and wireless capabilities. For whatever reason, pictures can not be sent through Messages using that modem. Works fine through email and 3rd party apps, works fine on cellular data, but will not work on wifi provided by that particular modem. We tested various setting changes and resets, plus other modems and they gave us no trouble! Anyone else experience this one?

Updating my family's iPhone 4 and 5 to IOS 6.1 solved the iMessage problem for me using a Comcast / Xfinity Arris TG862G/CT all in one cable modem / router (gateway) / Wireless Access Point (WAP). It also solved a similar problem accessing Chase Mobile (Banking) app on both iPhones via Comcast Xfinity WiFi; always worked fine over non-Comcast WiFi, 3G, and 4G LTE, just not Comcast WiFi.
Oddly enough the identical problem still exists with the Chase Mobile app on a Motorola Droid 4 running Android 4.0.4 over the same Comcast WiFi network, but works fine on other non-Comcast Wifi networks and over 4G LTE. I have already seen the finger-pointing on this between Comcast, Google, and Motorola on who is responsible. Kudos to Apple for resoling it with IOS 6.1 for iPhones.
Message was edited by: Gray Bison

Option 3G modem won't work with 10.5.5!

Hello all, I've been trying to find a way to contact Apple directly (by email), but wasn't able to find any, so I thought it would be clever to post here, in case any one happens to wander by.
I'd simply like to report that the 3G modem labeled "Qualcomm 3D CDMA" by Option has gone missing from the newest version of OSX, 10.5.5. In 10.5.4, I could simply go to the Network settings, add a new device, and in the list of available modem drivers go and select "Other - Option 3G modem". Now Option has it's own category in the list of manufacturers, but it is empty except for a GSM modem with the preset APN "isp.cingular" (Other countries with different service providers? In my network settings?).
The software I use to connect with still recognizes the modem perfectly, and connects as well. Alas, OSX refuses to believe that my computer is connected to...anything, really, and promptly gives me a 404 error upon trying to reach any website.
Dear Apple, please resolve this problem if you could muster the time and energy to do so. I have already contacted my service provider about this, and I hope that we all can reach a fitting solution.
Yours truly
the rest of the world

Okay, I've seen this message mentioned many times in this forum. The UFR2 Backgrounder service does need to communicate with the printer in order for the driver to print. Failure will cause the error message mentioned.
If you open Print & Fax, select the MF and then open Options & Supplies, under the Utility tab is Open Printer Utility. This will open the UFR2 Printmonitor application. I would expect this to error at first (and if you watched Activity Monitor you would see the mcc service using resources) but after the error pane is displayed you should be able to press the Printer menu in UFR2 Printmonitor and select the MF4350. If it is not showing under the Printer menu then select 'Search for Printer'. After a couple of seconds press the Printer menu again. The MF4350 should be listed with a USB icon next to it. When this does happen then you should be able to print.
With regards to the Vista, the UFR2 driver and ScanGear function differently on Windows compared to OS X so it is not surprising to read that is working fine. And it is worth noting that if there is an application that is impacting the Canon OS X software from connecting, the same apps usually don't stop the Windows versions of the same apps. Why the Canon engineers needed to put such heavy reliance on the backgrounder service for Mac is questionable.

2-wire modems don't work with Apple?

Never had an Internet problem until I moved 3 weeks ago. Since then my 12 mbps signal drops constantly. AT&T Uverse have been to my new house 20 days straight trying to fix it (their monitoring shows the signal drops [goes away] sometimes every 2 or 3 minutes, ever since they connected it 20 days ago). They have rewired my house (new cat5e drops, everything from the street to the house to the RJ45), and also redid fiber-to-copper-to-street from telephone poles. (I don't know the technical terms, but that's the gist of it, as they explained it to me.) The AT&T guy says 2-wire modems won't work with Apple computers, and that might be the actual cause of the problems. I find that hard to understand, since I had the same modem also using Uverse at my old address, for four years, with no problems. So they've added a Cisco router, creating a second wifi within my house. Now I get steady signal with Cisco, but it's 3.4 mbps.
I now am having problems streaming already-rented movies to my AppleTV. The one I tried to watch tonight stops every 5 minutes or so and buffers for at least another 5 minutes each time. That makes it tough to watch the movie.
Does anybody know if this buffering issue is because of slow wifi? Or is it related to wifi at all? If not, what else could it be? I started this movie about 2 hours ago, so I now have 22 hours left on the rental, and at this rate I'll be up all night trying to watch it.
Thanks.

I've used U-verse and the same 2-Wire modem for 4 years without any problems. I am about 1800 feet from the VRAD (box, usually on a street corner, that connects the last mile copper to the fiber which goes to the CO).
So you have to ask U-verse just how far are you from the VRAD. The service does degrade somewhat the further you are from the VRAD (limit about 3000 to 4000 feet) and of course the quality of the copper between you and the VRAD.
Also, for questions like this, which are more U-vers problems than mac problems I suggest posting at the two primary U-verse forums:
AT&T U-verse Forums
Uverseusers.com

Casio Camera won't work with SL

My Casio EXZ850 camera doesn’t work with Snow Leopard.
Used it with Windows XP & then with Leopard just fine. When connect to USB ports not recognized by Mac. I checked System Profiler.app & under USB it is not listed. Casio Support is no help. They say it won’t work with anything above OS X 10.4 which is incorrect as I used it with 10.5 for over 1 year with no problems.

I take it that you ahve the IP set to static, or have a MAC address DHCP reservation for the camera, network settings OK.
WHat was the wireless authentication on the old router and what are you using on the new 4200?
Is it possible the camera does not support the encryption used by the 4200, i.e. wpa2-personal?
Have you tried WEP to see if the camera will work then?

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

TS1363 "An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

"An iPod has been detected but it could not be identified properly" iPod Nano 7g and 3g won't work with Windows 8 PC. worked fine up until a month or so ago and now they are not recognized.

Hi cueball819,
Thanks for using Apple Support Communities. This article has steps to try if your iPods aren't recognized by iTunes or Windows:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and it still won't open. Says the itunes library won't work with the older program. Help

Itunes updated and now it won't work. I unstalled it and reinstalled the older version and reinstalled a older version and it still won't open. Says the itunes
library won't work with the older program. Please help

It says it cannot removed the older version of iTunes.
Doublechecking before proceeding ... what's the precise text of that message, please? (There's a couple of different ones I can think of that you might be getting.)

I would like to update to Firefox 5.0.1, but I can't due to, too many things won't work with the version & will be disabled.

I have wanted to update from 3.6.22, to 5.0.1, but can't do to the following reasons: I can't due to, too many things won't work with the version & will be disabled. They are: Microsoft. NET Framework Assistant 1.2.1, Iconix 3.90.1, HP Detect 1.0.5.1, Yahoo! Toolbar 2.3.5.201101200332202 (I don't care about Yahoo! Toolbar, because I don't use it!). As soon as these issues are fixed, I will be able to update, to the latest versions. These issues should be fixed & ready to work, before a new version is available. Thank you!

Try using this extension to force compatibility.
* https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Check and tell if its working.

I have a Canon D60 camera, my raw files won't work with the raw converter in my Photoshop CS5. Do I need CS6?

Photoshop CS5 won't work with the raw files from my new Canon D60 camera. Do I need CS6?

A Canon EOS D60? It had support since Camera Raw version 1.0.

FM transmitter won't work with my iPhone

I bought a Premier FM transmitter from Auto Zone the other day. It has a 30-pin connector with an led panel that lights up when you connect it to an apple device. It's suppose to work with all 30-pin devices but doesn't work with my iPhone 4 (iOS 7.1.2). I have tried it with my iPod Touch 2g and two other iPhone 4's that belonged to my friends, and it worked with all three devices. Any explanation why it won't work with mine?

"the Middle East" is a really big place. I suspect you bought a gray market hacked phone. Call Apple Care and give them the serial number. Maybe they can tell you if it's locked and to what carrier.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

RoboHelp for Word installed from RoboHelp 10 won't work with Word 2010

I have a Help project created in RoboHelp for Word 8. I recently upgraded from Word 2007 to Word 2010 and discovered that RH8 for Word won't work with Word 2010. So I purchased RoboHelp 10 and have installed RoboHelp for Word from it. Alas, RH for Word STILL won't work with Word 2010. When I try to open my project, I get this message:
Before I bought RH10, I live-chatted with an Adobe sales person who assured me it was compatible with Word 2010.
BTW, I tried to roll back to Word 2007, but I was getting weird behavior running Word, so I have reinstalled Word 2010 and want to stay there.
Any ideas?

I have just installed Rh10 for Word on a new machine and initially I got this message.
I wonder if you have followed those instuctions? I changed the setting to Enable All.
The other possibility is what do you have set for the default version? If it is 2007 and that no longer exists on your machine, then Rh will not be able to proceed. The dropdown should show 2010
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Modem won't work with router

Similar Messages

Maybe you are looking for