Moderate to open back and forth NAT issue

I'm trying to play on Xbox Live but I've been having to reset my router everyday to create an open Nat. I've talked with customer support for Verizon and Actiontec. Verizon set me a new router, which solved nothing, but aside from this I've not been able to reach someone who could understand port forwarding or why I would want to do it.
My issue is that I would like to forward the necessary ports once, keep them forwarded, and not have to reset (sometimes to factory specs) every day. To be clear, I've set up the forwarding but it is as if the router does not recognize the parameters until it is reset. Sometimes my nat will change during the middle of gameplay as well. This has been very frustrating so any help you can offer would be great because I'm not getting it from the phone techs.
Specs:
Actiontec MI424WR rev. l. firmware:40.19.36
Xbox 360 wired to router
Fios 75/35
Ports Forwarded 3074 both, 53 both, 80 TCP, 88 UDP (yes they are set up correctly)
Static IP set (yes it is set up correctly)
Additionally, Xbox Live's website notes a bug in the MI424WR that causes nat switching. The solution is to go into the upnp settings, however, access to upnp is not available in rev. l's firmware.
http://forums.xbox.com/xbox_forums/xbox_support/networking-hardware/01-modems-gateways/actiontec/f/3...
Solved!
Go to Solution.

From http://forums.verizon.com/t5/FiOS-Internet/mi424wr-gen3g-with-hardware-version-g-doesn-t-have-upnp/t...
UPNP was hidden in this release software. Fortunately it's there, but you have to know the direct URL.
Firmware 4.19.36
UpNP hidden Menu
http://192.168.1.1/index.cgi?active%5fpage=900
IGMP proxy Hidden Menu
http://192.168.1.1/index.cgi?active_page=6059
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Firefox opens with no address in the address bar and no back and forth functionality

This happens very often (not every time) I open Firefox: there is no address in the address bar (normally, I would have my homepage address) and the back and forth arrows do not work until I open a new tab. It's a very odd behavior that lasts for a while every time I open a new browser page and causes crashes sometimes... I have saved the error console message if you need to see it. Thanks!
== This happened ==
Every time Firefox opened

Hi,
Add-ons can sometimes cause odd behavior in the Firefox UI. If you have any installed, you can try disabling them and seeing if this resolves your issue. You can do so from Tools > Add-ons. In particular, the Illimitux add-on is experimental and has some known issues. Let me know by replying to this message if you have more questions. Thanks for using Firefox.
-n.

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

Premiere CS6 and CC: any compatibility issues working back and forth between both versions?

Hello,
What are the compatibility issues with Premiere CS6 and CC versions? Can the user go back and forth? I run a computer lab at a college and we will be upgrading to CC but many students will still be using the older CS6 version of Premiere until we update all the computers.... Will students run into problems?
Thanks,
dmichael

My concern is going back and forth between the versions... I read somewhere there are compatibility issues with Premiere....Can the user working in CC go back to premiere CS6? and vice versa?
Thanks,
dmichael

How do I keep multiple windows open and switch back and forth?

How do I keep multiple windows open and switch back and forth?

billyg27,
if you hold down a Command key and press the Tab key, it will show a set of icons representing your currently opened programs. Press Tab until you arrive at the program you’d like to switch to, and then release the Command key.

When I open certain emails the scroll bars at the side and bottom flash and jump back and forth along with the email content

I recently upgraded to the latest version of Yahoo mail. Ever since then when I open certain emails the scroll bars jump back and forth and flash. This happens when I open my AT&T bill or something from Amazon for instance. A message appears at the bottom such as "Transferring data from mail.yimg.com", or "us.bc.yahoo.com". This doesn't happen when I use Safari.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
*Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
*http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Is there a way to have Safari not reload the page when moving back and forth?

I really like being able to swipe back and forth in Safari, however when I do this, it reloads the page. Why? Can't it just used the cached content? I understand that my view my be 'outdated', but I could always manually refresh if I wanted to.
The reason I want this is because when you swipe back, it takes a few seconds before you can actually scroll the page while you wait for it to load, which is annoying

Might be a cache issue ...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

When I start it up it shows two two nested windows on the screen, has a Firefox yellow tab in the corner, does not display the toolbar bookmarks, the back and forth buttons do not work and there is no page refresh. No clue what is going on.

Every time I open up Firefox it appears to open two nested and linked windows, each with their own minimize, maximize and close buttons but the both work the same. The homepage does not come up, the back and forth buttons do not work. Both the refresh button and F5 do not work. The Bookmark Toolbar does not show up until I disable it in View and then re-enable it and this causes the outer nested window to disappear or close.

This issue can be caused by an extension or theme that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

How to I get back my web address bar, bookmark and back and forth bottons

my web address bar and back and forth bottoms and my bookmark bottoms have disappeared from my browser I can't use firefox without these How do I get them back

'''Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help) , see: 
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
* Press F10, Menu bar will appear, click View, click Toolbars, click Menu bar
* Press ALT, the Menu bar will appear, click View, click Toolbars, click Menu bar 
* Hold down the ALT button while pressing V+T+M
'''Navigation Toolbar''' (Back/forward, Refresh...Home, URL/Location Bar, Search Bar): Do one of the following
#click View > Toolbars, click on "Navigation Toolbar" to place a check mark, OR#right-click the Menu Bar, click "Navigation Toolbar" to place a check mark. See: 
#*https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing
#*http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
#*http://kb.mozillazine.org/Toolbar_customization
#*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
#*http://support.mozilla.com/en-US/kb/Navigation+Toolbar+items
'''Bookmarks Toolbar''': Same procedure as Navigation Bar except click "Bookmarks Toolbar". 
'''Status Bar''': click View, click Status Bar to place a check mark 
'''Full Screen Mode''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen 
Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
 
The information submitted with your question indicates that you have out of date plugins with known security issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post.
* Adobe PDF Plug-In For Firefox and Netscape
* Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#**On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#**If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link and more information''': https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#*After the installation, start Firefox and check your version again.
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions
#* After the installation, start Firefox and check your version again.

The back-and-forth bar does not come back when I reset to defaults. This problem is not solved.

I have attempted to get my back-and-forth navigation bar back as your website suggested, i.e., View/Toolbars/reset defaults, but it has not corrected the problem.

Have you tried any of these:
http://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+buttons+are+missing
http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar
Is your Navigation Toolbar showing?
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''Julia'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Converting back and forth from CS4 to CS3 inDesign

Hi I have a favorite designer who only has CS3 -- I am working in CS4. We are working on a 200page book design layout and cover togehter. What are the risks of going back and forth? We did a test from me to her CS4-CS3 via INX. She could open the file just fine. This is a relatively simple text book with some Jpeg diagrams. Can the formatiing start jumping around -- or is the problem more in new advanced features in CS4.
thanks for any help Michael

Any of those scenarios will probably work. The reflow issue is that there are differences in the text engines between the versions.
When your designer opens your .inx file, the text is automatically recomposed and some line endings might change. This can cause the line count to change for a block of text and result in an overset situation or a new wido/orphan problem. Your designer wouldn't see your original line endings.
Conversely, when you open the CS3 file none of the text is recomposed until you start to edit, and then that story will recompose. You see the CS3 composition until you edit, or force a recompose using the Alt (Opt) + Ctrl (Cmd) + / Keyboard Shortcut, which is a recommended first step if you exchange files like this to avoid surprises late in the process.
The major points here are that sending files round trip is subject to text reflow which may or may not be critical (but you'll need to look at every page carefully to catch things like forced line breaks that no longer fall at appropriate locations and oversets or keeps problems) and you'll have to limit yourself to using only features supported in CS3 up to the point where it will remain in CS4 for finalization.

Can you move files back and forth between an iPad and a PC using iTunes?

If I read this article correctly, http://support.apple.com/kb/ht4094 I should be able to connect my iPad to my PC, fire up iTunes and then on the Apps tab in iTunes I should be able to click on an app, Pages for example and then just drag files onto the Pages Documents column from a Windows Explorer window.
This is great. I was hoping to use DropBox but it is such a hassle I don't know why people are so thrilled with DropBox on iPad. If I can just move files back and forth using iTunes that should be fairly easy. I wish there was a way to just upload my files to iCloud from my PC but the iCloud control panel app for Windows only seems to connect Outlook, Photostream and Bookmarks. I want to be able to just carry my iPad and not have to deal with a computer.
I thought that they said that you didn't need to have a computer to have an iPad. I guess if you have a computer and then GET an iPad its a different story, unless you have a Mac of course.
Anyway my question is: can you move files back and forth between a PC and an iPad using just iTunes?

I still need to do some trial and error testing with DropBox and my iPad. But can I link my iPad to my DropBox account so that I can always see the files on DropBox when I open Pages on my iPad? I just want one place to store my documents, and iCloud doesn't seem to be up to the task when it comes to opening a fil;e, editing it and then saving it back to iCloud. I just want a networked storage location that works like a networked drive on my LAN.
I realize that hollywood and the music industry are up in arms about file sharing on the Cloud which is why so many things are made more difficult than they need to be.

How can I toggle back and forth from a main pdf to its attachments?

I have a main document that I created in word and inserted hypertext to either link to 1) websites 2) a series of appendices, 3) 6 large format pdf maps or 3) a series of reference documents.
In Word, I have everything in a thumbdrive directory with the main file and three folders holding the individual files of the maps, appendices and references. All the links work but the file can't be copied to another drive without redoing all the links to the files (there are about 40 files all together).
I saved the word main document as a pdf. All the auxiliary files are also pdfs. All the weblinks came through in the pdf of the main document but the links to files need to be re-established.
1. I tried to create an acrobat portfolio with the main file and the folders of maps, references and appendices but I can't seem to make links in the main document to open up specific files in the folders.
2. I compiled all the files together into a binder and tried to use bookmarks to link the main part of the document to the first page of the 40 supporting files but at 700 pages the document is just too cumbersome to recreate the ~100 bookmarks I would need to add.
3. I tried adding everything as attachments and created links but once the link is activated from the main document and the new window opens, the main document has closed up. I need the reader to be able to toggle back and forth between the screen with the main document and the supporting documents.
What I am trying to create is one main document with links to the maps, appendices and references that will open a new window when each link is activated. Then the new window can be closed and the reader is back at the screen of the main document on the page with the link they just used.
This doesn't seem to me like it should be difficult since it almost works in Word except for the file structure.
I would really appreciate any guidance on how to make this work. The document and supporting files have already taken more than a year to put together and I'm stuck at this last step.

I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
I happen to think it's a pain to click twice on files when I'm used to clicking just once.
But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

On my imac, All of a sudden I am unable to send original emails with any attachments. I can attach the file but when I try to send it, it won't send. Also, if I am emailing back and forth as it gets longer, it no longer transmits

On my imax, all of a sudden I am unable to send original emails with attachments of any size. I can attached the file but when I try to transmit, it will not go.
Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit. Any suggestions. I am using gmail in the apple mail system

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Back and Forth Logic in process-controlled (BRF) workflows in SRM 7.0

Hi all,
I am using the process-controlled workflow in SRM 7.0.
The approval itself works ok, but now I am trying to set up the back-and-forth functionality (similar to how it worked for the Badi in SRM 5.0) as default:
This is what happens:
Requester creates shopping cart.
Shopping cart goes for approval.
Approver rejects SC.
Back at the requester the SC can only be displayed, but not changed.
As far as I can tell this happens for any kind of decision set (as long as all items are rejected).
This is what I am trying to set up.:
Once the SC is back at the requester, he can either accept the rejection OR change the SC and 're-order' it ie send it back to approver again.
I know if the requester checks the flag 'Work Item to Requester at Process End' this can be done, but I need the system to have this functionality automatically without setting a flag manually.
I really appreciate any suggestions on this issue.
Cheers
Ulrike

Dear Masa,
thanks for your helpful answer. I have an better idea now, but I am still not quite able to set it up.
I have applied note 1296209.
When i tried to set up this step I did the following:
level type of that step I used 'Approval with completion'.
Created Expression of type SAP Formula Interpreter, with return type Boolean, and use formula:
0V_WF_CURRENT_DECISI = 'REJECTED'
linked the evaluation id to above expression.
Task id for the step is: 40007994 - Accept Decision / Adjust Document
When i do this and create a SC, my system dumps after clicking on describe requirement::
The following error text was processed in the system SR7 : The method could not be found at dynamic call.
The error occurred on the application server SAP01_SR7_07 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      Method: CALL_RFW of program /SAPSRM/CL_WF_RULE_CONTEXT====CP
      Function: /SAPSRM/WF_BRF_0EXP000 of program /SAPSRM/SAPLWF_BRF_DATA
      Method: PROCESS_SPECIFIC of program CL_CALL_FUNC_METHOD_BRF=======CP
      Method: IF_RULE_COMPONENT_BRF~PROCESS of program CL_EXPRESSION_BASE_BRF========CP
      Method: GET_RESULT of program CL_EXPRESSION_POOL_BRF========CP
      Method: IF_EXPRESSION_BRF~GET_SUBEXPRESSION of program CL_EXPRESSION_BASE_BRF========CP
      Method: IF_FOEV_CONNECTOR~EVALUATE of program CL_FORMULA_BRF================CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
      Method: EVALUATE of program CL_FOEV_FORMULA===============CP
What I don't understand about your explanation is what you mean by "Acceptance by Contact person". I don't have that option anywhere in my BRF? Is that supposed to show up under Resp. Resolver Name (like RR_MANAGER)?
Also where did you add that step in Process level configuration? I have 2 approval steps (just approval, without completion) and then i wanted to enter this step after those levels before the automatic system decision. But i wasn't able as the system doesn't allow you to add a completion step after a 'normal' approval step.
Cheers for your help
Ulrike

Moderate to open back and forth NAT issue

Similar Messages

Maybe you are looking for