Modern firmware and software version not matching
Hi...I upgraded my software version to 5.0.1 and didn't upgrade the baseband. My current baseband is 2.10.04. Would this cause problems? I didn't update the firmware due to turbo issues.
Recently I'm having some problems of 'NO SIM CARD INSTALLED'. Does unmatching of firmware and software version have to do with this ?
your phone is clearly hacked (jailbroken). Not only have you voided your warranty with Apple, but you have forfeited your ability to receive any assistance from Apple, including from this forum. Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll need to search elsewhere for solutions to your problem. Be prepared for the possibility that you have PERMANENTLY disabled your iPhone.
Similar Messages
-
CURRENT Bluetooth Firmware and Software Version Listings
OK, I'm hoping there is someone out there that can provide me with what should be a relatively simple answer. My current machine is an iMac G5 1.8GHz. (Non-iSight), 2GB RAM, and 1TB hard disk running OS X 10.4.11
I'm curious to know what the current, up--to-date version listings should be for both the bluetooth software as well as the bluetooth firmware as displayed under "Bluetooth" in the System Profiler when selecting "About This Mac".
I've been experiencing some bluetooth "weirdness" lately and before I provide any additional information as to the exact problem, I'd like to know if the firmware and software versions are up-to-date first.
Apple doesn't seem to provide a chart to check against (unless I missed it), and other's on the forum have explained that those specs are "model-specific", making it a bit tricky. to determine. So that's why I listed my machine in hopes that someone can tell me what versions should be appearing.
Thanks in advance!
Ed M.your phone is clearly hacked (jailbroken). Not only have you voided your warranty with Apple, but you have forfeited your ability to receive any assistance from Apple, including from this forum. Discussion of jailbroken phones is strictly prohibited by the Terms of Use of this forum.
You'll need to search elsewhere for solutions to your problem. Be prepared for the possibility that you have PERMANENTLY disabled your iPhone. -
Firmware and Software updates not working
Enjoyed you tests on the YouTube site regarding Vado HD? I have now bought one and it's great as you said, I have a problem though I downloaded the updated firmware and Software from this web address:http://support.creative.com/Products...odName=Vado+HDThe problem I am having is when I run the exe's a window opens up with message: supported Vado?HD is not detected, I have tried running them from both my hard dri've on the computer and also from the hard dri've on the Vado HD? question is have you tried to update Firmware and Soft ware? does it work for you? It might help that I bought my Vado in the USA but I am using it in the United Kingdom and have it set to PAL and Europe, could this be the problem? In any case do you think the update is an important one?. Would like to resolve if possible though. Thanks for you anticipated help
I have done the reboot - still the same.
This is exactly what I see when I go to install - maybe this will be of help http://img.photobucket.com/albums/v63/serialthrillaz/Picture2.png
and then i tried running disk utility and i got this -
http://img.photobucket.com/albums/v63/serialthrillaz/Picture3.png
ive also went in single user mode and done the fsck - fy & /sbin/mount -uw thing
i did /usr/sbin/diskutil repairPermissions but it just stood still and didnt do anything (is this normal??) go back to work (apple store employee, yay) tomorrow but i dont really want to drag this down to the bar. so thank you for your help -
Hi,
I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
The Remote Desktop administrator software does not match the installed client software version.
I tried removing the application and reinstalling it to no avail. Any suggestions?
Thanks.
-David J. EisenHi coold88!
I have an article for you that addresses your issue:
Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
http://support.apple.com/kb/HT3596
You will want to make sure you have the latest version of the software as well:
About Apple Remote Desktop 3.7
http://support.apple.com/kb/HT5896
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Please rework the ZEN SDHC functionality with a firmware and software upda
ZEN owners would be very appreciati've if you guys over there at creative would rework the ZEN's SDHC functionality. It would be nice if the SDHC media was displayed in the same gorgeous user interface that the internal memory boasts. One way to accomplish this would be to integrate the SDHC media into the main library. But that would probably require a lot of coding i suppose. Another possibility would be if the SDHC cards file structure and interface to the player was formatted just like its internal counterpart. that way you could access the SDHC media using the same user interface as the internals, and it probably wouldn't be so much work to implement through firmware and software updates.
just some thoughts,
daveI'm almost convinced they won't do it, they would have already told us that they are working on this. Instead of that Creative says nothing.
Some of us think that they do not integrade the SD crad in Zen library, because they will loose money. They believe that if Creative does that, then nobody will buy the 6 or 32 Gb versions, because everybody will buy the chepaer one and pout a high capacity card in it, which will be cheaper.
I do not believe this is correct. Everybody buys somethnig based on his needs. The biggest card available right know I thnik is 6Gb. My music is,let's say, 25GB. I need a 6Gb card plus 9GB of internal memory. The 8GB version won't do for me, so I have to buy the 6Gb version. Creative doesn't loose money. I really can't understand why they don't do it.
I'm fed up waiting for creative to do something about it.Message Edited by Voodooman on 2-6-200704:7 AM -
The Remote Desktop Administrator software does not match the installed Client software version.
The Remote Desktop Administrator software must be upgraded on this computer.
This is the message I have when I installed ARD 3.0 on a new Imac running leopard with no ARD installed previously when I opened up ARD for first time - doesn't let me go any further.
Have I missed something here and made a stupid install mistake??
Many thanks
Message was edited by: art_ikPlease search the discussions before posting as this question has been asked and answered more than once.
If this is ARD 3.x, try this:
• Insert your ARD CD
• Open in Finder
• Right click on the Remote Desktop.mpkg and show contents
• Navigate to contents/installers
• Drag the RemoteDesktopAdmin.pkg file onto the workstation and install
• Run Software Update
• Upgrade to 3.1 admin
Otherwise, you'll have to completely uninstall ARD and then reinstall it. Follow these instructions for the uninstall:
http://docs.info.apple.com/article.html?artnum=108021 -
I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks
You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser. -
i recently have ipad but before i sell it i made a back up of it and by an iphone when i put all the date on my iphone some files and software did not install is there anything i can do to recover the lost data? please help
I don't think you're on iOS 5, I think you're using iOS 6. That's the latest version.
Unless you've used iCloud to back up your documents, you won't be able to restore them. And for future reference, you don't have to uninstall Pages to update your iPad anymore. Sorry about this. -
Storage Breakdown On iTunes and iPhone Do Not Match Up
I will preface this question by providing the following information:
Computer Information
Model: MacBook Pro, mid 2009, 15 inch
Capacity: 1 TB
OS: Yosemite (10.10.1)
iTunes Version: 12.0.1.26
iPhone Information
Model: iPhone 6 Plus, purchased early 1/2015
Capacity: 128 GB
OS: iOS 8.1.2
Okay here's the problem. I was attempting to sync my iPhone 6 Plus with my iTunes library. I have about 50 GB of music which I normally carry around on my iPhone, which amounts to about half of my total storage. On my latest sync, I was told in iTunes that I do not have enough space to complete the sync. Here's what the display looked like:
As you can see:
> The total capacity for audio is displayed as being 49.67 GB (aprox. 6889 songs).
> The total capacity for photos is displayed as being 6.89 GB (aprox. 10,647 photos).
> The total capacity for apps is displayed as being 5.04 GB (aprox. 110 apps).
> The total capacity for other is displayed as being a whopping 45.08 GB.
Upon seeing this, I'm shocked that the other category is taking up so much space. I immediately go to my iPhone to begin trying to eliminate things that could possibly be taking up all this space. When I take a look at my iPhone usage, I see this:
As you can see, the photos and apps are approximately correct, but the songs are way off. In addition, the free space I have on my iPhone according to iTunes is 6.12 GB. According to my iPhone though, I have 47.1 GB (see the screenshot of my iPhone above).
Essentially the storage breakdown on my iPhone and iTunes does not match up. I'm not sure how to fix this problem without restoring the phone, which I want to avoid doing if I don't have to.
Has anyone else had this problem? If so, is anyone aware of a possible solution?
Thanks.If it was an iOS bug I would expect to see it on the 3 devices I have upgraded to iOS 8. I don't see it on any. I would also expect there to be thousands of posts and views about it, as somewhere over 100 million users have updated. This is the only thread I have seen, and you are the only one posting about it.
Go to Settings/iCloud. Turn off Find my iPhone. Then go to Settings/general/reset - Erase all content and settings. Check your "Other". I would expect it to be minimal. -
Accounts and entities do not match data in application OWNERSHIP
Dear experts,
During execution of the legal consolidation package we get the following error:
"Accounts and entities do not match data in application OWNERSHIP"
We have entered the ownership and transaction data.
Could you, please, help us to solve the problem?
Thanks.
MilaThis problem occurs when your Legal application is not in synch with your Ownership.
See below what you have to do to fix this problem.
I am considering you are using BPC for NETWEAVER.
If you are using BPC for Windows, then you gonna have to check some other properties too. ok?
Here we go.
LEGAL APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
USELIM = 1 (if you gonna use US elimination)
VALIDATIONS = 1 (if you gonna use "online" validations entered in Netweaver)
OWNERSHIP APPLICATION parameters must be setup in web, as follows:
ORG_ACCOUNTLIST = METHOD,PCON,POWN
ORG_ACCOUNTOWN = PGROUP
ORG_INTCO = I_NONE
ORG_OWNERSHIPCUBE = OWNERSHIP (or the name of your ownership InfoCube)
ORG_PARENTPROPERTY = PARENT_GROUP
OWNERSHIP_APP = OWNERSHIP (or the name of your ownership application)
After setup web parameters, go to BPC console and check the following dimensions:
(I am mentioning just the ones you need to setup for the consolidation)
C_ACCT
This is your account, and if you are using SAP ECC it should be equal to 0050 accounts of your GL (for example)
In this dimension, you must check the following properties:
ID - NEVER, I repeat NEVER, use lower case letters since BPC is case sensitive.
ALWAYS USE UPPER CASE, FOR EXAMPLE, MY ACCOUNT ID'S ARE: VLD_PL_INV, VLD_PR_INV and so on.....
This is valid for all dimensions or any other ID you gonna create in BPC.
RATETYPE - must setup and must be the ones you gonna use in your RATE application
DIMLIST2 - must use to GROUP your accounts for eliminations or any other automatic adjustment
C_CATEGORY
This is your consolidation categories used to link data you gonna load to your Legal InfoCube.
You must have C_100 for example, for your Actual Version.
You can use the ones that comes with APSHELL C_CATEGORY. It is fine.
C_DATASRC
This is just to TRACK your entries.
Create as many data sources you need and you gonna use.
You can use the ones that comes with APSHELL C_DATASRC. It is fine.
ATTENTION for the following properties:
DATASRC_TYPE - I for input (all the entries, transaction data from txt or ECC) and A for automatic adjustments
IS_CONSOL - Y means that ALL entries in the Legal infocube must be considered for consolidation
IS_CONVERTED - Y means that ALL entries in the Legal infocube must be converted to the GROUP for consolidation
DATASRC_STAGE = Y (allways Y)
ENTITY
ID and PARENTH1 must be entered and must reflect your company hierarchy.
INTCO - inform the associated Inter Company.
CURRENCY - You must inform the currency of the company otherwise IT IS NOT GONNA WORK.
This currency ID must be setup IN ALL the currency dimensions.
In this entity you must enter:
1-All the companies
2-ALL TECHNICAL COMPANIES for the consolidation to work
3-ALL TECHNICAL COMPANIES for VALIDATIONS (if you gonna do you validations thru script logic to
have better control of accounts and values).
ATTENTION:
JUST FOR THE TECHNICAL COMPANIES FOR CONSOLIDATION YOU MUST INFORM Y TO THE ELIM PROPERTY.
Leave it blank for all the other companies.
FLOW - you can use the one that comes with APSHELL
GROUPS
If your version of BPC is 7.0 than this dimension has two objectives.
First Objective - store all the currencies.
All you company data must be loaded with LC currency i.e. in the Legal InfoCube, you gonna see LC in the GROUPS column.
This is you Local Currency, so NEVER delete it.
These currencies must have the following properties setup:
REPORTING - Y for any other currency you insert, X for LC currency, X for Transction Currency.
CURRENCY_TYPE - R for reporting, L just for LC currency, T for the transaction Currency
Leave all the other properties blank!!!!
Edited by: JADIRM on Nov 7, 2010 3:23 AM -
Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see. -
Audio and Video do not Sync on movie or TV show playback. Voice and video do not match
I am using the latest version of Itunes and the latest version of Quicktime and Windows 7 on a newer business level computer. On any movie or any TV show I rent or purchase, the video and audio do not match on playback. I have tried uninstalling and reinstalling Itunes, Quicktime and have even reinstalled Windows 7 recently for other reasons. Nothing works. I have to hit pause for a second or two, then it will play OK for a few mins., but the problem returns. Any advice would be most appreciated.
Thanks.See if this article will help:
iTunes for Windows plays video files without any audio
http://support.apple.com/kb/TS1696 -
Still ORA-19007: Schema and element do not match Error
Hi all,
I'm new to XML and dealing with lots of information but I'm stuck with this error ORA-19007: Schema and element do not match. Read some forums and tried some possibitlities but none has solved this issue. I think this is related with some malformed headers definitions but I'm not sure, so any help will be much appreciated.
Here's what I've done so far:
This is the xml file - emp.xml:
<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
<employee team="Team Test">
<id>1</id>
<name>Nelson Branco</name>
<comment>No Comments</comment>
</employee>
</employees>
...and this is the XSD file: emp.xsd:
<?xml version="1.0" encoding="ISO-8859-15"?>
<!-- edited with XMLSpy v2006 rel. 3 sp2 (http://www.altova.com) by Nelson Branco (Oracle Corp) -->
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
<xs:element name="comment" type="xs:string"/>
<xs:element name="id" type="xs:string"/>
<xs:element name="name" type="xs:string"/>
<xs:complexType name="employeeType">
<xs:sequence>
<xs:element ref="id"/>
<xs:element ref="name"/>
<xs:element ref="comment" minOccurs="0"/>
</xs:sequence>
<xs:attribute name="team" type="xs:string" use="optional"/>
</xs:complexType>
<xs:element name="employee" type="employeeType"/>
<xs:element name="employees" xdb:defaultTable="EMPLOYEES">
<xs:complexType>
<xs:sequence>
<xs:element ref="employee" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
1) Created folders
declare
ignore boolean;
begin
ignore := dbms_xdb.createFolder('/public/Emp');
ignore := dbms_xdb.createFolder('/public/Emp/xsd');
ignore := dbms_xdb.createFolder('/public/Emp/xml');
commit ;
end;
2) Copied emp.xsd to /public/Emp/xsd in Win Explorer (via WebDAV connection)
3) Registered the schema
begin
dbms_xmlschema.registerURI(schemaURL => 'http://xmlns.oracle.com/xdb/emp.xsd'
,schemaDocURI => '/public/Emp/xsd/emp.xsd'
,genTables => true
commit ;
end ;
4) Copied the xml file to /public/Emp/xml. At this point I was expecting that the xml file was automatically uploaded to corresponding tables based on is content but it didn't happen. I didn't got any error also. When I issue:
Select count(*) from employees
...or
select y."name", y."team" from employees x, table(x.xmldata."employee") y
...got 0 rows returned
5) So then created the table:
create table emp_tab(
id number,
emp sys.XMLType
xmltype column emp
XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
element "employee";
6) And tried to insert one record based on the emp.xml:
insert into emp_tab values (1,
xmltype('<?xml version="1.0" encoding="UTF-8"?>
<!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
<employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://xmlns.oracle.com/xdb/emp.xsd">
<employee team="Team Test">
<id>1</id>
<name>Nelson Branco</name>
<comment>No Comments</comment>
</employee>
</employees>'));
...and that when I get ORA-19007: Schema and element do not match.
Any help on this will be appreciated. Thx.SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> --
SQL> define USERNAME = OTNTEST
SQL> --
SQL> def PASSWORD = OTNTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user OTNTEST cascade
User dropped.
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to OTNTEST identified by OTNTEST
Grant succeeded.
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old 1: grant create any directory, drop any directory to &USERNAME
new 1: grant create any directory, drop any directory to OTNTEST
Grant succeeded.
SQL> grant alter session, create view to &USERNAME
2 /
old 1: grant alter session, create view to &USERNAME
new 1: grant alter session, create view to OTNTEST
Grant succeeded.
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user OTNTEST default tablespace USERS temporary tablespace TEMP
User altered.
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
SQL> var schemaURL varchar2(256)
SQL> var schemaPath varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'http://xmlns.oracle.com/xdb/emp.xsd';
3 :schemaPath := '/public/testcase.xsd';
4 end;
5 /
PL/SQL procedure successfully completed.
SQL> create or replace directory XMLDIR as 'c:\xdb\otn'
2 /
Directory created.
SQL> declare
2 res boolean;
3 xmlSchema xmlType := xmlType(
4 '<?xml version="1.0" encoding="ISO-8859-15"?>
5 <!-- edited with XMLSpy v2006 rel. 3 sp2 (http://www.altova.com) by Nelson Branco (Oracle Corp) -->
6 <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:store
VarrayAsTable="true">
7 <xs:element name="comment" type="xs:string"/>
8 <xs:element name="id" type="xs:string"/>
9 <xs:element name="name" type="xs:string"/>
10 <xs:complexType name="employeeType">
11 <xs:sequence>
12 <xs:element ref="id"/>
13 <xs:element ref="name"/>
14 <xs:element ref="comment" minOccurs="0"/>
15 </xs:sequence>
16 <xs:attribute name="team" type="xs:string" use="optional"/>
17 </xs:complexType>
18 <xs:element name="employee" type="employeeType"/>
19 <xs:element name="employees" xdb:defaultTable="EMPLOYEES">
20 <xs:complexType>
21 <xs:sequence>
22 <xs:element ref="employee" maxOccurs="unbounded"/>
23 </xs:sequence>
24 </xs:complexType>
25 </xs:element>
26 </xs:schema>');
27 begin
28 if (dbms_xdb.existsResource(:schemaPath)) then
29 dbms_xdb.deleteResource(:schemaPath);
30 end if;
31 res := dbms_xdb.createResource(:schemaPath,xmlSchema);
32 end;
33 /
PL/SQL procedure successfully completed.
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 :schemaURL,
5 xdbURIType(:schemaPath).getClob(),
6 TRUE,TRUE,FALSE,TRUE
7 );
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> var xmltext varchar2(4000)
SQL> --
SQL> begin
2 :xmltext :=
3 '<?xml version="1.0" encoding="UTF-8"?>
4 <!--Sample XML file generated by XMLSpy v2006 rel. 3 sp2 (http://www.altova.com)-->
5 <employees xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation=
"http://xmlns.oracle.com/xdb/emp.xsd">
6 <employee team="Team Test">
7 <id>1</id>
8 <name>Nelson Branco</name>
9 <comment>No Comments</comment>
10 </employee>
11 </employees>';
12 end;
13 /
PL/SQL procedure successfully completed.
SQL> insert into EMPLOYEES values ( xmltype(:xmltext));
1 row created.
SQL> /
1 row created.
SQL> create table emp_tab
2 (
3 id number,
4 emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employee"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
insert into EMP_TAB values ( 1, xmltype(:xmltext))
ERROR at line 1:
ORA-19040: Element employees does not match expected employee.
SQL> drop table emp_tab
2 /
Table dropped.
SQL> create table emp_tab
2 (
3 id number,
4 emp sys.XMLType
5 )
6 xmltype column emp
7 XMLSCHEMA "http://xmlns.oracle.com/xdb/emp.xsd"
8 element "employees"
9 /
Table created.
SQL> insert into EMP_TAB values ( 1, xmltype(:xmltext))
2 /
1 row created.
SQL> -
Hi all,
I have built an installer (using WIX) that gets deployed by SCCM Application Deployment.
The Publisher and Software version fields on the "General Information" page of "Create Application Wizard" do not get populated for the specified msi.
I looked in Orca at the Property table for the msi and the Manufactuer and ProductVersion values are filled in correctly.
Where is the SCCM "Create Application Wizard" looking for the "Publisher" and "Software version" values within the msi? It would be very useful to the SCCM Administrator if these values get filled in automatically by using
the values within the msi.
Thanks in advance!
Anthony LaMarkHi,
If you could get the Manufactuer and ProductVersion values from Orca.
Use the following command creates a new application with the Manufactuer and ProductVersion.
PS C:\> New-CMApplication -Name "Contoso-test" -AutoInstall $True -Description "Contoso-test1" -Keyword "Contoso" -LinkText "Contoso-App" -LocalizedApplicationDescription "Contoso-test" -LocalizedApplicationName
"Contoso-test" -Manufacturer "Contoso-Mfg" -OptionalReference "Contoso-test4" -Owner "Contoso-testOwner" -ReleaseDate 2013/5/24
-SoftwareVersion "v3" -SupportContact "Contoso-supp" -UserDocumentation "Contoso-Help:"
For more information, please refer to the link below:
New-CMApplication
http://technet.microsoft.com/en-us/library/jj821860.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How can i fix a clip when the video and audio are not matching up?
How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.
I would try detaching the audio and the dragging the audio to the left or right until it lines up.
Maybe you are looking for
-
Can I show the column name for my legend?
I have a bunch of graphs where the legend labels (ie. the values from the column) aren't really informative (ie. simple numeric values), and are part of a dimensional hierarchy, so you might see a graph whose legend has 1, 14, 38, 141 and you click o
-
Choppy video streaming after upgrading E4200 firmware to ver. 1.0.03
Video streaming was fine until I upgraded the firmware. Is it possible to downgrade the firmware?
-
Table used for storing roles/profiles assignment in CUA lansscape
Hi, following is my cua setup master client - 999 of SRM 4.0 child client - 101 of ECC 5.0 child client - 202 of SCM 4.1 in cua all distribution works on its logical name assign to respective client. here is my question lets say user 'XYZ' in master
-
Transfer my music and foto's from Ipod to computer
My Ipod Photo was synchronised with a laptop. This one crashed and now I want to put the music and photo's to my new laptop. Nowhere can I find a way to do so. Who can help me? regards Anjo
-
HT1368 Problem locating add to wishlist button in iTunes
I am using iPad mini 2. I am using it to browse songs in iTunes. I found out that I sometimes found the add-to-wish list button, but sometimes dont. Anyone has the same problem.