Modern Replacement for Unity's IP Fax Configuration Wizard?

Just finished a cutover from CUCM/Unity 4.x to CUCM/UCONN 8.5.
All inbound faxes where being forwarded to a single email box by the h.323 gateway. Now I see that then the IP Fax Configuration Utility was then sorting out those faxes to individual users mailboxes.
What is the replacement for this on an 8.5 Unity Connection system?
Thanks!

Hi,
Cisco Fax Server, this may answer your question:
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/administration/guide/8xcucsag246.pdf
Hope that helps,
Brad

Similar Messages

Is there a modern replacement for the Nvidia 8800GS?

Like other imac users my imac 24" (2008) Nvidia 8800GS graphics card has just stopped working, I'm wondering if there is a modern replacement for this card rather than buying a (expensive) reconditioned one?

http://forums.macrumors.com/showthread.php?t=1440627
There is a lot of conflicting data on whether the graphics card in the imac is replaceable. This stems from the fact that many of the older generation imacs have the GPU soldered to the logic board. This is NOT the case with the 2008 24 inch that has the card mentioned above. It is very difficult to get to. But with planning, patience and care, it can be replaced.

[CS5] replacement for Configure Plug-ins

It appears that the (truly terrible, at least on the Mac) Adobe Extension Manager (AEM) CS5 is supposed to be the replacement for the "Configure Plug-ins" dialog and the Porting Guide does briefly talk about using it to Deploy plug-ins.
However, if I install my plug-in(s) without using AEM using an alias or directly into the Plug-ins folder then it doesn't appear in AEM at all. This particular plug-in doesn't have a UI so need for my support people to see at least a version number.
Can anyone point to some documentation on how to make your plug-ins appear in the AEM list?
It also doesn't appear that the Debug version of InDesign even appears in the AEM list of applications.

Adam,
We aren't going to force our users to have to deploy using Adobe Extensions Manager and all of the InDesign plug-ins appear there. Maybe I just need to start looking at what they are doing to figure out what is going on.
Thanks for the suggestion though, that is essentially what I did yesterday as a workaround.
Nick

Unity Data Store for unity 8

Guys,
Im installing unity 8.0.3 , but unfortunately stuck at " cisco data store" .When i searched google itsays to install "sql server 2005 sp3" or"sql server express 2005 sp3". I installed express , but unity assistant still shows the result as "failed".
Any help from u guys will be appreciatable.

You should take a look at the "Read Me" file as it states that the Unity Data Store DVD for Unity 8 is NOT available for download. Refer to the following:
Do Not Use the Cisco Unity Data Store 2000 Disc from Cisco Unity 7.x and Earlier to Upgrade to Cisco Unity 8.0
If you are upgrading to Cisco Unity 8.0 and reinstalling software on the Cisco Unity server (for example, because you are replacing the server or upgrading to Windows Server 2003), you must use the Data Store 2000 disc that ships with Cisco Unity 8.0. The Data Store 2000 disc that shipped with earlier versions of Cisco Unity has a different directory structure, and the Cisco Unity System Setup Assistant, which guides you through installing and configuring Cisco Unity 8.0, will not recognize the Data Store 2000 disc that shipped with Cisco Unity 7.x and earlier. (If you paid for an upgrade to SQL Server 2005, we will ship you a Data Store 2005 disc with the rest of your Cisco Unity software.)
The Cisco Unity 8.0 version of the Data Store 2000 disc is not available for download on Cisco.com. To perform an upgrade that requires reinstalling software on the Cisco Unity server, you must either wait for the Cisco Unity 8.0 installation discs to arrive or manually install SQL Server 2000 or MSDE 2000. Manually installing the application is not documented and, therefore, not supported.
There's your answer. You need to order the upgrade kit from Cisco in order to get the proper DVD.
Hailey
Please rate helpful posts!

QuickJog 1.0 - Shuttle/Jog Replacement for Premiere CS6... almost

quickJog 1.0 - "fixing what Adobe broke in CS6"
a shuttle/jog replacement for Premiere/Prelude CS6
* see below for download links and instructions *
Introduction
I'll waste no time in expressing my opinion on this one: I loved the jog control in previous versions of Premiere, and a small part of my heart died when I realised that those beloved controls couldn't be reinstated in CS6 (though an ever larger chunk died when I realised that Q and W don't work by default in Prelude... ).
JKL is great as a concept, but in practice, not very responsive - it's difficult to make precise jumps in speed quickly, and I'd hate to log footage in CS6 using the JKL keys alone.
It was whilst reading through a different thread on the forums that I had an idea. Why not just jog with the middle mouse button? REAPER uses a similar idea to great effect for scrubbing.
And so the journey began.
Installing/using quickJog
Pre-requisites
Glovepie is only available for Windows. The script, therefore, only works on Windows.
Sorry Mac users.
To use quickJog, you'll need to download the following:
GlovePie, from glovepie.org. Doesn't matter whether you grab the version with or without emotiv support, as long as it's a recent version
The quickJog script, from bit.ly/getQuickJog (unreserved thanks go to Creative Inlet Films for hosting this)
A mouse with a middle-mouse button/clickable scroll wheel
You'll also need to ensure:
The JKL keys have not been re-mapped in Premiere. This is essential, as quickJog 'presses' the JKL keys to alter the jog speed in Premiere.
Installation/usage
Is currently as simple as...
Start Glovepie
From the File menu, select Open...
Navigate to wherever you unzipped the quickJog script. Open it.
Click the Run button
Click the [ .] button at the end of the menu bar to minimise Glovepie to the system tray
To shuttle, click on the program monitor, source monitor or trim monitor, and scroll the mouse wheel. This functionality is built-into Premiere. You can hold Shift for bigger jumps.
To jog, click and hold the middle-mouse button over the source monitor, program monitor, or timeline, and move left or right to increase/decrese the jog speed (just like the old jog slider).
QuickJog tracks the position of the mouse itself, not the position of your mouse cursor, so don't worry about the cursor touching the edge of your screen.
Keep your eyes on the video, not the mouse!
To exit, right-click the glovePie icon, and select Exit.
quickJog works in Prelude too, which is pretty cool.
Links/Misc
HOW AWESOME WOULD SOME EXTRA BITS OF INFORMATION BE FOR THE WORLD? Like information on how to tweak the configuration variables??
Pretty awesome, I'd say James. Have you thought about actually writing this section, then?
Paha! Don't be crass.
Aww.

I stand humbly informed!
In hindsight, I'm not surprised that the JKL keys are a popular choice amongst editors (especially for those who've moved across from other NLEs), but it does rest somewhat uncomfortably in my heart. It feels like Adobe have replaced the pedals and gearstick in my car with a keyboard: not great for those moments when a child runs into the road.
The Shuttle Pro (and Bella to my knowledge?) controllers emulate left/right arrow keypresses to do their work, making the playback 'glitchy' during shuttle operations - I don't like that. I didn't particularly like the feel of the Shuttle Pro when I tried it either. I do like controllers like this (I have one), but have been working for some time on interfacing between the Sony 9-pin protocol and Premiere.
As such, my intermediate preference has been to use a graphics tablet (with a keyboard) for NLE work - hence why having the jog/shuttle controls on screen was so darn useful! Now that I have quickJog mapped to the stylus eraser, edits are much faster.
Quick aside: Huge commendations on just how much can be mapped to keyboard shortcuts in Premiere, huzzah!

New Macbook a good replacement for 12" Powerbook?

I think, besides the inch in display difference, that the new macbook WOULD HAVE made a GREAT GREAT GREAT replacement for users loving or wanting the portability, yet pro versatility of the old 12" Powerbooks. I think however that Apple has missed the mark in one BIG BIG WAY! Firewire. People who wanted something like the 12" powerbook wanted the power of the Macbook Pro in a smaller package. Apple hit the nail on the head with incorporating the same graphics performance, by using aluminum, by making it lighter, and by putting in the illuminated keyboard (only in the 2.4 model though). But on the last detail, they missed it. Firewire. there is no workaround. period. Why preload the systems with iMovie when you can't import video from MOST modern digital camcorders? WITHOUT EVEN introducing a new port with adapters (like they did with the Display Port). I think I would've sold my old macbook pro and had instantly purchased the new macbook if Apple had just included that one VITAL port. I would even prefer them putting it in the place of one of the two USB ports. But without being able to import video from my NEW minidv, there is just no way i could buy that macbook and call myself a proud mac owner. What kind of digital hub would that be? Isn't your slogan "works right out of the box."...? what do you guys think about the new macbook being a 12" powerbook replacement??

I have the same situation. I wanted to upgrade from my 12" Powerbook and would move up to the 13" screen of the new MacBook (15" is much too big for my needs). Another family member has the 15" Powerbook and has always liked my smaller size. I was ready to order 2 of the 13" MacBooks and was then stunned to see that Firewire was missing. I have a Sony DV camcorder for movies. It appears Apple expects me to use my old Powerbooks to input the video into iMovie and then transfer it over to my new MacBook. This is not the cutting edge Apple Computer Company that I have been a customer of for 25 years.
If Apple wants to add firewire to the new MacBooks, develop a USB / Ethernet to firewire adapter, or add a 13" MacBook Pro (w/ firewire) to the line-up, they will have a customer. Otherwise, I will hold onto my old Powerbooks until this is corrected.

APEX Listener as a replacement for modplsql ?

Will APEX Listener ever be, or is it able to be now, a replacement for modplsql driven applications that are not APEX. It seems that it already takes care of everything needed to be a full scale modplsql replacement... In all honesty looking to see if it is possible to reduce the future licensing load on some of my clients if they wanted to build more redundancy into their front-end web applications. They wouldn't be reducing what they pay, as they are still in for the Forms installs in app server, but they are inhibited on their redundancy growth outward since adding new licenses to cover these new servers would be cost prohibitive. This is mainly a third-party product (SGHE's Self-Service Banner) that is driven off of modplsql, so rewrite isn't an option.
Thanks for your input,
-Richard

As of the last EA version, it depends on which modplsql features your application uses. The main modplsql features that are not yet supported are:
Basic database authentication - The listener must be configured with a single username and password and cannot dynamically change the database connection at run time.
Multiple DADS - Each listener is configured for one and only one database connection. However, there is a way to install multiple copies of the listener, and configure each for a different database connection.
Dynamic parameter passing - There must be a one to one relationship between fields on an HTML form (or query string variables in the URL) and the non-defaulted parameters of the called procedure. Name and Value arrays, with the "!" before the procedure name in the URL are not supported.
CGI environment variables in the DAD.
Oracle MAY support some or all of these features in the production version, or in some future version. We can probably influence this by telling Oracle what we want - but no guarantees. Kris Rice tells me that the APEX Listener was written to be extendable, so once Oracle gives us some documentation of how to extend it, some enterprising programmer may add some of these features as an extension.

Where can I get window os 2003 for unity 5.0(1) for MCS7835I1 platform?

Dear All,
I didn't receive any DVD on window os 2003 for unity 5.0(1) for MCS7835I1 platform for my purchase.
I only have got the IP Telephony OS 2003.1.1 which stated in the document that it is not for Unity.
So I tried to open case to TAC but they asked us to look from Microsoft but I believed that normal window os will not be able to install on MCS sever, am I right? So where actually can I look for this window os?
Thanks in advance
Jarunee

Hi Jarunee,
You have 2 options:
1) You purchased the MCS-7835-I1-ECS1, I would expect this one to come with the platform configuration disk (PCD). If you did not get this you will need to contact customer service as outline in this document
2) You purchased another flavor of this server model such as MCS-7835-I1-IPC1 or directly from IBM. This will not come with the PCD. For this you will not get a PCD and you will need to supply the operating system yourself.
The installation guide covers both scenarios to set up Unity either with PCD or self supplied OS.

Replacement for CCP?

Does anyone know if ever Cisco will come out with a replacement for Cisco Configuration Pro? I'm looking at upgrading my desktop to Windows 8 (on windows 7 now) and I've heard there are issues. I've always despised the fact that CCP required Internet Explorer, why did Cisco go this route and not make something stable like ASDM? ASDM is much more stable, and runs on other platforms (and not just windows).
Also, my co-workers and I have been having issues with CCP crashing on us, or hanging, etc. It's really not very reliable!

Nothing's been announced.
I wouldn't be surprised to see CCP updated for Windows 8 compatibility. I would be (pleasantly) surprised to see it re-architected to not be built on the IE foundation.
ASDM (Java-based), while better, has its issues - every time a Java update comes out I cringe that it will break ASDM. Only happens about 30-40% of the time. :-p

T.37 OnRamp and OffRamp fax configuration- Problem

Hello !
I have configured CISCO 2901 call router with T.37 OnRamp and OffRamp fax configuration.
I have configured SMTP for receiving fax from call router. I am using Novell GroupWise 8 e-mail application.
I could able to receive fax from call router,
But i m not able to send fax to outside world via call router
Because while sending fax we are using outsideno@callrouterip address ( ex: [email protected])
My Novell GroupWise giving error like unable to find e-mail address in mail box ( Error : can not deilver message to internal loop address )
Reason : Mail box not able to find address because of every time if you use No like this [email protected] . Mail box not able to recognize and unable to forward to call router,
I try to use windows FAX service to send fax to VOIP ( call router ), that does not work.
Is there any tool or client setup we would able to use and deliver mail to call router to send fax.
Until or else their is no use for using T.37 OnRamp and OffRamp fax configuration in call router
Thanks
Best Regards
Jayaraja R

fax receive called-subscriber $d$
fax interface-type fax-mail
mta send server smtp.domainname.com port 25
mta send subject Fax-Mail Message
mta send with-subject both
mta send postmaster [email protected]
mta send mail-from hostname callrouter.domainname.com
mta send mail-from username fax
mta send return-receipt-to hostname domainname.com
mta send return-receipt-to username fax
mta receive aliases X.X.X.X
mta receive aliases callrouter.domainname.com
mta receive maximum-recipients 5
application
service faxmail_offramp flash:app_faxmail_offramp.2.0.1.1.tcl
service onfax flash:app_faxmail_onramp.2.0.1.3.tcl
global
service alternate default
I hope this configuration would be sufficient ,
Thanks
Best Regards
Jayaraja R

Replacement for ISA/TMG

Hi,
I'm looking to setup a proxy server in our DMZ for our Outlook Anywhere clients and I noticed that Microsoft doesn't offer any firewall software anymore. Is there a replacement product for ISA/TMG?

Microsoft UAG is built on TMG, not a replacement for it. It may be able to do some or all of what you need. Note you are not licensed to open the "TMG part" and configure it directly when using UAG. Here's an article about
publishing Outlook Anywhere on a Forefront UAG portal.
There are also third-party solutions mentioned in
this thread, though as you may notice there are some features (certificate-based authentication) that may or may not be supported. The impression I've gotten over the last year or two is Microsoft pretty much assumes everyone has an F5 already.
We use a Cisco load balancing device.
Chris

Replacements for FS and Marshall Muffler cases

My students have previously taken an ERP course that included the Mueili Simulation Game. In the next course, I had them do the Fitter Snaker configuration exercises followed by the Marshal Muffler case. Now, it seems that the Fitter Snack configuration series of exercies will no longer be available, and is being replaced by the Global BIke case -- yet, I cannot find any material for the Global Bike case -- when is it to be avaiable?
Also, the Marshall Muffler case does not seem to be available either -- I cannot find a reference to it in the UA site. If it is no longer available, what is a good replacement for it? I have not yet looked at the Kite case to see if it is a good candidate to replace Fitter Snacker or Marshall Muffler.
What I would like is a series of exercises that takes students through some configuraiton, and then forecasting, production, purchasing, selling (like the Fitter Snaker configuration). After that, I would like them to do another case without detaied instructions to do some configuraiton, produciton, purchasing, sellling (like Marshall Muffler).
The BPI series of exercises might do some of the above.
Thanks for any suggestions.

The Marshall Muffler case is still available along with all of the otherFitter Snacker configuration materials. Navigate to:
https://cw.sdn.sap.com/community/uac/bpm
Then scroll down to Fitter Snacker configuration and download that material.
I will be providing a modified module 12 document for the community network shortly. There are a couple of fixes needed for the ECC 6.0 version that I didn't catch the first time I revised the documents.

Replacement for PC-TIO-10

I am currently using a PC-TIO-10 in an application on a Windows 95 xox. I want to upgrade my control system. I cannot get my Windows 2000 box to recgonize the PC-TIO-10. Is there a PCI replacement for this card?

You should be able to get your Win 2000 machine to recgonize your PC-TIO-10 board. You may have a bad installation of NI-DAQ. I would suggest uninstalling NI-DAQ, take the board out of the computer, reinstall the latest version of NI-DAQ from ni.com. Then follow the procedure here to configure the board.
http://ni.com/support/daq/board.htm
There is a PCI counter board that you could replace the PC-TIO-10 board. It is the NI 660x board, there are three different versions. I would suggest taking a look at either the PCI-6601 or the PCI-6602 boards linked below.
PCI-6601
http://sine.ni.com/apps/we/nioc.vp?cid=3589〈=US
PCI-6602
http://sine.ni.com/apps/we/nioc.vp?cid=1123〈=US
Let me know if you have any questions about these two boards.
Br
ian

Replacement for Appleworks "Draw" Program?

Hi -
With Apple's announcement that it will no longer upgrade or support Appleworks, can anyone recommend a simple (and inexpensive) replacement for AW's Draw program? I use it a lot for creating CD/DVD covers and inserts and would love to find a more modern and -- but non-complex -- replacement. Thanks for any recommendations.
Shelly

With Apple's announcement that it will no longer upgrade or support Appleworks, ....
I guess I don't understand the premise here. It's been years and years since Apple has supported AW in any reasonable way, and it's been known or at least accepted for some time that nothing further was likely to happen after 6.2.9.
The only thing that's changed is that it's no longer sold in the Apple Store. The support page (http://www.apple.com/support/appleworks/) still exists, downloads and links are still alive from there, and of course there is still this forum and the rest of the support structure in place (knocking softly on wood).
At the end of the day, why start rushing around now to look for a replacement? If it meets your needs and will continue to do so, then you should, and should be able to, continue to use it.
In a different thread in a different forum I came across a post which stated that AW would not be usable on Leopard. If that's the case, it's come as news to me — is it some announcement that I've missed, some connection I've not made?
If so — so sad, too bad, and will just delay my transition into the new OS.

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Modern Replacement for Unity's IP Fax Configuration Wizard?

Similar Messages

Maybe you are looking for