Modes Question

I have?3 qusestions:
)Is there any difference between sound play back lat say 24/48khz in Enterteiment Mode and Audio Creation mode if awrything(EQ and etc)?is on flat
2)Entertaiment mode has to unoying bottons? Bass and Treble and thay are on default are at 50%, so my question is is 50% is flat or 0 % is flat, i am confused?
3)If i have music with 24/96khz can i playback it in audio creation mode to get actualy this24/96khz hight quality sound or i need swtitch to entertaiment mode?
thank u

anybody will answer [email protected]

Similar Messages

[Other 865 Series] MSI 865PE Neo2-V and Dual Channel Mode Question

Hello, I have a quick question regarding dual channel mode with my current motherboard. I have an MSI 865PE Neo2-V and am wondering if it is possible to enable dual channel mode while having three RAM modules inserted in the motherboard.
For example, I currently have one 512MB PC3200 module in my computer. If I purchase another 512MB module and run them in dual channel mode, will it be possible to buy a 1GB module or another size module, and still have all three slots run in dual channel mode? Or is dual channel only operational on this motherboard if only two of the three slots are occupied?
Thanks.

Dual channel requires an even number of sticks.

SSRS 2014 with SharePoint 2013 - Integrated Mode vs Native Mode Questions

Hi,
We are using SharePoint 2013 and SQL Server 2014.
We are building a number of SSRS Reports that pull data from SQL Databases. (Pl note, we are not pulling any data from SharePoint Lists)
We have to make a choice between running the Reports in Native Mode or SharePoint Integrated Mode.
We saw this link: https://technet.microsoft.com/en-us/library/bb326290(v=sql.105).aspx - but it has no updated version for SQL 2014.
We have questions on which one to choose - based on what criteria, based on performance (which will be faster), other benefits, pros and cons and also on things that work only on SharePoint Integrated Mode and things that work only on Native Mode.
Would appreciate guidance on the above.
Thanks
Karthick S
Karthick S

Hi Karthick S,
If you had install Sharepoint server, then configure the Reporting Services in Sharepoint mode to take advantage of the Sharepoint. However, when you run a report in the SharePoint integrated mode in SQL Server Reporting Services, the report may run noticeably
slower than when you run the same report in native mode.More details information please reference to:General overhead performance differences when you view reports in SharePoint integrated mode versus in SharePoint
native mode
For more information about the features supported by Reporting Services in Sharepoint Integrated Mode(SSRS 2014), please see below article:
Reporting Services Report Server (SharePoint Mode)
Similar thread for your reference:
SSRS naitive Mode VS Share Point Integrated Mode
SQL Server Reporting Services - Native Mode or SharePoint Integrated Mode?
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Preview Mode question

Hi All,
I'm new to the iMac, having just come from the PC world, and am hoping you can help me with a couple questions. I'm a photographer and in a PC opened my photos in preview then when I wanted to edit one, I'd right click and then choose the program I wanted to open the photo in (Photoshop). How do I do this from preview mode, or can I? I don't like selecting images to open from the thumbnails, because they're just not big enough to see the photo clearly.
Second question. Windows 7 allows you a folder view that opens the folder slightly, so you can see a couple of the contents inside. I don't believe Mac has that option but I thought I'd check. It's really handy, and didn't realize how often I'd used it.
Thanks!!

Using the Finder's coverflow or column view is one way to get a little bit larger preview, and QuickLook can be used for an even larger (or full screen) preview. Right-clicking on a file will let you choose what to open it with (you will need to exit QuickLook if that is what you are using at the time).

How to restore "Always ignore" selection pressed on Low IL compat / EPM mode question in IE10 on Windows 7 x64?

How to restore "Always ignore" selection pressed on Low IL compat mode / EPM question in IE10 on Windows 7 x64?
In a previous question I asked where the Whitelist is and how to modify it but now I have clients that seem to gotten stuck after pressing "Always ignore" and then the question to run outside EPM does not come up anymore and also the Whitelist
stops working.
I need to get the "Question" back so the user can select to disable EPM on a per site basis (and to re-enable the Whitelist already set by login script).
/Aldus

same as the ActiveXFiltering sign
a "gray" circle
So it's not the same. ActiveXFiltering is definitely blue. And there would be another indicator in the Address bar.
still hoping that Microsoft And Adobe solves this BUG. It has to be one of the most common cases of all when it comes to an
external viewer embedded in IE11.
You have just reminded me of another closely related case I have to test when I get to a W7sp1 Pro X64 system I have intermittent access to
http://answers.microsoft.com/en-us/ie/forum/ie11-windows_7/videos-still-will-not-play-in-ie-11-you-force-us/5b0b6d45-0c80-411e-adc3-ca90e194539a?page=2
So the common factors are embedded media, IE11 and W7sp1. In the case of the video though I'm not sure where W8.1 is getting its control--seems not to be from Flash support and not something that is controllable by Manage Add-ons. But I
doubt that it really matters which control it is; the type of it probably matters more.
In case it gets us somewhere diagnosing your case, can you try that example too please?
Robert Aldwinckle

Maintenance Mode Questions

Hi All,
I have SCOM 2012 SP1 CU5 and have few questions on Maintenance Mode (MM).
1) I put my 800 agents in MM for 300 minutes and they get into "Not Monitored" state. When I pull all these 800 agents out of MM together they remain in "Not Monitored" state for about 2 to 3 hours. They get into healthy state slowly
during these 3 hours. Is this expected? Shouldn't they all get healthy quickly? Is the number of agents slows the process and so they take time to get into Healthy State?
2) When I pull my agents out of MM and after they get healthy, I get flood of alerts for them like Health service heartbeat failure, failed to connect to computer., low free disk space, etc. Why is this so as they were in MM and not healthy?
3) When the servers come out of MM, will all the workflows (rules and monitors) run again and generate alerts? even if their alerts (previously created) are already Active in SCOM ?
4) While rebooting the SCOM servers during maintenance activity, what should be the sequence among Management Servers, DB server, DW Server, Reporting Server, Gateway Servers, Web console servers ?
Thanks, S K Agrawal

1) For agent "not monitor" after MM, Try to restarting the System Center Management Health service on the agent-managed computer
2) For What to do for a not monitored state, you can refer below link
http://technet.microsoft.com/en-us/library/hh212723.aspx
3) Yes, after server come out from maintenance mode, it will generate alerts and work normal.
4) Sequence will be DB server, DW Server, Management server, Reporting server, Gateway server, web console Server.
Also you can refer below link for more info.
http://support.microsoft.com/kb/2704170/en-us
http://support.microsoft.com/kb/942866/en-us
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Preinstall mode question

SunOS 5.10
DB 11.2.0.2.3
EBS R12.1.3
I am reviewing the readMe's for some patches I may be applying to an EBS R12 environment.
The readMe's say to apply the patch in preinstall mode.
From the reading I have done about adpatch and preinstall mode it seems that you would normally use preinstall mode for example, when you are upgrading from 11i to R12.
It seems that each patch run in preinstall mode is staged rather than applied and only applied once the upgrade is complete. Have I read the documentation correctly?
My question is this, if I am already on an R12 environment should I be installing these patches in preinstall mode as the readMe says or as normal "preinstall mode=n"?
Thanks in anticipation.

It seems that each patch run in preinstall mode is staged rather than applied and only applied once the upgrade is complete. Have I read the documentation correctly?adpatch will copy the files to your $APPL_TOP which used by the main ugrade patch driver.
Please see "Pre-Install Mode" section in http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531062.htm#5281339 for details.
My question is this, if I am already on an R12 environment should I be installing these patches in preinstall mode as the readMe says or as normal "preinstall mode=n"?Usually, you should not apply the patch in preinstall mode if you are already on R12 and you will need to apply it manually unless you were instructed to do so by the patch README file. Please always refer to the patch README file for the correct mode you need to use.
Thanks,
Hussein

HVX200 native Mode Question

Hey guys, kind of a newbie question here. We're running FCP 6 and were transferring over footage shot on an HVX200 in 24PN mode but it's showing up in FCP as 29.97. Shouldn't it be showing up as 23.98 in native mode? When I tried transferring off another camera it worked fine. Is there a setting on the camera I need or is one of the camera's defective in some way?

Did you shoot 720p or 1080p?
Shane

Off Bridge Mode Question

Trying to determine how my Airport Extreme went into off-bridge mode....noticed my A.E. was blinking the amber light...after determining it was not an update alert, I unplugged the box from the socket, and detached all wires from the back of it...replugged, greenlight eventually came back on, but could not get onto the internet....called the 1-800 Apple number....tech determined I was indeed in off-mode, we fixed it, I'm back onto to the internet...forgot to ask her if unplugging the unit was what made it go into off-bridge...don't want to call back....but will if commnity can't answer the question....that is he question...did unplugging the unit, reset it into off bridge mode, or did I manipulate it within the dialogue box, and inadvertantly did something to put into off-bridge? Thanks for any and all hlep

Recycling power to the base station should NOT make any configuration changes. However, performing any of the potential resets can. The default mode of all of the Apple routers is NOT to be in bridge mode.

DDTS-100 and S750 Installation / Test Mode Question

I got a DDTS-100 decoder for Xmas and just bought the gigaworks S750's yesterday to replace my old DTT-3500. I plugged the decoder and sub for S750 into the wall and hooked the two up via the 7.1 cable. I then plugged the front and centre speakers into the sub. I'm not going to set up the side and rear speakers for a couple of days as I'm painting. Anyways, I then powered on the sub (green light comes on) and the decoder (it lights up fine). The decoder is set to 5.1. There are no other inputs hooked into the decoder. Then using the remote I hit test mode, the decoder goes in to test mode but I get nothing out of the speakers. I've cranked the volume way up and still get nothing. Do I have to plug all seven speakers in for test mode to work? Do I have to have an analog or optical input, or should test mode just work by itself. Do I have to plug in the little control centre which comes with the S750's, I didn't bother because I have the decoder.
Any ideas on why I'm not getting any sound? Any other suggestions of things to try?
Thx.

Thx, that resolved the issue, I didn't think I'd need it because I had the decoder which basically does the same thing.
One question about the upmix. Because I am using the DDTS-100 with the gigaworks S750's, does it make more sense to enable the upmix through the control centre for the speakers or through the DDTS-750. Would it make more sense to use the S750 as there are a couple of different upmix modes there?
Also, with the volume control for the speakers, should I just set the volume on the Control Centre which came with the speakers to a level such as 75% and then use the DDTS-100 to control the volume levels after that, or should I crank the Control Centre up higher?
Thx.

Cisco Jabber for Windows // Softphone mode // question to CFS config

Hi Community,
I have a question to the follwoing problem.
Hope anybody can help me or give me an hint.
Our customer have an CUCM / IM&P in version 10.5 cluster.
He wants to use the fqdn in the CFS device. I try to look into the CFSSEPXXXXXX.cnf.xml and saw in the
<processNodeName>HOSTNAME instead of FQDN</processNodeName> only the hostname.
Its possible to get the fqdn in this field ? Where I have to change the Settings in CUCM / CUP ?
Thanks in advanced for every hint,
Stefan =)

Hi Mohammed,
thanks for your fast reply.
Do I have after changing the fqdn on cucm to restart the tftp service as well ? Or should the client logoff / login again ?
thanks,
Stefan

Single User Mode Question

I use single user mode to do fsck because doing it on a live disk takes way too long. I was wondering if there is a way to repair permissions from single user mode. Thanks

1. what does AFAIK mean?
As Far As I Know
2. What I have gathered is that it is near next to y difficult to repair permission fro the CLI and single user mode.
Correct. You can't use diskutil because the disk framework isn't loaded. You can do it if you're booted from an install DVD, though.

Iview Isolation Modes Question

I have some strange situation here. I have a page that contains one embedded iView and 3 isolated url iViews.
When I try to use client side eventing to communicate between two url iViews. Said : URL Iview "1" raiseEvent "A" , and only URL Iview B subscribe to Event "A", but the problem is - somehow the embedded iView react on Event "A" too, although I never subscribe to "Event A".
Thanks for your suggestion on my problem in advance.
Kent

You are totally make sense. My initial design is to let the input field iView to be embedded, and the else of the data display iviews to be url.
I will work around the isolation modes, trying to make every iviews to be url.
Thanks for your great suggestion.
I assigned full points to you.
Kent

Superdrive/target disk mode question revisited

My mbp has a broken superdrive. I have connected my mac mini to my mbp and am running the mini in target disk mode. my problem comes with installing software -- when the software asks me to insert the dvd, and i put it in the mini, it does not recognize me as having inserted the dvd, and i can't progress in the installation without inserting said dvd. is there a setting i need to change to have it read the mini's superdrive as default? thanks!

Hi dmmd,
What model of "mini" is it, and what OS version does it have running on it?
There are now ways of using another mac's optical drive for software installation and the like which don't actually require TD mode to be used.
Have a look at http://manuals.info.apple.com/enUS/Snow_Leopard_InstallationInstructions.pdf for a good example.
Cheers
Rod

Firewire target disk mode question

I am using firewire target disk mode to copy some files, but can only see the system drive on the slave computer, what do I do so I can see the secondary hard drive on the slave computer?

You'll have to swap drives. TDM only sees the MASTER drive. If your drives are jumpered MASTER and SLAVE then switch them. If the computer uses CABLE SELECT then swap the position of each drive on the ribbon cable.

Modes Question

Similar Messages

Maybe you are looking for